Marketplace products from category HPLC components focused on HPLC - page 2

Agilent G1379B is a four-channel vacuum degasser for efficient removal of dissolved gases from HPLC mobile phases.

Agilent 1260 Infinity G1379B is a four-channel HPLC vacuum degasser with flow rates up to 5 mL/min per channel and a 1 mL internal volume per channel.

Agilent G1379B four-channel vacuum degasser for continuous removal of dissolved gases from mobile phases in HPLC systems.

Agilent G1379B four-channel vacuum degasser for continuous removal of dissolved gases from mobile phases in HPLC systems.

Agilent G1379B is a four-channel vacuum degasser for efficient removal of dissolved gases from HPLC mobile phases.

Agilent G1379B four-channel vacuum degasser for continuous removal of dissolved gases from mobile phases in HPLC systems.

The purge valve seal cap for pump modules used in Agilent 1100, 1120, 1200, 1220, 1260, and 1290 LC systems. It is intended for service and maintenance and helps preserve reliable purge valve sealing and pump performance.

The Waters ACQUITY UPLC 30 cm Column Heater/Cooler is an actively controlled column compartment for ACQUITY UPLC systems, providing heating and cooling from up to 15 °C below ambient to 65 °C. It supports as many as six serially connected columns up to 300 mm long and integrates with selected ACQUITY UPLC H-Class, H-Class Bio, and I-Class configurations.

Complex modular Shimadzu LC-10 HPLC system with two pumps, autosampler, column oven, degasser, PDA and fluorescence detectors, system control, and automated fraction collection. Suitable for gradient analysis, spectral detection, and collection of separated fractions.

The Agilent InfinityLab MS Flow Modulator Valve enables controlled flow modulation between LC and MS in Agilent 1290 Infinity II systems and supports stable, reproducible LC/MS analyses.