Gas chromatography (GC) is a powerful analytical technique used to separate and analyze compounds in a mixture. Whether you're working in pharmaceuticals, environmental testing, or food safety, understanding the key components of a gas chromatograph is essential for accurate and efficient results.In this article, we will delve into the primary components of gas chromatography, including the injector, column, detector, and carrier gas—and explain how each plays a critical role in the separation and analysis process.By mastering these elements, you can optimize your GC setup for precise and reliable outcomes. Let's explore each component in detail:<h3>Sample Injector</h3>The injector is the starting point in the <a target="_blank" rel="noopener noreferrer" href="https://www.phenomenex.com/techniques/gc">gas chromatography process</a>, where the sample is introduced into the system. In GC, the sample must be vaporized into a gas before it enters the column. The injector serves this purpose by heating the sample to its gaseous state. There are many types of injectors, Split/Splitless, PTV, on column.The most common injector is the Split/Splitless injector that can be used in split mode or in splitless mode:<ul><li>Split Injection: This mode allows a portion of the sample to be sent to the column while the remainder is vented. It is useful for high-concentration samples to prevent system overload.</li><li>Splitless Injection: In this mode, the entire sample is introduced into the column, making it ideal for trace analysis where even minute quantities need detection.</li></ul>Proper choice of injector type and proper control of injection conditions, such as temperature, sample size, injection mode are crucial for achieving reproducible and reliable results.<h3>Carrier Gas</h3>In gas chromatography, the mobile phase is represented by carrier gas, which transports the vaporized sample through the column. The carrier gas is an inert gas, such as helium, nitrogen, or hydrogen. The choice of carrier gas can influence the efficiency of the separation process.<ul><li>Helium is the most used carrier gas due to its inertness and high flow rate.</li><li>Hydrogen offers faster analysis times but requires careful handling due to its flammability.</li><li>Nitrogen provides a cheaper solution compared to Helium, although it's slower than helium or hydrogen.</li></ul>The flow rate and pressure of the carrier gas need to be carefully controlled to ensure that the sample moves smoothly through the system and adequate efficiency is generated.<h3>Column/Stationary Phase</h3>The column is the heart of the gas chromatograph, where the actual separation of compounds occurs. <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/gcms/products?category=7&amp;manufacturerItems=50">GC columns</a> are typically long, thin tubes made from stainless steel or fused silica. They are coated with a stationary phase, which interacts with the components of the sample as they pass through.<ul><li>Packed Columns: These contain small particles of stationary phase material and generally have a larger volume. While they are less efficient than capillary columns, they can be suitable for specific applications.</li><li>Capillary Columns: These thin tubes are coated with a stationary phase, offering higher resolution and faster analysis times due to their smaller diameter.</li></ul>The length, diameter, and type of stationary phase of the column are important factors that affect the efficiency and selectivity of the separation. The choice of stationary phase (polar or non-polar; liquid-coated or solid) affects how different compounds interact with it.As the sample moves through the column, compounds separate based on volatility and their affinity for the stationary phase, resulting in distinct peaks in the chromatogram.<h3>Detector</h3>Once the sample has passed through the column, it reaches the detector, where individual components are identified and measured. There are several types of detectors, each suited to different applications:<ul><li>Flame Ionization Detector (FID): One of the most commonly used detectors in GC. It measures ions produced when organic compounds are burned in a hydrogen-air flame. FID is highly sensitive to a wide range of organic compounds and offers a broad linear dynamic range.</li><li>Thermal Conductivity Detector (TCD): Detects changes in the thermal conductivity of the gas stream as analytes elute from the column. It is a universal, non-destructive detector, but is generally less sensitive than FID.</li><li>Electron capture detector (ECD): A very sensitive and selective detector used to detect chlorinated compounds it is easily contaminated and requires very pure and dry carrier and makeup gases and difficult maintenance.</li><li>Mass Spectrometer (MS): Provides structural information, aiding in both identification and quantification. Requires advanced and trained users and it’s difficult to maintain.</li></ul>The choice of detector depends on the type of analysis being performed and the sensitivity required. Each detector converts physical or chemical changes associated with the analytes into a measurable signal, producing a chromatogram that reflects concentration and retention time.<h3>Data System</h3>Although not a physical part of the chromatograph, the data system plays an integral role in processing and interpreting the signals generated by the detector. Modern gas chromatographs are equipped with software that converts detector signals into chromatograms—visual representations of the separation process. The software allows users to quantify and identify the components of the sample based on retention times and peak areas.<h3>How to Read a Gas Chromatogram?</h3>Interpreting a gas chromatogram involves understanding its essential elements, such as peaks, retention times, and the overall data for qualitative and quantitative analysis.<h4>The Nature of the Sample</h4>Begin by considering the sample's characteristics; different samples, such as environmental pollutants or food components, may exhibit distinct peak patterns. Recognizing the baseline (the flat line representing the signal without analytes) is crucial for identifying peaks accurately. While well-defined peaks indicate successful separation of components, poorly shaped or broad peaks may suggest issues with the separation process. For instance, if a mixture is injected and three peaks are observed, it indicates the presence of three different compounds in the sample. Conversely, when evaluating the purity of a sample, one would anticipate observing a single peak. Ideally, the chromatogram should reflect this expectation, confirming the sample's purity.<h4>The Identity of the Sample</h4>Retention time (Rt) is a critical factor in identifying the compounds present in the sample. Each analyte has a characteristic retention time that can be compared to known standards or literature. To confirm identities, a standard mixture should run alongside the sample; this allows to correlate retention times with specific compounds. If available, utilizing MS in conjunction with gas chromatography (GC-MS) can provide additional structural information, enhancing identification accuracy. With HR-MS or MS-MS detectors, unknown compounds can be identified by matching perfectly the Molecular weight or by matching the fragmentation pattern.<h4>The Amount of Sample</h4>Quantifying analytes involves analyzing peak area or height, which is directly proportional to the concentration of the analyte in the sample. A calibration curve constructed from known concentrations can help relate peak areas to actual concentrations. It is essential to consider the detector’s sensitivity and the limits of detection, as peaks below a certain threshold may not provide reliable quantification.

Basic Principles of Gas Chromatography - Separation and Analysis

ISC 2026 - Day 2

ISC 2026 - Day 3

Article

Events

Academy

Phenomenex is a global technology leader committed to developing novel analytical chemistry solutions that solve the separation and purification challenges of researchers in industrial, government and academic laboratories.

Phenomenex

The International Symposium on Chromatography (ISC) represents the oldest conference series focussing on separation science. ISC symposia have been organised since 1956 in each even year. ISC is internationally recognised as one of the premier meeting series for discussion of all modes of chromatography and separation science with a broad coverage of techniques and applications.

International Symposium on Chromatography - (ISC)

Phenomenex Strata CN Solid Phase Extraction (SPE)

Strata CN is a polar phase with slight hydrophobic selectivity in reversed phase mode and moderate polar selectivity in normal phase mode.

Normal Phase Solid Phase Extraction (SPE)A polar phase with slight hydrophobic selectivity in reversed phase mode and moderate polar selectivity in normal phase mode.<figure class="image"><img style="aspect-ratio:500/150;" src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Strata_cn_769c96c476.webp" alt="Phenomenex: Strata-CN" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Strata_cn_769c96c476.webp 245w," sizes="100vw" width="500" height="150"></figure><ul><li>Surface Area (m²/g): -</li><li>Separation Mode: Normal Phase</li><li>Particle Size: 55</li><li>Recommended Use: Extraction of polar compounds such as those that contain hydroxyl groups.</li></ul><h4>Starting Method</h4><ul><li>Condition: IPA/DCM</li><li>Equilibrate: Hexane</li><li>Load: Pretreated sample</li><li>Wash: 5 % DCM in Hexane</li><li>Elute: 1:1 Hexane / DCM or 1:1 Hexane / IPA</li></ul>Based on 100 mg/1 mL sorbent mass. The above is a convenient starting point for SPE method development, further optimization may be required to tailor the method for your specific extraction needs.

Phenomenex Strata Silica (Si-1) Solid Phase Extraction (SPE)

Strata Silica (Si-1) is a normal phase SPE sorbent with unbonded silica particle that offers strong polar selectivity.

Normal Phase Solid Phase Extraction (SPE)A polar phase with slight hydrophobic selectivity in reversed phase mode and moderate polar selectivity in normal phase mode.<figure class="image"><img style="aspect-ratio:500/150;" src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Strata_si_e4eb885006.webp" alt="Phenomenex: Strata-Silica (Si-1)" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Strata_si_e4eb885006.webp 245w," sizes="100vw" width="500" height="150"></figure><ul><li>Surface Area (m²/g): 550, m²/g, null m²/g, 490 m²/g</li><li>Separation Mode: Normal Phase</li><li>Pore Size: 70</li><li>Particle Size: 55</li><li>Recommended Use: Extraction of polar compounds that are similar in structure</li></ul><h4>Starting Method</h4><h5>Strata Normal Phase Method</h5><ul><li>Condition: IPA/DCM</li><li>Equilibrate: Hexane</li><li>Load: Pretreated sample</li><li>Wash: 5 % DCM in Hexane</li><li>Elute: 1:1 Hexane / DCM or 1:1 Hexane / IPA</li></ul>Based on 100 mg/1 mL sorbent mass. The above is a convenient starting point for SPE method development, further optimization may be required to tailor the method for your specific extraction needs.

Phenomenex Strata Melamine Solid Phase Extraction (SPE)

A proprietary phase that allows for the simultaneous extraction of melamine and cyanuric acid out of food and biological samples.

Specialty Solid Phase Extraction (SPE) SorbentA proprietary phase that allows for the simultaneous extraction of melamine and cyanuric acid out of food and biological samples.

Phenomenex Strata SCX Solid Phase Extraction (SPE)

A benzene sulfonic acid group is bonded to the surface of the silica particle, giving strong cation-exchange selectivity.

Ion-Exchange Solid Phase Extraction (SPE) SorbentA benzene sulfonic acid group is bonded to the surface of the silica particle, giving strong cation-exchange selectivity.<ul><li>Extraction of 1 °, 2 °, and 3 amines</li></ul><figure class="image"><img style="aspect-ratio:791/384;" src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Strata_SCX_SPE_f35df1035c.jpg" alt="Phenomenex: Strata SCX" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Strata_SCX_SPE_f35df1035c.jpg 245w," sizes="100vw" width="791" height="384"></figure><ul><li>Surface Area (m²/g): -</li><li>Separation Mode: Ion Exchange</li><li>Particle Size: 55</li><li>Recommended Use: Extraction of weakly basic compounds</li></ul><h4>Starting Method</h4><h5>Strata SCX – Strong Cation-Exchange</h5><ul><li>Condition: 1 mL Methanol</li><li>Equilibrate: 1 mL Acidified Water</li><li>Load: Pretreated sample (acidified)</li><li>Wash 1: 1 mL 0.1N HCl in Water</li><li>Wash 2: 1 mL 0.1N HCl in Methanol, dry under vacuum for 2-5 min</li><li>Elute: 1 mL 5 % NH4OH in Methanol</li></ul>Based on 100 mg/1 mL sorbent mass. The above is a convenient starting point for SPE method development, further optimization may be required to tailor the method for your specific extraction needs.

Phenomenex Strata NH2 Solid Phase Extraction (SPE)

This amino phase offers strong polar selectivity and hydrogen bonding under normal phase conditions or can be used as a weak anion-exchange sorbent.

Normal Phase Solid Phase Extraction (SPE)This amino phase offers strong polar selectivity and hydrogen bonding under normal phase conditions or can be used as a weak anion-exchange sorbent.<figure class="image"><img style="aspect-ratio:500/150;" src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Strata_nh2_a7c3599f55.webp" alt="Phenomenex: Strata-NH2" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Strata_nh2_a7c3599f55.webp 245w," sizes="100vw" width="500" height="150"></figure><ul><li>Surface Area (m²/g): -</li><li>Separation Mode: Normal Phase</li><li>Pore Size: 100</li><li>Particle Size: 25, 55</li><li>Recommended Use: Strong polar selectivity and hydrogen bonding under normal phase conditions or can be used as a weak anion-exchange sorbent</li></ul><h4>Starting Method</h4><h5>Strata NH2 – Weak Anion-Exchange</h5><ul><li>Condition: 1 mL Methanol</li><li>Equilibrate: 1 mL Water, pH 6-7</li><li>Load: Pretreated sample, pH 6-7</li><li>Wash 1: 1 mL 25mM Ammonium Acetate Buffer, pH 6-7</li><li>Wash 2: 1 mL Methanol, dry under vacuum for 2-5 min</li><li>Elute Any Acid: 1 mL 5% NH4OH in Methanol</li><li>Elute Weak Acids: 1 mL 5% Formic Acid in Methanol</li></ul>Based on 100 mg/1 mL sorbent mass. The above is a convenient starting point for SPE method development, further optimization may be required to tailor the method for your specific extraction needs.

Phenomenex Strata SAX Solid Phase Extraction (SPE)

The quaternary amine group on this sorbent remains positively charged under all conditions, giving a strong anion-exchange mechanism of retention.

Ion-Exchange Solid Phase Extraction Sorbent (SPE)The quaternary amine group on this sorbent remains positively charged under all conditions, giving a strong anion-exchange mechanism of retention.<figure class="image"><img style="aspect-ratio:500/150;" src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Strata_sax_470d923b27.webp" alt="Phenomenex: Strata-SAX" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Strata_sax_470d923b27.webp 245w," sizes="100vw" width="500" height="150"></figure><ul><li>Surface Area (m²/g): -</li><li>Separation Mode: Ion Exchange</li><li>Particle Size: 55</li><li>Recommended Use: Extraction of weakly acidic compounds</li></ul><h4>Starting Method</h4><h5>Strata SAX – Strong Anion-Exchange</h5><ul><li>Condition: 1 mL Methanol</li><li>Equilibrate: 1 mL DI Water</li><li>Load: Pretreated sample, pH 6-7</li><li>Wash 1: 1 mL 25mM Ammonium Acetate Buffer, pH 6-7</li><li>Wash 2: 1 mL Methanol, dry under vacuum for 2-5 min</li><li>Elute: 1 mL 5% Formic Acid in Methanol</li></ul>Based on 100 mg/1 mL sorbent mass. The above is a convenient starting point for SPE method development, further optimization may be required to tailor the method for your specific extraction needs.

Phenomenex Strata Screen-A Solid Phase Extraction (SPE)

Incorporates the hydrophobic selectivity of a C8 phase and strong anion-exchange for the extraction of acidic drugs from biological matrices.

Mixed-Mode Solid Phase Extraction (SPE) SorbentIncorporates the hydrophobic selectivity of a C8 phase and strong anion-exchange for the extraction of acidic drugs from biological matrices.<figure class="image"><img style="aspect-ratio:500/150;" src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Strata_Screen_A_f370bdfd48.webp" alt="Phenomenex: Strata Screen-A" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Strata_Screen_A_f370bdfd48.webp 245w," sizes="100vw" width="500" height="150"></figure><ul><li>Surface Area (m²/g): -</li><li>Separation Mode: Multi-Mode</li><li>Particle Size: 55</li><li>Recommended Use: Extracts acidic drugs from biological matrices</li></ul><h4>Starting Method</h4><h5>Strata Screen-A Strong Anion-Exchange</h5><ul><li>Condition: 1 mL Methanol</li><li>Equilibrate: 1 mL Water</li><li>Load: Pretreated sample</li><li>Wash 1: 1 mL 25mM Ammonium Acetate Buffer, pH 6-7</li><li>Wash 2: 1 mL Methanol, dry under vacuum for 2-5 min</li><li>Elute: 1 mL 5% Formic Acid in Methanol</li></ul>Based on 100 mg/1 mL sorbent mass. The above is a convenient starting point for SPE method development, further optimization may be required to tailor the method for your specific extraction needs.

Phenomenex Strata Screen-C Solid Phase Extraction (SPE)

Incorporates the hydrophobic selectivity of a C8 phase and strong cation exchange for the extraction of basic drugs from biological matrices.

Strong Cation-Exchange Solid Phase Extraction (SPE)Incorporates the hydrophobic selectivity of a C8 phase and strong cation exchange for the extraction of basic drugs from biological matrices.<figure class="image"><img style="aspect-ratio:500/150;" src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Strata_Screen_C_b60bb2b7e4.webp" alt="Phenomenex: Strata Screen-C" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Strata_Screen_C_b60bb2b7e4.webp 245w," sizes="100vw" width="500" height="150"></figure><ul><li>Surface Area (m²/g): 500, m²/g, 500 m²/g</li><li>Separation Mode: Multi-Mode</li><li>Pore Size: 70</li><li>Particle Size: 55</li><li>Recommended Use: Extraction of basic drugs from biological matrixes</li></ul><h4>Starting Method</h4><h5>Strata Screen-C Strong Cation-Exchange</h5><ul><li>Condition: 1 mL Methanol</li><li>Equilibrate: 1 mL Acidified Water</li><li>Load: Pretreated sample (acidified)</li><li>Wash 1: 1 mL 0.1N HCl in Water</li><li>Wash 2: 1 mL 0.1N HCl in Methanol, dry under vacuum for 2-5 min</li><li>Elute: 1 mL 5 % NH4OH in Methanol</li></ul>Based on 100 mg/1 mL sorbent mass. The above is a convenient starting point for SPE method development, further optimization may be required to tailor the method for your specific extraction needs.

Phenomenex Strata Screen-C GF Solid Phase Extraction (SPE)

Optimized for gravity flow, this sorbent offers hydrophobic selectivity from a C8 phase and strong cation-exchange properties for the extraction of basic drugs.

Strong Cation-Exchange Solid Phase Extraction (SPE)Optimized for gravity flow, this sorbent offers hydrophobic selectivity from a C8 phase and strong cation-exchange properties for the extraction of basic drugs from biological matrixes. Offers the selectivity of Screen-C in a gravity flow particle size for viscous samples.<h4>Starting Method</h4><h5>Strata Screen-C GF Strong Cation-Exchange</h5><ul><li>Condition: 1 mL Methanol</li><li>Equilibrate: 1 mL Acidified Water</li><li>Load: Pretreated sample (acidified)</li><li>Wash 1: 1 mL 0.1N HCl in Water</li><li>Wash 2: 1 mL 0.1N HCl in Methanol, dry under vacuum for 2-5 min</li><li>Elute: 1 mL 5 % NH4OH in Methanol</li></ul>Based on 100 mg/1 mL sorbent mass. The above is a convenient starting point for SPE method development, further optimization may be required to tailor the method for your specific extraction needs.

Phenomenex Zebron ZB-1HT Inferno GC Columns

Zebron Inferno column ZB-1HT provides true boiling point separation for hydrocarbon distillation methods.

<h4>Robust Results Up to 430 ºC</h4><ul><li>First non-metal columns stable to 430 °C</li><li>Provides true boiling point separation for hydrocarbon distillation methods</li><li>Longer lifetime with rugged high temperature, polyimide coated, fused silica tubing</li><li>Low activity, provides good peak shape for acidic and basic samples</li><li>Provides robust column performance for high temperature bake outs</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Zebron_zb_1ht_3c54563ddc.webp" alt="Phenomenex: Zebron-ZB-1HT" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Zebron_zb_1ht_3c54563ddc.webp 245w," sizes="100vw" width="500" height="150"><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Zebron_ZB_1_HT_Inferno_54cd995dba.jpg" alt="Phenomenex: Zebron™ ZB-1HT Inferno™" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Zebron_ZB_1_HT_Inferno_54cd995dba.jpg 173w," sizes="100vw" width="651" height="587"><h4>Recommended Use</h4>Rugged, high-temperature stability (up to 430 °C) for:<ul><li>non-polar compounds</li><li>for high boilers</li><li>contaminants</li><li>carry-overs</li><li>high-temp bakeouts</li></ul><h4>Recommended Applications</h4><ul><li>High Boiling Petroleum Products</li><li>Simulated Distillation Methods</li><li>Long-Chained Hydrocarbons</li><li>High Molecular Weight Waxes</li><li>Polymers/Plastics</li><li>Motor Oils</li><li>Diesel Fuel</li></ul><h5>Alternative To: Any 100 % Dimethylpolysiloxane Phase:</h5><ul><li>DB®-1ht</li><li>Rxi®-1HT</li><li>Petrocol 2887</li><li>CP-SimDist</li></ul><h3>Phenomenex Zebron Inferno GC Columns</h3><h4>Overcome Traditional Obstacles</h4><h5>Challenge # 1: Short Fused Silica Column Lifetimes</h5>Unlike Zebron™ Inferno™ GC columns, traditional fused silica columns are not equipped to handle prolonged exposure to temperatures above 360 °C. At high temperatures, fused silica GC columns:<ul><li>Become inflexible and brittle</li><li>Break easily and cause costly replacement</li><li>Require more system downtime for maintenance</li><li>Can’t separate high molecular weight compounds</li></ul><h5>Challenge # 2: Cumbersome Metal Column Tubing</h5>Though metal columns have higher temperature limits than capillary columns, they are more difficult to use.Most metal columns:<ul><li>Are inflexible and hard to use</li><li>Require special tubing cutters for installation</li><li>Are prone to leaks from expansion and contraction</li><li>Have active surfaces, giving poor peak shapes for acids and bases</li><li>Are incompatible with MS detectors</li></ul><h3>How it works</h3>Zebron™ Inferno™ columns offer enhanced performance where other columns fail. The two critical factors that allow for this are:<ul><li><h5>Advanced ESC™ Bonding Technology</h5></li></ul>At high temperature ranges, the stability of standard GC columns deteriorates, resulting in increased bleed. Zebron’s Engineered Self Cross-linking™ (ESC) bonding technology reinforces the stationary phase for enhanced column durability and extremely low bleed levels at high temperatures. The result: Inferno columns with the flexibility to perform for high temp oven ramps and bakeouts.<ul><li>High Temperature Polyimide Coating</li></ul>Standard polyimide resin pyrolyzes at temperatures above 360 °C, making the tubing unstable. Zebron Inferno columns use a temperature resistant polyimide resin that shows minimal thermal degradation, even at temperatures up to 430 °C*. This means longer column lifetime at elevated temperatures.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Zebron_Inferno_GC_Columns_How_it_works_d2d5658adc.jpg" alt="Phenomenex: Zebron Inferno GC Columns - How it works" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Zebron_Inferno_GC_Columns_How_it_works_d2d5658adc.jpg 245w," sizes="100vw" width="978" height="564"><h3>Features of Zebron Inferno GC Columns</h3><h4>Extremely Low Bleed for Rugged Performance</h4><ul><li>Longer column lifetime</li><li>Better reproducibility</li><li>Maximum sensitivity</li><li>More accurate quantitation</li></ul><h4>Increased Column Lifetime with Enhanced Durability</h4><ul><li>Less instrument downtime</li><li>More productivity</li><li>Lower laboratory costs</li></ul><h5>Standard GC Columns Cannot Withstand High Temperature</h5>After prolonged exposure to temperatures above 360 °C, most traditional GC columns become brittle and inflexible, often spontaneously breaking in the middle of a run. Work is stopped in order to change out the column and perform system maintenance. Unlike these fragile columns, ZebronTM InfernoTM columns have a thermally resistant polyimide coating for longer column lifetime at temperatures up to 430 °C. As a result, you get less instrument downtime, and higher productivity.<h4>Greater Performance for High Boiling Compounds</h4><ul><li>Better peak shape</li><li>Improved separation</li><li>More analytes detected</li></ul>Zebron™ Inferno™ columns have the inertness and temperature stability needed to separate high molecular weight compounds. These high boilers require a thermally rugged column with low bleed levels. Inferno columns provide optimal separation of these analytes.

Products from Phenomenex - page 4

Related content

ISC 2026 - Day 3

ISC 2026 - Day 2

Basic Principles of Gas Chromatography - Separation and Analysis