Marketplace products from category Spare parts from LabRulez - page 1

Agilent 410105004 is a motor-sensor assembly for the 6-port valve in the G1888 Headspace Sampler, combining a 24 VDC drive and position sensor.

Agilent G7004-20065 is Entrance Lens No. 1 for the EI High Efficiency Source used in selected 5977B/5977C GC/MSD and 7000/7010 GC/TQ systems.

Agilent G3170-60775 is an inert analyzer assembly for the 5975C GC/MSD with a 350 °C EI source, quadrupole mass analyzer, and Triple-Axis Detector platform.

Agilent G3488-60150 is an SCD/FID Tandem Burner for GC systems with the Agilent 8355 SCD, enabling simultaneous FID hydrocarbon detection and selective SCD sulfur detection.

Agilent G4590-67001 is a complete GC/MS transferline for the Intuvo 9000 GC, providing heated transfer of column effluent from the chromatographic flow path into the mass spectrometer.

Agilent G4590-67100 is a complete MS Tail Heater Assembly for Intuvo 9000 GC/MS. The package includes the G4590-60120 Install Kit and provides controlled heating around the MS tail during transfer to the MS.

Agilent G2581-69766 is a Spellman Medusa 766 High Voltage Power Supply Assembly for servicing the high-voltage electronics of compatible Agilent TOF/Q-TOF mass spectrometers.

Agilent G7250-67165 is an original Pulser Assembly for service and repair of the Agilent 7250A GC/Q-TOF mass spectrometer.

Agilent G3452-60552 is a 100 psi manifold assembly for the Split/Splitless inlet of Agilent 7890 GC systems. This original service part supports inlet pneumatic control and professional repair.

The Agilent G3870-60301 is a genuine brazed transfer line interface for selected Agilent GC/MS systems operating in electron ionization mode. It is a service replacement for the metallic GC-to-MS interface and is documented for systems including the 7000B/C/D Triple Quadrupole GC/MS and 7250 GC/Q-TOF.