Marketplace products from Agilent Technologies - page 5

Agilent 0100-1853 is a Vespel rotor seal for 2-position/6-port injection valves rated to 400 bar, compatible with autosamplers used in Agilent 1100 and 1120 LC systems.

Agilent G1329-87017 is a PEEK needle seat with a 0.17 mm ID capillary for G1313A, G1329A, and G1329B autosamplers. Compatible with G1313-87201 needle assembly and 1100/1200 LC systems.

Agilent 5062-8517 is a PTFE frit adapter for 1/8" OD (3.2 mm) tubing, designed for LC applications with the 5041-2168 20 µm solvent bottle inlet filter. Supplied as 4/pk.

Agilent 01018-22707 is a PTFE frit for analytical LC pump purge valves, compatible with Agilent 1100, 1200, 1260 Infinity II & III, and 1290 Infinity II & III LC systems. Supplied as 5/pk.

Agilent Solvent Bottle Inlet Filter (5041-2168), 20 µm glass, prevents particulates from entering HPLC/UHPLC systems, protecting pumps, valves, and columns.

Agilent G7802A is a GPC/SEC viscometer for sensitive intrinsic-viscosity measurements of polymer solutions. Its four-capillary differential bridge operates from 30–60 °C and supports Universal Calibration.

The Agilent G1314-60100 is a long-life deuterium VWD lamp for G1314A/B/C detectors and Agilent 1120 and 1220 Infinity LC systems. It is a genuine replacement UV source for routine LC detector maintenance and service.

The Agilent InfinityLab Poroshell 120 EC-C8 (693775-906T) is a 2.1 × 150 mm HPLC/UHPLC column with 2.7 µm superficially porous particles and a 600 bar pressure rating. Its EC-C8 phase provides lower retention than C18, broad application flexibility, and stable operation across a pH range of 2–8.

The Agilent Altura Poroshell HILIC-Z is a 2.1 × 150 mm HILIC column with 2.7 µm superficially porous particles and Ultra Inert stainless-steel hardware. Its zwitterionic HILIC-Z phase provides alternative selectivity and broad pH stability from 2–12 for LC and LC/MS analysis of amino acids and other polar analytes.

The Agilent Altura ZORBAX Eclipse Plus C18 (204210-308) is a 2.1 × 100 mm UHPLC column with 1.8 µm fully porous particles and Ultra Inert stainless-steel hardware. Rated to 1,200 bar and covering a pH range of 2–9, it is designed for fast, high-efficiency LC and LC/MS separations.