Marketplace products focused on HPLC from LabRulez - page 1

This Agilent 1260 Infinity configuration provides an integrated HPLC workflow from four-solvent gradient formation and temperature-controlled sample injection to precise column thermostating and high-speed diode-array detection. It is particularly well suited to automated QA/QC and development methods requiring reproducible sample, separation, and UV/Vis detection conditions.

This Agilent 1260 Infinity HPLC configuration combines quaternary solvent delivery, automated temperature-controlled sample handling, precise column thermostating, and fast diode-array detection in one modular system. With up to 600 bar pump pressure and 190–640 nm spectral acquisition, it provides a versatile platform for routine analytical HPLC.

The Waters ACQUITY I-Class Binary Solvent Manager is optimized for rapid-gradient UPLC where low delay and precise solvent delivery are critical. Four-solvent selection, automated priming, active seal washing, and high-pressure binary mixing provide a flexible platform for demanding LC and LC/MS workflows.

The Waters ACQUITY UPLC I-Class Binary Solvent Manager is a high-pressure binary solvent-delivery module operating up to 2.0 mL/min and 18,000 psi. Precise high-pressure mixing, integrated degassing, and automatic compressibility compensation make it well suited for fast and highly reproducible UPLC and LC/MS workflows.

The Waters ACQUITY UPLC M-Class configured with μBSM, μSM-FL, Auxiliary Solvent Manager, and Trap Valve Manager is a complete low-flow LC platform covering 200 nL/min to 100 µL/min at pressures up to 15,000 psi.

The Agilent G1367C is a fully integrated 600 bar autosampler for the 1200 Series platform, combining robotic sample handling, active needle washing, and flexible vial or plate operation. Continued software support and available service components also make it well suited for extending the useful life of existing Agilent LC systems.

The Agilent G1367C is a fully integrated 600 bar autosampler for the 1200 Series platform, combining robotic sample handling, active needle washing, and flexible vial or plate operation. Continued software support and available service components also make it well suited for extending the useful life of existing Agilent LC systems.

The Agilent G1367C is particularly useful for laboratories that routinely switch between vials, tubes, and well plates while requiring long unattended sequences. Capacity for up to two 384-well plates combines high sample throughput with 600 bar LC operation.

The Agilent G1367C is particularly useful for laboratories that routinely switch between vials, tubes, and well plates while requiring long unattended sequences. Capacity for up to two 384-well plates combines high sample throughput with 600 bar LC operation.

The Agilent G1367C combines 600 bar capability with a continuously flushed sample path and active needle washing. It is a strong choice for precise HPLC and LC/MS injection workflows where low carryover and consistent sample handling are critical.