<p><strong>Per- and polyfluoroalkyl substances (PFAS) have earned the moniker "forever chemicals" due to their extreme persistence in the environment. Their detection is crucial for protecting public health and the environment as these synthetic compounds continue to pose significant challenges worldwide. This comprehensive exploration examines why PFAS detection matters, current detection methods, and future directions in addressing PFAS contamination.</strong></p><h3><strong>Understanding PFAS and Their Health Impacts</strong></h3><p>PFAS are a class of synthetic organic compounds with diverse structures, properties, and uses. Despite their diversity, all PFAS contain perfluoroalkyl moieties that are extremely resistant to environmental and metabolic degradation [1]. This high persistence is a defining characteristic that makes PFAS management particularly challenging.</p><h3><strong>Documented Health Effects</strong></h3><p>Current scientific research has linked PFAS exposure to numerous adverse health outcomes:</p><ul><li>Reproductive effects including decreased fertility and increased high blood pressure in pregnant women [8]</li><li>Developmental effects in children such as low birth weight, accelerated puberty, and behavioral changes [8]</li><li>Reduced immune system function, including decreased vaccine response</li><li>Interference with natural hormones and endocrine disruption</li><li>Increased cholesterol levels and obesity risk</li><li>Increased risk of several cancers, including prostate, kidney, testicular, oral cavity/pharynx, brain, and endocrine cancers [3]</li></ul><p>A 2023 study linked PFAS-contaminated water with up to a <strong>33% increase in cancer incidence</strong> in affected areas [3]. The study compared regions with elevated PFAS levels to cancer data from the National Cancer Institute, finding higher incidences of various cancers after controlling for factors like smoking and obesity.</p><h3><strong>Environmental Persistence and Contamination</strong></h3><p>The extreme persistence of PFAS represents a fundamental concern for environmental management. PFAS are considered the most environmentally persistent substances among organic chemicals [7]. This persistence means that even if all PFAS uses were immediately phased out, existing contamination would continue to affect ecosystems and water supplies for generations.</p><p>A 2023 study at a military fire training site estimated that PFAS contamination will persist for centuries without remediation [7]. The research found that terminal PFAS still exceed regulatory limits by 2000-fold decades after aqueous film-forming foam (AFFF) use ceased, with precursors accounting for around half of the extractable organofluorine across years.</p><h3><strong>Current Detection Methods</strong></h3><h4><strong>EPA Standardized Methods</strong></h4><p>The<strong> Environmental Protection Agency (EPA</strong>) has developed several standardized methods for PFAS detection, each with specific applications and capabilities:</p><h5><strong>EPA Method 533</strong></h5><p><a target="_blank" rel="noopener noreferrer" href="https://blog.organomation.com/blog/epa-533-drying-down-pfas-samples-after-spe"><strong>EPA Method 533</strong></a> focuses on "short chain" PFAS with carbon chain lengths of<strong> C4 to C12</strong>. Released in December 2019, this method complements Method 537.1 and includes several key features:</p><ul><li>Uses isotope dilution quantification approach with extracted internal standards, which reduces overall analytical uncertainty</li><li>Employs weak anion exchange solid phase extraction cartridges as opposed to polystyrene divinylbenzene used in 537.1</li><li>Can analyze 25 PFAS compounds, including additional short-chain PFAS that were not apart of Method 537.1</li><li>Allows for longer holding times: 28 days to extraction and 28 days to analyze (compared to 14 days to extraction in Method 537.1)</li><li>Uses ammonium acetate as a preservative (versus Trisma in Method 537.1) [1]</li></ul><h5><strong>EPA Method 537/537.1</strong></h5><p><a target="_blank" rel="noopener noreferrer" href="https://blog.organomation.com/blog/sample-concentration-epa-method-537-pfas-determination"><strong>EPA Method 537 </strong></a>was first published in 2009 for the determination of 14 PFAS in drinking water [6]. It was later updated to Method 537.1 in 2018 (with editorial updates in 2020) to expand its capabilities:</p><ul><li>Uses<a target="_blank" rel="noopener noreferrer" href="https://www.organomation.com/what-is-solid-phase-extraction-spe"><strong> solid phase extraction (SPE) </strong></a>and<a target="_blank" rel="noopener noreferrer" href="https://www.organomation.com/preparing-samples-for-lc-ms/ms-analysis"><strong> liquid chromatography/tandem mass spectrometry (LC-MS/MS)</strong></a></li><li>Method 537.1 expanded detection to 18 PFAS compounds, including HFPO-DA (one component of GenX technology)</li><li>Utilizes styrene-divinylbenzene (SDVB) media for extraction</li><li>Requires samples to be extracted within 14 days and analyzed within 28 days</li><li>Methanol is used to elute the extracts. This should then be reconstituted with a 96:4 methanol:water mixture [1]</li></ul><p>Together, Methods 533 and 537.1 can detect a total of <strong>29 unique PFAS compounds in drinking water </strong>and are approved for monitoring under the fifth Unregulated Contaminant Monitoring Rule (UCMR 5) and the PFAS National Primary Drinking Water Regulation [1] [3].</p><h5><strong>EPA Method 1633</strong></h5><p><a target="_blank" rel="noopener noreferrer" href="https://blog.organomation.com/blog/preparing-diverse-sample-matrices-for-epa-method-1633"><strong>EPA Method 1633</strong></a>, released in 2024, represents a significant advancement in PFAS analysis:</p><ul><li>Developed for the analysis of <strong>40 PFAS compounds </strong>in various matrices, including surface water, groundwater, wastewater, soil, biosolids, sediment, landfill leachate, and fish tissue</li><li>Expands beyond the drinking water focus of Methods 533 and 537.1</li><li>Provides a standardized approach that may replace modified drinking water methods (i.e., modified EPA 537) that were previously used for non-drinking water matrices [1]</li></ul><h4><strong>Conventional Analytical Techniques</strong></h4><p>The gold standard for PFAS analysis involves chromatographic techniques coupled with mass spectrometry:</p><ul><li>Liquid Chromatography-Tandem Mass Spectrometry (LC-MS/MS) is the most widely used method for PFAS analysis, offering high sensitivity and specificity [1]</li><li>High-Resolution Mass Spectrometry (HRMS) allows for rapid detection and identification of PFAS species at very low concentrations [5]</li></ul><p>These techniques can detect PFAS at parts per trillion (ppt) levels, which is essential given the low concentrations at which PFAS can cause health effects [1]. However, these methods require sophisticated equipment, specialized training, and significant financial resources, making them inaccessible in many regions, particularly in developing countries.</p><h4><strong>Emerging Detection Technologies</strong></h4><p>Several innovative approaches are being developed to address the limitations of conventional methods:</p><ul><li>Electrochemical biosensors using modified electrodes have shown promise for selective PFAS detection with low detection limits [2]</li><li>Surface-Enhanced Raman Spectroscopy (SERS) uses metallic nanoparticles and can be made into a portable method for on-site testing [1]</li><li>Molecular imprinted polymers (MIPs) offer thermal and physical stability, reusability, and low-cost synthesis for PFAS detection [6]</li></ul><p>These emerging technologies aim to provide more accessible, field-deployable, and cost-effective alternatives to traditional laboratory-based methods.</p><h3><strong>Challenges in PFAS Detection</strong></h3><h4><strong>Analytical Challenges</strong></h4><p>Detecting PFAS presents several technical challenges:</p><ul><li>The ubiquity of PFAS in laboratory equipment and accessories can lead to background contamination when measuring at parts-per-trillion levels [1]</li><li>Many components in liquid chromatographs, mass spectrometers, and solid-phase extraction systems contain materials that can leach PFAS compounds [9]</li><li>The vast number of PFAS (thousands of compounds) makes comprehensive detection difficult, as analytical standards are only available for a small subset [1]</li><li>Complex matrices like food and environmental samples require sophisticated sample preparation techniques</li></ul><h4><strong>Global Disparities in Detection Capabilities</strong></h4><p>Access to PFAS detection technology varies significantly worldwide:</p><ul><li>Many developing regions, particularly in Africa, lack adequately equipped laboratories with the necessary instrumentation to detect and measure PFAS</li><li>There is often a scarcity of qualified professionals with experience in PFAS analysis in these regions</li><li>The high cost of acquiring and maintaining sophisticated analytical instruments presents a substantial obstacle to conducting extensive PFAS investigations in resource-limited settings [1]</li><li>Competing priorities such as infectious diseases, poverty, and food security often divert attention and resources from environmental pollutants like PFAS</li></ul><h4><strong>Regulatory Landscape and Compliance</strong></h4><p>The regulatory framework for PFAS is evolving rapidly worldwide:</p><ul><li>The EPA finalized Section 8(a)(7) of the Toxic Substances Control Act in September 2024, requiring manufacturers and importers to report on their use of PFAS since 2011 [10]</li><li>Electronic reporting for PFAS will open on July 11, 2025, with final reporting deadlines in 2026</li><li>Companies must report detailed information including chemical identity, production volumes, industrial and consumer products, worker exposure, and disposal methods [10]</li></ul><p>These regulations are driving demand for more effective and accessible PFAS detection methods to ensure compliance and protect public health.</p><h3><strong>Future Directions in PFAS Detection</strong></h3><h4><strong>Technological Advancements</strong></h4><p>The future of PFAS detection lies in developing more accessible, sensitive, and comprehensive methods:</p><ul><li>Non-targeted screening methods that can identify unknown PFAS compounds without requiring analytical standards for each specific compound</li><li>Total fluorine analysis techniques like Adsorbable Organic Fluorine and Total Oxidizable Precursor Assay that can quantify the presence of fluorine atoms within a sample [1]</li><li>Portable sensors and field-deployable technologies that enable on-site monitoring and rapid response to contamination events</li><li>AI-driven solutions that can improve data analysis and interpretation for complex PFAS mixtures</li></ul><h4><strong>Collaborative Approaches</strong></h4><p>Addressing the global challenge of PFAS detection requires coordinated efforts:</p><ul><li>International partnerships between researchers in developed and developing regions to enhance expertise and capacity building</li><li>Standardization of analytical methods to ensure consistency and comparability of results across different laboratories and regions</li><li>Open data sharing and collaboration across countries to leverage collective knowledge and resources</li><li>Integration of PFAS monitoring into broader environmental and public health surveillance systems</li></ul><h3><strong>Conclusion</strong></h3><p>The detection of PFAS is not merely a technical challenge but a critical public health and environmental imperative [1]. As these "forever chemicals" continue to persist in our environment, developing effective, accessible, and comprehensive detection methods becomes increasingly important. By advancing detection technologies, strengthening regulatory frameworks, and fostering global collaboration, we can better understand, monitor, and ultimately mitigate the impacts of PFAS contamination.</p><p>The EPA's standardized methods (533, 537.1, and 1633) provide crucial tools for monitoring PFAS in various environmental matrices, but continued innovation is needed to address the full spectrum of PFAS compounds and to make detection more accessible globally [1] [6]. The path forward requires sustained investment in research and development, capacity building in resource-limited settings, and a commitment to environmental justice that ensures all communities have access to the tools and information needed to protect themselves from PFAS exposure. Only through such comprehensive approaches can we hope to address the complex challenges posed by these persistent pollutants.</p><p><span>Be sure to check out our other installments of our&nbsp;</span><a target="_blank" rel="noopener noreferrer" href="https://blog.organomation.com/blog/introducing-our-environmental-contaminants-series-making-sense-of-the-alphabet-soup"><span>Environmental Contaminant Series</span></a><span>&nbsp;covering&nbsp;</span><a target="_blank" rel="noopener noreferrer" href="https://blog.organomation.com/blog/the-importance-of-detecting-persistent-organic-pollutants-pops"><span>Persistent Organic Pollutants (POPs)</span></a><span>,&nbsp;</span><a target="_blank" rel="noopener noreferrer" href="https://blog.organomation.com/blog/the-importance-of-detecting-polycyclic-aromatic-hydrocarbons-pahs"><span>Polycyclic Aromatic Hydrocarbons (PAHs)</span></a><span>,&nbsp;</span><a target="_blank" rel="noopener noreferrer" href="https://blog.organomation.com/blog/the-importance-of-detecting-semi-volatile-organic-compounds-svocs"><span>Semi-Volatile Organic Compounds (SVOCs)</span></a><span>, and </span><a target="_blank" rel="noopener noreferrer" href="https://blog.organomation.com/blog/the-importance-of-detecting-polychlorinated-biphenyls-pcbs"><span>Polychlorinated Biphenyls (PCBs)</span></a><span>.</span></p>

The Importance of Detecting Per- and Polyfluoroalkyl Substances (PFAS)

<p><strong>Scientists at CEITEC Brno University of Technology have developed microscopic robots that could one day accelerate beer production and simplify food quality control. The magnetically controlled biobots can actively mix liquids during fermentation, speed up the process, and separate themselves from the finished product once fermentation is complete. The results of the research, carried out by Professor Martin Pumera’s team, were published in the journal </strong><i><strong>ACS Nano</strong></i><strong>.</strong></p><p><i>“When people hear the word ‘robot’ today, they often imagine an electronic device. In reality, however, a robot can be any system capable of autonomously performing a specific task,” </i>explains <strong>Martin Pumera of CEITEC Brno University of Technology</strong>.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/CEITEC_Mikroroboti_z_CEITEC_mohou_urychlit_vyrobu_piva_i_kontrolu_kvality_potravin_7d9ff82875.jpeg" alt="CEITEC BUT/Jakub Rozboud: CEITEC Microrobots Could Speed Up Beer Production and Food Quality Control: Martin Pumera in his lab at CEITEC BUT." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_CEITEC_Mikroroboti_z_CEITEC_mohou_urychlit_vyrobu_piva_i_kontrolu_kvality_potravin_7d9ff82875.jpeg 235w," sizes="100vw" width="1600" height="1067"></p><p>The research team created so-called biobots—biohybrid microrobotic capsules containing brewer’s yeast and magnetic nanoparticles. When the yeast produces carbon dioxide during fermentation, the resulting bubbles cause the biobots to move up and down through the liquid. This naturally mixes the contents of the vessel and makes fermentation more efficient. Compared with conventional static particles, the biobots can therefore accelerate chemical processes that are important in food production.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/CEITEC_Mikroroboti_z_CEITEC_mohou_urychlit_vyrobu_piva_i_kontrolu_kvality_potravin_4_af5fd4611f.jpg" alt="CEITEC BUT/Martin Pumera's archive: CEITEC Microrobots Could Speed Up Beer Production and Food Quality Control: Hematite microrobot (image for illustrative purposes)." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_CEITEC_Mikroroboti_z_CEITEC_mohou_urychlit_vyrobu_piva_i_kontrolu_kvality_potravin_4_af5fd4611f.jpg 209w," sizes="100vw" width="1600" height="1192"></p><p>Another major advantage of the technology is that the biobots can be easily separated from the finished beverage. Thanks to the magnetic particles they contain, they can be controlled with a magnetic field and removed once fermentation is complete, eliminating the need for additional filtration. The researchers also demonstrated that the biobots can be reused over several production cycles.</p><p><i>“Unlike conventional static particles, microrobots actively move throughout the entire volume of the liquid, allowing them to cover a larger area and make the whole process more efficient. At the same time, they also facilitate the automation of production,”</i> adds Martin Pumera. The team is currently discussing potential applications of the technology with a major European brewery.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/CEITEC_Mikroroboti_z_CEITEC_mohou_urychlit_vyrobu_piva_i_kontrolu_kvality_potravin_3_e8e5a3a55a.jpg" alt="CEITEC BUT/Martin Pumera's archive: CEITEC Microrobots Could Speed Up Beer Production and Food Quality Control: g-C₃N₄ microrobots (image for illustrative purposes)." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_CEITEC_Mikroroboti_z_CEITEC_mohou_urychlit_vyrobu_piva_i_kontrolu_kvality_potravin_3_e8e5a3a55a.jpg 158w," sizes="100vw" width="1476" height="1460"></p><p>Martin Pumera’s group has long been exploring the use of microrobots and advanced materials in the food industry. In the past, for example, the team developed a flexible sensor for smart packaging capable of detecting spoiled fish. The new biobots therefore represent another step towards more advanced methods of food quality and safety control.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/CEITEC_Mikroroboti_z_CEITEC_mohou_urychlit_vyrobu_piva_i_kontrolu_kvality_potravin_2_75c7fed958.jpeg" alt="CEITEC BUT/ACS Nano: CEITEC Microrobots Could Speed Up Beer Production and Food Quality Control: ACS Nano - cover featuring article by Martin Pumera et al." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_CEITEC_Mikroroboti_z_CEITEC_mohou_urychlit_vyrobu_piva_i_kontrolu_kvality_potravin_2_75c7fed958.jpeg 117w," sizes="100vw" width="1600" height="2128"></p>

 CEITEC Microrobots Could Speed Up Beer Production and Food Quality Control 

<p><strong>In this episode of ‪ChromatographyTalk‬, ‪Organomation‬ General Manager David Oliva sits down with Michelle Taylor, Editor-in-Chief of LabCompare, to go behind the scenes of their groundbreaking two-part documentary series on PFAS (per- and polyfluoroalkyl substances).</strong></p><p>The conversation kicks off with a startling revelation: many of the world’s leading PFAS experts have completely stopped eating seafood due to high contamination levels discovered during testing. From there, we dive deep into the technical and regulatory challenges facing today's analytical laboratories.</p><h4><strong>In this episode, we discuss:</strong></h4><ul><li><strong>The Laboratory Throughput Crisis:</strong> Why labs are currently "overwhelmed with samples" and how tiered testing—using single quad instruments for screening before moving to triple quads—is helping to manage capacity without sacrificing sensitivity.</li><li><strong>The Battle Against Background Contamination:</strong> Why PTFE-free (PFAS-free) laboratory equipment is no longer optional when trying to detect "forever chemicals" at the parts-per-trillion and parts-per-quadrillion levels.</li><li><strong>Complex Matrices (Seafood &amp; Packaging): </strong>The technical hurdles of analyzing high-lipid samples like fish and the rising demand for migration testing as states like Rhode Island begin to phase out PFAS in food packaging.</li><li><strong>Global Regulatory Shifts:</strong> A look at the "dual compliance model" required for labs supporting international exporters, especially with the European Union’s stricter enforcement compared to the U.S. monitoring approach.</li><li><strong>The "Grand Challenge" of Unknowns: </strong>How EPA Method 1621 (Total Organic Fluorine) is helping labs close the mass balance gap and why the next generation of bench chemists must embrace *AI and data science* to manage the massive datasets generated by high-resolution mass spectrometry.</li><li><strong>PFAS Destruction vs. Remediation:</strong> &nbsp;The promising (and problematic) methods for breaking the carbon-fluorine bond, and why incineration may inadvertently be spreading shorter-chain PFAS into the air.</li></ul><p>Whether you are a lab manager looking to future-proof your workflow or a chemist navigating the ever-evolving landscape of EPA Method 1633, this episode provides essential insights into the most pressing environmental crisis of our time.</p><h3><strong>Video Transcription</strong></h3><h4><strong>Michelle Taylor: PFAS Testing Is Becoming a Much Bigger Analytical Challenge</strong></h4><p><strong>PFAS analysis has rapidly evolved from a specialized environmental testing problem into a much broader challenge involving drinking water, food, packaging, laboratory contamination, international regulation, data analysis, and even destruction technologies. In an interview with Michelle Taylor, Editor-in-Chief of Labcompare, the discussion explored what laboratories are learning from the latest PFAS research—and why the analytical demands are likely to continue growing.</strong></p><p>Taylor leads editorial content for <strong>Labcompare</strong>, an online resource covering analytical laboratory instrumentation, products, and scientific developments. Among the projects she considers particularly important are two long-form documentaries produced by Labcompare examining per- and polyfluoroalkyl substances (PFAS), first through drinking water and subsequently through food.</p><p>The documentaries brought together subject-matter experts working across PFAS analysis and exposed some of the practical realities laboratories now face: rapidly changing regulations, extremely low detection limits, complex matrices, contamination risks, and sample volumes that can overwhelm laboratory capacity.</p><h4><strong>From drinking water to seafood</strong></h4><p>One of the most memorable findings for Taylor came during production of the second documentary, which focused on PFAS in food.</p><p>Several experts interviewed for the project told her they had stopped eating seafood, in some cases many years earlier, because of concerns surrounding contamination. For Taylor, the consistency and immediacy of those responses illustrated how closely analytical research can intersect with everyday decisions.</p><p>Seafood also demonstrates why PFAS testing can become analytically difficult.</p><p>Fish and other high-lipid samples require effective extraction to release the analytes, followed by rigorous cleanup to remove fats. According to the experts Taylor interviewed, the cleanup step is particularly critical because residual lipids can damage LC columns and create severe matrix interferences.</p><p>Laboratories are therefore using approaches such as enhanced matrix removal and carbon- or silica-based sorbents to reduce the lipid content of extracts before instrumental analysis. The goal is not simply obtaining sufficient recovery, but producing an extract clean enough to maintain analytical performance and laboratory throughput.</p><h4><strong>How laboratories are handling the PFAS sample burden</strong></h4><p>The analytical sensitivity now required for PFAS testing presents another challenge: laboratories may need to measure compounds at <strong>parts-per-trillion levels</strong> while processing growing numbers of samples.</p><p>Automation has therefore become increasingly important, particularly during sample preparation, where repetitive manual procedures can otherwise create a major bottleneck.</p><p>Taylor also described a <strong>tiered analytical strategy</strong> being used by some laboratories. A less demanding measurement can first be used for screening, while samples generating a positive result are subsequently transferred to a more sensitive platform, such as triple-quadrupole mass spectrometry, for confirmation and quantitation.</p><p>This type of workflow can help laboratories concentrate their highest-performance instrumentation on the samples that actually require it rather than applying the most intensive analysis to every incoming sample.</p><p>The broader principle is likely to become increasingly important as PFAS testing expands: laboratories must find ways to increase throughput without sacrificing the sensitivity demanded by regulatory methods.</p><h4><strong>When the laboratory itself becomes a source of PFAS</strong></h4><p>At trace concentrations, contamination introduced during sample preparation or measurement can become comparable to the concentration being determined.</p><p>This makes the materials used throughout the analytical workflow particularly important.</p><p>Taylor emphasized that PFAS laboratories must maintain continuous awareness of potential contamination from <strong>solvents, water, tubing, containers, and other laboratory components</strong>. Equipment containing fluoropolymers such as PTFE may be problematic in certain PFAS workflows because background contamination can contribute to false positives or elevated blanks.</p><p>As detection limits move lower, dedicated PFAS-compatible or fluoropolymer-free laboratory equipment becomes increasingly valuable.</p><p>Taylor described manufacturers offering clearly identified PFAS-free configurations as an important response to this problem. Rather than forcing laboratories to investigate the material composition of each component individually, dedicated configurations can simplify method implementation and reduce uncertainty about potential background sources.</p><p>For laboratories already dealing with demanding workflows and large sample loads, eliminating potential contamination before it occurs can save considerable troubleshooting time.</p><h4><strong>Food packaging could drive the next major wave of testing</strong></h4><p>PFAS concerns are not limited to the food itself.</p><p>The interview also examined <strong>food-contact materials</strong>, including takeout containers and other packaging from which PFAS may migrate into food. State-level restrictions in the United States are already beginning to affect the materials manufacturers can use.</p><p>For contract laboratories, this creates the possibility of another significant increase in demand for compliance and migration testing.</p><p>Taylor’s recommendation is straightforward: laboratories should follow proposed regulations before they become final.</p><p>Waiting until a new requirement takes effect can leave a laboratory simultaneously trying to acquire instrumentation, establish methods, train staff, and respond to customer demand. Monitoring regulatory agencies, scientific meetings, and industry discussions earlier gives laboratories time to prepare analytical capabilities before the testing requirement becomes urgent.</p><p>She expects PFAS restrictions in food packaging to continue developing first through a patchwork of individual state regulations. Once a sufficient number of states adopt restrictions, however, the economics may increasingly encourage suppliers to move toward PFAS-free materials regardless of whether every jurisdiction requires them.</p><p>A national standard could eventually follow that transition.</p><h4><strong>One sample, two regulatory environments</strong></h4><p>International food exporters face another complication: <strong>PFAS requirements are not necessarily the same between the United States and European Union</strong>.</p><p>Taylor noted that laboratories serving both markets may effectively need to operate under a dual-compliance model.</p><p>In the interview, she highlighted EU requirements targeting specific PFAS—including <strong>PFOS, PFOA, PFNA, and PFHxS</strong>—at very low concentrations in certain foods, while the U.S. approach has historically involved a different combination of monitoring programs, evolving compound lists, and import-related requirements.</p><p>For laboratories supporting international customers, this means more than simply selecting a different reporting limit.</p><p>Different markets may require different target lists, methods, documentation, auditing, and compliance procedures. Laboratories therefore need analytical platforms capable of ultratrace measurements while also maintaining the operational flexibility to support multiple regulatory frameworks.</p><p>That additional complexity also carries a practical cost: performing different protocols for different jurisdictions means more staff time, additional workflow management, and potentially greater instrument demand.</p><h4><strong>Total fluorine screening can help laboratories decide what to analyze next</strong></h4><p>Targeted LC-MS/MS methods are highly sensitive, but they only measure compounds included in the analytical panel.</p><p>This creates an important question: <strong>what about fluorinated substances that are present but are not included in the targeted method?</strong></p><p>The interview discussed <strong>EPA Method 1621</strong>, which uses a broader fluorine-based screening approach. Taylor described this type of measurement as useful for helping laboratories assess the gap between compounds captured by targeted LC-MS/MS methods and the broader amount of organofluorine present in a sample.</p><p>Such screening can also become part of a tiered workflow.</p><p>For applications such as food packaging, laboratories could initially use a broader fluorine measurement to determine whether a sample warrants further investigation. Positive or suspicious samples could then move to more selective and sensitive targeted analysis for identification and quantitation.</p><p>Non-targeted high-resolution mass spectrometry can add another layer by revealing compounds outside conventional target lists.</p><p>Together, these approaches create a funnel from broad screening toward increasingly detailed characterization rather than attempting the most comprehensive analysis on every sample from the outset.</p><h4><strong>PFAS analysis is becoming a data problem too</strong></h4><p>High-resolution mass spectrometry can generate enormous datasets containing signals from large numbers of known and unknown compounds.</p><p>As a result, Taylor believes the role of the analytical chemist is changing.</p><p>Strong laboratory skills remain essential, but scientists increasingly need <strong>data literacy</strong> as well. Understanding complex datasets, working with advanced software, and interacting effectively with artificial intelligence and machine-learning tools are becoming important parts of modern analytical work.</p><p>Taylor does not see this change primarily as replacing scientific expertise.</p><p>Instead, she compares it with earlier laboratory automation: repetitive or technically demanding tasks can increasingly be handled by software, allowing scientists to spend more time interpreting results and making decisions.</p><p>AI may also make sophisticated analytical information more accessible. A less experienced mass spectrometry user could potentially receive explanations of complex data through software capable of presenting results in natural language, reducing dependence on a single specialist being immediately available.</p><p>There is another potential advantage beyond speed.</p><p>Machine-learning systems can recognize patterns across large datasets that may be difficult or impossible for an individual scientist to detect manually. As analytical datasets become larger and multidimensional, that pattern-recognition capability could become increasingly valuable.</p><h4><strong>Finding PFAS is only the first half of the problem</strong></h4><p>For years, much of the PFAS discussion has focused on answering two questions:</p><ul><li><strong>Are PFAS present, and how much is there?</strong></li></ul><p>The next challenge is considerably harder: <strong>how do we actually remove or destroy them?</strong></p><p>Taylor described this as an expanding research field that will increasingly involve analytical laboratories.</p><p>The strength of the carbon-fluorine bond makes PFAS destruction difficult. Some treatment approaches seek to break this bond and achieve complete defluorination, but incomplete destruction can create another analytical problem.</p><p>For example, thermal treatment may transform longer-chain PFAS into shorter-chain fluorinated compounds rather than eliminating them completely. Those products may then enter another environmental compartment, including atmospheric emissions.</p><p>Consequently, laboratories studying PFAS destruction must do more than measure disappearance of the original compound. They also need to determine whether <strong>fluorinated transformation products or other byproducts remain</strong>.</p><p>Analytical chemistry therefore has two roles: monitoring PFAS contamination and demonstrating whether remediation technologies truly destroy the substances they are intended to remove.</p><h4><strong>The PFAS problem is expanding beyond water and food</strong></h4><p>The first two Labcompare documentaries focused primarily on <strong>water and food</strong>, two matrices already receiving substantial regulatory and public attention.</p><p>But Taylor does not expect the story to end there.</p><p>If Labcompare produces another PFAS documentary, she sees <strong>PFAS in air</strong> as a likely subject. Discussions with experts during earlier filming repeatedly raised atmospheric contamination, including both direct environmental occurrence and emissions potentially associated with treatment or destruction processes.</p><p>The progression illustrates how quickly the PFAS field is expanding.</p><p>Drinking water regulation accelerated analytical development. Food testing introduced more difficult matrices and new exposure pathways. Packaging is creating another compliance challenge. Environmental remediation raises questions about destruction products. Atmospheric monitoring could become another significant frontier.</p><p>For laboratories already working with chromatography and mass spectrometry, Taylor’s message is essentially to be prepared—even organizations that do not currently consider themselves “PFAS laboratories” may eventually become involved.</p><h4><strong>An analytical field that is still changing rapidly</strong></h4><p>Perhaps the strongest theme running through the interview is that PFAS analysis has no fixed endpoint yet.</p><p>Methods continue to evolve. Regulations change. Target compound lists expand. Instrument sensitivity improves. Laboratories discover new sources of background contamination, while researchers identify additional exposure pathways and investigate new destruction technologies.</p><p>Taylor compares the situation to earlier periods of rapid analytical development, such as the evolution of forensic DNA analysis: each technological advance reveals more information, which in turn creates new questions and new analytical requirements.</p><p>That makes preparation particularly important.</p><p>Laboratories cannot predict every future regulation, but they can follow proposed requirements, develop flexible workflows, invest in contamination control and data capabilities, and understand how their existing chromatography and mass spectrometry expertise could be applied to emerging PFAS challenges.</p><p>The analytical problem is no longer simply detecting a group of “forever chemicals.”</p><p>It is becoming a much larger question of <strong>how we identify them, quantify them, prevent contamination during analysis, understand their movement through food and the environment, comply with evolving regulations, and ultimately prove that they have actually been destroyed.</strong></p><blockquote><p><strong>This text has been automatically transcribed from a video presentation using AI technology. It may contain inaccuracies and is not guaranteed to be 100% correct.</strong></p></blockquote><blockquote><h4><strong>Concentrating on Chromatography Podcast</strong></h4><p>Dive into the frontiers of chromatography, mass spectrometry, and sample preparation with host David Oliva. Each episode features candid conversations with leading researchers, industry innovators, and passionate scientists who are shaping the future of analytical chemistry. From decoding PFAS detection challenges to exploring the latest in AI-assisted liquid chromatography, this show uncovers practical workflows, sustainability breakthroughs, and the real-world impact of separation science. Whether you’re a chromatographer, lab professional, or researcher you'll discover inspiring content!</p><p>You can find <strong>Concentrating on Chromatography Podcast </strong>in podcast apps:</p><ul><li><a target="_blank" rel="noopener noreferrer" href="https://open.spotify.com/show/1wZg67rCjoGju4yhqxI3tL"><strong>Spotify</strong></a></li><li><a target="_blank" rel="noopener noreferrer" href="https://podcasts.apple.com/tz/podcast/concentrating-on-chromatography/id1788429185"><strong>Apple podcast</strong></a></li><li><a target="_blank" rel="noopener noreferrer" href="https://podscan.fm/podcasts/concentrating-on-chromatography"><strong>podscan</strong></a></li></ul><p>and on <a target="_blank" rel="noopener noreferrer" href="https://www.youtube.com/@ChromatographyTalk/videos"><strong>YouTube channel</strong></a></p></blockquote>

PFAS in Water, Food & Packaging: Michelle Taylor on the "Forever Chemicals" Documentary Series

Article

Scientists

Environment

Food

Water

Interview

Science and research

Video

Since its establishment in 2011, CEITEC has quickly developed into a cutting-edge infrastructure for research which performs highly alongside the best institutes in Europe. Among the main priorities of CEITEC are the promotion of a motivating and dynamic international scientific environment, the provision of state-of-the-art research infrastructure, and the policy of open communication and equal opportunities.

CEITEC

Organomation, founded in 1959, designs and manufactures high-quality nitrogen evaporators and extraction systems. Known for innovation and durability, their lab instruments are used globally for efficient sample preparation with strong customer support.

Organomation

Waters Charged Aerosol Detector (CAD)

Waters Charged Aerosol Detector (CAD) enables universal quantitation of non-volatile and semi-volatile compounds independent of UV activity, with wide dynamic range and seamless integration with Empower™ Software.

<h3><strong>Expand Your Detection Range with a Detector Purpose-Built for Empower™ Software</strong></h3><p>Empower™ Software–based laboratories require detection solutions that are easy to adopt, robust, and capable of accurately quantifying non-volatile and semi-volatile compounds—regardless of chemical structure or UV activity.<br>The <strong>Waters Charged Aerosol Detector (CAD)</strong> is purposefully engineered to meet these demands, delivering universal, reliable detection fully integrated with Waters chromatography systems and Empower™ or MassLynx™ Software.</p><p>With a wide dynamic range exceeding four orders of magnitude, the Waters CAD enables <strong>simultaneous quantitation of low-level, non-UV-active analytes</strong>, along with related impurities and excipients, in a single run—helping laboratories reduce method development time, increase productivity, and improve process control.</p><h4><strong>Key Benefits</strong></h4><ul><li><strong>Universal detection without UV limitations</strong><br>Detect and quantify non-volatile and semi-volatile compounds independent of chromophore presence.</li><li><strong>Wide dynamic range (&gt;4 orders of magnitude)</strong><br>Confidently quantify trace-level components and major constituents simultaneously.</li><li><strong>Purpose-built for Empower™ Software</strong><br>Seamless integration into regulated workflows with Empower-based qualification and long-term software compatibility.</li><li><strong>Compatible across Waters LC platforms</strong><br>Integrates easily with Alliance™, Arc™, ACQUITY™ Arc, ACQUITY™ H-Class, ACQUITY™ I-Class, and UPLC™ Systems.</li><li><strong>Designed for robustness and ease of use</strong><br>Optimized hardware, simplified maintenance, and enhanced system protection features minimize downtime.</li></ul><h4><strong>Technical Specifications</strong></h4><h5><strong>Detector Performance</strong></h5><ul><li><strong>Detector flow rate:</strong><br>0.010–2.000 mL/min</li><li><strong>Dynamic range:</strong><br>Greater than four orders of magnitude (four individual power values)</li><li><strong>Sampling rate:</strong><br>Up to 200 Hz</li><li><strong>Number of channels:</strong><br>Four (4), supported by four (4) independent background current channels</li></ul><h5><strong>Temperature Control</strong></h5><ul><li><strong>Evaporation temperature:</strong><ul><li>Ambient (off)</li><li>Controlled range: 10 °C to 100 °C (0.1 °C increments)</li><li>Minimum of 5 °C above ambient</li></ul></li></ul><h5><strong>Gas Requirements</strong></h5><ul><li><strong>Inert gas supply:</strong><br>Nitrogen (recommended) or compressed air</li><li><strong>Inlet pressure:</strong><br>4.83–5.52 bar<br>(483–552 kPa, 70.0–80.0 psi)</li><li><strong>Gas consumption:</strong><br>Typically ≤ 5 L/min</li></ul><h5><strong>Diagnostics and Monitoring</strong></h5><ul><li><strong>Diagnostic channels include:</strong><ul><li>Nebulizer gas flow and pressure (psi)</li><li>Evaporator temperature (°C)</li><li>Ion trap voltage (V)</li><li>Charger current (µA)</li><li>Mixing chamber temperature (°C)</li></ul></li></ul><h5><strong>Electrical and Physical Specifications</strong></h5><ul><li><strong>Power requirements:</strong><br>100–240 VAC</li><li><strong>Dimensions:</strong><ul><li>Width: 34.3 cm (13.5 in)</li><li>Height: 20.8 cm (8.2 in)</li><li>Depth: 61.0 cm (24.0 in)</li></ul></li><li><strong>Biocompatible:</strong><br>No</li></ul><h5><strong>Software and System Compatibility</strong></h5><ul><li>Optimized for <strong>Empower™ Software</strong> and <strong>MassLynx™ Software</strong> control</li><li>Robust chromatography data system (CDS) communications to minimize downtime</li><li>Backward compatibility to <strong>Empower™ 3 Feature Release 4 Service Release 3 (SR3)</strong></li><li>Fully compatible with systems qualification and validation requirements in regulated environments</li></ul><h5><strong>Seamless Method Transfer Across Laboratories</strong></h5><p>The Waters CAD is designed to simplify method transfer within organizations and across external laboratories. It maintains method simplicity while adding enhanced tools for equivalency and reproducibility, reducing the need for revalidation when transitioning from legacy or third-party CAD solutions.</p><p>The intuitive <strong>ACQUITY™ console control panel</strong> enables straightforward operation and simplifies replacement of outdated technology across laboratory networks.</p><h5><strong>Designed for Ease of Use and Reliability</strong></h5><ul><li>Single filter manifold with <strong>push/pull filter replacement</strong></li><li>Easy-to-replace nebulizer for improved serviceability</li><li>Intelligent divert valve automatically sends flow to waste if gas pressure is lost or system errors occur</li><li>Enhanced <strong>leak detection and flood protection</strong>, safeguarding instruments in the event of CDS communication loss</li></ul><h5><strong>Recommended Use</strong></h5><p><strong>Accurate quantitation in:</strong></p><ul><li>HPLC, UHPLC, and UPLC separations</li><li>Preparative and purification workflows</li><li>Pharmaceutical QC and R&amp;D</li><li>Analysis of excipients, lipids, sugars, surfactants, and non-UV-active impurities</li></ul>

KNAUER AZURA DAD 2.1L Diode Array Detector

KNAUER AZURA® DAD 2.1L is a high-performance diode array detector for HPLC/UHPLC featuring 190–700 nm coverage, LightGuide technology, low drift, and up to 100 Hz data acquisition.

<p><strong>The KNAUER AZURA® DAD 2.1L is a high-performance diode array detector designed for analytical, semi-preparative, and preparative liquid chromatography applications. Combining advanced optical technology, excellent sensitivity, and intuitive operation, the detector offers an affordable solution for demanding HPLC and UHPLC workflows.</strong></p><p>The detector features a newly developed optical system and intelligent temperature management that ensure maximum sensitivity while minimizing baseline drift. Optional LightGuide flow cells based on total internal reflection technology maximize light throughput and minimize peak dispersion, resulting in superior signal-to-noise performance. An optional fiber-optic adapter allows physical separation of the flow cell from the detector, enhancing safety when handling hazardous, explosive, or toxic compounds.</p><h3><strong>Key Features</strong></h3><ul><li>High-performance diode array detector <strong>for HPLC and UHPLC</strong></li><li>Wavelength range <strong>from 190 to 700 nm</strong></li><li><strong>256-diode array</strong> with <strong>2 nm pixel pitch</strong></li><li>Advanced optical system with optimized temperature management</li><li><strong>LightGuide flow cell technology</strong> for enhanced signal-to-noise ratio</li><li>Wide selection of interchangeable analytical, semi-preparative, and preparative flow cells</li><li>Optional fiber-optic adapter for remote flow cell positioning</li><li>Internal holmium filter for wavelength verification</li><li>Integrated leak sensor</li><li>Front-access, tool-free lamp replacement</li><li>Compatible with <strong>ClarityChrom®, OpenLAB®, Chromeleon™, PurityChrom®, and Mobile Control</strong></li><li>LAN and analog connectivity for easy integration into virtually any LC system</li></ul><h3><strong>Technical Specifications</strong></h3><h4><strong>Detection System</strong></h4><ul><li><strong>Detector type:</strong> Diode Array Detector (DAD)</li><li><strong>Number of diodes: </strong>256</li><li><strong>Pixel pitch:</strong> 2 nm per diode</li><li><strong>Detection channels:</strong><ul><li>8 digital channels</li><li>4 analog channels</li></ul></li><li><strong>Light source: </strong>Deuterium lamp with integrated GLP chip</li><li><strong>Wavelength range: </strong>190–700 nm</li><li><strong>Spectral resolution: </strong>&lt;10 nm (FWHM)</li><li><strong>Slit width:</strong> 7.0 nm</li><li><strong>Wavelength accuracy: </strong>±1 nm</li><li><strong>Wavelength repeatability:</strong> ±0.1 nm</li></ul><h4><strong>Performance</strong></h4><ul><li><strong>Noise:</strong> ±5 µAU at 254 nm</li><li><strong>Drift:</strong> 400 µAU/h at 254 nm</li><li><strong>Linearity</strong>: &gt;2.0 AU at 274 nm</li><li><strong>Maximum data rate:</strong><ul><li>100 Hz via LAN</li><li>12.5 Hz via analog output</li></ul></li></ul><h4><strong>Flow Cells</strong></h4><ul><li>Flow cells are not included and must be ordered separately</li><li>Stainless steel and bio-inert configurations available</li><li>Optional LightGuide total-reflection technology</li></ul><h4><strong>Control and Communication</strong></h4><ul><li>LAN (RJ-45)</li><li>USB service interface</li><li>Analog inputs and outputs</li><li>Mobile Control stand-alone operation</li><li>Full software control through chromatography data systems</li></ul><h4><strong>GLP Functions</strong></h4><ul><li>Lamp identification</li><li>Lamp operating hours</li><li>Lamp ignition count</li><li>Comprehensive GLP reporting</li></ul><h4><strong>Power and Dimensions</strong></h4><ul><li><strong>Power supply:</strong> 100–240 V, 50–60 Hz</li><li><strong>Power consumption: </strong>75 W</li><li><strong>Dimensions (W × H × D):</strong> 361 × 158 × 523 mm</li><li><strong>Weight: </strong>12.2 kg</li></ul>

KNAUER AZURA DAD 6.1L Diode Array Detector

KNAUER AZURA® DAD 6.1L is a premium diode array detector with 190–1000 nm coverage, 1024-diode array, Polka-Dot optics, and LightGuide technology for maximum sensitivity.

<p><strong>The KNAUER AZURA® DAD 6.1L is a high-end diode array detector designed for analytical, semi-preparative, preparative, and process liquid chromatography applications. Featuring an extended wavelength range of 190–1000 nm, KNAUER Polka-Dot optical technology, and a 1024-diode array, it delivers exceptional sensitivity, spectral resolution, and baseline stability.</strong></p><p>The detector combines a high-brightness deuterium lamp and tungsten-halogen lamp to provide seamless UV and visible light detection. Optional LightGuide flow cells based on total internal reflection technology maximize light throughput while minimizing peak dispersion. An optional fiber-optic adapter enables physical separation of the flow cell from the detector, increasing safety when working with hazardous, explosive, or toxic compounds and protecting the detector from potential leaks at high flow rates.</p><h3><strong>Key Features</strong></h3><ul><li>High-end diode array detector<strong> for HPLC, UHPLC, and process chromatography</strong></li><li>Extended wavelength range <strong>from 190 to 1000 nm</strong></li><li>1024-diode array with <strong>0.8 nm pixel pitch</strong></li><li><strong>KNAUER</strong> <strong>Polka-Dot optical technology</strong> for maximum sensitivity</li><li><strong>LightGuide flow cell technology </strong>for superior signal-to-noise ratio</li><li>Wide range of analytical, semi-preparative, and preparative flow cells</li><li>Optional fiber-optic adapter for remote flow cell positioning</li><li>High-brightness deuterium and halogen lamps</li><li>Internal holmium filter for wavelength verification</li><li>Integrated leak sensor</li><li>Front-access lamp replacement</li><li>Compatible with <strong>ClarityChrom®, OpenLAB®, Chromeleon™, PurityChrom®</strong>, and <strong>Mobile Control</strong></li><li>Suitable for both laboratory and process applications</li></ul><h3><strong>Technical Specifications</strong></h3><h4><strong>Detection System</strong></h4><ul><li><strong>Detector type:</strong> Diode Array Detector (DAD)</li><li><strong>Number of diodes:</strong> 1024</li><li><strong>Pixel pitch: </strong>0.8 nm per diode</li><li><strong>Detection channels:</strong><ul><li>8 digital channels</li><li>4 analog channels</li></ul></li><li><strong>Light source:</strong><ul><li>High-brightness deuterium lamp</li><li>Tungsten-halogen lamp</li></ul></li><li><strong>Wavelength range:</strong> 190–1000 nm</li><li><strong>Spectral resolution: </strong>&lt;3.5 nm (FWHM)</li><li><strong>Slit width: </strong>2.5 nm</li><li><strong>Wavelength accuracy: </strong>±1 nm</li><li><strong>Wavelength repeatability:</strong> ±0.1 nm</li></ul><h4><strong>Performance</strong></h4><ul><li><strong>Noise:</strong> ±3.5 µAU at 254 nm</li><li><strong>Drift:</strong> 300 µAU/h at 254 nm</li><li><strong>Linearity: </strong>&gt;2.5 AU at 274 nm</li><li><strong>Maximum data rate:</strong><ul><li>100 Hz via LAN</li><li>12.5 Hz via analog output</li></ul></li></ul><h4><strong>Flow Cells</strong></h4><ul><li>Flow cells sold separately</li><li>Stainless-steel and bio-inert configurations available</li><li>Optional LightGuide total-reflection technology</li></ul><h4><strong>Control and Communication</strong></h4><ul><li>LAN (RJ-45)</li><li>USB service interface</li><li>Analog inputs and outputs</li><li>Mobile Control stand-alone operation</li><li>Full software integration with chromatography data systems</li></ul><h4><strong>GLP Functions</strong></h4><ul><li>Lamp identification</li><li>Lamp operating hours</li><li>Lamp ignition count</li><li>Comprehensive GLP reporting</li></ul><h4><strong>Power and Dimensions</strong></h4><ul><li><strong>Power supply: </strong>100–240 V, 50–60 Hz</li><li><strong>Power consumption: </strong>75 W</li><li><strong>Dimensions (W × H × D): </strong>361 × 158 × 523 mm</li><li><strong>Weight:</strong> 13.8 kg</li></ul>

KNAUER AZURA MWD 2.1L Multiwavelength Detector

KNAUER AZURA® MWD 2.1L is an 8-channel UV/VIS detector with 190–700 nm coverage, LightGuide technology, high sensitivity, and upgradeability to a DAD system.

<p><strong>The KNAUER AZURA® MWD 2.1L is a sensitive 8-channel UV/VIS multiwavelength detector designed for analytical, semi-preparative, and preparative liquid chromatography. Combining excellent performance, user-friendly operation, and affordability, it provides a versatile solution for routine and advanced LC applications.</strong></p><p>The detector features a newly developed optical unit and intelligent temperature management to ensure maximum sensitivity with minimal baseline drift. Optional LightGuide flow cells based on total internal reflection technology maximize light throughput and minimize peak dispersion, resulting in an optimized signal-to-noise ratio. An optional fiber-optic adapter allows physical separation of the flow cell from the detector, increasing safety when handling hazardous, explosive, or toxic materials.</p><p>The <strong>AZURA® MWD 2.1L</strong> can also be upgraded to a full <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/2423"><strong>AZURA® DAD 2.1L diode array detector</strong></a>, protecting future investments and enabling greater analytical flexibility.</p><h3><strong>Key Features</strong></h3><ul><li>Sensitive <strong>8-channel UV/VIS multiwavelength detector</strong></li><li>Wavelength range<strong> from 190 to 700 nm</strong></li><li>Simultaneous monitoring of <strong>up to 8 digital channels</strong></li><li>LightGuide flow cell technology for improved sensitivity and signal-to-noise ratio</li><li>Intelligent temperature management for minimal baseline drift</li><li>Wide selection of analytical, semi-preparative, and preparative flow cells</li><li>Optional fiber-optic adapter for remote flow cell positioning</li><li>Internal holmium filter for wavelength verification</li><li>Integrated leak sensor</li><li>Front-access lamp replacement</li><li>Upgradeable to the AZURA® DAD 2.1L diode array detector</li><li>Compatible with <strong>ClarityChrom®, OpenLAB®, Chromeleon™, PurityChrom®</strong>, and <strong>Mobile Control</strong></li></ul><h3><strong>Technical Specifications</strong></h3><h4><strong>Detection System</strong></h4><ul><li><strong>Detector type: </strong>Multiwavelength Detector (MWD)</li><li><strong>Digital channels: </strong>8</li><li><strong>Analog channels:</strong> 4</li><li><strong>Light source: </strong>Deuterium lamp with integrated GLP chip</li><li><strong>Wavelength range: </strong>190–700 nm</li><li><strong>Spectral resolution: </strong>&lt;10 nm (FWHM)</li><li><strong>Slit width: </strong>7.0 nm</li><li><strong>Wavelength accuracy: </strong>±1 nm</li><li><strong>Wavelength repeatability: </strong>±0.1 nm</li></ul><h4><strong>Performance</strong></h4><ul><li><strong>Noise:</strong> ±5 µAU at 254 nm</li><li><strong>Drift:</strong> 400 µAU/h at 254 nm</li><li><strong>Linearity:</strong> &gt;2.0 AU at 274 nm</li><li><strong>Maximum data rate:</strong><ul><li>100 Hz via LAN</li><li>12.5 Hz via analog output</li></ul></li></ul><h4><strong>Flow Cells</strong></h4><ul><li>Flow cells sold separately</li><li>Stainless-steel and bio-inert configurations available</li><li>Optional LightGuide total-reflection technology</li></ul><h4><strong>Control and Communication</strong></h4><ul><li>LAN (RJ-45)</li><li>USB service interface</li><li>Analog inputs and outputs</li><li>Mobile Control stand-alone operation</li><li>Full software integration with chromatography data systems</li></ul><h4><strong>GLP Functions</strong></h4><ul><li>Lamp identification</li><li>Lamp operating hours</li><li>Lamp ignition count</li><li>Comprehensive GLP reporting</li></ul><h4><strong>Power and Dimensions</strong></h4><ul><li><strong>Power supply:</strong> 100–240 V, 50–60 Hz</li><li><strong>Power consumption: </strong>75 W</li><li><strong>Dimensions (W × H × D):</strong> 361 × 158 × 523 mm</li><li><strong>Weight:</strong> 12.2 kg</li></ul>

KNAUER AZURA VWD 2.1L Variable Wavelength Detector

Flexible UV/VIS detector with up to four wavelengths, conductivity, temperature, and optional pH monitoring. Ideal for HPLC, FPLC, and purification applications.

<p><strong>The KNAUER AZURA® VWD 2.1L is a versatile variable wavelength detector designed for analytical HPLC, FPLC, and purification applications. Combining UV/VIS detection with optional conductivity, temperature, and pH monitoring, it provides exceptional flexibility for a wide range of chromatographic workflows.</strong></p><p>The detector supports simultaneous monitoring of up to four UV/VIS wavelengths across a broad spectral range from 190 to 900 nm. When equipped with KNAUER’s patented <strong>CombiLight flow cell</strong>, it can simultaneously measure UV absorbance, conductivity, and eluent temperature. An optional pH electrode further extends functionality by enabling real-time pH monitoring during chromatographic separations.</p><h3><strong>Key Features</strong></h3><ul><li>Variable wavelength UV/VIS detector <strong>for analytical HPLC and FPLC</strong></li><li>Simultaneous monitoring of <strong>up to 4 UV/VIS wavelengths</strong></li><li>Broad wavelength range from <strong>190 to 900 nm</strong></li><li>Optional conductivity monitoring up to <strong>1000 mS/cm</strong></li><li>Integrated temperature monitoring</li><li>Optional real-time pH measurement</li><li>Compatible with patented KNAUER CombiLight flow cell technology</li><li>Convertible between flow-cell and fiber-optic configurations</li><li>Internal holmium oxide filter for wavelength verification</li><li>Adjustable leak sensor for enhanced operational safety</li><li>Front-access lamp and flow-cell replacement</li><li>Comprehensive GLP functionality with component recognition</li><li>Suitable for analytical, preparative, and purification workflows</li></ul><h3><strong>Technical Specifications</strong></h3><h4><strong>Detection System</strong></h4><ul><li><strong>Detection channels:</strong><ul><li>4 × UV/VIS</li><li>1 × Conductivity</li><li>1 × Temperature</li><li>1 × pH</li></ul></li><li><strong>Wavelength range:</strong> 190–900 nm</li><li><strong>Light source:</strong><ul><li>High-brightness deuterium lamp</li><li>Halogen lamp</li><li>Integrated GLP chip</li></ul></li><li><strong>Flow cell:</strong> Not included</li><li><strong>Optional display:</strong> Mobile Control</li></ul><h4><strong>UV/VIS Performance</strong></h4><ul><li><strong>Spectral bandwidth:</strong> 6 nm (FWHM)</li><li><strong>Wavelength accuracy: </strong>±1.5 nm</li><li><strong>Wavelength precision:</strong> 0.4 nm</li><li><strong>Baseline noise: </strong>±7.5 µAU at 254 nm</li><li><strong>Baseline drift:</strong> 200 µAU/h at 254 nm</li><li><strong>Linearity: </strong>&gt;2.5 AU at 274 nm</li><li><strong>Maximum data rate:</strong><ul><li>100 Hz (single UV channel)</li><li>5 Hz (four UV channels)</li></ul></li></ul><h4><strong>Conductivity Monitoring</strong></h4><ul><li><strong>Measurement range: </strong>0.1–1000 mS/cm</li><li><strong>Accuracy:</strong> ±2% or ±0.5 mS/cm (whichever is greater)</li></ul><h4><strong>pH Monitoring</strong></h4><ul><li><strong>Measurement range: </strong>pH 0–14</li><li><strong>Accuracy: </strong>±0.1 pH (between pH 2–12)</li></ul><h4><strong>Temperature Monitoring</strong></h4><ul><li><strong>Measurement range</strong>: 1–99 °C</li><li><strong>Accuracy</strong>: ±1.5 °C (4–40 °C)</li></ul><h4><strong>System Functions</strong></h4><ul><li>Internal holmium oxide filter for wavelength verification</li><li>Adjustable leak sensor</li><li>Automatic integration time</li><li>User-selectable time constants:</li></ul><h4><strong>GLP Functions</strong></h4><ul><li>Lamp recognition</li><li>Operating hours tracking</li><li>Light source lifetime monitoring</li><li>Flow-cell recognition</li><li>Detailed GLP reporting</li></ul><h4><strong>Maintenance</strong></h4><ul><li>Front-accessible deuterium lamp</li><li>Front-accessible halogen lamp</li><li>Front-accessible flow cell</li><li>Simplified service procedures</li></ul><h3><strong>Applications</strong></h3><ul><li>Analytical HPLC</li><li>FPLC systems</li><li>Protein purification</li><li>Biopharmaceutical analysis</li><li>Process chromatography</li><li>Preparative chromatography</li><li>Method development</li><li>Quality control laboratories</li><li>UV/VIS monitoring of purification processes</li></ul>

KNAUER AZURA UVD 2.1L UV/VIS Detector

Compact and affordable UV/VIS detector for routine HPLC and fast LC applications, featuring 190–750 nm wavelength range and flexible flow-cell options.

<p><strong>The KNAUER AZURA® UVD 2.1L is a cost-effective UV/VIS detector designed for routine HPLC applications, including fast liquid chromatography methods. Combining reliable performance, compact dimensions, and flexible flow-cell options, it provides an ideal solution for analytical and preparative chromatography laboratories seeking dependable UV detection at an attractive price point.</strong></p><p>The detector utilizes a deuterium lamp covering the wavelength range <strong>from 190 to 750 nm</strong> and offers excellent sensitivity and stability for everyday chromatographic analysis. Its smart mechanical design allows quick and easy access to the flow cell, minimizing maintenance time and maximizing instrument uptime.</p><p>A wide range of interchangeable flow cells is available, including stainless-steel and bio-inert versions suitable for analytical, semi-preparative, and preparative LC applications with <strong>flow rates ranging from 10 μL/min up to 10 L/min</strong>. The detector integrates seamlessly into virtually any LC system through LAN communication, analog I/O, and compatibility with leading chromatography software packages.</p><h3><strong>Key Features</strong></h3><ul><li><strong>Cost-effective UV/VIS detector </strong>for routine HPLC applications</li><li>Suitable for fast LC methods</li><li>Wavelength range <strong>from 190 to 750 nm</strong></li><li>Single-channel variable wavelength detection</li><li><strong>Deuterium lamp </strong>with integrated GLP chip</li><li>Compact and robust instrument design</li><li>Easily accessible flow cell for rapid replacement</li><li>Wide selection of interchangeable flow cells</li><li>Compatible with analytical and preparative LC applications</li><li><strong>Flow rates from 10 μL/min up to 10 L/min</strong></li><li>Integrated leak sensor</li><li>Automatic integration time adjustment</li><li>LAN and analog communication interfaces</li><li>Comprehensive GLP functionality</li><li><strong>Compatible with ClarityChrom®, OpenLAB®, Chromeleon™, ChromGate®, PurityChrom®</strong>, and <strong>Mobile Control</strong></li></ul><h3><strong>Technical Specifications</strong></h3><h4><strong>Detection System</strong></h4><ul><li><strong>Detection channels:</strong> 1</li><li><strong>Light source: </strong>Deuterium (D₂) lamp with integrated GLP chip</li><li><strong>Wavelength range:</strong> 190–750 nm</li><li><strong>Spectral bandwidth: </strong>11 nm (FWHM)</li><li><strong>Wavelength accuracy:</strong> ±2.5 nm</li><li><strong>Wavelength precision:</strong> 0.3 nm</li></ul><h4><strong>Performance</strong></h4><ul><li><strong>Noise:</strong> ±15 µAU at 254 nm</li><li><strong>Drift: </strong>300 µAU/h at 254 nm</li><li><strong>Linearity:</strong> &gt;2.0 AU at 274 nm</li><li><strong>Maximum data rate:</strong><ul><li>50 Hz via LAN</li><li>20 Hz via analog output</li></ul></li></ul><h4><strong>Flow Cells</strong></h4><ul><li>Flow cells sold separately</li><li>Stainless-steel and bio-inert options available</li><li>Suitable for analytical and preparative chromatography</li><li>Flow rates from 10 μL/min to 10 L/min</li></ul><h4><strong>Communication and Control</strong></h4><ul><li>LAN communication</li><li>Analog input/output</li><li>Mobile Control software</li><li>Event control</li><li>Terminal protocol</li></ul><h4><strong>Inputs</strong></h4><ul><li>Error (IN)</li><li>Start (IN)</li><li>Autozero</li><li>0–10 V Analog (IN)</li></ul><h4><strong>Outputs</strong></h4><ul><li>Events 1–3</li><li>+5 V</li><li>24 V Valve</li></ul><h4><strong>Analog Output</strong></h4><ul><li>1 × 0–5 V scalable</li><li>20-bit resolution</li><li>Adjustable offset</li></ul><h4><strong>Programming Functions</strong></h4><ul><li>Timed wavelength programming</li><li>Event programming</li><li>Fraction valve control</li><li>Wake-up functions</li><li>Up to 9 programs</li><li>Up to 50 program lines</li></ul><h4><strong>GLP Functions</strong></h4><ul><li>Lamp recognition</li><li>Operating hours tracking</li><li>Lamp operating hours</li><li>Lamp ignition counter</li><li>Detailed GLP reports</li></ul><h4><strong>Safety and Maintenance</strong></h4><ul><li>Integrated leak sensor</li><li>Easy-access flow cell compartment</li><li>Front-access maintenance</li><li>Minimal downtime for service operations</li></ul><h4><strong>Environmental Conditions</strong></h4><ul><li><strong>Operating temperature:</strong> 4–40 °C</li><li><strong>Humidity:</strong> &lt;90% non-condensing</li></ul><h4><strong>Power and Dimensions</strong></h4><ul><li><strong>Power supply: </strong>100–240 V, 50–60 Hz</li><li><strong>Power consumption: </strong>65 W</li><li><strong>Dimensions (W × H × D):</strong> 361 × 158 × 523 mm</li><li><strong>Weight: </strong>5.9 kg</li></ul><h3><strong>Applications</strong></h3><ul><li>Routine HPLC analysis</li><li>Fast LC methods</li><li>Pharmaceutical quality control</li><li>Food and beverage analysis</li><li>Environmental testing</li><li>Chemical analysis</li><li>Preparative liquid chromatography</li><li>Academic and research laboratories</li></ul>

KNAUER AZURA UVD 2.1S UV Detector

Compact single-wavelength UV detector for routine HPLC applications with 190–500 nm range, flexible flow-cell options, and seamless software integration.

<p><strong>The KNAUER AZURA® UVD 2.1S is a compact, cost-effective single-wavelength UV detector designed for routine HPLC applications. Despite its small footprint, it delivers reliable performance and excellent technical specifications, making it one of the most compact HPLC UV detectors available on the market.</strong></p><p>Equipped with a deuterium lamp covering the <strong>wavelength range from 190 to 500 nm</strong>, the detector is suitable for a broad range of analytical chromatography applications. Its intelligent design provides quick access to the flow cell, enabling fast replacement and simplified maintenance. A wide selection of interchangeable flow cells is available, including bio-inert and stainless-steel versions for analytical and preparative LC applications with <strong>flow rates ranging from 10 μL/min up to 10 L/min</strong>.</p><h3><strong>Key Features</strong></h3><ul><li>Compact single-wavelength UV detector for HPLC</li><li>One of the smallest HPLC UV detectors available</li><li>Wavelength range <strong>from 190 to 500 nm</strong></li><li>Deuterium lamp with integrated GLP chip</li><li>Suitable for routine analytical applications</li><li>Compact AZURA® housing design</li><li>Easily accessible flow cell for rapid replacement</li><li>Wide range of interchangeable flow cells available</li><li>Compatible with analytical and preparative LC applications</li><li><strong>Flow rates from 10 μL/min up to 10 L/min</strong></li><li>Stand-alone operation via front panel</li><li><strong>LAN, RS-232</strong>, and analog communication interfaces</li><li>Compatible with major chromatography data systems</li><li>Available as a module for <strong>AZURA® ASM 2.2L</strong></li><li>Low maintenance requirements</li></ul><h3><strong>Technical Specifications</strong></h3><h4><strong>Detection System</strong></h4><ul><li><strong>Detection channels: </strong>1</li><li><strong>Light source:</strong> Deuterium (D₂) lamp with integrated GLP chip</li><li><strong>Wavelength range:</strong> 190–500 nm</li><li><strong>Spectral bandwidth: </strong>13 nm (FWHM)</li><li><strong>Wavelength accuracy: </strong>±3 nm</li><li><strong>Wavelength precision: </strong>0.7 nm</li></ul><h4><strong>Performance</strong></h4><ul><li><strong>Noise:</strong> ±20 µAU at 254 nm</li><li><strong>Drift:</strong> 300 µAU/h at 254 nm</li><li><strong>Linearity:</strong> &gt;2.0 AU at 274 nm</li><li><strong>Maximum data rate:</strong><ul><li>50 Hz via LAN</li><li>20 Hz via analog output</li><li>10 Hz via RS-232</li></ul></li></ul><h4><strong>Flow Cells</strong></h4><ul><li>Flow cells sold separately</li><li>Bio-inert and stainless-steel options available</li><li>Suitable for analytical and preparative chromatography</li><li>Flow rates from 10 μL/min to 10 L/min</li></ul><h4><strong>Communication and Control</strong></h4><ul><li>Front panel operation</li><li>Mobile Control software</li><li>Software control</li><li>Event control</li><li>Analog control</li><li>Terminal protocol</li></ul><h4><strong>Interfaces</strong></h4><ul><li>LAN (RJ-45)</li><li>RS-232 (SUB-D 9)</li><li>Multi-pin connector</li><li>Analog interface (RCA connector)</li></ul><h4><strong>Inputs</strong></h4><ul><li>Autozero</li><li>Start (IN)</li><li>Error (IN/OUT)</li><li>0–10 V Analog Input</li></ul><h4><strong>Outputs</strong></h4><ul><li>Error (OUT/IN)</li></ul><h4><strong>Analog Signals</strong></h4><ul><li>Analog wavelength input: 0–10 V</li><li>Analog output: 1 × ±2.5 V scalable</li><li>Resolution: 20-bit</li></ul><h4><strong>GLP Functions</strong></h4><ul><li>Lamp operating hours monitoring</li></ul><h4><strong>Display</strong></h4><ul><li>LED display</li></ul><h4><strong>Environmental Conditions</strong></h4><ul><li><strong>Operating temperature:</strong> 4–40 °C</li><li><strong>Humidity</strong>: &lt;90% non-condensing</li></ul><h4><strong>Power and Dimensions</strong></h4><ul><li><strong>Power supply:</strong><ul><li>Input: 100–240 V</li><li>Output: 24 V DC</li></ul></li><li><strong>Power consumption: </strong>60 W</li><li><strong>Dimensions (W × H × D):</strong> 121 × 129 × 187 mm</li><li><strong>Weight: </strong>1.5 kg</li></ul><h3><strong>Applications</strong></h3><ul><li>Routine HPLC analysis</li><li>Quality control laboratories</li><li>Pharmaceutical analysis</li><li>Food and beverage testing</li><li>Environmental analysis</li><li>Academic research</li><li>Preparative liquid chromatography</li><li>Compact and space-limited laboratory environments</li></ul>

KNAUER AZURA RID 2.1L Refractive Index Detector

Sensitive refractive index detector for HPLC and GPC applications. Ideal for sugars, alcohols, lipids, and polymers with excellent stability and low maintenance.

<p><strong>The KNAUER AZURA® RID 2.1L is a highly sensitive and cost-effective differential refractive index detector designed for compounds that exhibit little or no UV absorbance. It is ideally suited for the analysis of sugars, alcohols, lipids, polymers, and other non-UV active substances in analytical HPLC and selected GPC applications.</strong></p><p>The detector incorporates an intelligently designed optical system with advanced temperature control, ensuring exceptional sensitivity, rapid baseline stabilization, and excellent reproducibility. A long-life LED light source, highly pressure-resistant flow cell, integrated leak management, and advanced diagnostic functions contribute to reliable operation and minimal maintenance requirements.</p><h3><strong>Key Features</strong></h3><ul><li>Differential refractive index detector for <strong>analytical HPLC and selected GPC applications</strong></li><li>Ideal for compounds with little or no UV activity</li><li>Suitable for sugars, alcohols, lipids, polymers, and related compounds</li><li>Highly sensitive optical system with advanced temperature control</li><li>Fast baseline stabilization and excellent reproducibility</li><li><strong>Long-life LED light source</strong></li><li>Wide refractive index measurement range</li><li>High-pressure resistant flow cell included</li><li>Low dispersion volume for improved chromatographic performance</li><li><strong>Maximum flow rate up to 10 mL/min</strong></li><li>Integrated internal and external leak management</li><li>Comprehensive diagnostics and GLP reporting</li><li>LAN and analog connectivity</li><li><strong>Compatible with ClarityChrom®, OpenLAB®, Chromeleon™, PurityChrom®, and Mobile Control software</strong></li></ul><h3><strong>Technical Specifications</strong></h3><h4><strong>Detection System</strong></h4><ul><li><strong>Detection channels:</strong> 1</li><li><strong>Light source: L</strong>ong-life LED</li><li><strong>Refractive index range: </strong>1.00–1.75 RIU</li></ul><h4><strong>Performance</strong></h4><ul><li><strong>Noise: </strong>±2.5 nRIU</li><li><strong>Drift: </strong>200 nRIU/h</li><li><strong>Linearity:</strong> &gt;1000 µRIU</li><li><strong>Maximum data rate:</strong><ul><li>100 Hz via LAN</li><li>20 Hz via analog output</li></ul></li></ul><h4><strong>Flow Cell</strong></h4><ul><li>Included as standard</li><li><strong>Backpressure resistance:</strong> 5 bar</li><li><strong>Maximum flow rate: </strong>10 mL/min (water)</li><li><strong>Flow cell volume: </strong>15 µL</li><li><strong>Dispersion volume:</strong> 43 µL</li><li><strong>Wetted materials:</strong><ul><li>Stainless steel</li><li>Quartz</li><li>PTFE</li></ul></li></ul><h4><strong>Temperature Control</strong></h4><ul><li>OFF mode available</li><li>Adjustable from 30 °C to 55 °C</li><li>1 °C increments</li></ul><h4><strong>System Functions</strong></h4><ul><li>Full-range autozero</li><li>Internal leak sensor</li><li>External leak management</li><li>Advanced diagnostics functions</li></ul><h4><strong>Communication and Control</strong></h4><ul><li>Mobile Control software</li><li>Chromatography software control</li><li>Event control</li><li>Analog control</li><li>Terminal protocol</li></ul><h4><strong>Inputs</strong></h4><ul><li>Error (IN)</li><li>Start (IN)</li><li>Autozero</li><li>Flush (IN)</li></ul><h4><strong>Outputs</strong></h4><ul><li>Event 1</li><li>Start (OUT)</li><li>Error (OUT)</li><li>+5 V</li><li>24 V valve output</li></ul><h4><strong>Analog Output</strong></h4><ul><li>1 × 0–2.5 V scalable</li><li>20-bit resolution</li><li>Adjustable offset</li></ul><h4><strong>Interfaces</strong></h4><ul><li>2 × LAN (RJ-45, dual IP stack)</li><li>USB (service only)</li><li>Multi-pin connector</li><li>Analog interface (cinch connector)</li></ul><h4><strong>GLP Functions</strong></h4><ul><li>Operating hours tracking</li><li>Light source operating hours</li><li>Detailed GLP reports</li></ul><h4><strong>Environmental Conditions</strong></h4><ul><li><strong>Operating temperature: </strong>4–40 °C</li><li><strong>Humidity:</strong> &lt;90% non-condensing</li></ul><h4><strong>Power and Dimensions</strong></h4><ul><li><strong>Power supply:</strong> 100–240 V, 50–60 Hz</li><li><strong>Power consumption: </strong>65 W</li><li><strong>Dimensions (W × H × D):</strong> 361 × 158 × 523 mm</li><li><strong>Weight:</strong> 10.8 kg</li></ul><h4><strong>Optional Accessories</strong></h4><ul><li>Mobile Control software interface</li></ul><h3><strong>Applications</strong></h3><ul><li>Sugar analysis</li><li>Carbohydrate profiling</li><li>Alcohol determination</li><li>Lipid analysis</li><li>Polymer characterization</li><li>Gel permeation chromatography (GPC)</li><li>Food and beverage testing</li><li>Pharmaceutical analysis</li><li>Chemical and petrochemical laboratories</li><li>Quality control and research applications</li></ul>

KNAUER RF-20A Fluorescence Detector

High-sensitivity fluorescence detector for HPLC with 200–650 nm wavelength range, ≥1200 S/N ratio, fast 10 ms response, and excellent trace-level detection performance.

<p><strong>The KNAUER RF-20A Fluorescence Detector is a highly sensitive fluorescence detector designed for demanding HPLC applications requiring exceptional selectivity and trace-level detection. Covering a wavelength range from 200 to 650 nm, the RF-20A delivers outstanding sensitivity, excellent reproducibility, and reliable operation for both routine and advanced chromatographic analyses.</strong></p><p>With a signal-to-noise ratio of at least 1200 for the water Raman band, the detector is ideally suited for trace-level determinations in pharmaceutical, environmental, food, and biochemical applications. A fast 10 ms response time supports high-speed chromatography without compromising chromatographic resolution. Time-programmed wavelength switching allows optimal excitation and emission settings throughout the run, enabling highly sensitive multi-component analysis.</p><h3><strong>Key Features</strong></h3><ul><li>High-sensitivity fluorescence detector for HPLC applications</li><li><strong>Wavelength range from 200 to 650 nm</strong></li><li><strong>Signal-to-noise ratio ≥1200</strong> (water Raman band)</li><li>Excellent performance for trace-level analysis</li><li><strong>Fast 10 ms response time</strong></li><li>Time-programmable wavelength switching</li><li>Multi-component analysis at optimal wavelengths</li><li><strong>Long-life xenon lamp</strong> (approx. 2,000 hours)</li><li>Front-accessible lamp and flow cell</li><li>No optical adjustment required after lamp replacement</li><li>Minimal maintenance requirements</li><li>Stand-alone operation via keypad and display</li><li><strong>Compatible with ClarityChrom®, OpenLAB®, and PurityChrom® software</strong></li><li>Easy integration into existing LC systems</li></ul><h3><strong>Technical Specifications</strong></h3><h4><strong>Detection System</strong></h4><ul><li><strong>Detection channels: </strong>1</li><li><strong>Number of signals:</strong> 1</li><li><strong>Light source: </strong>Xenon lamp</li><li><strong>Wavelength range:</strong> 200–650 nm</li><li><strong>Spectral bandwidth:</strong> 20 nm</li><li><strong>Wavelength accuracy:</strong> ±2 nm</li><li><strong>Wavelength precision:</strong> ±0.2 nm</li></ul><h4><strong>Sensitivity</strong></h4><ul><li><strong>Signal-to-noise ratio: </strong>≥1200 (water Raman band)</li><li><strong>Sensitivity settings:</strong><ul><li>HIGH (×1)</li><li>MED (×32)</li><li>LOW (×1024)</li></ul></li></ul><h4><strong>Flow Cell</strong></h4><ul><li>Standard flow cell included</li><li><strong>Flow cell volume: </strong>12 µL</li><li><strong>Wetted materials:</strong><ul><li>SUS316L stainless steel</li><li>PTFE</li><li>Quartz</li></ul></li></ul><h4><strong>Signal Processing</strong></h4><ul><li><strong>Response time: </strong>10 ms</li><li><strong>Gain settings: </strong>×1, ×4, ×16</li></ul><h4><strong>Functions</strong></h4><ul><li>Autozero function</li><li>Baseline shift function</li><li>Time-programmed wavelength switching</li></ul><h4><strong>Communication</strong></h4><ul><li>RS-232 interface</li><li>Analog output</li><li>Software control</li><li>Stand-alone operation via keypad and display</li></ul><h4><strong>Environmental Conditions</strong></h4><ul><li><strong>Operating temperature:</strong> 4–35 °C</li><li><strong>Relative humidity: </strong>20–85% (non-condensing)</li></ul><h4><strong>Power and Dimensions</strong></h4><ul><li><strong>Power supply: </strong>AC 220–240 V</li><li><strong>Frequency: </strong>50/60 Hz</li><li><strong>Power consumption: </strong>400 VA</li><li><strong>Dimensions (W × H × D):</strong> 260 × 210 × 420 mm</li><li><strong>Weight:</strong> 16 kg</li></ul><h3><strong>Applications</strong></h3><ul><li>Pharmaceutical analysis</li><li>Impurity profiling</li><li>Environmental monitoring</li><li>Food and beverage testing</li><li>Amino acid analysis</li><li>Vitamin analysis</li><li>PAH analysis</li><li>Biomolecule detection</li><li>Trace contaminant determination</li><li>Research and quality control laboratories</li></ul>

KNAUER RF-20Axs Fluorescence Detector

High-sensitivity fluorescence detector with 200–750 nm range, temperature-controlled flow cell, ≥2000 S/N ratio, and exceptional performance for trace-level HPLC analysis.

<p><strong>The KNAUER RF-20Axs Fluorescence Detector is the high-performance version of the </strong><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/2430"><strong>RF-20A fluorescence detector</strong></a><strong> series, designed for laboratories requiring maximum sensitivity, exceptional reproducibility, and advanced validation capabilities. Covering a wavelength range from 200 to 750 nm, the detector supports both routine and demanding high-performance HPLC applications.</strong></p><p>With a signal-to-noise ratio of at least 2000 for the water Raman band, the RF-20Axs is ideally suited for trace-level analysis. The temperature-controlled flow cell with integrated cooling function ensures outstanding stability, reproducibility, and sensitivity, even during long analytical sequences. The detector’s fast 10 ms response time supports ultra-fast chromatography without compromising chromatographic resolution.</p><p>The RF-20Axs enables highly sensitive multi-component analysis through programmable wavelength switching during a chromatographic run. An integrated low-pressure mercury lamp allows convenient verification of wavelength accuracy, supporting validation and compliance requirements. Both the xenon lamp and flow cell are easily accessible from the front panel, and lamp replacement requires no optical adjustment. Combined with a lamp lifetime of approximately 2,000 hours, this minimizes downtime and operating costs.</p><h3><strong>Key Features</strong></h3><ul><li>High-sensitivity fluorescence detector for <strong>HPLC applications</strong></li><li>Wavelength range <strong>from 200 to 750 nm</strong></li><li><strong>Signal-to-noise ratio ≥2000</strong> (water Raman band)</li><li>Designed for trace-level analysis</li><li>Temperature-controlled flow cell with cooling function</li><li><strong>Fast 10 ms response time</strong></li><li>Programmable wavelength switching during analysis</li><li>Simultaneous multi-component analysis at optimal wavelengths</li><li>Integrated low-pressure mercury lamp for wavelength verification</li><li><strong>Long-life xenon lamp </strong>with approximately <strong>2,000 operating hours</strong></li><li>Front-accessible lamp and flow cell</li><li>No optical realignment required after lamp replacement</li><li>Advanced validation and support functions</li><li>Stand-alone operation via keypad and display</li><li>Compatible with <strong>ClarityChrom®, OpenLAB®, and PurityChrom® software</strong></li><li>Easy integration into virtually any LC system</li></ul><h3><strong>Technical Specifications</strong></h3><h4><strong>Detection System</strong></h4><ul><li><strong>Detection channels: </strong>2</li><li><strong>Number of signals: </strong>2</li><li><strong>Light source:</strong><ul><li>Xenon lamp</li><li>Low-pressure mercury lamp for wavelength accuracy verification</li></ul></li><li><strong>Wavelength range: </strong>200–750 nm</li><li><strong>Spectral bandwidth: </strong>20 nm</li><li><strong>Wavelength accuracy:</strong> ±2 nm</li><li><strong>Wavelength precision: </strong>±0.2 nm</li></ul><h4><strong>Sensitivity</strong></h4><ul><li><strong>Signal-to-noise ratio: </strong>≥2000 (water Raman band)</li><li><strong>Sensitivity settings:</strong><ul><li>HIGH (×1)</li><li>MED (×32)</li><li>LOW (×1024)</li></ul></li></ul><h4><strong>Flow Cell</strong></h4><ul><li>Standard flow cell included</li><li>Temperature-controlled flow cell</li><li>Integrated cooling function</li><li><strong>Flow cell volume:</strong> 12 µL</li><li><strong>Wetted materials:</strong><ul><li>SUS316L stainless steel</li><li>PTFE</li><li>Quartz</li></ul></li></ul><h4><strong>Signal Processing</strong></h4><ul><li><strong>Response time: </strong>10 ms</li><li><strong>Gain settings: </strong>×1, ×4, ×16</li></ul><h4><strong>Functions</strong></h4><ul><li>Autozero function</li><li>Baseline shift function</li><li>Time-programmed wavelength switching</li><li>Wavelength accuracy verification using integrated mercury lamp</li></ul><h4><strong>Communication</strong></h4><ul><li>RS-232 interface</li><li>Analog output</li><li>Software control</li><li>Stand-alone operation via keypad and display</li></ul><h4><strong>Environmental Conditions</strong></h4><ul><li><strong>Operating temperature:</strong> 4–35 °C</li><li><strong>Relative humidity:</strong> 20–85% (non-condensing)</li></ul><h4><strong>Power and Dimensions</strong></h4><ul><li><strong>Power supply: </strong>AC 220–240 V</li><li><strong>Frequency:</strong> 50/60 Hz</li><li><strong>Power consumption: </strong>400 VA</li><li><strong>Dimensions (W × H × D): </strong>260 × 210 × 420 mm</li><li><strong>Weight:</strong> 18 kg</li></ul><h3><strong>Applications</strong></h3><ul><li>Trace-level pharmaceutical analysis</li><li>Impurity profiling</li><li>Environmental monitoring</li><li>Food safety testing</li><li>Amino acid analysis</li><li>Vitamin analysis</li><li>PAH analysis</li><li>Biomolecule detection</li><li>Fluorescent labeling applications</li><li>Research and quality control laboratories</li></ul>

Products from category HPLC detectors focused on HPLC - page 1

Related content

PFAS in Water, Food & Packaging: Michelle Taylor on the "Forever Chemicals" Documentary Series

CEITEC Microrobots Could Speed Up Beer Production and Food Quality Control

The Importance of Detecting Per- and Polyfluoroalkyl Substances (PFAS)