Per- and polyfluoroalkyl substances (PFAS) have earned the moniker "forever chemicals" due to their extreme persistence in the environment. Their detection is crucial for protecting public health and the environment as these synthetic compounds continue to pose significant challenges worldwide. This comprehensive exploration examines why PFAS detection matters, current detection methods, and future directions in addressing PFAS contamination.<h3>Understanding PFAS and Their Health Impacts</h3>PFAS are a class of synthetic organic compounds with diverse structures, properties, and uses. Despite their diversity, all PFAS contain perfluoroalkyl moieties that are extremely resistant to environmental and metabolic degradation [1]. This high persistence is a defining characteristic that makes PFAS management particularly challenging.<h3>Documented Health Effects</h3>Current scientific research has linked PFAS exposure to numerous adverse health outcomes:<ul><li>Reproductive effects including decreased fertility and increased high blood pressure in pregnant women [8]</li><li>Developmental effects in children such as low birth weight, accelerated puberty, and behavioral changes [8]</li><li>Reduced immune system function, including decreased vaccine response</li><li>Interference with natural hormones and endocrine disruption</li><li>Increased cholesterol levels and obesity risk</li><li>Increased risk of several cancers, including prostate, kidney, testicular, oral cavity/pharynx, brain, and endocrine cancers [3]</li></ul>A 2023 study linked PFAS-contaminated water with up to a 33% increase in cancer incidence in affected areas [3]. The study compared regions with elevated PFAS levels to cancer data from the National Cancer Institute, finding higher incidences of various cancers after controlling for factors like smoking and obesity.<h3>Environmental Persistence and Contamination</h3>The extreme persistence of PFAS represents a fundamental concern for environmental management. PFAS are considered the most environmentally persistent substances among organic chemicals [7]. This persistence means that even if all PFAS uses were immediately phased out, existing contamination would continue to affect ecosystems and water supplies for generations.A 2023 study at a military fire training site estimated that PFAS contamination will persist for centuries without remediation [7]. The research found that terminal PFAS still exceed regulatory limits by 2000-fold decades after aqueous film-forming foam (AFFF) use ceased, with precursors accounting for around half of the extractable organofluorine across years.<h3>Current Detection Methods</h3><h4>EPA Standardized Methods</h4>The Environmental Protection Agency (EPA) has developed several standardized methods for PFAS detection, each with specific applications and capabilities:<h5>EPA Method 533</h5><a target="_blank" rel="noopener noreferrer" href="https://blog.organomation.com/blog/epa-533-drying-down-pfas-samples-after-spe">EPA Method 533</a> focuses on "short chain" PFAS with carbon chain lengths of C4 to C12. Released in December 2019, this method complements Method 537.1 and includes several key features:<ul><li>Uses isotope dilution quantification approach with extracted internal standards, which reduces overall analytical uncertainty</li><li>Employs weak anion exchange solid phase extraction cartridges as opposed to polystyrene divinylbenzene used in 537.1</li><li>Can analyze 25 PFAS compounds, including additional short-chain PFAS that were not apart of Method 537.1</li><li>Allows for longer holding times: 28 days to extraction and 28 days to analyze (compared to 14 days to extraction in Method 537.1)</li><li>Uses ammonium acetate as a preservative (versus Trisma in Method 537.1) [1]</li></ul><h5>EPA Method 537/537.1</h5><a target="_blank" rel="noopener noreferrer" href="https://blog.organomation.com/blog/sample-concentration-epa-method-537-pfas-determination">EPA Method 537 </a>was first published in 2009 for the determination of 14 PFAS in drinking water [6]. It was later updated to Method 537.1 in 2018 (with editorial updates in 2020) to expand its capabilities:<ul><li>Uses<a target="_blank" rel="noopener noreferrer" href="https://www.organomation.com/what-is-solid-phase-extraction-spe"> solid phase extraction (SPE) </a>and<a target="_blank" rel="noopener noreferrer" href="https://www.organomation.com/preparing-samples-for-lc-ms/ms-analysis"> liquid chromatography/tandem mass spectrometry (LC-MS/MS)</a></li><li>Method 537.1 expanded detection to 18 PFAS compounds, including HFPO-DA (one component of GenX technology)</li><li>Utilizes styrene-divinylbenzene (SDVB) media for extraction</li><li>Requires samples to be extracted within 14 days and analyzed within 28 days</li><li>Methanol is used to elute the extracts. This should then be reconstituted with a 96:4 methanol:water mixture [1]</li></ul>Together, Methods 533 and 537.1 can detect a total of 29 unique PFAS compounds in drinking water and are approved for monitoring under the fifth Unregulated Contaminant Monitoring Rule (UCMR 5) and the PFAS National Primary Drinking Water Regulation [1] [3].<h5>EPA Method 1633</h5><a target="_blank" rel="noopener noreferrer" href="https://blog.organomation.com/blog/preparing-diverse-sample-matrices-for-epa-method-1633">EPA Method 1633</a>, released in 2024, represents a significant advancement in PFAS analysis:<ul><li>Developed for the analysis of 40 PFAS compounds in various matrices, including surface water, groundwater, wastewater, soil, biosolids, sediment, landfill leachate, and fish tissue</li><li>Expands beyond the drinking water focus of Methods 533 and 537.1</li><li>Provides a standardized approach that may replace modified drinking water methods (i.e., modified EPA 537) that were previously used for non-drinking water matrices [1]</li></ul><h4>Conventional Analytical Techniques</h4>The gold standard for PFAS analysis involves chromatographic techniques coupled with mass spectrometry:<ul><li>Liquid Chromatography-Tandem Mass Spectrometry (LC-MS/MS) is the most widely used method for PFAS analysis, offering high sensitivity and specificity [1]</li><li>High-Resolution Mass Spectrometry (HRMS) allows for rapid detection and identification of PFAS species at very low concentrations [5]</li></ul>These techniques can detect PFAS at parts per trillion (ppt) levels, which is essential given the low concentrations at which PFAS can cause health effects [1]. However, these methods require sophisticated equipment, specialized training, and significant financial resources, making them inaccessible in many regions, particularly in developing countries.<h4>Emerging Detection Technologies</h4>Several innovative approaches are being developed to address the limitations of conventional methods:<ul><li>Electrochemical biosensors using modified electrodes have shown promise for selective PFAS detection with low detection limits [2]</li><li>Surface-Enhanced Raman Spectroscopy (SERS) uses metallic nanoparticles and can be made into a portable method for on-site testing [1]</li><li>Molecular imprinted polymers (MIPs) offer thermal and physical stability, reusability, and low-cost synthesis for PFAS detection [6]</li></ul>These emerging technologies aim to provide more accessible, field-deployable, and cost-effective alternatives to traditional laboratory-based methods.<h3>Challenges in PFAS Detection</h3><h4>Analytical Challenges</h4>Detecting PFAS presents several technical challenges:<ul><li>The ubiquity of PFAS in laboratory equipment and accessories can lead to background contamination when measuring at parts-per-trillion levels [1]</li><li>Many components in liquid chromatographs, mass spectrometers, and solid-phase extraction systems contain materials that can leach PFAS compounds [9]</li><li>The vast number of PFAS (thousands of compounds) makes comprehensive detection difficult, as analytical standards are only available for a small subset [1]</li><li>Complex matrices like food and environmental samples require sophisticated sample preparation techniques</li></ul><h4>Global Disparities in Detection Capabilities</h4>Access to PFAS detection technology varies significantly worldwide:<ul><li>Many developing regions, particularly in Africa, lack adequately equipped laboratories with the necessary instrumentation to detect and measure PFAS</li><li>There is often a scarcity of qualified professionals with experience in PFAS analysis in these regions</li><li>The high cost of acquiring and maintaining sophisticated analytical instruments presents a substantial obstacle to conducting extensive PFAS investigations in resource-limited settings [1]</li><li>Competing priorities such as infectious diseases, poverty, and food security often divert attention and resources from environmental pollutants like PFAS</li></ul><h4>Regulatory Landscape and Compliance</h4>The regulatory framework for PFAS is evolving rapidly worldwide:<ul><li>The EPA finalized Section 8(a)(7) of the Toxic Substances Control Act in September 2024, requiring manufacturers and importers to report on their use of PFAS since 2011 [10]</li><li>Electronic reporting for PFAS will open on July 11, 2025, with final reporting deadlines in 2026</li><li>Companies must report detailed information including chemical identity, production volumes, industrial and consumer products, worker exposure, and disposal methods [10]</li></ul>These regulations are driving demand for more effective and accessible PFAS detection methods to ensure compliance and protect public health.<h3>Future Directions in PFAS Detection</h3><h4>Technological Advancements</h4>The future of PFAS detection lies in developing more accessible, sensitive, and comprehensive methods:<ul><li>Non-targeted screening methods that can identify unknown PFAS compounds without requiring analytical standards for each specific compound</li><li>Total fluorine analysis techniques like Adsorbable Organic Fluorine and Total Oxidizable Precursor Assay that can quantify the presence of fluorine atoms within a sample [1]</li><li>Portable sensors and field-deployable technologies that enable on-site monitoring and rapid response to contamination events</li><li>AI-driven solutions that can improve data analysis and interpretation for complex PFAS mixtures</li></ul><h4>Collaborative Approaches</h4>Addressing the global challenge of PFAS detection requires coordinated efforts:<ul><li>International partnerships between researchers in developed and developing regions to enhance expertise and capacity building</li><li>Standardization of analytical methods to ensure consistency and comparability of results across different laboratories and regions</li><li>Open data sharing and collaboration across countries to leverage collective knowledge and resources</li><li>Integration of PFAS monitoring into broader environmental and public health surveillance systems</li></ul><h3>Conclusion</h3>The detection of PFAS is not merely a technical challenge but a critical public health and environmental imperative [1]. As these "forever chemicals" continue to persist in our environment, developing effective, accessible, and comprehensive detection methods becomes increasingly important. By advancing detection technologies, strengthening regulatory frameworks, and fostering global collaboration, we can better understand, monitor, and ultimately mitigate the impacts of PFAS contamination.The EPA's standardized methods (533, 537.1, and 1633) provide crucial tools for monitoring PFAS in various environmental matrices, but continued innovation is needed to address the full spectrum of PFAS compounds and to make detection more accessible globally [1] [6]. The path forward requires sustained investment in research and development, capacity building in resource-limited settings, and a commitment to environmental justice that ensures all communities have access to the tools and information needed to protect themselves from PFAS exposure. Only through such comprehensive approaches can we hope to address the complex challenges posed by these persistent pollutants.Be sure to check out our other installments of our&nbsp;<a target="_blank" rel="noopener noreferrer" href="https://blog.organomation.com/blog/introducing-our-environmental-contaminants-series-making-sense-of-the-alphabet-soup">Environmental Contaminant Series</a>&nbsp;covering&nbsp;<a target="_blank" rel="noopener noreferrer" href="https://blog.organomation.com/blog/the-importance-of-detecting-persistent-organic-pollutants-pops">Persistent Organic Pollutants (POPs)</a>,&nbsp;<a target="_blank" rel="noopener noreferrer" href="https://blog.organomation.com/blog/the-importance-of-detecting-polycyclic-aromatic-hydrocarbons-pahs">Polycyclic Aromatic Hydrocarbons (PAHs)</a>,&nbsp;<a target="_blank" rel="noopener noreferrer" href="https://blog.organomation.com/blog/the-importance-of-detecting-semi-volatile-organic-compounds-svocs">Semi-Volatile Organic Compounds (SVOCs)</a>, and <a target="_blank" rel="noopener noreferrer" href="https://blog.organomation.com/blog/the-importance-of-detecting-polychlorinated-biphenyls-pcbs">Polychlorinated Biphenyls (PCBs)</a>.

The Importance of Detecting Per- and Polyfluoroalkyl Substances (PFAS)

Scientists at CEITEC Brno University of Technology have developed microscopic robots that could one day accelerate beer production and simplify food quality control. The magnetically controlled biobots can actively mix liquids during fermentation, speed up the process, and separate themselves from the finished product once fermentation is complete. The results of the research, carried out by Professor Martin Pumera’s team, were published in the journal ACS Nano.“When people hear the word ‘robot’ today, they often imagine an electronic device. In reality, however, a robot can be any system capable of autonomously performing a specific task,” explains Martin Pumera of CEITEC Brno University of Technology.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/CEITEC_Mikroroboti_z_CEITEC_mohou_urychlit_vyrobu_piva_i_kontrolu_kvality_potravin_7d9ff82875.jpeg" alt="CEITEC BUT/Jakub Rozboud: CEITEC Microrobots Could Speed Up Beer Production and Food Quality Control: Martin Pumera in his lab at CEITEC BUT." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_CEITEC_Mikroroboti_z_CEITEC_mohou_urychlit_vyrobu_piva_i_kontrolu_kvality_potravin_7d9ff82875.jpeg 235w," sizes="100vw" width="1600" height="1067">The research team created so-called biobots—biohybrid microrobotic capsules containing brewer’s yeast and magnetic nanoparticles. When the yeast produces carbon dioxide during fermentation, the resulting bubbles cause the biobots to move up and down through the liquid. This naturally mixes the contents of the vessel and makes fermentation more efficient. Compared with conventional static particles, the biobots can therefore accelerate chemical processes that are important in food production.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/CEITEC_Mikroroboti_z_CEITEC_mohou_urychlit_vyrobu_piva_i_kontrolu_kvality_potravin_4_af5fd4611f.jpg" alt="CEITEC BUT/Martin Pumera's archive: CEITEC Microrobots Could Speed Up Beer Production and Food Quality Control: Hematite microrobot (image for illustrative purposes)." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_CEITEC_Mikroroboti_z_CEITEC_mohou_urychlit_vyrobu_piva_i_kontrolu_kvality_potravin_4_af5fd4611f.jpg 209w," sizes="100vw" width="1600" height="1192">Another major advantage of the technology is that the biobots can be easily separated from the finished beverage. Thanks to the magnetic particles they contain, they can be controlled with a magnetic field and removed once fermentation is complete, eliminating the need for additional filtration. The researchers also demonstrated that the biobots can be reused over several production cycles.“Unlike conventional static particles, microrobots actively move throughout the entire volume of the liquid, allowing them to cover a larger area and make the whole process more efficient. At the same time, they also facilitate the automation of production,” adds Martin Pumera. The team is currently discussing potential applications of the technology with a major European brewery.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/CEITEC_Mikroroboti_z_CEITEC_mohou_urychlit_vyrobu_piva_i_kontrolu_kvality_potravin_3_e8e5a3a55a.jpg" alt="CEITEC BUT/Martin Pumera's archive: CEITEC Microrobots Could Speed Up Beer Production and Food Quality Control: g-C₃N₄ microrobots (image for illustrative purposes)." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_CEITEC_Mikroroboti_z_CEITEC_mohou_urychlit_vyrobu_piva_i_kontrolu_kvality_potravin_3_e8e5a3a55a.jpg 158w," sizes="100vw" width="1476" height="1460">Martin Pumera’s group has long been exploring the use of microrobots and advanced materials in the food industry. In the past, for example, the team developed a flexible sensor for smart packaging capable of detecting spoiled fish. The new biobots therefore represent another step towards more advanced methods of food quality and safety control.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/CEITEC_Mikroroboti_z_CEITEC_mohou_urychlit_vyrobu_piva_i_kontrolu_kvality_potravin_2_75c7fed958.jpeg" alt="CEITEC BUT/ACS Nano: CEITEC Microrobots Could Speed Up Beer Production and Food Quality Control: ACS Nano - cover featuring article by Martin Pumera et al." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_CEITEC_Mikroroboti_z_CEITEC_mohou_urychlit_vyrobu_piva_i_kontrolu_kvality_potravin_2_75c7fed958.jpeg 117w," sizes="100vw" width="1600" height="2128">

 CEITEC Microrobots Could Speed Up Beer Production and Food Quality Control 

In this episode of ‪ChromatographyTalk‬, ‪Organomation‬ General Manager David Oliva sits down with Michelle Taylor, Editor-in-Chief of LabCompare, to go behind the scenes of their groundbreaking two-part documentary series on PFAS (per- and polyfluoroalkyl substances).The conversation kicks off with a startling revelation: many of the world’s leading PFAS experts have completely stopped eating seafood due to high contamination levels discovered during testing. From there, we dive deep into the technical and regulatory challenges facing today's analytical laboratories.<h4>In this episode, we discuss:</h4><ul><li>The Laboratory Throughput Crisis: Why labs are currently "overwhelmed with samples" and how tiered testing—using single quad instruments for screening before moving to triple quads—is helping to manage capacity without sacrificing sensitivity.</li><li>The Battle Against Background Contamination: Why PTFE-free (PFAS-free) laboratory equipment is no longer optional when trying to detect "forever chemicals" at the parts-per-trillion and parts-per-quadrillion levels.</li><li>Complex Matrices (Seafood &amp; Packaging): The technical hurdles of analyzing high-lipid samples like fish and the rising demand for migration testing as states like Rhode Island begin to phase out PFAS in food packaging.</li><li>Global Regulatory Shifts: A look at the "dual compliance model" required for labs supporting international exporters, especially with the European Union’s stricter enforcement compared to the U.S. monitoring approach.</li><li>The "Grand Challenge" of Unknowns: How EPA Method 1621 (Total Organic Fluorine) is helping labs close the mass balance gap and why the next generation of bench chemists must embrace *AI and data science* to manage the massive datasets generated by high-resolution mass spectrometry.</li><li>PFAS Destruction vs. Remediation: &nbsp;The promising (and problematic) methods for breaking the carbon-fluorine bond, and why incineration may inadvertently be spreading shorter-chain PFAS into the air.</li></ul>Whether you are a lab manager looking to future-proof your workflow or a chemist navigating the ever-evolving landscape of EPA Method 1633, this episode provides essential insights into the most pressing environmental crisis of our time.<h3>Video Transcription</h3><h4>Michelle Taylor: PFAS Testing Is Becoming a Much Bigger Analytical Challenge</h4>PFAS analysis has rapidly evolved from a specialized environmental testing problem into a much broader challenge involving drinking water, food, packaging, laboratory contamination, international regulation, data analysis, and even destruction technologies. In an interview with Michelle Taylor, Editor-in-Chief of Labcompare, the discussion explored what laboratories are learning from the latest PFAS research—and why the analytical demands are likely to continue growing.Taylor leads editorial content for Labcompare, an online resource covering analytical laboratory instrumentation, products, and scientific developments. Among the projects she considers particularly important are two long-form documentaries produced by Labcompare examining per- and polyfluoroalkyl substances (PFAS), first through drinking water and subsequently through food.The documentaries brought together subject-matter experts working across PFAS analysis and exposed some of the practical realities laboratories now face: rapidly changing regulations, extremely low detection limits, complex matrices, contamination risks, and sample volumes that can overwhelm laboratory capacity.<h4>From drinking water to seafood</h4>One of the most memorable findings for Taylor came during production of the second documentary, which focused on PFAS in food.Several experts interviewed for the project told her they had stopped eating seafood, in some cases many years earlier, because of concerns surrounding contamination. For Taylor, the consistency and immediacy of those responses illustrated how closely analytical research can intersect with everyday decisions.Seafood also demonstrates why PFAS testing can become analytically difficult.Fish and other high-lipid samples require effective extraction to release the analytes, followed by rigorous cleanup to remove fats. According to the experts Taylor interviewed, the cleanup step is particularly critical because residual lipids can damage LC columns and create severe matrix interferences.Laboratories are therefore using approaches such as enhanced matrix removal and carbon- or silica-based sorbents to reduce the lipid content of extracts before instrumental analysis. The goal is not simply obtaining sufficient recovery, but producing an extract clean enough to maintain analytical performance and laboratory throughput.<h4>How laboratories are handling the PFAS sample burden</h4>The analytical sensitivity now required for PFAS testing presents another challenge: laboratories may need to measure compounds at parts-per-trillion levels while processing growing numbers of samples.Automation has therefore become increasingly important, particularly during sample preparation, where repetitive manual procedures can otherwise create a major bottleneck.Taylor also described a tiered analytical strategy being used by some laboratories. A less demanding measurement can first be used for screening, while samples generating a positive result are subsequently transferred to a more sensitive platform, such as triple-quadrupole mass spectrometry, for confirmation and quantitation.This type of workflow can help laboratories concentrate their highest-performance instrumentation on the samples that actually require it rather than applying the most intensive analysis to every incoming sample.The broader principle is likely to become increasingly important as PFAS testing expands: laboratories must find ways to increase throughput without sacrificing the sensitivity demanded by regulatory methods.<h4>When the laboratory itself becomes a source of PFAS</h4>At trace concentrations, contamination introduced during sample preparation or measurement can become comparable to the concentration being determined.This makes the materials used throughout the analytical workflow particularly important.Taylor emphasized that PFAS laboratories must maintain continuous awareness of potential contamination from solvents, water, tubing, containers, and other laboratory components. Equipment containing fluoropolymers such as PTFE may be problematic in certain PFAS workflows because background contamination can contribute to false positives or elevated blanks.As detection limits move lower, dedicated PFAS-compatible or fluoropolymer-free laboratory equipment becomes increasingly valuable.Taylor described manufacturers offering clearly identified PFAS-free configurations as an important response to this problem. Rather than forcing laboratories to investigate the material composition of each component individually, dedicated configurations can simplify method implementation and reduce uncertainty about potential background sources.For laboratories already dealing with demanding workflows and large sample loads, eliminating potential contamination before it occurs can save considerable troubleshooting time.<h4>Food packaging could drive the next major wave of testing</h4>PFAS concerns are not limited to the food itself.The interview also examined food-contact materials, including takeout containers and other packaging from which PFAS may migrate into food. State-level restrictions in the United States are already beginning to affect the materials manufacturers can use.For contract laboratories, this creates the possibility of another significant increase in demand for compliance and migration testing.Taylor’s recommendation is straightforward: laboratories should follow proposed regulations before they become final.Waiting until a new requirement takes effect can leave a laboratory simultaneously trying to acquire instrumentation, establish methods, train staff, and respond to customer demand. Monitoring regulatory agencies, scientific meetings, and industry discussions earlier gives laboratories time to prepare analytical capabilities before the testing requirement becomes urgent.She expects PFAS restrictions in food packaging to continue developing first through a patchwork of individual state regulations. Once a sufficient number of states adopt restrictions, however, the economics may increasingly encourage suppliers to move toward PFAS-free materials regardless of whether every jurisdiction requires them.A national standard could eventually follow that transition.<h4>One sample, two regulatory environments</h4>International food exporters face another complication: PFAS requirements are not necessarily the same between the United States and European Union.Taylor noted that laboratories serving both markets may effectively need to operate under a dual-compliance model.In the interview, she highlighted EU requirements targeting specific PFAS—including PFOS, PFOA, PFNA, and PFHxS—at very low concentrations in certain foods, while the U.S. approach has historically involved a different combination of monitoring programs, evolving compound lists, and import-related requirements.For laboratories supporting international customers, this means more than simply selecting a different reporting limit.Different markets may require different target lists, methods, documentation, auditing, and compliance procedures. Laboratories therefore need analytical platforms capable of ultratrace measurements while also maintaining the operational flexibility to support multiple regulatory frameworks.That additional complexity also carries a practical cost: performing different protocols for different jurisdictions means more staff time, additional workflow management, and potentially greater instrument demand.<h4>Total fluorine screening can help laboratories decide what to analyze next</h4>Targeted LC-MS/MS methods are highly sensitive, but they only measure compounds included in the analytical panel.This creates an important question: what about fluorinated substances that are present but are not included in the targeted method?The interview discussed EPA Method 1621, which uses a broader fluorine-based screening approach. Taylor described this type of measurement as useful for helping laboratories assess the gap between compounds captured by targeted LC-MS/MS methods and the broader amount of organofluorine present in a sample.Such screening can also become part of a tiered workflow.For applications such as food packaging, laboratories could initially use a broader fluorine measurement to determine whether a sample warrants further investigation. Positive or suspicious samples could then move to more selective and sensitive targeted analysis for identification and quantitation.Non-targeted high-resolution mass spectrometry can add another layer by revealing compounds outside conventional target lists.Together, these approaches create a funnel from broad screening toward increasingly detailed characterization rather than attempting the most comprehensive analysis on every sample from the outset.<h4>PFAS analysis is becoming a data problem too</h4>High-resolution mass spectrometry can generate enormous datasets containing signals from large numbers of known and unknown compounds.As a result, Taylor believes the role of the analytical chemist is changing.Strong laboratory skills remain essential, but scientists increasingly need data literacy as well. Understanding complex datasets, working with advanced software, and interacting effectively with artificial intelligence and machine-learning tools are becoming important parts of modern analytical work.Taylor does not see this change primarily as replacing scientific expertise.Instead, she compares it with earlier laboratory automation: repetitive or technically demanding tasks can increasingly be handled by software, allowing scientists to spend more time interpreting results and making decisions.AI may also make sophisticated analytical information more accessible. A less experienced mass spectrometry user could potentially receive explanations of complex data through software capable of presenting results in natural language, reducing dependence on a single specialist being immediately available.There is another potential advantage beyond speed.Machine-learning systems can recognize patterns across large datasets that may be difficult or impossible for an individual scientist to detect manually. As analytical datasets become larger and multidimensional, that pattern-recognition capability could become increasingly valuable.<h4>Finding PFAS is only the first half of the problem</h4>For years, much of the PFAS discussion has focused on answering two questions:<ul><li>Are PFAS present, and how much is there?</li></ul>The next challenge is considerably harder: how do we actually remove or destroy them?Taylor described this as an expanding research field that will increasingly involve analytical laboratories.The strength of the carbon-fluorine bond makes PFAS destruction difficult. Some treatment approaches seek to break this bond and achieve complete defluorination, but incomplete destruction can create another analytical problem.For example, thermal treatment may transform longer-chain PFAS into shorter-chain fluorinated compounds rather than eliminating them completely. Those products may then enter another environmental compartment, including atmospheric emissions.Consequently, laboratories studying PFAS destruction must do more than measure disappearance of the original compound. They also need to determine whether fluorinated transformation products or other byproducts remain.Analytical chemistry therefore has two roles: monitoring PFAS contamination and demonstrating whether remediation technologies truly destroy the substances they are intended to remove.<h4>The PFAS problem is expanding beyond water and food</h4>The first two Labcompare documentaries focused primarily on water and food, two matrices already receiving substantial regulatory and public attention.But Taylor does not expect the story to end there.If Labcompare produces another PFAS documentary, she sees PFAS in air as a likely subject. Discussions with experts during earlier filming repeatedly raised atmospheric contamination, including both direct environmental occurrence and emissions potentially associated with treatment or destruction processes.The progression illustrates how quickly the PFAS field is expanding.Drinking water regulation accelerated analytical development. Food testing introduced more difficult matrices and new exposure pathways. Packaging is creating another compliance challenge. Environmental remediation raises questions about destruction products. Atmospheric monitoring could become another significant frontier.For laboratories already working with chromatography and mass spectrometry, Taylor’s message is essentially to be prepared—even organizations that do not currently consider themselves “PFAS laboratories” may eventually become involved.<h4>An analytical field that is still changing rapidly</h4>Perhaps the strongest theme running through the interview is that PFAS analysis has no fixed endpoint yet.Methods continue to evolve. Regulations change. Target compound lists expand. Instrument sensitivity improves. Laboratories discover new sources of background contamination, while researchers identify additional exposure pathways and investigate new destruction technologies.Taylor compares the situation to earlier periods of rapid analytical development, such as the evolution of forensic DNA analysis: each technological advance reveals more information, which in turn creates new questions and new analytical requirements.That makes preparation particularly important.Laboratories cannot predict every future regulation, but they can follow proposed requirements, develop flexible workflows, invest in contamination control and data capabilities, and understand how their existing chromatography and mass spectrometry expertise could be applied to emerging PFAS challenges.The analytical problem is no longer simply detecting a group of “forever chemicals.”It is becoming a much larger question of how we identify them, quantify them, prevent contamination during analysis, understand their movement through food and the environment, comply with evolving regulations, and ultimately prove that they have actually been destroyed.<blockquote>This text has been automatically transcribed from a video presentation using AI technology. It may contain inaccuracies and is not guaranteed to be 100% correct.</blockquote><blockquote><h4>Concentrating on Chromatography Podcast</h4>Dive into the frontiers of chromatography, mass spectrometry, and sample preparation with host David Oliva. Each episode features candid conversations with leading researchers, industry innovators, and passionate scientists who are shaping the future of analytical chemistry. From decoding PFAS detection challenges to exploring the latest in AI-assisted liquid chromatography, this show uncovers practical workflows, sustainability breakthroughs, and the real-world impact of separation science. Whether you’re a chromatographer, lab professional, or researcher you'll discover inspiring content!You can find Concentrating on Chromatography Podcast in podcast apps:<ul><li><a target="_blank" rel="noopener noreferrer" href="https://open.spotify.com/show/1wZg67rCjoGju4yhqxI3tL">Spotify</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://podcasts.apple.com/tz/podcast/concentrating-on-chromatography/id1788429185">Apple podcast</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://podscan.fm/podcasts/concentrating-on-chromatography">podscan</a></li></ul>and on <a target="_blank" rel="noopener noreferrer" href="https://www.youtube.com/@ChromatographyTalk/videos">YouTube channel</a></blockquote>

PFAS in Water, Food & Packaging: Michelle Taylor on the "Forever Chemicals" Documentary Series

Article

Scientists

Environment

Food

Water

Interview

Science and research

Video

Since its establishment in 2011, CEITEC has quickly developed into a cutting-edge infrastructure for research which performs highly alongside the best institutes in Europe. Among the main priorities of CEITEC are the promotion of a motivating and dynamic international scientific environment, the provision of state-of-the-art research infrastructure, and the policy of open communication and equal opportunities.

CEITEC

Organomation, founded in 1959, designs and manufactures high-quality nitrogen evaporators and extraction systems. Known for innovation and durability, their lab instruments are used globally for efficient sample preparation with strong customer support.

Organomation

Watrex Streamline OLE 200 On-line SPE system

An automatic on-line solid-phase extraction (SPE) and pre-concentration unit with a 10-port selection valve processes up to 7 samples through 7 SPE cartridges. After washing, the eluted components are directed into an HPLC system via a sample valve. 

Automatic on-line SPE/pre-concentration unit equipped with 10 port selection valve for samples and washing solvents, high pressure cartridge selector for 7 cartridges, high pressure pump, and injection valve connected to HPLC instrument.The pump sucks through 10 port selection valve up to 7 samples to 7 SPE cartridges. Then collected components are washed with one or two slushing eluents, and eluted via sample valve into a HPLC system.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Watrex_Streamline_OLE_200_On_line_SPE_system_Principle_of_online_SPE_by_OLE_200_e40db78c8f.jpg" alt="Watrex - Watrex Streamline OLE 200 On-line SPE system - Principle of online SPE by OLE 200"><h3>TECHNICAL SPECIFICATION</h3><ul><li>Cartridge selector: twin 10-port high pressure selector, 40MPa</li><li>Cartridge dimensions: 10x4mm</li><li>Connection to HPLC instrument: Rheodyne 6 port sample valve</li><li>Selector: low-pressure 10-port selection valve IDEX</li><li>Sample load pump: high-pressure single piston ss pump</li><li>Instrument control: driver for all valves and pump controll included</li></ul><h3>Ordering information:</h3><h5>PN/Component:</h5><ul><li>D2K2062401 Watrex OLE200</li></ul>You can also visit this product on the <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/obchod/laboratory-automation/streamline-ole-200/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">Watrex website</a>.

SIELC Alltesta Mini HPLC Autosampler

The Alltesta™ Mini Autosampler is an affordable and dependable solution for automated sample handling in various analytical and liquid handling applications, including HPLC.

The Alltesta™ Mini Autosampler is an affordable and dependable solution for automated sample handling in various analytical and liquid handling applications, including HPLC. With its proprietary alpha/beta mechanical design, this compact autosampler offers direct and comprehensive control of its features, making integration quick and easy. Users can tailor the mini autosampler to their needs with customizable valve configurations, tray designs, and syringe volumes and pressures. Additionally, a built-in shaking feature enables sample mixing before injection and/or simple sample extraction within the vial.
This compact autosampler comes designed with original equipment manufacturer (OEM) customization in mind. Custom shape, color, and communication interfaces can be adapted to integrate with any system. Comprehensive software integration support is provided. Other options include metal-free sampling and reagent addition and mixing capabilities.
<ul>
<li>FRACTION COLLECTION CAPABILITY: A simple software modification can quickly convert this small autosampler into a fraction collector.
</li>
<li>REACTOR PROBE SAMPLER CAPABILITY: A simple software modification can quickly convert this small autosampler into a reactor probe sampler.
</li>
</ul>
This miniature autosampler can also be used as a component of our <a href="https://lcms.labrulez.com/products/1242">Alltesta™ Gradient Automated Analyzer</a> and <a href="https://lcms.labrulez.com/products/1243">Alltesta™ Cromite Analyzer</a>.
<blockquote>
<h4>The price of the Alltesta™ Mini Autosampler varies depending on the specific configuration requested.</h4>
</blockquote>
<h4>Specifications</h4>
<ul>
<li>Dimensions (WHL): 160 x 145 x 195 mm / 6.3 x 5.71 x 7.68 in</li>
<li>Weight: 3 kg / 6.6 lb</li>
<li>Power: 24 V</li>
<li>Capacity: 48 vials or 96-well plate</li>
<li>Pressure: 5000 psi</li>
<li>Needle Wash: Inside and outside</li>
<li>Syringe Capacity: 120µL high-pressure / 4000µL low-pressure stainless / 4000µL low-pressure ceramic</li>
<li>Valve options: 6×2, 7×6 and 10×9 (more details here).</li>
<li>Volume Accuracy: 0.1µL</li>
<li>Communication: RS232 Virtual COM port via USB</li>
</ul>
<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/SIELC_Alltesta_Mini_Autosampler_A_very_simple_schematic_operation_of_the_Alltesta_Autosampler_b79b0ad187.jpg" alt="SIELC: Alltesta™ Mini Autosampler - A very simple schematic operation of the Alltesta™ Autosampler."/>
<h4>Software</h4>
The Alltesta™ Autosampler can be controlled:
<ul>
<li>directly via serial commands (Alltesta™ protocol available upon request, please contact us at support@sielc.com),</li>
<li>directly via our demo software, allowing to learn the whole functionality of the unit (<a href="https://sielc.com/wp-content/uploads/2022/12/Alltesta_Autosampler_Control_Windows_10.zip">Windows 10, 32/64bit</a>, 5Mb; <a href="https://sielc.com/wp-content/uploads/2022/12/Alltesta_Autosampler_Control_Windows_7.zip">Windows 7, 32/64bit</a>, 126Mb).</li>
<li>remotely through our cloud software (as a part of Alltesta™ Analyzer or Alltesta™ Mini Analyzer),</li>
</ul>
Serial communication drivers are available <a href="https://ftdichip.com/drivers/vcp-drivers/">here</a>.

SIELC Alltesta™ Mini LHS (Liquid Handling Station)

The Alltesta™ Mini Liquid Handling Station serves as an affordable, reliable solution for automated sample handling.

The Alltesta™ Mini Liquid Handling Station serves as an affordable, reliable solution for automated sample handling. With its compact design, proprietary alpha/beta mechanical structure, and adjustable operation speeds, it offers comprehensive control for quick and seamless integration with other equipment. The station comes equipped with a built-in sample shaking feature for in-vial sample mixing and extraction, and a needle washing station capable of accommodating up to four solvents.
Designed with Original Equipment Manufacturer (OEM) customization in mind, the Alltesta™ Mini Liquid Handling Station can be tailored to fit any system’s requirements. Custom needle lengths and trays enable the device to accommodate various types of vials. An array of integrated valves and a measuring syringe can be added to the device. Additional customization options, such as metal-free flow paths and customer-specified enclosure colors, are also available.
Comprehensive software integration support is provided to ensure smooth operation and functionality.
<h4>Specifications</h4>
<ul>
<li>Dimensions (WHL): 160 x 145 x 195 mm / 6.3 x 5.71 x 7.68 in</li>
<li>Weight: 2.25 kg / 5 lb</li>
<li>Power: 24 V</li>
<li>Capacity: 48-vial tray or 96-well plate</li>
<li>Needle Wash: Inside and Outside</li>
<li>Communication: RS232 Virtual COM port via USB</li>
</ul>
<h4>Software</h4>
The Alltesta™ LHS can be fully controlled via serial commands. Alltesta™ protocol available upon request, please contact us at support@sielc.com. Serial communication drivers are available <a href="https://ftdichip.com/drivers/vcp-drivers/">here</a>.

Watrex xTrovert FLEX-O automation SPE sample preparation system

FLEX-O robotic system enabling automation sample preparation on solid phase using 96-titre plates.

FLEX-O robotic system enabling automation sample preparation on solid phase using 96-titre plates. Although there are solutions for automatic SPE on classic column formats, robotic system for automation in 96-well SPE plates is not currently on the market.In addition to the 8-channel pipetting head, the robot is equipped with a gripper and a filling dispenser, which applies wash solutions to the SPE positions on the plate. Instead of filtering using classic vacuum pump, which is used for manual SPE on columns or 96plates, the <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/obchod/laboratory-automation/xtrovert-flex-o/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">xTrovert FLEX-O</a> system uses the so-called positive pressure technology when it is the reagent is pushed through the SPE membrane with a multi-channel pressure attachment. That’s it ensuring flow uniformity and reproducibility between individual samples on the plate.The robot is capable of processing up to 4 x 96-well sample plates (384 of total samples) using a protocol with up to 8 different washing and extraction reagents.The system is compatible with the Waters OligoWorks™ SPE Macroplate (96-well), Waters Oasis™ PRiME HLB, Macherey-Nagel™ SPE MULTI 96-Monoblock CHROMABOND™ and other 96-plate format SPE systems.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_x_Trovert_FLEX_O_automation_SPE_sample_preparation_system_ec3768960e.jpg" alt="Watrex xTrovert FLEX-O automation SPE sample preparation system.jpg" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Watrex_x_Trovert_FLEX_O_automation_SPE_sample_preparation_system_ec3768960e.jpg 208w," sizes="100vw" width="1433" height="1075">If necessary, the user can make modifications to the log using a simple scripting language and subsequent wireless upload to the device. Userthe interface for controlling the system is based on the integrated computer Raspberry Pi ® s 800×480 RGB LCD multi-touch touch screen and the possibility of remote wifi accessfrom an external device (e.g. mobile phone or tablet).<h4>Application</h4><ul><li>Purification of oligonucleotide synthesis products</li><li>Organic Synthesis</li><li>Environmental Analysis</li><li>Medical diagnostics</li><li>Molecular biology and biochemistry</li></ul>The entire system was designed and developed by Watrex Praha and is manufactured in the Czech Republic and promises a shift in the performance and efficiency of laboratory processes worldwide!

SIELC Samplify Automated sampling system

Samplify Is a device which allows unattended sampling of a reaction mixture or bioprocess or continue in line flow by taking small amount of liquid from the monitoring mixture and collecting it in a vial or a 96 wells plate

Samplify™ Is a device which allows unattended sampling of a reaction mixture or bioprocess or continue in line flow by taking small amount of liquid from the monitoring mixture and collecting it in a vial or a 96 wells plate. It also allows to dilute the sample with assigned dilution ratio and can provide reaction quenching to preserve the sample state at time of sampling. It has two main components: an autosampler and a probe. The Samplify™ &nbsp;controlled and setup by a PC software.<h3>Description</h3>It is a common task in the lab to periodically sample a reactor or a fermenter to obtain information about reaction kinetic, completion and have a tangible representation of intermediate states of a dynamic process. This usually done manually with pipettes or syringes, using stopwatch to measure time and requires to be in the lab during the entire process.With Samplify it can be done in automated mode. When an automated sampling process is used it increases accuracy, safety, and productivity. It reduces potential samples cross contamination, and exposure of the reaction mixture to oxygen or moisture, when anaerobic or moisture free conditions are required.<ul><li>Based on a proprietary alpha/beta mechanical configuration, Alltesta Miniature Autosampler and patent pending sample probe offers affordable and reliable automation for many analytical and liquid-handling applications.&nbsp;</li><li>Small controllable volume of sample can be programmed and precisely removed from the enclosed or open system. The sample will then be transferred to a vial with inert solvent with measured volume to create a controllable dilution factor.</li><li>A quench solution can be automatically preloaded in each vial to provide termination of reaction or biological process, and preserve sample content in the time of probing.</li><li>In order to effectively mix samples with diluents or quenching reagents a shaking capability of the autosampler tray can be initiated after each sample cycle.</li><li>PC based software allows quick, but flexible, setup of the sampling experiment. Several preloaded methods can be quickly adapted to a particular needs of the user.</li><li>For temperature sensitive samples the entire autosampler can be placed in the temperature controlled environment.</li><li>The device small size allow to place it close to the reactor and use short connection lines to minimize dispersion. Also a small cooler can be used to keep samples in cold conditions after they are collected.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/SIELC_SIELC_Samplify_Automated_sampling_system_937b70e8d2.jpg" alt="SIELC: SIELC Samplify™ Automated sampling system." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_SIELC_SIELC_Samplify_Automated_sampling_system_937b70e8d2.jpg 245w," sizes="100vw" width="1346" height="663"><h3>Specifications</h3><h4>Samplify™ Autosampler:</h4><ul><li>Syringe volume: 4.0 mL</li><li>Pressure: up to 250 psi</li><li>Valve configuration: 7×6</li><li>Power Requirements: 24 VDC</li><li>Current Requirements: Up to 1.0 A</li><li>Dimensions (WHL): 160 x 145 x 195 mm / 6.3 x 5.71 x 7.68 in</li><li>Weight: &nbsp;3 kg / 6.6 lb</li><li>Inlets/Outlets: Thread 10-32 UNF compression type</li><li>Materials in contact with liquid: SS316, PTFE, PEEK</li><li>Tray capacity: 48 vials 1.8 mL volume or 96 wells plate</li><li>Communication: USB virtual serial port</li></ul><h4>Samplify™ Probe:</h4><ul><li>Connection: requires Alltesta-Samplify autosampler</li><li>Dimensions: 1 x 1 inch, DIA ¼ inch. Immersion length up to 6 inch</li><li>Materials in contact with liquid: Stainless Steel 316 (316L), PEEK &amp; PTFE</li><li>Variable sample volume: from 5 to 500 µL</li><li>Max. working pressure: 120 psi (8 bar)</li><li>Max. working temperature: &nbsp;200 °C</li></ul><h3>Software</h3>The Samplify can be controlled:<ul><li>directly through your software via serial commands (Alltesta™ protocol available upon request, please contact us at support@sielc.com),</li><li>remotely through our cloud software (autosampler.cloud),</li><li>directly via our Samplify PC software, allowing to fully control all the parameters of the sampling operations</li></ul><h3>Available Custom Options</h3>Metal-free version of the syringe pump includes no metal contact pump head.

PBI Barocycler 2320EXT Sample Preparation System

The Barocycler 2320EXT is a compact, bench top instrument that can process up to 16 samples simultaneously using PCT MicroTubes.

<h4>For the PCT-HD Sample Preparation System</h4>Pressure Cycling Technology (PCT) is a unique, patented technology platform based on repeated cycles of hydrostatic pressure between ambient (14.7 psi) and ultra-high levels. These rapid changes in pressure are used to control biomolecular interactions for applications such as accelerated proteolytic digestion, and improved extraction of cellular components, including proteins and lipids. The PCT platform allows for a high degree of safety, speed, reproducibility, and convenience in modern sample preparation protocols.The PCT-HD Sample Preparation System is a proven PCT-based workflow for processing small tissue samples for proteomic and other applications. PCT-HD combines efficient, hands-off tissue homogenization and protein extraction with pressure-enhanced digestion, for rapid, efficient and reproducible generation of peptides for MS analysis. This unique workflow combines two of PBI’s innovative sample preparation tools: the Barocycler 2320EXT and our patentpending PCT MicroPestles. PCT-HD and the Barocycler 2320EXT can provide unprecedented speed and reproducibility for biomarker discovery, yielding peptides ready for clean-up and MS within 2-4 hours from the start of tissue processing.The Barocycler 2320EXT is a compact, bench top instrument that can process up to 16 samples simultaneously using PCT MicroTubes. Features that come standard with the 2320EXT include: data input and output options to accommodate validation and quality control; computer-operated control with touch screen programming and automatic data logging; and the ability to control multiple pressure cycling parameters, such as the rate of pressure increase/decrease, both the high and low pressure levels, and the shape of the pressure profile (e.g., sine wave, square wave, and others). In addition, the 2320EXT is available with a choice of two different methods for temperature control (an external circulating waterbath for heating and cooling, or a built-in electric heater).<blockquote>Patent Pending</blockquote><h4>The Barocycler 2320EXT</h4><ul><li>Computer-operated control with Touch Screen Interface</li><li>Pressure Range: ambient - 45,000psi (310 MPa)</li><li>Choice of temperature control - heating/cooling or heating only</li><li>Max Temperature: 95˚C</li><li>Min Temperature: 4˚C with circulating waterbath, ambient with electric heating</li><li>Insulated closure for easier use at high temperatures</li><li>Chamber capacity: up to 16 samples in MicroTubes</li><li>Easily accessible USB port on front panel</li><li>Requires 110psi input air pressure</li><li>Input air pressure can be provided by an air compressor, house air or nitrogen lines, air or nitrogen tanks.</li><li>Pressure medium: Distilled Water</li></ul><h4>Touch Screen Interface</h4>Pressure Profiles are programmed via an onboard touch screen, which can be connected to a network. The instrument is also equipped with a USB port that can be used to connect a mouse or keyboard to the 2320EXT.<ul><li>Pressure Mode Settings: Barocycler, Ramp, Waveform</li><li>Cycled or Static Pressure</li><li>Network Enabled</li><li>Automatic Logging of All Run Parameters</li><li>Data Output&nbsp;</li><li>Save and Record Programs</li><li>Real-time pressure display graph shows pressure and temperature throughout the run</li><li>Touch Screen Temperature Control (with electric heating option only)</li></ul><h4>MicroTubes and MicroPestles</h4>The 2320EXT comes with a full MicroTube Adapter Kit, that includes the MicroTube Cartridges, Capper Tool, and other accessories that are required when using PCT MicroTubes in the 2320EXT. PCT μPestles, used in conjunction with PCT MicroTubes in the Barocycler, are designed for rapid, hands-off homogenization and extraction when working with minute amounts of solid tissue. PCT MicroTubes and MicroPestles are an integral part of the PCT-HD workflow.<ul><li>Process up to 3mg of solid tissue in 30uL of extraction reagent</li><li>Process as few as 5 x 104 cells</li><li>MicroTubes are constructed of non-wetting, low binding FEP plastic</li><li>MicroPestles are made from inert PTFE (Teflon)</li></ul>

Organomation 12 Position N-EVAP Nitrogen Evaporator

The 12 position N-EVAP nitrogen evaporator is a compact unit that allows for up to 12 samples to be evaporated simultaneously.  At each individual sample position, the gas flow can be controlled via a precision needle valve.

The 12 position N-EVAP nitrogen evaporator (cat# 11155) is a compact unit that allows for up to 12 samples to be evaporated simultaneously. At each individual sample position, the gas flow can be controlled via a precision needle valve. This is ideal for the simultaneous evaporation of samples with varying evaporation end points. The sample tray has a spring tensioner which allows any test tube between 10-30 mm to be processed without any modifications to the instrument. An optional small sample holder allows samples with an outside diameter of 5-16 mm to be processed.First introduced in 1959 as The Meyer N-EVAP, the 12 position N-EVAP (cat# 11155) was the first nitrogen dryer created by Organomation. It has proven to be an extremely durable, time tested and highly affordable member of Organomation’s N-EVAP line. These economical units provide controlled concentration of sample vials through the application of nitrogen gas within a heated water bath. The N-EVAP’s circular rotating design permits each sample to be accessible from the front of the instrument for easy insertion and retrieval. The chrome plated needle valves are individually milled from solid brass, enabling precise, uniform adjustments for your nitrogen blow down. This promotes efficient and safe sample reduction with minimal nitrogen waste.<ul><li>Small Footprint: N-EVAP Model 111 requires under one square foot of bench space</li><li>Flexible: An adjustable sample holder design fits a wide variety of sample tubes and vials at once</li><li>Customizable: Options are available for use with acidic or flammable solvents, heat- or water-sensitive samples, and more</li><li>Individualized Control: Optimize evaporation of diverse samples with individual gas flow control at each vial</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Organomation_12_Position_N_EVAP_Nitrogen_Evaporator_5_339151fb9f.jpg" alt="Organomation 12 Position N-EVAP Nitrogen Evaporator ." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Organomation_12_Position_N_EVAP_Nitrogen_Evaporator_5_339151fb9f.jpg 156w," sizes="100vw" width="1400" height="1400"><h3>STANDARD FEATURES</h3><ul><li>Nitrogen filter</li><li>Adjustable flow meter, 0-10 LPM</li><li>High pressure phthalate free tubing for safety</li><li>High temperature limit switch for safety</li><li>Dual band spring hoist assembly (except in dry bath model)</li><li>Precision needle valve tube assembly</li><li>Needles, 4 inch x 19 gauge with chrome plated brass hub and stainless steel shaft</li></ul><h3>OPTIONS&nbsp;</h3><ul><li>220v wiring harness (Option Code# -2), Cat# 11155-2</li><li>Z-Purge/positive pressure purge case (Option Code# -Z), Cat# 11155-Z</li><li>Acid resistant coating on instrument and needles (Option Code# -RT), Cat# 11155-RT</li></ul><h3>SPECS</h3><h4>12p N-EVAP (Water Bath)</h4><ul><li>Bath Type: Water</li><li>Instrumental Catalog Number: 11155</li><li>Number of Sample Positions: 12</li><li>Overall Dimension (w x d x h): 13 x 11 x 31 in / 33 x 28 x 79 cm</li><li>Sample Holder Layout: Circular</li><li>Gas Manifold Layout: Single Ring</li><li>Test Tube Range (Standard Sample Holder): 10–30 mm OD</li><li>Test Tube Range (Optional Sample Holder): 5–16 mm OD</li><li>Gas Flow Meter: 0–10 L/min</li><li>Stainless Steel Needles (Length × Gauge): 4.0 in × 19 ga / 102 mm × 19 ga</li><li>Sample Tray Lift Mechanism: Dual Band Spring Hoist Assembly</li><li>Rotating, Leak Tight Gas Fitting: Standard</li><li>Standard Gas Input Range: 20–30 psig</li><li>Optional Gas Input Range with Optional Pressure Reducing Regulator: 30–160 psig</li><li>Acid Resistant Coating (Option Code -RT): Optional</li></ul><h5>Heating Device Specs</h5><ul><li>Model Number: 5585</li><li>Heating Medium: Water</li><li>Inside Dimensions (Diameter × Depth): 8.5 × 4.5 in / 21.6 × 11.4 cm</li><li>Outside Dimensions (w × d × h): 13 × 11 × 7 in / 33 × 28 × 18 cm</li><li>Total Wattage: 550 W</li><li>Bath Temperature Range: 30–90 °C</li><li>Temperature Controller Type: Mechanical Thermostat</li><li>Controller Accuracy: ± 2 °C</li></ul><h4>12p N-EVAP (Dry Bath)</h4><ul><li>Bath Type: Dry</li><li>Instrumental Catalog Number: 11155-DA</li><li>Number of Sample Positions: 12</li><li>Overall Dimension (w x d x h): 13 x 11 x 27.5 in / 33 x 28 x 70 cm</li><li>Sample Holder Layout: Circular</li><li>Gas Manifold Layout: Single Ring</li><li>Test Tube Range (Standard Sample Holder): 10–30 mm OD</li><li>Test Tube Range (Optional Sample Holder): 5–16 mm OD</li><li>Gas Flow Meter: 0–10 L/min</li><li>Stainless Steel Needles (Length × Gauge): 4.0 in × 19 ga / 102 mm × 19 ga</li><li>Sample Tray Lift Mechanism: None/Fixed</li><li>Rotating, Leak Tight Gas Fitting: N/A</li><li>Standard Gas Input Range: 20–30 psig</li><li>Optional Gas Input Range with Optional Pressure Reducing Regulator: 30–160 psig</li><li>Acid Resistant Coating (Option Code -RT): Optional</li></ul><h5>Heating Device Specs</h5><ul><li>Model Number: 5085</li><li>Heating Medium: Aluminum Beads (Glass Beads in RT Models)</li><li>Inside Dimensions (Diameter × Depth): 8.5 × 4.5 in / 21.6 × 11.4 cm</li><li>Outside Dimensions (w × d × h): 13 × 11 × 7 in / 33 × 28 × 18 cm</li><li>Total Wattage: 500 W</li><li>Bath Temperature Range: 40–130 °C</li><li>Temperature Controller Type: Mechanical Thermostat</li><li>Controller Accuracy: ± 2 °C</li></ul><h4>12p N-EVAP (No Bath)</h4><ul><li>Bath Type: None</li><li>Instrumental Catalog Number: 11155-O</li><li>Number of Sample Positions: 12</li><li>Overall Dimension (w x d x h): 12 × 8 × 31 in / 33 × 28 × 79 cm</li><li>Sample Holder Layout: Circular</li><li>Gas Manifold Layout: Single Ring</li><li>Test Tube Range (Standard Sample Holder): 10–30 mm OD</li><li>Test Tube Range (Optional Sample Holder): 5–16 mm OD</li><li>Gas Flow Meter: 0–10 L/min</li><li>Stainless Steel Needles (Length × Gauge): 4.0 in × 19 ga / 102 mm × 19 ga</li><li>Sample Tray Lift Mechanism: Dual Band Spring Hoist Assembly</li><li>Rotating, Leak Tight Gas Fitting: Standard</li><li>Standard Gas Input Range: 20–30 psig</li><li>Optional Gas Input Range with Optional Pressure Reducing Regulator: 30–160 psig</li><li>Acid Resistant Coating (Option Code -RT): Optional</li></ul><h3>MODELS</h3><h5>Catalog Number &nbsp;/&nbsp;&nbsp;&nbsp;Bath Type</h5><ul><li>11155: Water Bath</li><li>11155-NT: No Teflon, Water Bath*</li><li>11155-DA: Dry Bath</li><li>11155-O: No Bath</li></ul>* No Teflon (-NT) units designed for PFAS analysis using EPA methods 533, 537 and 537.1. **All “-O” models come with a base and stand assembly instead of a heated bath. These instruments are designed for evaporation procedures performed at ambient temperature.<h3>ACCESSORIES</h3><ul><li>Small vessel sample holder, for vial outside diameters of 5-16 mm (cat# NA1132)</li><li>Nitrogen generator (cat# NA1955)</li><li>Pasteur pipette adapters (cat# NA0636)</li><li>Pressure reducing regulator 0-160 psi (cat# NA0630)</li><li>High temperature silicone fluid (cat# NA1240)</li><li>Various needle sizes and gauges</li></ul><h3>REPLACEMENT PARTS</h3><ul><li>P0627: Valve Tube Assembly – Post 1997</li><li>P0607: Luer &amp; washer for N-EVAP valve tube</li><li>P0634: Tube Fitting nylon 3 part for N-EVAP valve tube</li></ul>

Organomation 24 Position N-EVAP Nitrogen Evaporator

The 24 position N-EVAP is our most adaptable benchtop evaporator. The basic model offers all of the standard features from our N-EVAP line. Additionally, the 24 position N-EVAP offers the most customizable options for your sample preparation needs. 

The 24 position N-EVAP is our most adaptable benchtop evaporator. The basic model offers all of the standard features from our N-EVAP line. Additionally, the 24 position N-EVAP offers the most customizable options for your sample preparation needs. The standard sample holder can accommodate samples with an outside diameter of 10-30 mm. However, with the optional 8 position large sample holder, vials with an outside diameter of 30-70 mm can be processed. The 24 position N-EVAP test tube evaporator can also be upgraded to include digital controls for heat and time with the addition of the side control box (Option code -CB).These economical units provide controlled concentration of sample vials through the application of nitrogen gas within a heated water bath. The dual band spring hoist assembly provides a simple and effective means of removing samples from the heated water bath. The N-EVAP’s circular rotating design permits each sample to be accessible from the front of the instrument for easy insertion and retrieval. The chrome plated needle valves are individually milled from solid brass, enabling precise, uniform adjustments for your nitrogen blow down. This promotes efficient and safe sample reduction with minimal nitrogen waste. Time tested technology and proven construction ensure a long lasting, user-friendly experience.<ul><li>Gentle: N-EVAP nitrogen evaporators combine nitrogen blow down with a heated bath to gently concentrate delicate samples</li><li>Flexible: An adjustable sample holder design fits a wide variety of sample tubes and vials at once</li><li>Customizable: A large sample holder option can be added to accommodate vials with a larger outside diameter up to 70 mm</li><li>Individualized Control: Optimize evaporation of diverse samples with individual gas flow control at each vial</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Organomation_24_Position_N_EVAP_Nitrogen_Evaporator_2_18a854b63f.jpg" alt="Organomation 24 Position N-EVAP Nitrogen Evaporator ." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Organomation_24_Position_N_EVAP_Nitrogen_Evaporator_2_18a854b63f.jpg 156w," sizes="100vw" width="1400" height="1400"><h3>STANDARD FEATURES</h3><ul><li>Nitrogen filter</li><li>Adjustable flow meter, 0-20 LPM</li><li>High pressure phthalate free tubing for safety</li><li>High temperature limit switch for safety</li><li>Dual band spring hoist assembly (except in dry bath model)</li><li>Precision needle valve tube assembly</li><li>Needles, 4 inch x 19 gauge with chrome plated brass hub and stainless steel shaft</li></ul><h3>OPTIONS&nbsp;</h3><ul><li>220v wiring harness (Option Code# -2), Cat# 11250-2</li><li>Z-Purge/positive pressure purge case (Option Code# -Z), Cat# 11250-Z</li><li>Acid resistant coating on instrument and needles (Option Code# -RT), Cat# 11250-RT</li><li>Side control box with built-in digital controller, timer, and pressure regulator (Option Code -CB), Cat# 11250-CB</li></ul><h3>SPECS</h3><h4>24 Position N-EVAP (Water Bath)</h4><ul><li>Bath Type: Water</li><li>Instrumental Catalog Number: 11250</li><li>Number of Sample Positions: 24</li><li>Overall Dimension (w × d × h): 16 × 15 × 33 in / 41 × 38 × 84 cm</li><li>Sample Holder Layout: Circular</li><li>Gas Manifold Layout: Single Ring</li><li>Test Tube Range (Standard Sample Holder): 10–30 mm OD</li><li>Test Tube Range (Optional Sample Holder): 30–70 mm OD</li><li>Gas Flow Meter: 0–20 L/min</li><li>Stainless Steel Needles (Length × Gauge): 4.0 in × 19 ga / 102 mm × 19 ga</li><li>Sample Tray Lift Mechanism: Dual Band Spring Hoist Assembly</li><li>Rotating, Leak Tight Gas Fitting: Standard</li><li>Standard Gas Input Range: 20–30 psig</li><li>Gas Input Range with Optional Pressure Reducing Regulator: 30–160 psig</li><li>Acid Resistant Coating: Optional</li></ul><h5>Heating Device Specs</h5><ul><li>Model Number: 9125</li><li>Heating Medium: Water</li><li>Inside Dimensions (Diameter × Depth): 12.0 × 4.5 in / 30.5 × 11.4 cm</li><li>Outside Dimensions (w × d × h): 16 × 15 × 7 in / 41 × 38 × 18 cm</li><li>Total Wattage: 900 W</li><li>Bath Temperature Range: 30–90 °C</li><li>Temperature Controller Type: Mechanical Thermostat</li><li>Controller Accuracy: ±2 °C</li></ul><h4>24 Position N-EVAP (Dry Bath)</h4><ul><li>Bath Type: Dry</li><li>Instrumental Catalog Number: 11250-DA</li><li>Number of Sample Positions: 24</li><li>Overall Dimension (w × d × h): 16 × 15 × 27.5 in / 41 × 38 × 70 cm</li><li>Sample Holder Layout: Circular</li><li>Gas Manifold Layout: Single Ring</li><li>Test Tube Range (Standard Sample Holder): 10–30 mm OD</li><li>Test Tube Range (Optional Sample Holder): 30–70 mm OD</li><li>Gas Flow Meter: 0–20 L/min</li><li>Stainless Steel Needles (Length × Gauge): 4.0 in × 19 ga / 102 mm × 19 ga</li><li>Sample Tray Lift Mechanism: None/Fixed</li><li>Rotating, Leak Tight Gas Fitting: N/A</li><li>Standard Gas Input Range: 20–30 psig</li><li>Gas Input Range with Optional Pressure Reducing Regulator: 30–160 psig</li><li>Acid Resistant Coating: Optional</li></ul><h5>Heating Device Specs</h5><ul><li>Model Number: 5125</li><li>Heating Medium: Aluminum Beads (Glass Beads in RT Models)</li><li>Inside Dimensions (Diameter × Depth): 12.0 × 4.5 in / 30.5 × 11.4 cm</li><li>Outside Dimensions (w × d × h): 16 × 15 × 7 in / 41 × 38 × 18 cm</li><li>Total Wattage: 540 W</li><li>Bath Temperature Range: 40–130 °C</li><li>Temperature Controller Type: Mechanical Thermostat</li><li>Controller Accuracy: ±2 °C</li></ul><h4>24 Position N-EVAP (No Bath)</h4><ul><li>Bath Type: None</li><li>Instrumental Catalog Number: 11250-O</li><li>Number of Sample Positions: 24</li><li>Overall Dimension (w × d × h): 16 × 15 × 31.75 in / 41 × 38 × 81 cm</li><li>Sample Holder Layout: Circular</li><li>Gas Manifold Layout: Single Ring</li><li>Test Tube Range (Standard Sample Holder): 10–30 mm OD</li><li>Test Tube Range (Optional Sample Holder): 30–70 mm OD</li><li>Gas Flow Meter: 0–20 L/min</li><li>Stainless Steel Needles (Length × Gauge): 4.0 in × 19 ga / 102 mm × 19 ga</li><li>Sample Tray Lift Mechanism: Dual Band Spring Hoist Assembly</li><li>Rotating, Leak Tight Gas Fitting: Standard</li><li>Standard Gas Input Range: 20–30 psig</li><li>Gas Input Range with Optional Pressure Reducing Regulator: 30–160 psig</li><li>Acid Resistant Coating: Optional</li></ul><h3>MODELS</h3><h5>Catalog Number &nbsp;/&nbsp;&nbsp;&nbsp;Bath Type</h5><ul><li>11250: Water Bath</li><li>11250-NT: No Teflon, Water Bath*</li><li>11250-DA: Dry Bath</li><li>11250-O: No Bath**</li></ul>* No Teflon (-NT) units designed for PFAS analysis using EPA methods 533, 537 and 537.1. **All “-O” models come with a base and stand assembly instead of a heated bath. These instruments are designed for evaporation procedures performed at ambient temperature.<h3>ACCESSORIES</h3><ul><li>Large vessel sample holder, 8 positions, for vial outside diameters of 30-70 mm (cat# NA1228)</li><li>Nitrogen generator (cat# NA1955)</li><li>Pasteur pipette adapters (cat# NA0636)</li><li>Pressure reducing regulator 0-160 psi (cat# NA0630)</li><li>High temperature silicone fluid (cat# NA1240)</li><li>Various needle sizes and gauges</li></ul><h3>REPLACEMENT PARTS</h3><ul><li>P0627: Valve Tube Assembly – Post 1997</li><li>P0607: Luer &amp; washer for N-EVAP valve tube</li><li>P0634: Tube Fitting nylon 3 part for N-EVAP valve tube</li></ul>

Organomation 34 Position N-EVAP Nitrogen Evaporator

Our 34-position nitrogen evaporator (cat# 11634) offers a large number of sample positions, without compromising any of the classic N-EVAP features. 

Our 34-position nitrogen evaporator (cat# 11634) offers a large number of sample positions, without compromising any of the classic N-EVAP features. This time-tested, durable system provides one of the least expensive prices per position of all our N-EVAPs. The evaporative system, along with the standard flow control and pressure reducing regulator, enables the operator to achieve the desired level of concentration with efficient nitrogen usage. Our unique dual band spring hoist assembly ensures easy and effective operator use.Additionally, the 34 position N-EVAP includes a side control box, which provides timed and digitally controlled water bath temperatures to produce even evaporation rates. The pressure regulator and timer combine to allow timed automatic gas flow cut off which slows evaporation to a minimum once the timed cycle has been completed. In order to prevent damage to delicate samples, the timer also provides the option for the heat to shut off once the cycle is complete.<ul><li>Gentle: N-EVAP nitrogen evaporators combine nitrogen blow down with a heated bath to gently concentrate delicate samples</li><li>Flexible: An adjustable sample holder design fits a wide variety of sample tubes and vials at once</li><li>Precise: Digital controls allow exact temperature regulation</li><li>Individualized Control: Optimize evaporation of diverse samples with individual gas flow control at each vial</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Organomation_34_Position_N_EVAP_Nitrogen_Evaporator_3_04176ee4e2.jpg" alt="Organomation 34 Position N-EVAP Nitrogen Evaporator." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Organomation_34_Position_N_EVAP_Nitrogen_Evaporator_3_04176ee4e2.jpg 156w," sizes="100vw" width="1400" height="1400"><h3>STANDARD FEATURES</h3><ul><li>Nitrogen filter</li><li>Adjustable flow meter, 0-30 LPM</li><li>Built-in pressure reducing regulator</li><li>Side control box</li><li>Digital temperature controller</li><li>Electronic timer</li><li>Safety control cover plate</li><li>High pressure phthalate free tubing&nbsp;</li><li>High temperature limit switch for safety</li><li>Dual band spring hoist assembly&nbsp;</li><li>Precision needle valve tube assembly</li><li>Needles, 4 inch x 19 gauge with chrome plated brass hub and stainless steel shaft</li></ul><h3>OPTIONS&nbsp;</h3><ul><li>220v wiring harness (Option Code# -2), Cat# 111634-2</li><li>Z-Purge/positive pressure purge case (Option Code# -Z), Cat# 11634-Z</li><li>Acid resistant coating on instrument and needles (Option Code# -RT), Cat# 11634-RT</li></ul><h3>SPECS</h3><h4>34 Position N-EVAP (Water Bath)</h4><ul><li>Bath Type: Water</li><li>Instrumental Catalog Number: 11634</li><li>Number of Sample Positions: 34</li><li>Overall Dimension (w × d × h): 24 × 19 × 34 in / 61 × 48 × 86 cm</li><li>Sample Holder Layout: Circular</li><li>Gas Manifold Layout: Single Ring</li><li>Test Tube Range (Standard Sample Holder): 10–30 mm OD</li><li>Gas Flow Meter: 0–30 L/min</li><li>Stainless Steel Needles (Length × Gauge): 4.0 in × 19 ga / 102 mm × 19 ga</li><li>Built-in Nitrogen Gauge Input: 30–110 psig</li><li>Sample Tray Lift Mechanism: Dual Band Spring Hoist Assembly</li><li>Rotating, Leak Tight Gas Fitting: Standard</li><li>Acid Resistant Coating: Optional</li></ul><h5>Heating Device Specs</h5><ul><li>Model Number: 13165</li><li>Heating Medium: Water</li><li>Inside Dimensions (Diameter × Depth): 16.0 × 4.5 in / 40.6 × 11.4 cm</li><li>Outside Dimensions (w × d × h): 24 × 19 × 6 in / 61 × 48 × 15 cm</li><li>Total Wattage: 1300 W</li><li>Bath Temperature Range: 30–90 °C</li><li>Temperature Controller Type: Digital Electronic with LED Display</li><li>Controller Accuracy: ±2 °C</li><li>Side Mounted Control Box with Timer for Nitrogen &amp; Heat: Standard</li></ul><h4>34 Position N-EVAP (No Bath)</h4><ul><li>Bath Type: None</li><li>Instrumental Catalog Number: 11634-O</li><li>Number of Sample Positions: 34</li><li>Overall Dimension (w × d × h): 19 × 17 × 32 in / 48 × 43 × 81 cm</li><li>Sample Holder Layout: Circular</li><li>Gas Manifold Layout: Single Ring</li><li>Test Tube Range (Standard Sample Holder): 10–30 mm OD</li><li>Gas Flow Meter: 0–30 L/min</li><li>Stainless Steel Needles (Length × Gauge): 4.0 in × 19 ga / 102 mm × 19 ga</li><li>Built-in Nitrogen Gauge Input: 30–110 psig</li><li>Sample Tray Lift Mechanism: Dual Band Spring Hoist Assembly</li><li>Rotating, Leak Tight Gas Fitting: Standard</li><li>Acid Resistant Coating: Optional</li></ul><h3>MODELS</h3><h5>Catalog Number &nbsp;/&nbsp;&nbsp;&nbsp;Bath Type</h5><ul><li>11634: Water</li><li>11634-O: No Bath*</li></ul>*All “-O” models come with a base and stand assembly instead of a heated bath. These instruments are designed for evaporation procedures performed at ambient temperature.<h3>ACCESSORIES</h3><ul><li>Nitrogen generator (cat# NA1955)</li><li>Pasteur pipette adapters (cat# NA0636)</li><li>High temperature silicone fluid (cat# NA1240)</li><li>Various needle sizes and gauges</li></ul><h3>REPLACEMENT PARTS</h3><ul><li>P0627: Valve Tube Assembly – Post 1997</li><li>P0607: Luer &amp; washer for N-EVAP valve tube</li><li>P0634: Tube Fitting nylon 3 part for N-EVAP valve tube</li></ul>

Organomation 45 Position N-EVAP Nitrogen Evaporator

Our 45-position nitrogen evaporator offers the largest number of sample positions in our N-EVAP line. 

Our 45-position nitrogen evaporator (Catalog # 11645) offers the largest number of sample positions in our N-EVAP line. The sample holder has dual circular rings. The outer ring has 30 positions and can accommodate samples with an outside diameter of 10-19 mm The inner ring has 15 positions and can accommodate samples with an outside diameter of 16-30 mm and a minimum height of 70 mm.This time-tested, durable system provides the least expensive price per position of all our N-EVAPs. The evaporative system, along with the standard flow control and pressure reducing regulator, enables the operator to achieve the desired level of concentration with efficient nitrogen usage. Our unique dual band spring hoist assembly ensures easy and effective operator use. Additionally, the 45 position N-EVAP includes a side control box. Timed, digitally controlled water bath temperatures provide even evaporation rates. The pressure regulator and timer combine to allow timed automatic gas flow cut off which slows evaporation to a minimum once the timed cycle has been completed. The heat can also be shut off with the gas after a timed cycle.<ul><li>Gentle: N-EVAP nitrogen evaporators combine nitrogen blow down with a heated bath to gently concentrate delicate samples</li><li>Flexible: An adjustable sample holder design fits a wide variety of sample tubes and vials at once</li><li>Precise: Digital controls allow exact temperature regulation</li><li>Individualized Control: Optimize evaporation of diverse samples with individual gas flow control at each vial</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Organomation_45_Position_N_EVAP_Nitrogen_Evaporator_5_20078e3969.jpg" alt="Organomation: 45 Position N-EVAP Nitrogen Evaporator." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Organomation_45_Position_N_EVAP_Nitrogen_Evaporator_5_20078e3969.jpg 156w," sizes="100vw" width="1400" height="1400"><h3>STANDARD FEATURES</h3><ul><li>Nitrogen filter</li><li>Adjustable flow meter, 0-30 LPM</li><li>Built-in pressure reducing regulator</li><li>Side control box</li><li>Digital temperature controller</li><li>Electronic timer</li><li>Safety control cover plate</li><li>High pressure phthalate free tubing&nbsp;</li><li>High temperature limit switch for safety</li><li>Dual band spring hoist assembly&nbsp;</li><li>Precision needle valve tube assembly</li><li>Needles, 4 inch x 19 gauge with chrome plated brass hub and stainless steel shaft</li></ul><h3>OPTIONS&nbsp;</h3><ul><li>220v wiring harness (Option Code# -2), Cat# 11645-2</li><li>Z-Purge/positive pressure purge case (Option Code# -Z), Cat# 11645-Z</li><li>Acid resistant coating on instrument and needles (Option Code# -RT), Cat# 11645-RT</li></ul><h3>SPECS</h3><h4>45 Position N-EVAP (Water Bath)</h4><ul><li>Bath Type: Water</li><li>Instrumental Catalog Number: 11645</li><li>Number of Sample Positions: 45</li><li>Overall Dimension (w × d × h): 24 × 19 × 34 in / 61 × 48 × 86 cm</li><li>Sample Holder Layout: Circular</li><li>Gas Manifold Layout: Dual Rings</li><li>Outer Circle Sample Holder Test Tube Range: 10–19 mm OD</li><li>Inner Circle Sample Holder Test Tube Range: 16–30 mm OD; &gt;70 mm height</li><li>Gas Flow Meter: 0–30 L/min</li><li>Stainless Steel Needles (Length × Gauge): 4.0 in × 19 ga / 102 mm × 19 ga</li><li>Sample Tray Lift Mechanism: Dual Band Spring Hoist Assembly</li><li>Rotating, Leak Tight Gas Fitting: Standard</li><li>Built-in Nitrogen Gauge Input: 30–110 psig</li><li>Acid Resistant Coating: Optional</li></ul><h5>Heating Device Specs</h5><ul><li>Model Number: 13165</li><li>Heating Medium: Water</li><li>Inside Dimensions (Diameter × Depth): 16.0 × 4.5 in / 40.6 × 11.4 cm</li><li>Outside Dimensions (w × d × h): 24 × 19 × 6 in / 61 × 48 × 15 cm</li><li>Total Wattage: 1300 W</li><li>Bath Temperature Range: 30–90 °C</li><li>Temperature Controller Type: Digital Electronic with LED Display</li><li>Controller Accuracy: ±2 °C</li><li>Side Mount Control Box with Timer for Nitrogen &amp; Heat: Standard</li></ul><h4>45 Position N-EVAP (No Bath)</h4><ul><li>Bath Type: None</li><li>Instrumental Catalog Number: 11645-O</li><li>Number of Sample Positions: 45</li><li>Overall Dimension (w × d × h): 24 × 19 × 32 in / 61 × 48 × 81 cm</li><li>Sample Holder Layout: Circular</li><li>Gas Manifold Layout: Dual Rings</li><li>Outer Circle Sample Holder Test Tube Range: 10–19 mm OD</li><li>Inner Circle Sample Holder Test Tube Range: 16–30 mm OD; 70 mm height</li><li>Gas Flow Meter: 0–30 L/min</li><li>Stainless Steel Needles (Length × Gauge): 4.0 in × 19 ga / 102 mm × 19 ga</li><li>Sample Tray Lift Mechanism: Dual Band Spring Hoist Assembly</li><li>Rotating, Leak Tight Gas Fitting: Standard</li><li>Built-in Nitrogen Gauge Input: 30–110 psig</li><li>Acid Resistant Coating: Optional</li></ul><h3>MODELS</h3><h5>Catalog Number &nbsp;/&nbsp;&nbsp;&nbsp;Bath Type</h5><ul><li>11645: Water Bath</li><li>11634-O: No Bath*</li></ul>*All “-O” models come with a base and stand assembly instead of a heated bath. These instruments are designed for evaporation procedures performed at ambient temperature.<h3>ACCESSORIES</h3><ul><li>Nitrogen generator (cat# NA1955)</li><li>Pasteur pipette adapters (cat# NA0636)</li><li>High temperature silicone fluid (cat# NA1240)</li><li>Various needle sizes and gauges</li></ul><h3>REPLACEMENT PARTS</h3><ul><li>P0627: Valve Tube Assembly – Post 1997</li><li>P0607: Luer &amp; washer for N-EVAP valve tube</li><li>P0634: Tube Fitting nylon 3 part for N-EVAP valve tube</li></ul>

Products from category Sample preparation automation - page 3

Related content

PFAS in Water, Food & Packaging: Michelle Taylor on the "Forever Chemicals" Documentary Series

CEITEC Microrobots Could Speed Up Beer Production and Food Quality Control

The Importance of Detecting Per- and Polyfluoroalkyl Substances (PFAS)