In the week of September 21, the following webinars await you in the field of gas / solid phase and especially Raman, FTIR, GC and GC/MS.<blockquote><h4><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/webinars">👉 DETAILS AND REGISTRATION IN THE WEBINARS SECTION</a></h4>👉 Search and filter in the largest global database with over 6 000 GC, LC, MS and spectroscopy webinars.</blockquote><h5>1. Separation Science: How Do You Tackle Sample Prep for Diverse SVOCs?</h5><ul><li>Tu, 22.9.2026 09:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/webinar/6519">Registration</a></li></ul>Join the webinar on sample preparation for SVOC analysis in water. Learn how to improve recovery and workflow efficiency across extraction methods.<h5>2. Restek Corporation: Liner selection and injection techniques in GC</h5><ul><li>Tu, 22.9.2026 14:30 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/webinar/6543">Registration</a></li></ul>Join our webinar on GC liner selection and injection techniques. Learn key criteria to optimize sample transfer for gas and liquid samples.<h5>3. Agilent Technologies: How to Perform Routine Quantification by FTIR: Tips &amp; Tricks Workshop</h5><ul><li>Tu, 22.9.2026 20:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/webinar/6442">Registration</a></li></ul>Master routine FTIR quantification in this hands-on workshop. Learn how to use MicroLab and MicroLab Quant software to measure standards, build calibration curves, and analyze real-world samples.<h5>4. Agilent Technologies: Learn How FTIR Can Help You with Contamination and Poor Product Quality</h5><ul><li>Tu, 22.9.2026 21:30 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/webinar/6441">Registration</a></li></ul>Discover how Agilent portable FTIR spectrometers enable fast, cost-effective contamination analysis with versatile sampling options to address product quality and equipment issues.<h5>5. Waters Corporation: Unlocking New Analytical Possibilities with Waters APGC Solutions</h5><ul><li>Th, 24.9.2026 10:30 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/webinar/6546">Registration</a></li></ul>Learn how Waters APGC technology provides soft ionization for GC-MS, enhancing sensitivity while preserving molecular ion information for confident compound identification.<h5>6. Agilent Technologies: Detection and Identification of Microplastics in Water and Other Matrices Using the Agilent Laser Infrared Spectroscopy Microscope</h5><ul><li>Th, 24.9.2026 11:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/webinar/6540">Registration</a></li></ul>Discover how the Agilent LDIR 8700 uses QCL-based infrared imaging to automate rapid microplastics analysis, data processing, and reporting while supporting current standards.<h5>7. Markes International: What defines an Aroma? Advanced GC-MS strategies for fragrance characterization and off-odor analysis</h5><ul><li>Th, 24.9.2026 16:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/webinar/6545">Registration</a></li></ul>Explore advanced GC-MS strategies for fragrance characterization and off-odor analysis, with applications ranging from incense to cosmetics.

Webinars LabRulezGCMS Week 39/2026

Analysis of characteristic flavor compounds in coffee peels subjected to different thermal processing treatments based on GC–IMS and HS-SPME–GC–MS combined with chemical pattern recognition

Combining elemental analysis and molecular techniques to characterize Ancient Egyptian mummification balms

Article

Webinars

Food

Scientific article

Science and research

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Phenomenex Strata C18-U Solid Phase Extraction (SPE)

C18 sorbent with no end-capping, giving the phase moderate hydrophobic selectivity with slight polar selectivity due to the active silanol groups.

Moderate Hydrophobic Selectivity Solid Phase Extraction (SPE)C18 sorbent with no end-capping, giving the phase moderate hydrophobic selectivity with slight polar selectivity due to the active silanol groups.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Strata_C18_U_f0c8e66506.webp" alt="Phenomenex: Strata C18-U SPE" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Strata_C18_U_f0c8e66506.webp 245w," sizes="100vw" width="500" height="150"><ul><li>Surface Area (m²/g): 500</li><li>Separation Mode: Reversed Phase</li><li>Pore Size: 70</li><li>Particle Size: 55</li><li>Recommended Use: Enhanced cleanup of hydrophobic compounds that contain hydroxy or amine functional groups</li></ul><h4>Starting Method</h4><h5>Strata Reversed Phase</h5><ul><li>Condition: 1 mL Methanol</li><li>Equilibrate: 1 mL DI Water</li><li>Load: Pretreated sample</li><li>Wash: 1 mL 5% Methanol in DI Water, dry under vacuum for 2-5 min</li><li>Elute: 1 mL Methanol</li></ul>Based on 100 mg/1 mL sorbent mass. The above is a convenient starting point for SPE method development, further optimization may be required to tailor the method for your specific extraction needs.

Phenomenex Strata C18-T Solid Phase Extraction (SPE)

A wide-pore C18 sorbent that offers strong hydrophobic selectivity and accommodates molecules up to 75 kD in size.

Strong Hydrophobic Retention Solid Phase Extraction (SPE)A wide-pore C18 sorbent that offers strong hydrophobic selectivity and accommodates molecules up to 75 kD in size.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Strata_C18_T_294d3923f5.webp" alt="Phenomenex: Strata C18-T" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Strata_C18_T_294d3923f5.webp 245w," sizes="100vw" width="500" height="150"><ul><li>Surface Area (m²/g): -</li><li>Separation Mode: Reversed Phase</li><li>Particle Size: 55</li><li>Recommended Use: Wide pore for the extraction of large hydrophobic molecules (up to 75 kDa)</li></ul><h4>Starting Method</h4><h5>Strata Reversed Phase</h5><ul><li>Condition: 1 mL Methanol</li><li>Equilibrate: 1 mL DI Water</li><li>Load: Pretreated sample</li><li>Wash: 1 mL 5% Methanol in DI Water, dry under vacuum for 2-5 min</li><li>Elute: 1 mL Methanol</li></ul>Based on 100 mg/1 mL sorbent mass. The above is a convenient starting point for SPE method development, further optimization may be required to tailor the method for your specific extraction needs.

Phenomenex Strata C8 Solid Phase Extraction (SPE)

An end-capped C8 sorbent that offers moderate hydrophobic retention with negligible secondary polar interactions from active silanol groups. 

Reversed Phase Solid Phase Extraction (SPE)An end-capped C8 sorbent that offers moderate hydrophobic retention with negligible secondary polar interactions from active silanol groups. &nbsp;Ideal for compounds that may interact too strongly with a C18 sorbent.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Strata_C8_9efc4274c5.webp" alt="Phenomenex: Strata C8" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Strata_C8_9efc4274c5.webp 245w," sizes="100vw" width="500" height="150"><ul><li>Surface Area (m²/g): -</li><li>Separation Mode: Reversed Phase</li><li>Particle Size: 25, 55</li><li>Recommended Use: Extraction of extremely hydrophobic compounds that are retained too tightly on C18-E.</li></ul><h4>Starting Method</h4><h5>Strata Reversed Phase</h5><ul><li>Condition: 1 mL Methanol</li><li>Equilibrate: 1 mL DI Water</li><li>Load: Pretreated sample</li><li>Wash: 1 mL 5% Methanol in DI Water, dry under vacuum for 2-5 min</li><li>Elute: 1 mL Methanol</li></ul>Based on 100 mg/1 mL sorbent mass. The above is a convenient starting point for SPE method development, further optimization may be required to tailor the method for your specific extraction needs.

Phenomenex Strata Phenyl Solid Phase Extraction (SPE)

A short alkyl chain with a phenyl group provides moderate hydrophobic selectivity and aromatic selectivity through π−π interactions.

Retention of Aromatic CompoundsA short alkyl chain with a phenyl group provides moderate hydrophobic selectivity and aromatic selectivity through π−π interactions.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Strata_Phenyl_5bc4ec65e4.webp" alt="Phenomenex: Strata Phenyl" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Strata_Phenyl_5bc4ec65e4.webp 245w," sizes="100vw" width="500" height="150"><ul><li>Surface Area (m²/g): 500</li><li>Separation Mode: Reversed Phase</li><li>Pore size: 70</li><li>Particle Size: 55</li><li>Recommended Use: Extraction of aromatic and hydrophobic compounds</li></ul><h4>Starting Method</h4><h5>Strata Reversed Phase</h5><ul><li>Condition: 1 mL Methanol</li><li>Equilibrate: 1 mL DI Water</li><li>Load: Pretreated sample</li><li>Wash: 1 mL 5% Methanol in DI Water, dry under vacuum for 2-5 min</li><li>Elute: 1 mL Methanol</li></ul>Based on 100 mg/1 mL sorbent mass. The above is a convenient starting point for SPE method development, further optimization may be required to tailor the method for your specific extraction needs.

Phenomenex Strata SDB-L Solid Phase Extraction (SPE)

A rugged polymer sorbent that is pH stable from 1-14 and offers hydrophobic and aromatic selectivity for reversed phase applications.

Styrene-Divinylbenzene Solid Phase Extraction (SPE) SorbentA rugged polymer sorbent that is pH stable from 1-14 and offers hydrophobic and aromatic selectivity for reversed phase applications.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Strata_SDB_L_49e276aab1.jpg" alt="Phenomenex: Strata-SDB-L" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Strata_SDB_L_49e276aab1.jpg 193w," sizes="100vw" width="208" height="168"><ul><li>Surface Area (m²/g): 500</li><li>Separation Mode: Reversed Phase</li><li>Pore size: 260</li><li>Particle Size: 100</li><li>Recommended Use: Extraction of hydrophobic and aromatic compounds</li></ul><h4>Starting Method</h4><h5>Strata Reversed Phase</h5><ul><li>Condition: 1 mL Methanol</li><li>Equilibrate: 1 mL DI Water</li><li>Load: Pretreated sample</li><li>Wash: 1 mL 5% Methanol in DI Water, dry under vacuum for 2-5 min</li><li>Elute: 1 mL Methanol</li></ul>Based on 100 mg/1 mL sorbent mass. The above is a convenient starting point for SPE method development, further optimization may be required to tailor the method for your specific extraction needs.

Phenomenex Strata Eco Screen Solid Phase Extraction (SPE)

This proprietary normal phase sorbent is topped with sodium sulfate to remove any excess water and is used for the extraction of hydrocarbons from environmental samples.

Specialty Solid Phase Extraction (SPE) SorbentThis proprietary normal phase sorbent is topped with sodium sulfate to remove any excess water and is used for the extraction of hydrocarbons from environmental samples, resulting in high recoveries of naphthalene.

Phenomenex Strata EPH Solid Phase Extraction (SPE)

This specialty normal phase sorbent was developed for the fractionation of aliphatic and aromatic hydrocarbons from environmental samples.

Specialty Solid Phase Extraction (SPE) SorbentThis specialty normal phase sorbent was developed for the fractionation of aliphatic and aromatic hydrocarbons from environmental samples.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Strata_eph_6f99720a51.webp" alt="Phenomenex: Strata-EPH" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Strata_eph_6f99720a51.webp 245w," sizes="100vw" width="500" height="150"><ul><li>Surface Area (m²/g): -</li><li>Separation Mode: Multi-mode</li><li>Particle Size: 200</li><li>Recommended Use: Fractionation of aliphatic and aromatic hydrocarbons from environmental samples</li></ul><h4>Starting Method</h4><h5>Strata EPH Normal Phase</h5><ul><li>Condition: IPA/DCM</li><li>Equilibrate: Hexane</li><li>Load: Pretreated sample</li><li>Wash: 5 % DCM in Hexane</li><li>Elute: 1:1 Hexane / DCM or 1:1 Hexane / IPA</li></ul>Based on 100 mg/1 mL sorbent mass. The above is a convenient starting point for SPE method development, further optimization may be required to tailor the method for your specific extraction needs.

Phenomenex Strata PAH Solid Phase Extraction (SPE)

Strata PAH is a proprietary sorbent designed to provide high recoveries of polycyclic aromatic hydrocarbons from water.

Specialty Solid Phase Extraction (SPE) SorbentStrata PAH (Polycyclic Aromatic Hydrocarbons) is a proprietary sorbent designed to provide high recoveries of polycyclic aromatic hydrocarbons from water (as specified in EPA Method 550.1) while simultaneously removing humic acids from the extract.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Strata_pah_c48e1fab83.webp" alt="Phenomenex: Strata-PAH" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Strata_pah_c48e1fab83.webp 245w," sizes="100vw" width="500" height="150"><ul><li>Surface Area (m²/g): -</li><li>Separation Mode: Reversed Phase</li><li>Particle Size: 55</li><li>Recommended Use: Extraction of polycyclic aromatic hydrocarbons from water (as specified in EPA Method 550.1) while simultaneously removing humic acids from the extract</li></ul>

Phenomenex Strata PFAS Solid Phase Extraction (SPE)

A new stacked cartridge able to offer 2x gains in productivity and reduce the need for multiple tubes, transfer steps, and wasted time. 

Specialty Solid Phase Extraction (SPE) SorbentA new stacked cartridge able to offer 2x gains in productivity and reduce the need for multiple tubes, transfer steps, and wasted time. This product is recommended to be used for EPA 1633 and DOD QSM 5.1/5.3 guidelines to minimize multiple sample but still provide high recoveries of low level PFAS (Per- and Polyfluoroalkyl Substances) in solid samples, soils, biota, sediments, or non-drinking water samples.<ul><li>Surface Area (m²/g): -</li><li>Separation Mode: Multi-Mode</li><li>Pore Size: 0</li><li>Recommended Use: for EPA 1633 and DOD QSM 5.1/5.3 applications for diverse matrices and non-drinking water PFAS applications</li></ul><h4>Stacked SPE Cartridges for Efficient PFAS Extraction</h4>Strata PFAS is a stacked solid phase extraction cartridge for EPA method 1633 and DOD QSM 5.1/5.3 applications.<ul><li>Reliable SPE with 2x gains in productivity</li><li>Reproducible extraction</li><li>Reduced need for multiple tubes, transfer steps, and wasted time</li></ul>

Phenomenex Zebron ZB-FFAP GC Columns

Zebron ZB-FFAP - Popular choice for food industry method development

Improved Resolution for Free Fatty Acids<ul><li>Popular choice for food industry method development</li><li>High polarity column with excellent thermal and chemical stability</li><li>Improve peak shape for underivatized acids, organic acids, free fatty acids, and alcohols</li><li>Bonded, solvent rinsable nitroterephthalic acid modified polyethylene glycolphase</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Zebron_ZB_WAX_85cadc4b26.webp" alt="Phenomenex: Zebron ZB-FFAP" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Zebron_ZB_WAX_85cadc4b26.webp 245w," sizes="100vw" width="500" height="150"><h5>Recommended Applications</h5><ul><li>Acrylates, Alcohols, Aldehydes, Free Fatty Acids, Ketones, Organic Acids, Phenols, Volatile Free Acids</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Zebron_ZB_FFAP_131d038bab.jpg" alt="Phenomenex: Zebron ZB-FFAP." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Zebron_ZB_FFAP_131d038bab.jpg 164w," sizes="100vw" width="670" height="636">Upgrade to Zebron from any nitroterephthalic acid modified polyethylene glycol phase:<h5>Agilent®</h5><ul><li>DB®-FFAP</li><li>HP-FFAP</li><li>CP-Wax 58 FFAP CB</li><li>CP-FFAP CB</li></ul><h5>Restek®</h5><ul><li>Stabilwax®-DA</li></ul><h5>SGE®</h5><ul><li>BP21</li></ul><h5>Supelco®</h5><ul><li>Nukol</li><li>SPB®-1000</li></ul><h5>OV®</h5><ul><li>OV-351</li></ul>

Related content

Combining elemental analysis and molecular techniques to characterize Ancient Egyptian mummification balms

Analysis of characteristic flavor compounds in coffee peels subjected to different thermal processing treatments based on GC–IMS and HS-SPME–GC–MS combined with chemical pattern recognition

Webinars LabRulezGCMS Week 39/2026