In the week of September 21, the following webinars await you in the field of gas / solid phase and especially Raman, FTIR, GC and GC/MS.<blockquote><h4><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/webinars">👉 DETAILS AND REGISTRATION IN THE WEBINARS SECTION</a></h4>👉 Search and filter in the largest global database with over 6 000 GC, LC, MS and spectroscopy webinars.</blockquote><h5>1. Separation Science: How Do You Tackle Sample Prep for Diverse SVOCs?</h5><ul><li>Tu, 22.9.2026 09:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/webinar/6519">Registration</a></li></ul>Join the webinar on sample preparation for SVOC analysis in water. Learn how to improve recovery and workflow efficiency across extraction methods.<h5>2. Restek Corporation: Liner selection and injection techniques in GC</h5><ul><li>Tu, 22.9.2026 14:30 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/webinar/6543">Registration</a></li></ul>Join our webinar on GC liner selection and injection techniques. Learn key criteria to optimize sample transfer for gas and liquid samples.<h5>3. Agilent Technologies: How to Perform Routine Quantification by FTIR: Tips &amp; Tricks Workshop</h5><ul><li>Tu, 22.9.2026 20:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/webinar/6442">Registration</a></li></ul>Master routine FTIR quantification in this hands-on workshop. Learn how to use MicroLab and MicroLab Quant software to measure standards, build calibration curves, and analyze real-world samples.<h5>4. Agilent Technologies: Learn How FTIR Can Help You with Contamination and Poor Product Quality</h5><ul><li>Tu, 22.9.2026 21:30 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/webinar/6441">Registration</a></li></ul>Discover how Agilent portable FTIR spectrometers enable fast, cost-effective contamination analysis with versatile sampling options to address product quality and equipment issues.<h5>5. Waters Corporation: Unlocking New Analytical Possibilities with Waters APGC Solutions</h5><ul><li>Th, 24.9.2026 10:30 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/webinar/6546">Registration</a></li></ul>Learn how Waters APGC technology provides soft ionization for GC-MS, enhancing sensitivity while preserving molecular ion information for confident compound identification.<h5>6. Agilent Technologies: Detection and Identification of Microplastics in Water and Other Matrices Using the Agilent Laser Infrared Spectroscopy Microscope</h5><ul><li>Th, 24.9.2026 11:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/webinar/6540">Registration</a></li></ul>Discover how the Agilent LDIR 8700 uses QCL-based infrared imaging to automate rapid microplastics analysis, data processing, and reporting while supporting current standards.<h5>7. Markes International: What defines an Aroma? Advanced GC-MS strategies for fragrance characterization and off-odor analysis</h5><ul><li>Th, 24.9.2026 16:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/webinar/6545">Registration</a></li></ul>Explore advanced GC-MS strategies for fragrance characterization and off-odor analysis, with applications ranging from incense to cosmetics.

Webinars LabRulezGCMS Week 39/2026

Analysis of characteristic flavor compounds in coffee peels subjected to different thermal processing treatments based on GC–IMS and HS-SPME–GC–MS combined with chemical pattern recognition

Combining elemental analysis and molecular techniques to characterize Ancient Egyptian mummification balms

Article

Webinars

Food

Scientific article

Science and research

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Phenomenex Strata Eco Screen Solid Phase Extraction (SPE)

This proprietary normal phase sorbent is topped with sodium sulfate to remove any excess water and is used for the extraction of hydrocarbons from environmental samples.

Specialty Solid Phase Extraction (SPE) SorbentThis proprietary normal phase sorbent is topped with sodium sulfate to remove any excess water and is used for the extraction of hydrocarbons from environmental samples, resulting in high recoveries of naphthalene.

Phenomenex Strata EPH Solid Phase Extraction (SPE)

This specialty normal phase sorbent was developed for the fractionation of aliphatic and aromatic hydrocarbons from environmental samples.

Specialty Solid Phase Extraction (SPE) SorbentThis specialty normal phase sorbent was developed for the fractionation of aliphatic and aromatic hydrocarbons from environmental samples.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Strata_eph_6f99720a51.webp" alt="Phenomenex: Strata-EPH" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Strata_eph_6f99720a51.webp 245w," sizes="100vw" width="500" height="150"><ul><li>Surface Area (m²/g): -</li><li>Separation Mode: Multi-mode</li><li>Particle Size: 200</li><li>Recommended Use: Fractionation of aliphatic and aromatic hydrocarbons from environmental samples</li></ul><h4>Starting Method</h4><h5>Strata EPH Normal Phase</h5><ul><li>Condition: IPA/DCM</li><li>Equilibrate: Hexane</li><li>Load: Pretreated sample</li><li>Wash: 5 % DCM in Hexane</li><li>Elute: 1:1 Hexane / DCM or 1:1 Hexane / IPA</li></ul>Based on 100 mg/1 mL sorbent mass. The above is a convenient starting point for SPE method development, further optimization may be required to tailor the method for your specific extraction needs.

Phenomenex Strata PAH Solid Phase Extraction (SPE)

Strata PAH is a proprietary sorbent designed to provide high recoveries of polycyclic aromatic hydrocarbons from water.

Specialty Solid Phase Extraction (SPE) SorbentStrata PAH (Polycyclic Aromatic Hydrocarbons) is a proprietary sorbent designed to provide high recoveries of polycyclic aromatic hydrocarbons from water (as specified in EPA Method 550.1) while simultaneously removing humic acids from the extract.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Strata_pah_c48e1fab83.webp" alt="Phenomenex: Strata-PAH" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Strata_pah_c48e1fab83.webp 245w," sizes="100vw" width="500" height="150"><ul><li>Surface Area (m²/g): -</li><li>Separation Mode: Reversed Phase</li><li>Particle Size: 55</li><li>Recommended Use: Extraction of polycyclic aromatic hydrocarbons from water (as specified in EPA Method 550.1) while simultaneously removing humic acids from the extract</li></ul>

Phenomenex Strata PFAS Solid Phase Extraction (SPE)

A new stacked cartridge able to offer 2x gains in productivity and reduce the need for multiple tubes, transfer steps, and wasted time. 

Specialty Solid Phase Extraction (SPE) SorbentA new stacked cartridge able to offer 2x gains in productivity and reduce the need for multiple tubes, transfer steps, and wasted time. This product is recommended to be used for EPA 1633 and DOD QSM 5.1/5.3 guidelines to minimize multiple sample but still provide high recoveries of low level PFAS (Per- and Polyfluoroalkyl Substances) in solid samples, soils, biota, sediments, or non-drinking water samples.<ul><li>Surface Area (m²/g): -</li><li>Separation Mode: Multi-Mode</li><li>Pore Size: 0</li><li>Recommended Use: for EPA 1633 and DOD QSM 5.1/5.3 applications for diverse matrices and non-drinking water PFAS applications</li></ul><h4>Stacked SPE Cartridges for Efficient PFAS Extraction</h4>Strata PFAS is a stacked solid phase extraction cartridge for EPA method 1633 and DOD QSM 5.1/5.3 applications.<ul><li>Reliable SPE with 2x gains in productivity</li><li>Reproducible extraction</li><li>Reduced need for multiple tubes, transfer steps, and wasted time</li></ul>

Phenomenex Strata CN Solid Phase Extraction (SPE)

Strata CN is a polar phase with slight hydrophobic selectivity in reversed phase mode and moderate polar selectivity in normal phase mode.

Normal Phase Solid Phase Extraction (SPE)A polar phase with slight hydrophobic selectivity in reversed phase mode and moderate polar selectivity in normal phase mode.<figure class="image"><img style="aspect-ratio:500/150;" src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Strata_cn_769c96c476.webp" alt="Phenomenex: Strata-CN" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Strata_cn_769c96c476.webp 245w," sizes="100vw" width="500" height="150"></figure><ul><li>Surface Area (m²/g): -</li><li>Separation Mode: Normal Phase</li><li>Particle Size: 55</li><li>Recommended Use: Extraction of polar compounds such as those that contain hydroxyl groups.</li></ul><h4>Starting Method</h4><ul><li>Condition: IPA/DCM</li><li>Equilibrate: Hexane</li><li>Load: Pretreated sample</li><li>Wash: 5 % DCM in Hexane</li><li>Elute: 1:1 Hexane / DCM or 1:1 Hexane / IPA</li></ul>Based on 100 mg/1 mL sorbent mass. The above is a convenient starting point for SPE method development, further optimization may be required to tailor the method for your specific extraction needs.

Phenomenex Strata Silica (Si-1) Solid Phase Extraction (SPE)

Strata Silica (Si-1) is a normal phase SPE sorbent with unbonded silica particle that offers strong polar selectivity.

Normal Phase Solid Phase Extraction (SPE)A polar phase with slight hydrophobic selectivity in reversed phase mode and moderate polar selectivity in normal phase mode.<figure class="image"><img style="aspect-ratio:500/150;" src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Strata_si_e4eb885006.webp" alt="Phenomenex: Strata-Silica (Si-1)" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Strata_si_e4eb885006.webp 245w," sizes="100vw" width="500" height="150"></figure><ul><li>Surface Area (m²/g): 550, m²/g, null m²/g, 490 m²/g</li><li>Separation Mode: Normal Phase</li><li>Pore Size: 70</li><li>Particle Size: 55</li><li>Recommended Use: Extraction of polar compounds that are similar in structure</li></ul><h4>Starting Method</h4><h5>Strata Normal Phase Method</h5><ul><li>Condition: IPA/DCM</li><li>Equilibrate: Hexane</li><li>Load: Pretreated sample</li><li>Wash: 5 % DCM in Hexane</li><li>Elute: 1:1 Hexane / DCM or 1:1 Hexane / IPA</li></ul>Based on 100 mg/1 mL sorbent mass. The above is a convenient starting point for SPE method development, further optimization may be required to tailor the method for your specific extraction needs.

Phenomenex Strata Melamine Solid Phase Extraction (SPE)

A proprietary phase that allows for the simultaneous extraction of melamine and cyanuric acid out of food and biological samples.

Specialty Solid Phase Extraction (SPE) SorbentA proprietary phase that allows for the simultaneous extraction of melamine and cyanuric acid out of food and biological samples.

Phenomenex Strata SCX Solid Phase Extraction (SPE)

A benzene sulfonic acid group is bonded to the surface of the silica particle, giving strong cation-exchange selectivity.

Ion-Exchange Solid Phase Extraction (SPE) SorbentA benzene sulfonic acid group is bonded to the surface of the silica particle, giving strong cation-exchange selectivity.<ul><li>Extraction of 1 °, 2 °, and 3 amines</li></ul><figure class="image"><img style="aspect-ratio:791/384;" src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Strata_SCX_SPE_f35df1035c.jpg" alt="Phenomenex: Strata SCX" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Strata_SCX_SPE_f35df1035c.jpg 245w," sizes="100vw" width="791" height="384"></figure><ul><li>Surface Area (m²/g): -</li><li>Separation Mode: Ion Exchange</li><li>Particle Size: 55</li><li>Recommended Use: Extraction of weakly basic compounds</li></ul><h4>Starting Method</h4><h5>Strata SCX – Strong Cation-Exchange</h5><ul><li>Condition: 1 mL Methanol</li><li>Equilibrate: 1 mL Acidified Water</li><li>Load: Pretreated sample (acidified)</li><li>Wash 1: 1 mL 0.1N HCl in Water</li><li>Wash 2: 1 mL 0.1N HCl in Methanol, dry under vacuum for 2-5 min</li><li>Elute: 1 mL 5 % NH4OH in Methanol</li></ul>Based on 100 mg/1 mL sorbent mass. The above is a convenient starting point for SPE method development, further optimization may be required to tailor the method for your specific extraction needs.

Phenomenex Strata NH2 Solid Phase Extraction (SPE)

This amino phase offers strong polar selectivity and hydrogen bonding under normal phase conditions or can be used as a weak anion-exchange sorbent.

Normal Phase Solid Phase Extraction (SPE)This amino phase offers strong polar selectivity and hydrogen bonding under normal phase conditions or can be used as a weak anion-exchange sorbent.<figure class="image"><img style="aspect-ratio:500/150;" src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Strata_nh2_a7c3599f55.webp" alt="Phenomenex: Strata-NH2" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Strata_nh2_a7c3599f55.webp 245w," sizes="100vw" width="500" height="150"></figure><ul><li>Surface Area (m²/g): -</li><li>Separation Mode: Normal Phase</li><li>Pore Size: 100</li><li>Particle Size: 25, 55</li><li>Recommended Use: Strong polar selectivity and hydrogen bonding under normal phase conditions or can be used as a weak anion-exchange sorbent</li></ul><h4>Starting Method</h4><h5>Strata NH2 – Weak Anion-Exchange</h5><ul><li>Condition: 1 mL Methanol</li><li>Equilibrate: 1 mL Water, pH 6-7</li><li>Load: Pretreated sample, pH 6-7</li><li>Wash 1: 1 mL 25mM Ammonium Acetate Buffer, pH 6-7</li><li>Wash 2: 1 mL Methanol, dry under vacuum for 2-5 min</li><li>Elute Any Acid: 1 mL 5% NH4OH in Methanol</li><li>Elute Weak Acids: 1 mL 5% Formic Acid in Methanol</li></ul>Based on 100 mg/1 mL sorbent mass. The above is a convenient starting point for SPE method development, further optimization may be required to tailor the method for your specific extraction needs.

Phenomenex Strata SAX Solid Phase Extraction (SPE)

The quaternary amine group on this sorbent remains positively charged under all conditions, giving a strong anion-exchange mechanism of retention.

Ion-Exchange Solid Phase Extraction Sorbent (SPE)The quaternary amine group on this sorbent remains positively charged under all conditions, giving a strong anion-exchange mechanism of retention.<figure class="image"><img style="aspect-ratio:500/150;" src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Strata_sax_470d923b27.webp" alt="Phenomenex: Strata-SAX" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Strata_sax_470d923b27.webp 245w," sizes="100vw" width="500" height="150"></figure><ul><li>Surface Area (m²/g): -</li><li>Separation Mode: Ion Exchange</li><li>Particle Size: 55</li><li>Recommended Use: Extraction of weakly acidic compounds</li></ul><h4>Starting Method</h4><h5>Strata SAX – Strong Anion-Exchange</h5><ul><li>Condition: 1 mL Methanol</li><li>Equilibrate: 1 mL DI Water</li><li>Load: Pretreated sample, pH 6-7</li><li>Wash 1: 1 mL 25mM Ammonium Acetate Buffer, pH 6-7</li><li>Wash 2: 1 mL Methanol, dry under vacuum for 2-5 min</li><li>Elute: 1 mL 5% Formic Acid in Methanol</li></ul>Based on 100 mg/1 mL sorbent mass. The above is a convenient starting point for SPE method development, further optimization may be required to tailor the method for your specific extraction needs.

Products focused on Sample Preparation from Phenomenex - page 2

Related content

Combining elemental analysis and molecular techniques to characterize Ancient Egyptian mummification balms

Analysis of characteristic flavor compounds in coffee peels subjected to different thermal processing treatments based on GC–IMS and HS-SPME–GC–MS combined with chemical pattern recognition

Webinars LabRulezGCMS Week 39/2026