International team of scientists shed light on the processes that drive the global distribution of air pollutants - the re-emission of polycyclic aromatic compounds (PACs). The new study was published in the Journal of Hazardous Materials.PACs are long-lived toxic substances contributing significantly to air pollution in the industrialized world. They are inevitable byproducts of all kinds of fossil fuel and wood combustion, and following dry or wet deposition (rainfall), PACs are transferred to and stored in soils. In response to continued pollution and wind conditions for transport and deposition, PACs may volatilize from the soil surface and be re-released into the air. That way, soils become secondary sources of these air pollutants.By determining air and soil contamination as well as the exchange between air and soil in rural grassland and in a remote forest, the scientists identified a number of substances being potentially re-emitted.“Such re-emissions might add significantly to the concentrations of PACs in ambient air far from source areas," emphasizes the importance of these findings Gerhard Lammel from the RECETOX center.For the first time, they also quantified the soil’s re-emission flux (mass of PACs volatilised per time and area) in a boreal forest in Finland. When extrapolating this flux to the country scale, they found it comparable to the primary emissions from industry, household heating, and motor vehicle traffic in Finland. The results of the study, published in the Journal of Hazardous Materials, suggest that such secondary emissions in countries receiving air pollution from neighboring states might even exceed the domestic primary emissions."Our results suggest that emission inventories at least in the less populated countries of Europe should account for this additional type of sources. We need more measurements to help identify sensitivities towards certain soil conditions driving these re-emissions to ultimately arrive at more accurate emission inventories across landscapes,” adds Lammel.Furthermore, the research highlights the 'grasshopper effect’, meaning that the potential of re-emission enhances the widespread distribution and environmental lifetimes of substances hazardous for human health and ecosystems.<blockquote>The research was supported by the Czech Science Foundation (25-17534S); Research Infrastructure ACTRIS-CZ (No. LM2023030) and RECETOX (No. LM2023069) financed by the Ministry of Education, Youth and Sports, and the OP RDE (the CETOCOEN EXCELLENCE project No. CZ.02.1.01/0.0/0.0/17_043/0009632).</blockquote><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/RECETOX_MUNI_Studie_odhalila_necekane_velky_prinos_pudy_ke_znecisteni_ovzdusi_0c2b62ee68.jpg" alt="RECETOX-MUNI: Study reveals an unexpectedly large contribution to air pollution from soils" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_RECETOX_MUNI_Studie_odhalila_necekane_velky_prinos_pudy_ke_znecisteni_ovzdusi_0c2b62ee68.jpg 146w," sizes="100vw" width="738" height="790"><blockquote><h4>The original article</h4><h4><a target="_blank" rel="noopener noreferrer" href="https://www.sciencedirect.com/science/article/pii/S0304389426022636?via%3Dihub#sec0005">Polycyclic aromatic compounds in air – importance of re-volatilisation from soils</a></h4>Gerhard Lammel, Dominika Bezdeková, Jakub Martiník, Karsten Baumann, Rostislav Červenka, Petr Kukučka, Ondřej Letocha, Ludovic Mayer, Petra Přibylová, Roman Prokeš, Üllar Rannick, Risto TaipaleJ. Hazard. Mater., 2026, 516, 143283&nbsp;<a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1016/j.jhazmat.2026.143283">https://doi.org/10.1016/j.jhazmat.2026.143283</a><h6>licenced under<a target="_blank" rel="noopener noreferrer" href="https://creativecommons.org/licenses/by-nc/4.0/"> CC-BY 4.0</a></h6></blockquote><h4>Abstract</h4>Polycyclic aromatic hydrocarbons (PAHs) and their nitrated and oxygenated derivatives (NPAHs, OPAHs) are semivolatile air pollutants which may re-volatilise following atmospheric deposition to soil. Here, we determined polycyclic aromatic compounds’ (PACs) concentrations in air, topsoil and air equilibrated with soil at a rural grassland site and a boreal forest site. The samples were analysed by GC-MS/MS and the flux was studied by fugacity calculations and a micrometeorological flux-gradient method. In soil at the boreal site, OPAH and NPAH contributed much higher fractions to PAC contamination of air and soil than at the rural site, reflecting the conversion of primary PACs during transport from sources. The same number of PACs in soil have reached equilibrium concentration with air, despite one site being in a polluted and PAC source region and the other in a much less polluted and PAC receptor region. The direction of air-soil exchange was found insensitive to the modest day-night temperature variation at both sites. Upward diffusive flux was observed for one PAH, triphenylene, at the rural grassland site, and for three 3-ring PAHs and naphthaldehyde at the boreal forest site. There, emission fluxes were quantified and ranged 0.5–12 ng m−2 h−1. The results indicate that low molecular weight PAH secondary emissions in a receptor region may be of same order of magnitude as domestic primary emissions.

Study reveals an unexpectedly large contribution to air pollution from soils

Whether a drug can effectively bind to its target protein, or how different parts of a virus or a cell interact, depends on processes taking place at the level of individual molecules. Their behaviour is determined not only by their shape, but also by the electrostatic forces acting between them. Understanding how these forces are distributed helps scientists explain why certain molecules attract each other, how they bind and how they interact.This is where the <a target="_blank" rel="noopener noreferrer" href="https://acc.biodata.ceitec.cz/">Atomic Charge Calculator (ACC)</a> comes in. Researchers at Masaryk University have been developing this computational tool for more than a decade. Its third and most advanced generation to date was developed at CEITEC Masaryk University and the Faculty of Science at Masaryk University, in collaboration with the Faculty of Informatics at Masaryk University and Palacký University Olomouc.ACC III calculates the electric charges of individual atoms and visualises their distribution directly within three-dimensional molecular structures. It brings together twenty different calculation methods in a single environment and can work with a wide range of molecules – from small organic compounds to proteins and other large biomolecular structures.A key advantage of Atomic Charge Calculator III is that it combines a broad range of computational methods with ease of access. Basic calculations can be performed directly in a web browser, with no need to install specialised software or register for an account. The resulting charges can be displayed directly on a 3D model of the molecule. For advanced users and large-scale analyses, the platform also supports automated data processing and allows its computational core to be run locally.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/CEITEC_Co_pritahuje_molekuly_Nova_generace_nastroje_z_CEITEC_zviditelnuje_sily_mezi_atomy_d32d7bd2cd.jpg" alt="CEITEC/Biological Data Management and Analysis Core Facility: What Attracts Molecules? A New Generation of a CEITEC Tool Makes the Forces Between Atoms Visible: Oseltamivir bound to influenza virus neuraminidase (blue: positive partial charges, red: negative charges). A strong electrostatic interaction occurs between a negatively charged region of the drug and positively charged regions of the protein." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_CEITEC_Co_pritahuje_molekuly_Nova_generace_nastroje_z_CEITEC_zviditelnuje_sily_mezi_atomy_d32d7bd2cd.jpg 140w," sizes="100vw" width="1600" height="1786"><h3>Why are scientists interested in the electric charges of atoms?</h3>Electrons are not distributed evenly within molecules. Individual atoms can therefore carry different partial electric charges. These charges play an important role in determining how molecules behave towards their surroundings and towards one another.Positively and negatively charged regions of molecules can attract each other, while regions with the same charge repel each other. The distribution of these charges therefore helps determine which molecules approach each other, how they orient themselves and how strongly they may bind. In biology, this is important, for example, in molecular recognition or when a drug binds to its target protein. Understanding partial charges therefore helps scientists gain insight into the interactions underlying the behaviour of many molecular systems.There is, however, no single universal way to determine partial charges. Different computational methods can produce different values, and the choice of method also depends on how the results will be used. Accurate quantum-chemical calculations can also become very computationally demanding when large numbers of structures are involved. ACC III therefore brings together empirical methods that allow these calculations to be performed more quickly and on a large scale.“From the outset, we designed ACC III to make calculating partial atomic charges as straightforward as possible. Users do not need to install anything or deal with complicated settings – they simply upload a molecule and start the calculation with a single click. The application then suggests suitable methods from the twenty available and can handle both small molecules and large biomolecular structures,” says <a target="_blank" rel="noopener noreferrer" href="https://www.ceitec.eu/tomas-racek-ph-d/u94476?page=publication">Tomáš Raček</a>, who has been developing and maintaining ACC since 2018.<h3>How an antiviral drug binds to an influenza virus protein</h3>The authors demonstrate what charge distribution can reveal using the well-known antiviral drug oseltamivir, marketed as Tamiflu. The drug binds to neuraminidase, a protein of the influenza A virus. ACC III can show directly within the three-dimensional structure where positive and negative partial charges are located and how they contribute to the interaction between the drug and the protein.“The example of oseltamivir clearly shows why it is useful not only to calculate the charges, but also to visualise them directly within the structure. This allows us to see which parts of the two molecules interact electrostatically. The same approach can be used to study many other molecular systems,” explains Tomáš Raček.ACC III is not limited to small molecules. It can also work with proteins and other large biomolecular structures. The authors demonstrate this using a second example: the SARS-CoV-2 pore complex. Coronaviruses form these pores during replication in infected cells and use them to transport viral RNA across membranes. Visualising partial charges helps distinguish the parts of the complex that pass through the non-polar environment of the membrane from its more highly charged regions.<h3>From calculation straight to a 3D model</h3>The new generation of the Atomic Charge Calculator also offers more advanced visualisation. It uses Mol*, which allows calculated charges to be mapped directly onto a three-dimensional structure and explored interactively. A visualisation created using ACC III was also selected for the cover of the special Nucleic Acids Research Web Server Issue. Created by Tomáš Raček, the cover image shows the distribution of partial charges in a membrane protein system.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/CEITEC_Co_pritahuje_molekuly_Nova_generace_nastroje_z_CEITEC_zviditelnuje_sily_mezi_atomy_3_85cc310925.jpeg" alt="CEITEC/Oxford University Press: What Attracts Molecules? A New Generation of a CEITEC Tool Makes the Forces Between Atoms Visible: Cover page in Nucleic Acids Research journal." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_CEITEC_Co_pritahuje_molekuly_Nova_generace_nastroje_z_CEITEC_zviditelnuje_sily_mezi_atomy_3_85cc310925.jpeg 124w," sizes="100vw" width="1600" height="2011">Results can be downloaded in several standard formats and, for the first time, stored directly in the mmCIF format commonly used for three-dimensional biomolecular structures. Information about the structure and its calculated charges can therefore remain together in a single file and be used by other tools.For researchers who need to process large numbers of structures, ACC III also provides an API and a computational core that can be run locally. The platform can therefore be used both for individual calculations through its web interface and as part of larger automated analyses.<h3>More than a decade of development</h3>Scientists introduced the first Atomic Charge Calculator in 2015, followed by its second generation in 2020. In the meantime, the team also developed specialised tools: PDBCharges for structures from the Protein Data Bank and AlphaCharges for structures from the AlphaFold Database.“The Atomic Charge Calculator was never a one-off project,” says <a target="_blank" rel="noopener noreferrer" href="https://www.ceitec.eu/prof-radka-svobodova-ph-d/u17518?page=publication">Radka Svobodová</a>, Head of the Biological Data Management and Analysis Core Facility at CEITEC Masaryk University. “For more than a decade, we have been continuously developing tools that respond both to new possibilities in structural bioinformatics and to the needs of their users. The third generation combines straightforward web-based use with capabilities that are important for the automated processing of large numbers of molecular structures.”<blockquote>Atomic Charge Calculator III is freely available through its web interface and does not require registration for basic use. Its development was supported by the ELIXIR CZ research infrastructure.</blockquote><h5>The authors presented the new generation of the tool in <a target="_blank" rel="noopener noreferrer" href="https://academic.oup.com/nar/article/54/W1/W211/8662890">Nucleic Acids Research</a>.</h5>

What Attracts Molecules? A New Generation of a CEITEC Tool Makes the Forces Between Atoms Visible 

Not every concentration job can tolerate heat — and not every concentrator that handles heat well can handle cold. <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/products/2441">Refrigerated centrifugal vacuum concentrators</a> exist for a specific reason: proteins, RNA, enzymes, and synthetic peptides degrade quickly under thermal stress, and standard concentrators that rely on heat alone can compromise sample integrity before evaporation finishes. We compared two of the leading refrigerated systems — the Labconco Refrigerated CentriVap and the <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/products/2611">Thermo Fisher Refrigerated SpeedVac SRF110</a> — to see how they stack up for labs where sample preservation is non-negotiable.<blockquote><a target="_blank" rel="noopener noreferrer" href="https://explore.organomation.com/labconco-refrigerated-centrivap-vs-thermo-fisher-refrigerated-speedvac">Download the full comparison with pricing here!</a></blockquote><h3>The Problem Refrigeration Actually Solves</h3>It's a detail that gets lost in most spec-sheet comparisons: running a<a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/lcms/products?manufacturerItems=540&amp;search=centrivap"> vacuum concentrator </a>without temperature control can cause a sample to over-cool itself. As solvent evaporates under vacuum, the process pulls latent heat from the sample — the same evaporative cooling effect that makes sweat feel cold on skin. For a heat-stable solvent, that's irrelevant. For a temperature-sensitive biomolecule, it can drop the sample low enough to risk unwanted freezing or sublimation mid-run. Labconco's own engineering notes for the Refrigerated CentriVap describe this directly: the unit pairs a refrigeration system with a heater so operators can hold a precise set-point temperature and avoid sublimated samples caused by evaporative cooling. That's the whole reason this product category exists, and it's worth understanding before comparing specs line by line.<h3>Price: A Wider Gap at the High End</h3>The Labconco Refrigerated CentriVap is typically priced around $13,000 USD. The Thermo Fisher SRF110 runs higher, generally $15,000–$17,000 USD, and that's before factoring in the modular kit components — Thermo Fisher sells the SRF110 with a separate vacuum system, rotor, vapor trap, and heat transfer fluid bundled into the total kit price. The price gap between these two refrigerated units is proportionally larger than what we found comparing their non-refrigerated counterparts, which makes the value case for the CentriVap even more pronounced at this tier.<h3>Capacity: The Difference That Matters Most Right Now</h3>This is where the two systems really separate, and it lines up with where lab demand is heading. The Refrigerated CentriVap processes up to 312 samples per run; the SRF110 tops out at 132. Both handle volumes up to 50 mL, so this isn't a volume trade-off the way it was in our earlier comparison — it's a straight throughput advantage for the CentriVap.That gap matters because<a target="_blank" rel="noopener noreferrer" href="https://peptidestaff.com/industry-trends/peptide-therapy-market-forecast-2026/"> peptide-based therapeutics </a>have become one of the fastest-growing classes of drugs in the pharmaceutical industry, and manufacturing capacity — not demand — is widely cited as the primary bottleneck holding the sector back. <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/article/7541">GLP-1 programs</a> in particular are pushing <a target="_blank" rel="noopener noreferrer" href="https://www.bachem.com/knowledge-center/glp-1-demand-for-peptide-manufacturers/">peptide manufacturers</a> toward industrialized, large-scale production platforms rather than one-off batch work. <a target="_blank" rel="noopener noreferrer" href="https://www.organomation.com/">Sample prep equipment</a> sits squarely inside that bottleneck: every purification run, HPLC fraction, and concentration step has to scale alongside the chemistry. A concentrator that processes more than double the samples per run, like the Refrigerated CentriVap, is a meaningfully different proposition for a peptide synthesis or purification lab than it would have been five years ago.<h3>Temperature Range: How Cold You Can Go</h3>The CentriVap's refrigeration reaches as low as -10°C; the SRF110 bottoms out at -4°C. Both units heat up to +100°C. That six-degree gap on the cold end isn't dramatic on paper, but for the most heat-labile peptides and enzymes, the lower floor gives operators more margin before a sample is at risk — particularly during longer runs where evaporative cooling has more time to compound any thermal load on the sample.<h3>Vortex Speed and Mechanical Flexibility</h3>The CentriVap offers an adjustable vortex range from 500 to 1,800 rpm, while the SRF110 runs up to 1,725 rpm. The CentriVap's lower floor is the more useful distinction here — fragile, large, or shear-sensitive samples (think intact proteins or larger peptide constructs) sometimes need to run at reduced rotor speed to avoid mechanical stress, and the CentriVap gives operators that headroom on both ends rather than just a ceiling.<h3>Lid Material: Visibility vs. Durability</h3>The Refrigerated CentriVap uses a glass lid, letting operators see into the chamber during a run. The SRF110 uses an epoxy-coated aluminum lid, which trades visibility for added durability. For labs running visually distinct sample batches — colored buffers, multiple project codes, HPLC fractions pulled at different time points — the ability to glance at the chamber without interrupting a run has real workflow value, especially in a core facility setting where one instrument serves multiple research groups.<h3>What This Means for Core Facilities</h3>Shared instrumentation cores feel throughput and cold-temperature constraints differently than a single-PI lab does. A<a target="_blank" rel="noopener noreferrer" href="https://blog.organomation.com/blog/an-appreciation-for-academic-core-labs"> core running samples from multiple research groups </a>— some doing routine RNA cleanup, others running heat-labile peptide fractions from an HPLC purification step — needs an instrument that won't bottleneck on either axis. The CentriVap's combination of higher per-run capacity and a lower refrigeration floor gives a shared facility more room to serve mixed workloads without forcing every group onto the same conservative settings a less flexible unit would require.<h3>Built for the Same Footprint</h3>Both units are sized for fume hood placement, with the CentriVap measuring 15.0 x 27.2 x 13.9 inches against the SRF110's 16.62 x 25 x 13.75 inches — close enough that floor planning isn't a deciding factor either way. Both carry standard one-year warranties.<h3>The Bottom Line</h3>For labs concentrating proteins, RNA, enzymes, or peptide fractions at scale — particularly anyone supporting peptide therapeutic development, where production capacity is already the limiting factor industry-wide — the Labconco Refrigerated CentriVap's combination of higher throughput, lower cold-temperature floor, and lower price makes it the stronger fit. The SRF110 remains a capable option for labs with smaller batch sizes already standardized on Thermo Fisher's modular vacuum ecosystem.Organomation distributes the full Labconco CentriVap line, including the Refrigerated and Refrigerated Pro models. Contact our team at sales@organomation.com to talk through rotor configuration, cold trap pairing, and throughput planning for your lab.&nbsp;<blockquote><h5><a target="_blank" rel="noopener noreferrer" href="https://explore.organomation.com/labconco-refrigerated-centrivap-vs-thermo-fisher-refrigerated-speedvac">Download the full comparison with pricing here!</a></h5></blockquote>

Refrigerated SpeedVac SRF110 vs. CentriVap - Why Sample Capacity Matters More Than Ever for Peptide and Protein Labs

Article

Product

Environment

Science and research

RECETOX (Research Centre for Toxic Compounds in the Environment) is an independent department of the Faculty of Science of Masaryk University in Brno, which has been established in 1983. RECETOX is focused on the research and education in cross-cutting area of Environment and Health. It addresses interactions among chemicals, environment, and biological systems, including consequences at local, regional, and global levels.

RECETOX - Centrum pro výzkum toxických látek v prostředí

Since its establishment in 2011, CEITEC has quickly developed into a cutting-edge infrastructure for research which performs highly alongside the best institutes in Europe. Among the main priorities of CEITEC are the promotion of a motivating and dynamic international scientific environment, the provision of state-of-the-art research infrastructure, and the policy of open communication and equal opportunities.

CEITEC

Organomation, founded in 1959, designs and manufactures high-quality nitrogen evaporators and extraction systems. Known for innovation and durability, their lab instruments are used globally for efficient sample preparation with strong customer support.

Organomation

Phenomenex Luna Omega PS C18 HPLC Columns

Luna Omega PS C18 is a unique mixed interaction stationary phase that provides incredibly useful polar and non-polar retention. 

Improve Peak Shape for Bases Without the HeadacheLuna Omega PS C18 is a unique mixed interaction stationary phase that provides incredibly useful polar and non-polar retention. The surface of the PS C18 contains a positive charge which aids in the retention of acidic compounds and provides better peak shape for bases through ionic interactions, while the C18 ligand promotes general reversed phase retention. This mixed-mode selectivity allows for greater separation between compounds with varying functional groups.<ul><li>Compatible with All Analytical HPLC/UHPLC Systems</li><li>Fully Scalable Particle Size UHPLC HPLC Preparative</li><li>Charged Surface C18 that is 100 % Aqueous Stable</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Luna_Omega_PS_C18_HPLC_Column_bf5cf29276.webp" alt="Phenomenex: Luna Omega PS C18 HPLC Column" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Luna_Omega_PS_C18_HPLC_Column_bf5cf29276.webp 245w," sizes="100vw" width="500" height="150"><ul><li>Carbon Load: null %, 11.0 %</li><li>Particle Size: 1.6, 3, 5</li><li>Recommended Use: Positive surface C18 phase for HPLC and UHPLC separations of hydrophobic/basic compounds</li></ul><h4>A C18 With a Positive Twist</h4>Luna Omega PS C18 has been fine tuned and manufactured by Phenomenex to provide a mixed selectivity that is highly useful for method development involving either combinations of polar and nonpolar compounds, or just one single compound class with small changes in functional groups.<h4>Enhanced Selectivity and Polar Retention</h4>With its positive surface (PS) the Luna Omega PS C18 provides valuable increase in retention of acids through ionic/polar interactions. In addition, the C18 ligand also stimulates hydrophobic retention that greatly promotes increased resolution between analytes of interest.<h4>Think Outside the Traditional C18 Selectivity</h4>Traditional C18 phases may not always be the best option. A HPLC and UHPLC column that has both polar and hydrophobic versatility allows for great method development flexibility.<h4>Better Peak Shape for Bases</h4>While traditional alkyl phases are prone to show tailing for basic compounds because of secondary interactions occurring at the silica surface, the surface of the Luna Omega PS C18 was designed with positive charges that serve to repel strong basic species and consistently display sharp peak shape.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Better_Peak_Shape_for_Bases_Comparison_of_Luna_Omega_PS_C18_with_C18_Columns_from_other_manufacturers_3667109291.jpg" alt="Phenomenex: Better Peak Shape for Bases (Comparison of Luna Omega PS C18 with C18 Columns from other manufacturers)" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Better_Peak_Shape_for_Bases_Comparison_of_Luna_Omega_PS_C18_with_C18_Columns_from_other_manufacturers_3667109291.jpg 245w," sizes="100vw" width="905" height="485"><blockquote>Stationary phase Luna Omega PS C18 is provided in these column types: analytical, minibore, midbore and preparative</blockquote><h5>Luna Omega PS C18 HPLC Minibore, MidBore and Analytical Columns are available with these parameters:</h5>Minibore Columns<ul><li>Column length (mm): 30, 50, 100, 150</li><li>Column ID (mm): 2.1</li><li>Particle size (µm): 1.6; 3, 5</li></ul>MidBore Columns<ul><li>Column length (mm): 50, 100, 150</li><li>Column ID (mm): 3</li><li>Particle size (µm): 3, 5</li></ul>Analytical Columns<ul><li>Column length (mm): 50, 100, 150, 250</li><li>Column ID (mm): 4.6</li><li>Particle size (µm): 3, 5</li></ul><h3>Phenomenex Luna Omega HPLC/UHPLC Columns</h3>The cutting edge thermally modified Luna Omega particle delivers high efficiency, ruggedness, reproducibility, and dependability for a wide range of chromatographic analyses. Luna Omega HPLC and UHPLC columns are built upon more then 20 years of applied knowledge, invention, and customer experience in the manufacture and packing of LC columns. The particle’s novel design and proprietary manufacturing process results in greater particle inertness, a stronger particle morphology, and more consistent porosity.<ul><li>Greater separation muscle and retention</li><li>Consistent porous structure and elimination of micropores</li><li>Extreme ruggedness and reproducibility</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Thermal_modified_pore_structure_of_Luna_Omega_Column_particles_37138bb135.jpg" alt="Phenomenex:Thermal modified pore structure of Luna Omega Column particles" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Thermal_modified_pore_structure_of_Luna_Omega_Column_particles_37138bb135.jpg 245w," sizes="100vw" width="1257" height="369"><h3>Explore Luna Omega Columns</h3><h5>Astounding Performance</h5>The undeniably high efficiency levels found in each Luna Omega UHPLC column provide you with the potential of huge gains in method performance. While traditional silica and hybrid fully porous particles claim high performance, when compared to Luna Omega 1.6 μm, they drastically fall short and prevent UHPLC scientists from reaching their UHPLC potential.<h5>Separation Muscle</h5>Our industry leading bonding technologies in conjunction with high efficiency levels ensure excellent stationary phase coverage and improved separation power. Now, with Luna Omega 1.6 μm, you can turn difficult separations into resolution achievements.<h5>Inert Foundation</h5>Luna Omega UHPLC columns contain a unique silica modified using a proprietary, post-synthetic thermal treatment process to provide extraordinary mechanical strength and significantly greater inertness than traditional fully porous and hybrid materials. This greatly minimizes secondary interactions that negatively affect peak shape, allowing for greater method accuracy.<h5>Consistent Results</h5>Batch-to-batch and column-to-column, Luna® Omega media and columns are designed to be consistent and incredibly accurate tools for your analysis. Each batch and column are quality tested to ensure dependability and reproducibility.

Phenomenex Luna Omega Sugar HPLC Columns

Luna Omega SUGAR combines thermally modified porous particles with a HILIC phase for excellent retention and selectivity of polar compounds.

Luna Omega SUGAR breaks ground as it combines the performance benefits of thermally modified fully porous particles with a novel HILIC stationary phase that excels at polar compound retention and selectivity.<ul><li>Improved carbohydrate retention and separation with multifunctional selectivity that contains amide/amino stationary phase and polar endcapping</li><li>Enhanced lifetime with highly robust and efficient thermally modified fully porous particle</li><li>QC tested for sugars to ensure reliable quality</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Luna_Omega_Sugar_Column_b9d9c7dde1.jpg" alt="Phenomenex: Luna Omega Sugar Column" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Luna_Omega_Sugar_Column_b9d9c7dde1.jpg 245w," sizes="100vw" width="500" height="150"><ul><li>Carbon Load: null %</li><li>Particle Size: 3</li><li>Recommended Use: Polyamide/amine phase for reversed phase and HILIC mode for the separation of polyols/sugars</li></ul><h4>Exceptional Retention and Separation</h4>Luna Omega SUGAR greatly improves upon the retention and separation capabilities of traditional fully porous, core-shell, and hybrid materials, while also allowing for greater peak response! All this while also ensuring that customers do not need to depend on buffers or ion‑pair agents to get adequate separation at the cost of losing signal.<h3>Phenomenex Luna Omega HPLC/UHPLC Columns</h3>The cutting edge thermally modified Luna Omega particle delivers high efficiency, ruggedness, reproducibility, and dependability for a wide range of chromatographic analyses. Luna Omega HPLC and UHPLC columns are built upon more then 20 years of applied knowledge, invention, and customer experience in the manufacture and packing of LC columns. The particle’s novel design and proprietary manufacturing process results in greater particle inertness, a stronger particle morphology, and more consistent porosity.<ul><li>Greater separation muscle and retention</li><li>Consistent porous structure and elimination of micropores</li><li>Extreme ruggedness and reproducibility</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Thermal_modified_pore_structure_of_Luna_Omega_Column_particles_37138bb135.jpg" alt="Phenomenex:Thermal modified pore structure of Luna Omega Column particles" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Thermal_modified_pore_structure_of_Luna_Omega_Column_particles_37138bb135.jpg 245w," sizes="100vw" width="1257" height="369"><h3>Explore Luna Omega Columns</h3><h5>Astounding Performance</h5>The undeniably high efficiency levels found in each Luna Omega UHPLC column provide you with the potential of huge gains in method performance. While traditional silica and hybrid fully porous particles claim high performance, when compared to Luna Omega 1.6 μm, they drastically fall short and prevent UHPLC scientists from reaching their UHPLC potential.<h5>Separation Muscle</h5>Our industry leading bonding technologies in conjunction with high efficiency levels ensure excellent stationary phase coverage and improved separation power. Now, with Luna Omega 1.6 μm, you can turn difficult separations into resolution achievements.<h5>Inert Foundation</h5>Luna Omega UHPLC columns contain a unique silica modified using a proprietary, post-synthetic thermal treatment process to provide extraordinary mechanical strength and significantly greater inertness than traditional fully porous and hybrid materials. This greatly minimizes secondary interactions that negatively affect peak shape, allowing for greater method accuracy.<h5>Consistent Results</h5>Batch-to-batch and column-to-column, Luna® Omega media and columns are designed to be consistent and incredibly accurate tools for your analysis. Each batch and column are quality tested to ensure dependability and reproducibility.

Phenomenex Biozen SEC-3 LC columns

High inertness and particle consistency of both Biozen™ SEC columns drives greater reproducibility from injection-to-injection. 

High inertness and particle consistency of both Biozen™ SEC columns drives greater reproducibility from injection-to-injection. Combine this with the bioinert BioTi hardware and good aggregate recovery is no longer something that you’re missing out on.Biozen SEC columns provide:<ul><li>High efficiency on both HPLC and UHPLC</li><li>Extreme inertness and robustness</li><li>Finely tuned high and low MS separation windows</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Biozen_SEC_3_3a6e232271.webp" alt="Phenomenex: Biozen SEC-3" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Biozen_SEC_3_3a6e232271.webp 245w," sizes="100vw" width="500" height="150"><ul><li>Separation Mode: Gel Filtration Chromatography (GFC)</li><li>Particle Size: 1.8</li><li>Recommended Use: High molecular weight (HMW) separation range of 10 k – 700 kDa</li></ul><h3>Phenomenex Biozen Biologics LC Columns</h3>With a new titanium BioTi™ biocompatible hardware to minimize priming, four particle platforms for optimal versatility and nine particle chemistries to maximize selectivity and sensitivity, Biozen UHPLC/HPLC columns for protein analysis are seamlessly designed to bring peace of mind to your analysis of biologics through:<ul><li>Charge Variant Analysis</li><li>Aggregate Analysis</li><li>Peptide Mapping</li><li>Intact Mass Analysis</li><li>Intact and Subunit Analysis</li><li>Glycan Analysis</li><li>Peptide Quantitation</li><li>Drug Antibody Ratio (DAR)</li><li>Oligonucleotide Characterization</li></ul><h3>Biocompatible Flow Path with BioTi™ Hardware</h3>Keep your mind at ease knowing that we’ve minimized the need for priming with a new titanium infused biocompatible hardware and frit that doesn’t interfere with protein or peptide integrity!<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Bio_Ti_Hardware_991fb53395.jpg" alt="Phenomenex: BioTi Hardware" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Bio_Ti_Hardware_991fb53395.jpg 245w," sizes="100vw" width="1378" height="426"><h3>4 Advanced Particle Platforms</h3>All four of the Biozen particle platforms were individually designed and built by Phenomenex to take advantage of integral levels of performance, ruggedness, and reproducibility for protein characterization applications. Individually, each platform differs in the proprietary processing techniques used to control particle size and morphology.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Advanced_Particle_Platforms_a0959aca03.jpg" alt="Phenomenex: Advanced Particle Platforms" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Advanced_Particle_Platforms_a0959aca03.jpg 245w," sizes="100vw" width="1439" height="868">

Phenomenex Biozen SEC-2 LC columns

Biozen SEC columns are extremely inert, high density fully porous particle with high efficiency and low molecular weight separation range.

Biozen SEC columns are extremely inert, high density fully porous particle with high efficiency and low molecular weight (LMW) separation range of 1 k – 450 kDa.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Biozen_SEC_3_3a6e232271.webp" alt="Phenomenex: Biozen SEC-2" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Biozen_SEC_3_3a6e232271.webp 245w," sizes="100vw" width="500" height="150"><ul><li>Separation Mode: Gel Filtration Chromatography (GFC)</li><li>Particle Size: 1.8</li><li>Recommended Use: Low molecular weight (LMW) separation range of 1 k – 450 kDa</li></ul><h3>Phenomenex Biozen Biologics LC Columns</h3>With a new titanium BioTi™ biocompatible hardware to minimize priming, four particle platforms for optimal versatility and nine particle chemistries to maximize selectivity and sensitivity, Biozen UHPLC/HPLC columns for protein analysis are seamlessly designed to bring peace of mind to your analysis of biologics through:<ul><li>Charge Variant Analysis</li><li>Aggregate Analysis</li><li>Peptide Mapping</li><li>Intact Mass Analysis</li><li>Intact and Subunit Analysis</li><li>Glycan Analysis</li><li>Peptide Quantitation</li><li>Drug Antibody Ratio (DAR)</li><li>Oligonucleotide Characterization</li></ul><h3>Biocompatible Flow Path with BioTi™ Hardware</h3>Keep your mind at ease knowing that we’ve minimized the need for priming with a new titanium infused biocompatible hardware and frit that doesn’t interfere with protein or peptide integrity!<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Bio_Ti_Hardware_991fb53395.jpg" alt="Phenomenex: BioTi Hardware" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Bio_Ti_Hardware_991fb53395.jpg 245w," sizes="100vw" width="1378" height="426"><h3>4 Advanced Particle Platforms</h3>All four of the Biozen particle platforms were individually designed and built by Phenomenex to take advantage of integral levels of performance, ruggedness, and reproducibility for protein characterization applications. Individually, each platform differs in the proprietary processing techniques used to control particle size and morphology.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Advanced_Particle_Platforms_a0959aca03.jpg" alt="Phenomenex: Advanced Particle Platforms" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Advanced_Particle_Platforms_a0959aca03.jpg 245w," sizes="100vw" width="1439" height="868">

Phenomenex Biozen dSEC-2 LC columns

Biozen dSEC columns use low-pore silica with a proprietary hydrophilic diol bond to prevent silica-protein interactions.

Advanced SEC Silica Particle Technology and Surface Chemistry for Characterizing BiomoleculesThe Biozen dSEC columns are packed with low pore volume silica coupled with a proprietary hydrophilic diol-type bonded surface chemistry that prevents the silica surface from interacting with protein samples.<ul><li>Exceptionally Robust, Pore Controlled SEC Particle</li><li>Extreme Stability and Exceptional Lifetime</li><li>Reproducible Separations</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Biozen_dsec_63af9af237.webp" alt="Phenomenex: Biozen-dSEC-2" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Biozen_dsec_63af9af237.webp 245w," sizes="100vw" width="500" height="150"><ul><li>Separation Mode: Gel Filtration Chromatography (GFC)</li><li>Pore size: 200</li><li>Particle Size: 1.8, 3</li><li>Recommended Use: Analysis of monoclonal antibodies, biosimilars and other biomolecules by using specific molecular weights with improved column lifetimes and recovery</li></ul><h4>Biozen SEC Proprietary Silica Particle Technology</h4>The Biozen dSEC columns are packed with low pore volume silica coupled with a proprietary hydrophilic diol-type bonded surface chemistry that prevents the silica surface from interacting with protein samples.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Biozen_SEC_Proprietary_Silica_Particle_Technology_502218b910.jpg" alt="Phenomenex: Biozen SEC Proprietary Silica Particle Technology" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Biozen_SEC_Proprietary_Silica_Particle_Technology_502218b910.jpg 245w," sizes="100vw" width="1448" height="469"><h4>Improved Column Lifetime and Performance Stability</h4>Phenomenex’s optimized SEC column loading technology has significantly improved the overall packing density and silica distribution of the columns leading to improved chromatographic lifetime and stability.<h4>New Standard for Platform SEC Methods</h4>Whether IgG2 or IgG4 isotypes, bispecifics, or Fc-Fusions, dSEC-2 provides excellent separation and sample recovery for many different classes of antibodies and related recombinant proteins.<h3>Phenomenex Biozen Biologics LC Columns</h3>With a new titanium BioTi™ biocompatible hardware to minimize priming, four particle platforms for optimal versatility and nine particle chemistries to maximize selectivity and sensitivity, Biozen UHPLC/HPLC columns for protein analysis are seamlessly designed to bring peace of mind to your analysis of biologics through:<ul><li>Charge Variant Analysis</li><li>Aggregate Analysis</li><li>Peptide Mapping</li><li>Intact Mass Analysis</li><li>Intact and Subunit Analysis</li><li>Glycan Analysis</li><li>Peptide Quantitation</li><li>Drug Antibody Ratio (DAR)</li><li>Oligonucleotide Characterization</li></ul><h3>Biocompatible Flow Path with BioTi™ Hardware</h3>Keep your mind at ease knowing that we’ve minimized the need for priming with a new titanium infused biocompatible hardware and frit that doesn’t interfere with protein or peptide integrity!<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Bio_Ti_Hardware_991fb53395.jpg" alt="Phenomenex: BioTi Hardware" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Bio_Ti_Hardware_991fb53395.jpg 245w," sizes="100vw" width="1378" height="426"><h3>4 Advanced Particle Platforms</h3>All four of the Biozen particle platforms were individually designed and built by Phenomenex to take advantage of integral levels of performance, ruggedness, and reproducibility for protein characterization applications. Individually, each platform differs in the proprietary processing techniques used to control particle size and morphology.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Advanced_Particle_Platforms_a0959aca03.jpg" alt="Phenomenex: Advanced Particle Platforms" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Advanced_Particle_Platforms_a0959aca03.jpg 245w," sizes="100vw" width="1439" height="868">

Phenomenex Biozen dSEC-7 LC columns

dSEC-7 optimizes dimensions to save sample, speed up runs, and enhance resolution for AAVs and large biomolecule separations.

AAV and Large Biomolecule Aggregate Analysis​Biozen dSEC-7 columns are packed with 700 Å large pore silica coupled with a proprietary hydrophilic diol-type bonded surface chemistry that ensures silica surface interactions are mitigated. Designed with optimized column dimensions, dSEC-7 conserves valuable sample consumption, facilitates faster run times, and maximizes resolution for AAVs and large biomolecule separations.Robust and reliable aggregate analysis:<ul><li>Baseline resolution of monomer/aggregate species through 700 Å pore size</li><li>Reduction in sample consumption by up to 90 % compared to traditional SEC columns</li><li>Reduction in method times by up to 50 % when compared to traditional SEC columns</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Biozen_dsec_63af9af237.webp" alt="Phenomenex: Biozen-dSEC-7" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Biozen_dsec_63af9af237.webp 245w," sizes="100vw" width="500" height="150"><ul><li>Separation Mode: Gel Filtration Chromatography (GFC)</li><li>Pore size: 700</li><li>Recommended Use: Aggregate analysis of AAVs and other large biomolecules using specific molecular weights that conserves sample consumption, facilitates faster run times, and maximizes resolution.</li></ul><h4>An SEC Column for AAV Aggregate Analysis</h4><figure class="image"><img style="aspect-ratio:668/575;" src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Biozen_d_SEC_7_Column_b307c4217d.jpg" alt="Phenomenex: Biozen dSEC-7 Column" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Biozen_d_SEC_7_Column_b307c4217d.jpg 182w," sizes="100vw" width="668" height="575"></figure><h4>Biozen dSEC-7 Features</h4><h5>Improved Loading</h5><ul><li>dSEC-7 addresses the challenge of aggregate analysis by offering accurate detection and separation with injections as low as 0.5 µL. Unlike traditional methods that demand large sample volumes, dSEC-7 conserves valuable samples, allowing for replicate analyses and ensuring availability for other CQA tests.</li></ul><h5>Mobile Phase Flexibility</h5><ul><li>dSEC-7’s particle properties facilitate robust separation of monomer from aggregate species, regardless of which mobile phase best suits your sample. This ensures reproducible results while accommodating unique sample demands, easing the burden of method condition optimization during development.</li></ul><h5>Serotype Versatility</h5><ul><li>With its robust performance and 700 Å pore size, dSEC-7 effectively resolves monomer from aggregate peaks across various AAV serotypes. This capability is crucial for evaluating appropriate serotype candidates, each varying in its unique tissue and cell tropisms, to ensure desired therapeutic outcomes are achieved.</li></ul><h5>Instrument Agnostic Performance</h5><ul><li>Despite differences in dwell volume and dispersion across various sites and departments, dSEC-7 consistently delivers robust and reproducible performance across commercially available LC instrumentation. This ensures reliable results regardless of variations in equipment, setup, or location.</li></ul><h5>Outperforms Trending Solutions</h5><ul><li>dSEC-7 excels in providing superior resolution over market alternatives, particularly when characterizing higher-level aggregates in AAV analysis. Unlike current market solutions with insufficient particle pore size, dSEC-7 ensures accurate and reproducible separation of AAV monomer from aggregates.</li></ul><h5>Enhanced Detector Flexibility</h5><ul><li>Conquer sample limitations using SEC-FLR for heightened sensitivity, SEC-MALS for precise molecular weight determination, or SEC-UV for routine analysis. Achieving comprehensive AAV characterization insights by transferring methods across detector technologies with unique benefits is now seamless.</li></ul><h3>Phenomenex Biozen Biologics LC Columns</h3>With a new titanium BioTi™ biocompatible hardware to minimize priming, four particle platforms for optimal versatility and nine particle chemistries to maximize selectivity and sensitivity, Biozen UHPLC/HPLC columns for protein analysis are seamlessly designed to bring peace of mind to your analysis of biologics through:<ul><li>Charge Variant Analysis</li><li>Aggregate Analysis</li><li>Peptide Mapping</li><li>Intact Mass Analysis</li><li>Intact and Subunit Analysis</li><li>Glycan Analysis</li><li>Peptide Quantitation</li><li>Drug Antibody Ratio (DAR)</li><li>Oligonucleotide Characterization</li></ul><h3>Biocompatible Flow Path with BioTi™ Hardware</h3>Keep your mind at ease knowing that we’ve minimized the need for priming with a new titanium infused biocompatible hardware and frit that doesn’t interfere with protein or peptide integrity!<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Bio_Ti_Hardware_991fb53395.jpg" alt="Phenomenex: BioTi Hardware" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Bio_Ti_Hardware_991fb53395.jpg 245w," sizes="100vw" width="1378" height="426"><h3>4 Advanced Particle Platforms</h3>All four of the Biozen particle platforms were individually designed and built by Phenomenex to take advantage of integral levels of performance, ruggedness, and reproducibility for protein characterization applications. Individually, each platform differs in the proprietary processing techniques used to control particle size and morphology.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Advanced_Particle_Platforms_a0959aca03.jpg" alt="Phenomenex: Advanced Particle Platforms" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Advanced_Particle_Platforms_a0959aca03.jpg 245w," sizes="100vw" width="1439" height="868">

Phenomenex Biozen WidePore C4 LC columns

Biozen WidePore C4 column contains skillfully manufactured large pore core shell particles that provide narrower, taller peaks in conjunction with higher resolution.

Impurity profiling and characterization of intact biologic fragments is a challenging undertaking because of the need to identify very small differences between variants. Both Biozen Intact columns contain skillfully manufactured large pore core shell particles that provide narrower, taller peaks in conjunction with higher resolution between the target HC/LC, Fc/Fab, or isoforms.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Biozen_Widepore_C4_HPLC_Column_56dfa53fcb.webp" alt="Phenomenex: Biozen Widepore C4 HPLC Column" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Biozen_Widepore_C4_HPLC_Column_56dfa53fcb.webp 245w," sizes="100vw" width="500" height="150"><ul><li>Separation Mode: Reversed Phase</li><li>Particle size: 2.6</li><li>Recommended Use: Optimal particle and pore size morphology for high reproducibility and resolution for intact and subunit analysis</li></ul><h3>Phenomenex Biozen Biologics LC Columns</h3>With a new titanium BioTi™ biocompatible hardware to minimize priming, four particle platforms for optimal versatility and nine particle chemistries to maximize selectivity and sensitivity, Biozen UHPLC/HPLC columns for protein analysis are seamlessly designed to bring peace of mind to your analysis of biologics through:<ul><li>Charge Variant Analysis</li><li>Aggregate Analysis</li><li>Peptide Mapping</li><li>Intact Mass Analysis</li><li>Intact and Subunit Analysis</li><li>Glycan Analysis</li><li>Peptide Quantitation</li><li>Drug Antibody Ratio (DAR)</li><li>Oligonucleotide Characterization</li></ul><h3>Biocompatible Flow Path with BioTi™ Hardware</h3>Keep your mind at ease knowing that we’ve minimized the need for priming with a new titanium infused biocompatible hardware and frit that doesn’t interfere with protein or peptide integrity!<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Bio_Ti_Hardware_991fb53395.jpg" alt="Phenomenex: BioTi Hardware" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Bio_Ti_Hardware_991fb53395.jpg 245w," sizes="100vw" width="1378" height="426"><h3>4 Advanced Particle Platforms</h3>All four of the Biozen particle platforms were individually designed and built by Phenomenex to take advantage of integral levels of performance, ruggedness, and reproducibility for protein characterization applications. Individually, each platform differs in the proprietary processing techniques used to control particle size and morphology.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Advanced_Particle_Platforms_a0959aca03.jpg" alt="Phenomenex: Advanced Particle Platforms" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Advanced_Particle_Platforms_a0959aca03.jpg 245w," sizes="100vw" width="1439" height="868">

Phenomenex Peptide-PS-C18 LC columns

Biozen Peptide PS-C18 is a mixed-mode phase that combines a positively charged surface ligand and a C18 ligand.

Biozen Peptide PS-C18 is a mixed-mode phase that combines a positively charged surface ligand and a C18 ligand. The result is an HPLC column phase that provides excellent retention for biologics.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Biozen_Peptide_PS_C18_HPLC_Column_e114259469.webp" alt="Phenomenex: Biozen Peptide-PS-C18 HPLC Column" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Biozen_Peptide_PS_C18_HPLC_Column_e114259469.webp 245w," sizes="100vw" width="500" height="150"><ul><li>Separation Mode: Reversed Phase</li><li>Pore size: 100</li><li>Particle size: 1.6, 3</li><li>Recommended Use: Excellent retention of peptides for both peptide mapping and peptide quantitation applications</li></ul><h3>Phenomenex Biozen Biologics LC Columns</h3>With a new titanium BioTi™ biocompatible hardware to minimize priming, four particle platforms for optimal versatility and nine particle chemistries to maximize selectivity and sensitivity, Biozen UHPLC/HPLC columns for protein analysis are seamlessly designed to bring peace of mind to your analysis of biologics through:<ul><li>Charge Variant Analysis</li><li>Aggregate Analysis</li><li>Peptide Mapping</li><li>Intact Mass Analysis</li><li>Intact and Subunit Analysis</li><li>Glycan Analysis</li><li>Peptide Quantitation</li><li>Drug Antibody Ratio (DAR)</li><li>Oligonucleotide Characterization</li></ul><h3>Biocompatible Flow Path with BioTi™ Hardware</h3>Keep your mind at ease knowing that we’ve minimized the need for priming with a new titanium infused biocompatible hardware and frit that doesn’t interfere with protein or peptide integrity!<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Bio_Ti_Hardware_991fb53395.jpg" alt="Phenomenex: BioTi Hardware" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Bio_Ti_Hardware_991fb53395.jpg 245w," sizes="100vw" width="1378" height="426"><h3>4 Advanced Particle Platforms</h3>All four of the Biozen particle platforms were individually designed and built by Phenomenex to take advantage of integral levels of performance, ruggedness, and reproducibility for protein characterization applications. Individually, each platform differs in the proprietary processing techniques used to control particle size and morphology.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Advanced_Particle_Platforms_a0959aca03.jpg" alt="Phenomenex: Advanced Particle Platforms" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Advanced_Particle_Platforms_a0959aca03.jpg 245w," sizes="100vw" width="1439" height="868">

Phenomenex Intact XB-C8 LC columns

Biozen Intact XB-C8 column contains skillfully manufactured large pore core shell particles that provide narrower, taller peaks in conjunction with higher resolution.

Impurity profiling and characterization of intact biologic fragments is a challenging undertaking because of the need to identify very small differences between variants. Both bioZen Intact columns contain skillfully manufactured large pore core-shell particles that provide narrower, taller peaks in conjunction with higher resolution between the target HC/LC, Fc/Fab, or isoforms.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Biozen_Intact_XB_C8_HPLC_Column_c2159e0847.webp" alt="Phenomenex: Biozen Intact XB-C8 HPLC Column" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Biozen_Intact_XB_C8_HPLC_Column_c2159e0847.webp 245w," sizes="100vw" width="500" height="150"><ul><li>Separation Mode: Reversed Phase</li><li>Particle size: 3.6</li><li>Recommended Use: Fast separation of intact and subunit separation with hydrophobic selectivity</li></ul><h3>Phenomenex Biozen Biologics LC Columns</h3>With a new titanium BioTi™ biocompatible hardware to minimize priming, four particle platforms for optimal versatility and nine particle chemistries to maximize selectivity and sensitivity, Biozen UHPLC/HPLC columns for protein analysis are seamlessly designed to bring peace of mind to your analysis of biologics through:<ul><li>Charge Variant Analysis</li><li>Aggregate Analysis</li><li>Peptide Mapping</li><li>Intact Mass Analysis</li><li>Intact and Subunit Analysis</li><li>Glycan Analysis</li><li>Peptide Quantitation</li><li>Drug Antibody Ratio (DAR)</li><li>Oligonucleotide Characterization</li></ul><h3>Biocompatible Flow Path with BioTi™ Hardware</h3>Keep your mind at ease knowing that we’ve minimized the need for priming with a new titanium infused biocompatible hardware and frit that doesn’t interfere with protein or peptide integrity!<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Bio_Ti_Hardware_991fb53395.jpg" alt="Phenomenex: BioTi Hardware" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Bio_Ti_Hardware_991fb53395.jpg 245w," sizes="100vw" width="1378" height="426"><h3>4 Advanced Particle Platforms</h3>All four of the Biozen particle platforms were individually designed and built by Phenomenex to take advantage of integral levels of performance, ruggedness, and reproducibility for protein characterization applications. Individually, each platform differs in the proprietary processing techniques used to control particle size and morphology.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Advanced_Particle_Platforms_a0959aca03.jpg" alt="Phenomenex: Advanced Particle Platforms" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Advanced_Particle_Platforms_a0959aca03.jpg 245w," sizes="100vw" width="1439" height="868">

Phenomenex Biozen Peptide-XB-C18 LC columns

Biozen Peptide XB-C18 uses core-shell particles for fast elution, sharper peaks, better peak capacity, and higher sensitivity.

Digested mAbs or ADCs typically include a large body of compounds which are crucial to understanding post translation modifications. So we designed our Biozen™ Peptide columns to offer highly useful and unique retention profiles. Biozen Peptide XB-C18 allows for fast and effective elution windows by utilizing core-shell particles to gain sharper peaks, better peak capacities, and overall higher sensitivity.Biozen Peptide columns provide:<ul><li>Unique retention profiles</li><li>Greater peak coverage</li><li>High efficiency on both HPLC and UHPLC</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Bio_Zen_Peptide_XB_C18_cd462e9b72.jpg" alt="Phenomenex: BioZen Peptide-XB-C18" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Bio_Zen_Peptide_XB_C18_cd462e9b72.jpg 245w," sizes="100vw" width="839" height="314"><ul><li>Separation Mode: Reversed Phase</li><li>Pore size: 100</li><li>Particle size: 1.7, 2.6, 5</li><li>Recommended Use: Overall retention of both acidic and basic peptides for both peptide mapping and peptide quantitation applications</li></ul><h3>Phenomenex Biozen Biologics LC Columns</h3>With a new titanium BioTi™ biocompatible hardware to minimize priming, four particle platforms for optimal versatility and nine particle chemistries to maximize selectivity and sensitivity, Biozen UHPLC/HPLC columns for protein analysis are seamlessly designed to bring peace of mind to your analysis of biologics through:<ul><li>Charge Variant Analysis</li><li>Aggregate Analysis</li><li>Peptide Mapping</li><li>Intact Mass Analysis</li><li>Intact and Subunit Analysis</li><li>Glycan Analysis</li><li>Peptide Quantitation</li><li>Drug Antibody Ratio (DAR)</li><li>Oligonucleotide Characterization</li></ul><h3>Biocompatible Flow Path with BioTi™ Hardware</h3>Keep your mind at ease knowing that we’ve minimized the need for priming with a new titanium infused biocompatible hardware and frit that doesn’t interfere with protein or peptide integrity!<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Bio_Ti_Hardware_991fb53395.jpg" alt="Phenomenex: BioTi Hardware" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Bio_Ti_Hardware_991fb53395.jpg 245w," sizes="100vw" width="1378" height="426"><h3>4 Advanced Particle Platforms</h3>All four of the Biozen particle platforms were individually designed and built by Phenomenex to take advantage of integral levels of performance, ruggedness, and reproducibility for protein characterization applications. Individually, each platform differs in the proprietary processing techniques used to control particle size and morphology.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Phenomenex_Advanced_Particle_Platforms_a0959aca03.jpg" alt="Phenomenex: Advanced Particle Platforms" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Phenomenex_Advanced_Particle_Platforms_a0959aca03.jpg 245w," sizes="100vw" width="1439" height="868">

Products focused on LC columns distributed by Phenomenex - page 7

Related content

Refrigerated SpeedVac SRF110 vs. CentriVap - Why Sample Capacity Matters More Than Ever for Peptide and Protein Labs

What Attracts Molecules? A New Generation of a CEITEC Tool Makes the Forces Between Atoms Visible

Study reveals an unexpectedly large contribution to air pollution from soils