Taťána Gazárková is currently a&nbsp;postdoctoral fellow in the Laboratory of Antibiotic Resistance and Microbial Metabolomics. During her doctoral studies, she focused on chromatography and mass spectrometry. Recently, she was awarded second place in the “Sanofi Prize for Pharmacy 2026” competition.Taťána Gazárková is currently a&nbsp;postdoctoral fellow in the Laboratory of Antibiotic Resistance and Microbial Metabolomics. During her doctoral studies, she focused on chromatography and mass spectrometry. Recently, she was awarded second place in the “Sanofi Prize for Pharmacy 2026” competition, which is awarded by the French Embassy in the Czech Republic for her dissertation – Steroid Analysis Using Modern Chromatographic and Mass Spectrometry Techniques: From Fundamental Studies to Targeted Bioanalytical Applications (supervisor: Lucie Nováková, Charles University).&nbsp;<h5>What makes this field particularly exciting or unique in your view?</h5>What I&nbsp;enjoy about analytical chemistry is that, to a&nbsp;certain extent, it is a&nbsp;kind of detective work. You are often looking for ways to “make the invisible visible”. In other words, extract the information you are interested in from a&nbsp;complex sample and then interpret it correctly. What also appeals to me about bioanalytical chemistry is its interdisciplinary nature. It brings together analytical chemistry, biochemistry, biology and medicine, which means that you need to be able not only to translate a&nbsp;biological or clinical question into a&nbsp;measurable analytical experiment, but also to place the resulting data back into a&nbsp;broader biological context. This combination of different perspectives is probably what I&nbsp;enjoy most about the field. At the same time, there is still plenty of room for fundamental research, ranging from studying analytical techniques themselves and improving them to developing new methodological approaches.<h5>How did you end up at the <a target="_blank" rel="noopener noreferrer" href="https://mbu.cas.cz/en/research/laboratory-of-antibiotic-resistance-and-microbial-metabolomics">Laboratory of Antibiotic Resistance and Microbial Metabolomics</a>, and what project are you currently working on?</h5>I came to the Institute of Microbiology through a&nbsp;joint project between Dr Zdeněk Kameník and Assoc. Prof. Jan Bobek from the First Faculty of Medicine, Charles University. For me, it was also an opportunity to move from targeted analysis and the study of chromatographic techniques towards untargeted metabolomics and new biological questions.In the project, we are trying to identify new biologically active compounds that would be effective, particularly against pathogenic fungi. As a&nbsp;potential source of such compounds, we study streptomycetes, bacteria known for their ability to produce a&nbsp;wide range of biologically active compounds, including many antibiotics that are currently in clinical use. We focus on less-explored host-associated streptomycetes, in which we had already observed antifungal activity in previous experiments. We are especially interested in strains active against Candida albicans whose activity cannot be explained by the presence of a&nbsp;known bioactive compound. These strains may represent an interesting source of novel compounds. We then integrate the results of untargeted metabolomic analyses with genomic analyses, which allows us to obtain a&nbsp;more comprehensive view of the biosynthetic potential of selected strains.<h5>You also took part in this year’s Vědafest, a&nbsp;science outreach event for the public. What was it like?</h5>I already had some experience with science outreach through events such as Researchers’ Night and the Science Fair at my previous institution, but this year’s Vědafest was still new to me in some ways. This time, I&nbsp;was presenting a&nbsp;field that I&nbsp;myself had entered only relatively recently. It was therefore more challenging to find the right analogies and explain the essence of the topic in a&nbsp;way that was simple, yet precise and scientifically accurate. At the same time, that was exactly what made it inspiring. It forces you to look at your own work from a&nbsp;different perspective. What I&nbsp;enjoyed most was the spontaneity and curiosity of the children, who often came up with questions that would never even occur to an adult.<h5>What are the biggest challenges you face on your scientific journey, and what helps you overcome them?</h5>One of the greatest, but at the same time most interesting, challenges is, in my view, the uncertainty that is inseparably linked to research. For a&nbsp;long time, you often do not know whether you have taken the right direction in addressing a&nbsp;particular question or whether you will ultimately manage to find that figurative final piece of the puzzle. At the same time, this uncertainty is precisely what makes science exciting for me.Another major challenge, particularly in interdisciplinary projects, is communication. It is important from the very formulation of a&nbsp;hypothesis and the planning of experiments through to the interpretation of results, including negative ones, and placing them in a&nbsp;broader context. To some extent, every field has its own language, and finding a&nbsp;common understanding is not always straightforward. Personally, I&nbsp;find it very helpful to be able to discuss problems with colleagues on an ongoing basis, whether individually or during regular laboratory seminars. One of the major strengths of our current group is its interdisciplinary nature, which allows me to look at the same problem from several different perspectives. It is also important for me not to lose my curiosity, because that is ultimately what leads us to ask further questions.<h5>What are your plans after completing your PhD?</h5>After finishing my PhD, I&nbsp;decided that I&nbsp;do not need to have everything that comes next precisely mapped out straight away. I&nbsp;would like to keep different options open for a&nbsp;while and continue building on my experience in analytical chemistry, while at the same time connecting it with other areas that have a&nbsp;biological or medical relevance. I&nbsp;believe that we can keep learning throughout our lives, so I&nbsp;am quite curious to see where the next stage of my journey will take me.Thank you for the interview!

Interview: What Drew Postdoc Taťána Gazárková to Analytical Chemistry

Per- and polyfluoroalkyl substances (PFAS) have earned the moniker "forever chemicals" due to their extreme persistence in the environment. Their detection is crucial for protecting public health and the environment as these synthetic compounds continue to pose significant challenges worldwide. This comprehensive exploration examines why PFAS detection matters, current detection methods, and future directions in addressing PFAS contamination.<h3>Understanding PFAS and Their Health Impacts</h3>PFAS are a class of synthetic organic compounds with diverse structures, properties, and uses. Despite their diversity, all PFAS contain perfluoroalkyl moieties that are extremely resistant to environmental and metabolic degradation [1]. This high persistence is a defining characteristic that makes PFAS management particularly challenging.<h3>Documented Health Effects</h3>Current scientific research has linked PFAS exposure to numerous adverse health outcomes:<ul><li>Reproductive effects including decreased fertility and increased high blood pressure in pregnant women [8]</li><li>Developmental effects in children such as low birth weight, accelerated puberty, and behavioral changes [8]</li><li>Reduced immune system function, including decreased vaccine response</li><li>Interference with natural hormones and endocrine disruption</li><li>Increased cholesterol levels and obesity risk</li><li>Increased risk of several cancers, including prostate, kidney, testicular, oral cavity/pharynx, brain, and endocrine cancers [3]</li></ul>A 2023 study linked PFAS-contaminated water with up to a 33% increase in cancer incidence in affected areas [3]. The study compared regions with elevated PFAS levels to cancer data from the National Cancer Institute, finding higher incidences of various cancers after controlling for factors like smoking and obesity.<h3>Environmental Persistence and Contamination</h3>The extreme persistence of PFAS represents a fundamental concern for environmental management. PFAS are considered the most environmentally persistent substances among organic chemicals [7]. This persistence means that even if all PFAS uses were immediately phased out, existing contamination would continue to affect ecosystems and water supplies for generations.A 2023 study at a military fire training site estimated that PFAS contamination will persist for centuries without remediation [7]. The research found that terminal PFAS still exceed regulatory limits by 2000-fold decades after aqueous film-forming foam (AFFF) use ceased, with precursors accounting for around half of the extractable organofluorine across years.<h3>Current Detection Methods</h3><h4>EPA Standardized Methods</h4>The Environmental Protection Agency (EPA) has developed several standardized methods for PFAS detection, each with specific applications and capabilities:<h5>EPA Method 533</h5><a target="_blank" rel="noopener noreferrer" href="https://blog.organomation.com/blog/epa-533-drying-down-pfas-samples-after-spe">EPA Method 533</a> focuses on "short chain" PFAS with carbon chain lengths of C4 to C12. Released in December 2019, this method complements Method 537.1 and includes several key features:<ul><li>Uses isotope dilution quantification approach with extracted internal standards, which reduces overall analytical uncertainty</li><li>Employs weak anion exchange solid phase extraction cartridges as opposed to polystyrene divinylbenzene used in 537.1</li><li>Can analyze 25 PFAS compounds, including additional short-chain PFAS that were not apart of Method 537.1</li><li>Allows for longer holding times: 28 days to extraction and 28 days to analyze (compared to 14 days to extraction in Method 537.1)</li><li>Uses ammonium acetate as a preservative (versus Trisma in Method 537.1) [1]</li></ul><h5>EPA Method 537/537.1</h5><a target="_blank" rel="noopener noreferrer" href="https://blog.organomation.com/blog/sample-concentration-epa-method-537-pfas-determination">EPA Method 537 </a>was first published in 2009 for the determination of 14 PFAS in drinking water [6]. It was later updated to Method 537.1 in 2018 (with editorial updates in 2020) to expand its capabilities:<ul><li>Uses<a target="_blank" rel="noopener noreferrer" href="https://www.organomation.com/what-is-solid-phase-extraction-spe"> solid phase extraction (SPE) </a>and<a target="_blank" rel="noopener noreferrer" href="https://www.organomation.com/preparing-samples-for-lc-ms/ms-analysis"> liquid chromatography/tandem mass spectrometry (LC-MS/MS)</a></li><li>Method 537.1 expanded detection to 18 PFAS compounds, including HFPO-DA (one component of GenX technology)</li><li>Utilizes styrene-divinylbenzene (SDVB) media for extraction</li><li>Requires samples to be extracted within 14 days and analyzed within 28 days</li><li>Methanol is used to elute the extracts. This should then be reconstituted with a 96:4 methanol:water mixture [1]</li></ul>Together, Methods 533 and 537.1 can detect a total of 29 unique PFAS compounds in drinking water and are approved for monitoring under the fifth Unregulated Contaminant Monitoring Rule (UCMR 5) and the PFAS National Primary Drinking Water Regulation [1] [3].<h5>EPA Method 1633</h5><a target="_blank" rel="noopener noreferrer" href="https://blog.organomation.com/blog/preparing-diverse-sample-matrices-for-epa-method-1633">EPA Method 1633</a>, released in 2024, represents a significant advancement in PFAS analysis:<ul><li>Developed for the analysis of 40 PFAS compounds in various matrices, including surface water, groundwater, wastewater, soil, biosolids, sediment, landfill leachate, and fish tissue</li><li>Expands beyond the drinking water focus of Methods 533 and 537.1</li><li>Provides a standardized approach that may replace modified drinking water methods (i.e., modified EPA 537) that were previously used for non-drinking water matrices [1]</li></ul><h4>Conventional Analytical Techniques</h4>The gold standard for PFAS analysis involves chromatographic techniques coupled with mass spectrometry:<ul><li>Liquid Chromatography-Tandem Mass Spectrometry (LC-MS/MS) is the most widely used method for PFAS analysis, offering high sensitivity and specificity [1]</li><li>High-Resolution Mass Spectrometry (HRMS) allows for rapid detection and identification of PFAS species at very low concentrations [5]</li></ul>These techniques can detect PFAS at parts per trillion (ppt) levels, which is essential given the low concentrations at which PFAS can cause health effects [1]. However, these methods require sophisticated equipment, specialized training, and significant financial resources, making them inaccessible in many regions, particularly in developing countries.<h4>Emerging Detection Technologies</h4>Several innovative approaches are being developed to address the limitations of conventional methods:<ul><li>Electrochemical biosensors using modified electrodes have shown promise for selective PFAS detection with low detection limits [2]</li><li>Surface-Enhanced Raman Spectroscopy (SERS) uses metallic nanoparticles and can be made into a portable method for on-site testing [1]</li><li>Molecular imprinted polymers (MIPs) offer thermal and physical stability, reusability, and low-cost synthesis for PFAS detection [6]</li></ul>These emerging technologies aim to provide more accessible, field-deployable, and cost-effective alternatives to traditional laboratory-based methods.<h3>Challenges in PFAS Detection</h3><h4>Analytical Challenges</h4>Detecting PFAS presents several technical challenges:<ul><li>The ubiquity of PFAS in laboratory equipment and accessories can lead to background contamination when measuring at parts-per-trillion levels [1]</li><li>Many components in liquid chromatographs, mass spectrometers, and solid-phase extraction systems contain materials that can leach PFAS compounds [9]</li><li>The vast number of PFAS (thousands of compounds) makes comprehensive detection difficult, as analytical standards are only available for a small subset [1]</li><li>Complex matrices like food and environmental samples require sophisticated sample preparation techniques</li></ul><h4>Global Disparities in Detection Capabilities</h4>Access to PFAS detection technology varies significantly worldwide:<ul><li>Many developing regions, particularly in Africa, lack adequately equipped laboratories with the necessary instrumentation to detect and measure PFAS</li><li>There is often a scarcity of qualified professionals with experience in PFAS analysis in these regions</li><li>The high cost of acquiring and maintaining sophisticated analytical instruments presents a substantial obstacle to conducting extensive PFAS investigations in resource-limited settings [1]</li><li>Competing priorities such as infectious diseases, poverty, and food security often divert attention and resources from environmental pollutants like PFAS</li></ul><h4>Regulatory Landscape and Compliance</h4>The regulatory framework for PFAS is evolving rapidly worldwide:<ul><li>The EPA finalized Section 8(a)(7) of the Toxic Substances Control Act in September 2024, requiring manufacturers and importers to report on their use of PFAS since 2011 [10]</li><li>Electronic reporting for PFAS will open on July 11, 2025, with final reporting deadlines in 2026</li><li>Companies must report detailed information including chemical identity, production volumes, industrial and consumer products, worker exposure, and disposal methods [10]</li></ul>These regulations are driving demand for more effective and accessible PFAS detection methods to ensure compliance and protect public health.<h3>Future Directions in PFAS Detection</h3><h4>Technological Advancements</h4>The future of PFAS detection lies in developing more accessible, sensitive, and comprehensive methods:<ul><li>Non-targeted screening methods that can identify unknown PFAS compounds without requiring analytical standards for each specific compound</li><li>Total fluorine analysis techniques like Adsorbable Organic Fluorine and Total Oxidizable Precursor Assay that can quantify the presence of fluorine atoms within a sample [1]</li><li>Portable sensors and field-deployable technologies that enable on-site monitoring and rapid response to contamination events</li><li>AI-driven solutions that can improve data analysis and interpretation for complex PFAS mixtures</li></ul><h4>Collaborative Approaches</h4>Addressing the global challenge of PFAS detection requires coordinated efforts:<ul><li>International partnerships between researchers in developed and developing regions to enhance expertise and capacity building</li><li>Standardization of analytical methods to ensure consistency and comparability of results across different laboratories and regions</li><li>Open data sharing and collaboration across countries to leverage collective knowledge and resources</li><li>Integration of PFAS monitoring into broader environmental and public health surveillance systems</li></ul><h3>Conclusion</h3>The detection of PFAS is not merely a technical challenge but a critical public health and environmental imperative [1]. As these "forever chemicals" continue to persist in our environment, developing effective, accessible, and comprehensive detection methods becomes increasingly important. By advancing detection technologies, strengthening regulatory frameworks, and fostering global collaboration, we can better understand, monitor, and ultimately mitigate the impacts of PFAS contamination.The EPA's standardized methods (533, 537.1, and 1633) provide crucial tools for monitoring PFAS in various environmental matrices, but continued innovation is needed to address the full spectrum of PFAS compounds and to make detection more accessible globally [1] [6]. The path forward requires sustained investment in research and development, capacity building in resource-limited settings, and a commitment to environmental justice that ensures all communities have access to the tools and information needed to protect themselves from PFAS exposure. Only through such comprehensive approaches can we hope to address the complex challenges posed by these persistent pollutants.Be sure to check out our other installments of our&nbsp;<a target="_blank" rel="noopener noreferrer" href="https://blog.organomation.com/blog/introducing-our-environmental-contaminants-series-making-sense-of-the-alphabet-soup">Environmental Contaminant Series</a>&nbsp;covering&nbsp;<a target="_blank" rel="noopener noreferrer" href="https://blog.organomation.com/blog/the-importance-of-detecting-persistent-organic-pollutants-pops">Persistent Organic Pollutants (POPs)</a>,&nbsp;<a target="_blank" rel="noopener noreferrer" href="https://blog.organomation.com/blog/the-importance-of-detecting-polycyclic-aromatic-hydrocarbons-pahs">Polycyclic Aromatic Hydrocarbons (PAHs)</a>,&nbsp;<a target="_blank" rel="noopener noreferrer" href="https://blog.organomation.com/blog/the-importance-of-detecting-semi-volatile-organic-compounds-svocs">Semi-Volatile Organic Compounds (SVOCs)</a>, and <a target="_blank" rel="noopener noreferrer" href="https://blog.organomation.com/blog/the-importance-of-detecting-polychlorinated-biphenyls-pcbs">Polychlorinated Biphenyls (PCBs)</a>.

The Importance of Detecting Per- and Polyfluoroalkyl Substances (PFAS)

Our Library never stops expanding. What are the most recent contributions to LabRulezICPMS Library in the week of 31st August 2026? Check out new documents from the field of spectroscopy/spectrometry and related techniques!<blockquote>👉 <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library">SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT SPECTROSCOPY/SPECTROMETRY RELATED TECHNIQUES</a></blockquote><blockquote>👉 Need info about different analytical techniques? Peek into <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library">LabRulezLCMS</a> or <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library">LabRulezGCMS</a> libraries.</blockquote>This week we bring you brochures by Agilent Technologies and Waters Corporation and application notes by Shimadzu and Thermo Fisher Scientific!<h3>1. Agilent Technologies: Agilent OpenLab ICP-MS Software</h3>Simplify every step of ICP-MS analysisFor Agilent <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/icpms/library?mainauthorItems=10&amp;search=7800">7800</a>, <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/icpms/library?mainauthorItems=10&amp;search=7850">7850</a>, and <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/icpms/library?mainauthorItems=10&amp;search=7900">7900</a> ICP-MS systems, and Agilent <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/icpms/library?mainauthorItems=10&amp;search=8900">8900</a> and <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/icpms/library?mainauthorItems=10&amp;search=9500">9500 ICP-QQQ</a> systems.<ul><li>Brochure</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/pdf/br_openlab_icp_ms_software_5994_9288en_agilent_05f01dcdef.pdf">Full PDF for download</a>&nbsp;</li></ul>The brochure introduces <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/icpms/library?mainauthorItems=10&amp;search=OpenLab+ICP-MS+Software">Agilent OpenLab ICP-MS Software</a>, designed to simplify routine operation and data handling for Agilent 7800, 7850, and 7900 ICP-MS systems and the 8900 and 9500 ICP-QQQ systems. The software supports the complete analytical workflow—from checking instrument readiness and creating batches to acquisition, data review, reporting, and compliance. A central dashboard provides an overview of system status, maintenance requirements, instrument health, and utilization, while Smart EMF and post-run performance checks help users identify when maintenance may be required. Guided Diagnostics, Meter Monitor, and time-stamped system records also support troubleshooting by tracking parameters such as vacuum levels, gas flows, and temperatures.Method and batch setup are designed to reduce manual configuration. Batches can be created from preset methods, templates, existing batches, Method Wizard, or Method Advisor, and legacy Agilent ICP-MS MassHunter batches can be opened directly in OpenLab ICP-MS. For the 9500 ICP-QQQ, Method Advisor provides an element-focused approach in which users select target elements and calibration information while the software applies recommended acquisition masses and cell-gas conditions. Preset methods are available for applications including EPA 200.8/EPA 6020, USP &lt;232&gt;, ICH Q3D, and Chinese Pharmacopoeia requirements, while an IntelliQuant Screening preset supports semiquantitative screening of unknown samples. Routine instrument tasks can also be automated through autotuning, startup checks, batch queues, end-of-run verification, rinse functions, and automatic shutdown.For data evaluation, OpenLab ICP-MS provides a real-time workspace where users can review analyte concentrations, internal-standard recoveries, stability plots, spectra or chromatograms, calibration information, QC charts, and IntelliQuant results in a single view. IntelliQuant acquires a complete mass spectrum and displays semiquantitative elemental concentrations using a color-coded periodic table, while IntelliQuant Star Rating assigns a zero-to-five-star data-quality score based on factors such as potential interferences, calibration quality, background, detection limits, and precision. Reporting options include whole-batch reports, elemental impurity reports for USP &lt;232&gt;/&lt;233&gt; and ICH Q3D, customizable reports, structured CSV export, and direct data transfer to LIMS.The software can be expanded for specialized applications, including LC-ICP-MS and GC-ICP-MS, advanced QC workflows, single-particle ICP-MS and FFF-ICP-MS, ADS 2 automation, semiconductor analysis, and peripheral-device control. Supported analytical approaches include external calibration, standard additions, semiquantitative calibration, isotope ratios, and isotope dilution. For regulated laboratories, OpenLab ICP-MS can be combined with scalable OpenLab compliance solutions providing electronic signatures, user access control, configurable roles, system activity logs, and audit trails, supporting workflows subject to 21 CFR Part 11, EU Annex 11, and equivalent regulations. Overall, the platform is positioned as a unified environment for routine and advanced ICP-MS workflows, combining instrument control, method setup, diagnostics, data-quality assessment, reporting, and compliance support.<h3>2. Shimadzu: Identification of Virgin PET and Recycled PET by X-ray Fluorescence Spectrometry</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/pdf/an_01_01204_en_f3f20ff020.pdf">Full PDF for download</a></li></ul><h5>User benefits</h5><ul><li>EDX enables the identification of recycled PET.&nbsp;</li><li>Measurements are quick and simple, require no cumbersome pretreatment, and can be automated using a multi-sample turret.&nbsp;</li><li>The instrument offers excellent cost-performance and supports the detection of a wide range of elements.</li></ul>Establishing a sustainable circular economy is a major societal challenge, and recycling plastic materials such as PET (polyethylene terephthalate) plays a particularly important role in reducing environmental impact. Large numbers of PET bottles and molded products are used every day in the food and beverage sectors. To recycle these materials safely and reliably, technologies are required that can accurately identify their origin. In practice, however, appearance and conventional physical properties alone are insufficient to distinguish virgin material from recycled material, creating a need for a more reliable identification method.&nbsp;For rapid identification in industrial settings, a method requiring little or no pretreatment is highly desirable. In some cases, nondestructive analysis is also needed to enable subsequent application of other analytical techniques. This article presents a practical approach in which metal catalysts present in PET are detected by EDX (Energy-Dispersive X-ray Spectroscopy) and used to distinguish material-recycled PET from virgin PET.<h4>Principle and Overview&nbsp;</h4>Metal catalysts such as antimony (Sb) and germanium (Ge) are used in the synthesis of PET resin. These catalyst metals have been reported to be useful indicators of material origin. 1),2) For example, Sb and Ge are frequently detected together in material-recycled PET, whereas only one catalyst metal is detected in chemically recycled PET and virgin PET. This likely reflects the fact that material-recycled PET is derived from a mixture of feedstocks using different catalysts.&nbsp;ICP-AES (ICP optical emission spectrometry) and ICP-MS (ICP mass spectrometry), which are commonly applied to catalyst metal analysis, provide high sensitivity and accuracy. However, they require pretreatment to convert the sample into a solution, thereby lengthening the analytical workflow. By contrast, EDX can measure solid samples directly, making it well-suited to applications requiring rapid results, such as incoming material inspection and in-line analysis in molding plants. Because EDX is non-destructive, it is also suitable for multimodal analytical workflows.&nbsp;On the other hand, some commercially available handheld EDX instruments do not support elements such as Sb and Ge. At the same time, higher-end systems may not offer the specifications or price range needed for industrial deployment. The <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/icpms/library?mainauthorItems=1&amp;search=EDX-7200">EDX-7200</a> supports a broad range of elements with excellent cost performance. This article describes the analysis of Sb and Ge in PET using this instrument.<h4>Conclusion&nbsp;</h4>EDX enables rapid and straightforward elemental analysis without cumbersome sample pretreatment. Previous studies have shown that the presence of Sb and Ge can be used to identify recycled PET. Building on this concept, this article presents a practical analytical approach based on EDX. Using the EDX-7200, which combines broad elemental coverage with excellent cost performance, the proposed method provides a practical tool for rapid on-site identification, quality control, and traceability management. When combined with physical property data and other information, this approach is expected to contribute to the safety assessment and quality assurance of recycled materials, thereby supporting a more advanced circular economy.<h3>3. Thermo Fisher Scientific: Optimizing lithium-ion battery recycling operations using handheld XRF analysis</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/pdf/lithium_ion_battery_recycling_handheld_xrf_analysis_an1120_en_4c00477b78.pdf">Full PDF for download</a></li></ul>The shift to a low-carbon economy and the adoption of electric vehicles will drive an exponential increase in the demand for lithium-ion batteries. As a corollary to this, the International Energy Agency expects the demand for some key commodities to increase significantly over the next two decades: the demand for Copper (Cu) is anticipated to increase by more than 40%; for nickel (Ni) and cobalt (Co), by 60-70% each; and for lithium (Li), by nearly 90%.¹ This will translate into increased mining activities and potentially generate larger amounts of deleterious waste.&nbsp;To reduce the environmental impact and limit reliance on scarce commodities associated with economical and geopolitical implications, several countries have implemented regulations regarding producers’ responsibilities.² These regulations contain both incentives and accountability guidelines for lithium-ion battery and electric vehicles manufacturers. Their goal is to facilitate the emergence of a circular economy in which recycling will increasingly contribute to the supply of the strategic raw materials.&nbsp;Lithium-ion batteries are made of multiple components, the most valuable being the cathode that contains between 40 and 70% ³, ⁴ of the total value of the battery, depending on its exact chemistry. As of 2023, lithium nickel cobalt manganese oxides (NCM) account for 66% of lithium-ion battery cathode active materials for electric vehicles, followed by lithium iron phosphates (LFP) which account for 24%, and lithium nickel cobalt aluminum oxide (NCA) accounts for the remaining 10%.³<h4>Handheld X-ray Fluorescence Analysis&nbsp;</h4>Handheld X-ray fluorescence analysis (HHXRF) is an elemental analysis technique that has proven to be cost-effective in recycling areas such as scrap metal and automotive catalytic converters. HHXRF can measure elements from magnesium (Mg) to uranium (U) in various types of materials such as metals and alloys; non-metallic inorganic materials such as ceramics; or ores or plastics. The <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/products/1993">Thermo Scientific™ Niton™ XL2</a> and <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/products/1992">Thermo Scientific™ Niton™ XL5 Plus Handheld XRF Analyzers </a>deliver accurate elemental analysis in real time, with little or no sample preparation, across multiple steps of the lithium-ion battery recycling workflow. Although handheld XRF does not detect lithium, it can measure most elements from the periodic table including nickel or cobalt which often command much higher value than the lithium in a lithium-ion battery.⁴<h4>Conclusion&nbsp;</h4>There is no ideal process to recycle lithium-ion batteries that simultaneously incorporates low environmental impact, high metal recovery yield, and economic viability. Because of the variety of technologies and materials used, recycling lithium-ion batteries is a complex journey with multiple possible paths. HHXRF helps recyclers by generating lab-quality data in real time, allowing them to optimize their processes and make fast decisions that generate significant benefits:&nbsp;<ul><li>Unwanted materials containing heavy metals such as lead or cadmium can be prevented from entering subsequent steps in the recycling workflow.&nbsp;</li><li>Materials can be accurately sorted and adequate processes for recovery selected depending on the material type (e.g., LFP vs. MCM).&nbsp;</li><li>The economic value of incoming and outgoing material can be more accurately estimated.</li></ul><h3>4. Waters Corporation: Waters Aura Systems</h3><ul><li>Brochure</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/pdf/720009268_7b9ad02cb4.pdf">Full PDF for download</a></li></ul>The presentation introduces the Waters Aura Systems, a family of high-throughput, fluidics-free instruments for the characterization and identification of visible and subvisible particles. All Aura platforms provide particle counting, identification, morphology assessment, and flexible sample volumes ranging from microliters to milliliters. The portfolio includes configurations tailored to different applications: AuraBMI for biologics particle analysis, Aura for particle analysis with identification, <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/products/2437">AuraPTx</a> for protein formulation development, <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/products/2438">AuraGT</a> for gene therapy, <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/products/2439">AuraCL</a> for cell therapy, and <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/products/2190">Aura+</a> as the most comprehensive platform. The systems are designed for automation-ready operation, straightforward method transfer, and continuity from research through QC.A key feature of the Aura platform is the combination of Backgrounded Membrane Imaging (BMI), Fluorescence Membrane Microscopy (FMM), and Side Illumination Membrane Imaging (SIMI). BMI captures particles on a membrane and subtracts the membrane background to improve particle contrast, while FMM uses fluorescent dyes or conjugated antibodies to distinguish specific particle types. This enables differentiation of protein aggregates, cells, viral capsids, degraded excipients, plastics, fibers, and other contaminants that may look similar based on morphology alone. SIMI adds further information for identifying unlabeled inorganic particles such as glass, fibers, and Dynabeads. Together, these techniques provide more specific particle identification than morphology-based classification alone.The systems are particularly suited to biologics, gene therapy, and cell therapy development. For gene therapy, Aura can evaluate AAV stability, distinguish capsid-related particles, and monitor DNA leakage using SYBR Gold fluorescence, with measurements possible from as little as 5 µL of sample. For cell therapy, the system can differentiate single cells, cell aggregates, protein aggregates, and extrinsic particles. The platform also supports flexible sample volumes and 24- or 96-well membrane formats, allowing the same general approach to be used from sample-limited early development through larger-volume and QC workflows. The brochure reports excellent quantitative linearity across serial dilutions and emphasizes the ability to preserve sample for additional orthogonal analyses.From a technical perspective, Aura Systems provide 100% sampling efficiency, a particle detection and quantitation range above 1 µm, and can handle concentrations above 3,000,000 particles/mL for 1.6 µm particles. Brightfield membrane imaging takes approximately one minute per sample, while fluorescence measurements require about 15–30 seconds per sample. The instruments are compatible with robotic automation and offer different fluorescence-channel configurations depending on the selected Aura model. Overall, the platform is positioned as a comprehensive solution for obtaining quantitative particle counts together with information on particle identity and composition across the development and quality-control lifecycle.

News from LabRulezICPMS Library - Week 36, 2026

Article

Application

Scientists

Environment

Water

Interview

The Czech Academy of Sciences (CAS) was established by Act No. 283/1992 Coll. as the Czech successor of the former Czechoslovak Academy of Sciences. It is set up as a complex of 54 public research institutions.

Czech Academy of Sciences

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Organomation, founded in 1959, designs and manufactures high-quality nitrogen evaporators and extraction systems. Known for innovation and durability, their lab instruments are used globally for efficient sample preparation with strong customer support.

Organomation

Organomation RapidVap N2 Nitrogen Evaporator

The RapidVap N₂ nitrogen evaporator enables fast solvent evaporation using a controlled nitrogen stream. It combines dry block heating, vortex motion, and end-point detection for efficient sample concentration.

The RapidVap N₂ Evaporation Systems provide a fast, automated alternative to <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1904">Kuderna-Danish</a> and rotary evaporators, compatible with a wide range of aggressive chemicals. By directing a controlled stream of nitrogen or dry gas onto the sample surface, these systems reduce the partial pressure above the liquid to accelerate evaporation, with optional vortex motion and dry heat for further speed.&nbsp;The main block accommodates eight large samples up to 450 mL each, and an accessory block supports eight 170 mL tubes for solid phase extraction.&nbsp;The unique Cool-Zone block design slows evaporation after the end point, preventing samples from going completely dry and allowing time for solvent exchange or removal. Built-in alarms notify users when the process reaches the timed end point or approaches completion, enabling unattended operation.&nbsp;<ul><li>Dry Block: Dry heating system prevents potential contamination source</li><li>Increased Surface Area: Vortex motion increases surface area for faster evaporation</li><li>PTFE-Coated Chamber: Aluminum with PTFE coating for broad range of chemical compatibility</li><li>End-Point Detection: Signal completion of run allows samples to be left unattended while drying to desired end point</li></ul>In partnership with Labconco.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Organomation_Rapid_Vap_N2_Nitrogen_Evaporator_2_eb75d729d4.jpg" alt="Organomation RapidVap N2 Nitrogen Evaporator " srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Organomation_Rapid_Vap_N2_Nitrogen_Evaporator_2_eb75d729d4.jpg 235w," sizes="100vw" width="1152" height="764"><h3>STANDARD FEATURES</h3><ul><li>Dry block heating system prevents adding potential contamination source</li><li>Vortex action, heat, and vacuum combine to accelerate evaporation</li><li>PTFE-coated chamber for broad range of chemical compatibility</li><li>Microprocessor-controlled vortex motion increases surface area for faster evaporation</li><li>Signal completion of run allows samples to be left unattended while evaporation to desired end point</li><li>Microprocessor-controlled nitrogen blow down manifold to facilitate liquid to gas phase change</li></ul><h3>REQUIREMENTS (not included):</h3><ul><li>Glassware</li><li>Nitrogen source with flow rate of 0.6 CFM/17 LPM minimu</li><li>Gas pressure regulator</li></ul><h3>OPTIONS</h3><ul><li>RS-232 Link for two-way communication (Cat# LC-7910010)</li></ul><h3>SPECIFICATIONS</h3><ul><li>Instrument: RapidVap N2</li><li>Instrument Catalog Number: LC-7910000</li><li>Bath Type: Dry aluminum blocks</li><li>Number of Sample Positions: Up to 8</li><li>Dimensions (w x d x h): 21.7 x 19.0 x 13.5 in</li><li>Weight: Net: 99 lbs. (45 kg)</li><li>Weight: Gross: 107 lbs. (49 kg)</li><li>Sample Layout: Circular</li><li>Lid Material: Glass</li><li>Pressure Regulator: 0–20 psi</li><li>Temperature Range: 0–100 °C</li><li>Warranty: 1 year</li><li>Electrical Requirements: 115V, 60 Hz</li><li>Vortex Motion: Up to 500 RPM</li></ul><h5>Nitrogen Requirements</h5><ul><li>Flow Rate: 0.6 CFM / 17 LPM minimum</li><li>Pressure: 5–10 psi</li></ul><h3>ACCESSORIES</h3><ul><li>PTFE-coated aluminum blocks</li><li>Borosilicate glass tubes</li><li>600 mL tubes with stems</li><li>170 mL tubes with stems</li><li>Flat bottom tubes</li><li>Eight-place stainless steel racks</li><li>Glassware caps</li></ul>

Organomation RapidVap Vertex Dry Evaporator

The RapidVap Vertex dry evaporator accelerates solvent evaporation for up to 50 samples using dry block heating, gentle nitrogen blowdown, and an intuitive touchscreen interface.

The RapidVap Vertex Dry Evaporator accelerates sample evaporation by combining efficient dry heat with gentle nitrogen blowdown, allowing laboratories to process up to 50 samples simultaneously.Its intuitive touchpad interface makes it easy to set and control both temperature and run time, and users can save up to ten custom programs to ensure consistent, repeatable workflows. Because it relies on a dry block heater rather than a traditional water bath, the system requires minimal upkeep—no distilled water, additives, or concerns about waterborne contamination.The RapidVap Vertex is well-suited for a wide range of sample prep needs, including pharmaceutical and drug development, clinical laboratories, environmental analysis, agricultural chemistry, and forensic testing.&nbsp;<ul><li>LCD Display: Touchscreen programming shows parameters for block, sample, and time</li><li>Nitrogen Control: Each switch controls nitrogen flow to each row of five nozzles</li><li>Temperature Sensor: Monitors block or sample temperature</li><li>Dry heat - no water bath: Less maintenance, no rust, no condensation, and no potential source of cross contamination</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Organomation_Rapid_Vap_Vertex_Dry_Evaporator_2_c112725d7a.jpg" alt="Organomation RapidVap Vertex Dry Evaporator" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Organomation_Rapid_Vap_Vertex_Dry_Evaporator_2_c112725d7a.jpg 245w," sizes="100vw" width="1375" height="768">In partnership with Labconco.<h3>STANDARD FEATURES</h3><ul><li>LCD display with touchscreen programming</li><li>Nitrogen control to each row of nozzles</li><li>Pressure regulator for 0 to 45 psi</li><li>Dry heat for less maintenance and no rust compared to water baths</li><li>Microprocessor-controlled heater up to 100 °C</li><li>Temperature sensor monitors block or sample temperature</li><li>Angled samples to increase surface area for faster evaporation</li></ul><h3>REQUIREMENTS (not included)</h3><ul><li>Aluminum block (Specific cat # depends on your tube size)</li><li>Sample tubes</li><li>Nitrogen source with a flow rate of 6.5 CFM/185 LPM minimum</li></ul><h3>SPECIFICATIONS</h3><ul><li>Instrument Catalog Number: LC-7320020</li><li>Bath Type: Dry aluminum blocks</li><li>Number of Sample Positions: Up to 50</li><li>Dimensions (w x d x h): 20.4 x 13.0 x 12.5 in</li><li>Weight: Net: 35 lbs. (16 kg)</li><li>Weight: Gross: 45 lbs. (20 kg)</li><li>Sample Layout: 5 rows of 10 samples</li><li>Lid Material: Glass</li><li>Pressure Regulator: 0–45 psi</li><li>Temperature Range: 30–100 °C</li><li>Warranty: 1 year</li><li>Electrical Requirements: 115V, 60 Hz</li></ul><h5>Nitrogen Requirements</h5><ul><li>Flow Rate: 6.5 CFM / 185 LPM minimum</li><li>Pressure: &lt;50 psi</li></ul><h3>ACCESSORIES</h3><ul><li>Aluminum blocks</li></ul>

Organomation 6 Position N-EVAP Nitrogen Evaporator

Compact nitrogen evaporator for up to 6 samples with precise flow control, heated bath options, and wide sample compatibility.

The Organomation 6 Position N-EVAP is a compact and cost-effective sample concentrator designed for simultaneous evaporation of up to 6 samples. Based on the proven N-EVAP technology developed in the 1970s, it ensures reliable and reproducible solvent evaporation using nitrogen gas within a heated bath.The system supports a wide range of sample sizes – 10–30 mm OD as standard, and up to 30–56 mm OD with an optional holder. The circular rotating design allows easy front access to all samples.<h4>Key Features</h4><ul><li>Evaporation of up to 6 samples simultaneously</li><li>Adjustable nitrogen flow: 0–10 L/min</li><li>Individually adjustable needle valves for precise control</li><li>Circular rotating sample holder for easy access</li><li>Wide sample diameter range: 10–56 mm OD (with optional holder)</li><li>Stainless steel bath construction for durability</li><li>Water or dry bath configurations available</li><li>High temperature limit switch for safety</li><li>Phthalate-free silicone tubing to prevent contamination</li><li>Efficient nitrogen usage with minimal waste</li></ul><h3>Technical Specifications</h3><h4>General</h4><ul><li>Number of positions: 6</li><li>Sample holder layout: Circular</li><li>Gas manifold: Single ring</li><li>Gas flow meter: 0–10 L/min</li><li>Standard sample OD: 10–30 mm</li><li>Optional sample OD: 30–56 mm</li><li>Gas input pressure: 20–30 psig</li><li>With regulator: 30–160 psig</li></ul><h4>Dimensions</h4><ul><li>Water bath: 33 × 28 × 79 cm</li><li>Dry bath: 33 × 28 × 70 cm</li><li>Reduced height: 33 × 28 × 61 cm</li></ul><h4>Needles</h4><ul><li>Length: 4 in (≈10 cm)</li><li>Gauge: 19 ga</li><li>Material: stainless steel + chrome-plated brass hub</li></ul><h4>Heating – Water Bath</h4><ul><li>Temperature range: 30–90 °C</li><li>Power: 550 W</li><li>Controller: mechanical thermostat</li><li>Accuracy: ±2 °C</li></ul><h4>Heating – Dry Bath</h4><ul><li>Temperature range: 40–130 °C</li><li>Power: 500 W</li><li>Medium: aluminum / glass beads</li><li>Accuracy: ±2 °C</li></ul>

Organomation 20 Position Auto N-EVAP Nitrogen Evaporator

The 20 Position Auto N-EVAP enables automated, safe evaporation of up to 20 samples with digital control and pneumatic sample handling.

The Organomation 20 Position Auto N-EVAP is the most advanced nitrogen evaporator developed by Organomation. It combines the classic N-EVAP system with timed automation and optional nitrogen self-generation.The instrument operates in both automatic and manual modes using an integrated pneumatic system. In automatic mode, samples are removed from the heating bath at the end of the cycle, reducing the risk of sample loss or damage.A digital control system provides precise control of gas flow and bath temperature, ensuring safe and reproducible evaporation of up to 20 samples simultaneously.<h4>Key Features</h4><ul><li>Automatic and manual operation modes</li><li>Capacity of up to 20 samples</li><li>Automatic sample removal after cycle completion</li><li>Digital control of temperature and timing</li><li>Nitrogen flow up to 25 L/min</li><li>Built-in pressure reducing regulator</li><li>Dual nitrogen filtration system</li><li>Pneumatic sample lift (gas piston)</li><li>Safety cover and circuit breaker</li><li>Precision needle valve control</li><li>Phthalate-free high-pressure tubing</li><li>Reduced risk of sample loss through automation</li></ul><h4>Available Model</h4><h5>Automatic 20 Position N-EVAP – Water Bath</h5><ul><li>Catalog number: 11220-A</li><li>Bath type: Water</li><li>Number of positions: 20</li><li>Dimensions: 49 × 46 × 92 cm</li><li>Temperature range: 30–100 °C</li><li>Total wattage: 1100 W</li></ul><h5>Standard Features</h5><ul><li>Adjustable flow meter: 0–25 L/min</li><li>Built-in pressure reducing regulator</li><li>Dual nitrogen filters</li><li>Digital temperature controller (LED)</li><li>Electronic timer</li><li>High temperature limit switch</li><li>Safety cover</li><li>Circuit breaker</li><li>High-pressure phthalate-free tubing</li><li>Precision variable valve technology</li><li>Gas piston lift mechanism</li><li>Set of 20 needles (4" × 19 gauge)</li></ul><h4>Options</h4><ul><li>220v wiring harness</li><li>Z-Purge / positive pressure purge case</li><li>Acid resistant coating on instrument and needles</li></ul><h4>Technical Specifications</h4><h4>General</h4><ul><li>Number of positions: 20</li><li>Sample holder layout: Circular</li><li>Gas manifold: Single Ring</li><li>Gas flow rate: 0–25 L/min</li><li>Sample size range: 10–30 mm OD</li><li>Nitrogen input pressure: 30–110 psig</li><li>Acid resistant coating: Optional</li></ul><h4>Needles</h4><ul><li>Size: 102 mm × 19 ga (4")</li><li>Material: stainless steel with plated brass hub</li></ul><h4>Sample Lift Mechanism</h4><ul><li>Type: Gas piston</li><li>Function: automatic lifting/removal of samples</li></ul><h4>Control System</h4><ul><li>Digital temperature control (LED display)</li><li>Electronic timer for gas and heating</li></ul><h4>Heating Specifications</h4><ul><li>Model: 11196</li><li>Medium: Water</li><li>Inside dimensions: 11 × 11 × 5.5 in</li><li>Outside dimensions: 49 × 46 × 18 cm</li><li>Power: 1100 W</li><li>Temperature range: 30–100 °C</li><li>Controller: digital electronic</li><li>Accuracy: ±2 °C</li></ul><h4>Accessories</h4><ul><li>Nitrogen generator (20 L/min)</li><li>Pasteur pipette adapters</li><li>Pressure reducing regulator 0–160 psi</li><li>High temperature silicone fluid</li><li>Various needle sizes and gauges</li></ul><h4>Replacement Parts</h4><ul><li>NA1955 – Nitrogen generator</li><li>NA0603 – Needles 4" × 19 ga</li><li>NA0636 – Pasteur pipette adapter</li></ul>

Organomation 9 Position MULTIVAP Nitrogen Evaporator

The MULTIVAP 9 Position enables rapid evaporation of large-volume samples using a high-temperature dry block and efficient row-based nitrogen control.

The Organomation 9 Position MULTIVAP is a high-temperature dry block nitrogen evaporator designed for large volume sample evaporation.The system features a rectangular 3×3 gas distribution manifold and a dual post lifting assembly, allowing easy adjustment of needles or pipettes. Nitrogen is directed onto the sample surface, enabling rapid solvent evaporation and efficient sample concentration.Each row of three positions can be individually switched on/off, allowing significant nitrogen savings when processing fewer samples.The system operates with a heated aluminum dry block (30–120 °C) or as an ambient (unheated) version.<h4>Key Features</h4><ul><li>Up to 9 samples simultaneously (3×3 layout)</li><li>High-temperature dry block: 30–120 °C</li><li>Ambient (unheated) version available</li><li>Direct nitrogen delivery onto sample surface</li><li>Row-based gas control (3 samples per row)</li><li>Nitrogen flow range: 0–25 L/min</li><li>Built-in pressure regulator</li><li>Digital temperature control and timer</li><li>Dual spring hoist lifting system</li><li>Includes 50 mm OD beakers</li><li>Custom inserts available for different sample sizes</li><li>Compatible with organic solvents</li><li>Optional acid-resistant configuration</li></ul><h4>Available Models</h4><h5>9 Position MULTIVAP – Dry Block</h5><ul><li>Catalog number: 11809</li><li>Heating type: Dry block</li><li>Number of positions: 9</li><li>Dimensions: 41 × 36 × 76 cm</li><li>Temperature range: 30–120 °C</li><li>Power: 900 W</li></ul><h5>9 Position MULTIVAP – No Heating</h5><ul><li>Catalog number: 11809-O</li><li>Heating type: None</li><li>Number of positions: 9</li><li>Dimensions: 33 × 38 × 66 cm</li><li>Temperature: Ambient</li></ul><h4>Standard Features</h4><ul><li>Adjustable flow meter: 0–25 L/min</li><li>Gas distribution manifold (3×3)</li><li>Nitrogen filter</li><li>Built-in pressure reducing regulator</li><li>Electronic timer</li><li>Digital temperature controller (LED)</li><li>Safety control cover plate</li><li>High temperature limit switch</li><li>Dual band hoist spring assembly</li><li>9 beakers (50 mm OD included)</li></ul><h4>Options</h4><ul><li>220v wiring harness</li><li>Z-Purge / positive pressure purge case</li><li>Acid resistant coating</li><li>Pasteur pipette adapters instead of needles</li><li>Manifold and stand only (no heating platform)</li></ul><h3>Technical Specifications</h3><h4>General</h4><ul><li>Number of positions: 9</li><li>Layout: Rectangular (3×3)</li><li>Spacing: 5.87 cm</li><li>Standard vessels: 50 mm OD beakers</li><li>Optional tube range: 16–40 mm OD</li><li>Gas flow: 0–25 L/min</li><li>Flow control: per row (3 samples)</li><li>Gas input pressure: 30–110 psig</li><li>Acid resistant coating: Optional</li></ul><h4>Needles</h4><ul><li>Size: 102 mm × 16 ga</li><li>Material: stainless steel</li><li>Needle guide: optional for tubes</li></ul><h4>Lift Mechanism</h4><ul><li>Type: Dual pulley &amp; band springs</li><li>Function: adjustable needle height</li></ul><h4>Heating Specifications</h4><ul><li>Model: 9156</li><li>Type: Aluminum dry block</li><li>Dimensions: 41 × 36 × 15 cm</li><li>Power: 900 W</li><li>Temperature range: 30–120 °C</li><li>Controller: digital electronic (LED)</li><li>Accuracy: ±2 °C</li></ul><h4>Accessories</h4><ul><li>Nitrogen generator</li><li>Custom inserts&nbsp;</li><li>Pasteur pipette adapters</li><li>Luer plugs</li><li>Various needle sizes and gauges</li></ul>

Organomation 30 Position MULTIVAP Nitrogen Evaporator

The MULTIVAP 30 Position enables high-throughput evaporation of up to 30 samples with a heated dry block, efficient gas control, and custom inserts.

The Organomation 30 Position MULTIVAP is a high-capacity dry block nitrogen evaporator designed for parallel evaporation of up to 30 samples.The system features a rectangular 5×6 gas distribution manifold and a dual post lifting assembly. Nitrogen is directed onto the sample surface, enabling rapid solvent evaporation and efficient concentration.Each row of 5 samples can be independently switched on/off, allowing significant nitrogen savings when processing fewer samples.The system operates with a heated aluminum dry block (30–120 °C) or as an ambient (unheated) version. Custom-made inserts and blocks ensure optimal heat transfer for specific sample sizes.<h4>Key Features</h4><ul><li>Up to 30 samples simultaneously (5×6 layout)</li><li>High-temperature dry block: 30–120 °C</li><li>Ambient (no heating) version available</li><li>Direct nitrogen blowdown onto sample surface</li><li>Row-based gas control (5 samples per row)</li><li>Nitrogen flow: 0–25 L/min</li><li>Built-in pressure regulator</li><li>Digital temperature control and timer</li><li>Dual spring hoist system</li><li>Custom inserts for optimized heat transfer</li><li>Compatible with organic solvents</li><li>Optional acid-resistant version</li></ul><h4>Available Models</h4><h5>30 Position MULTIVAP – Dry Block</h5><ul><li>Catalog number: 11830</li><li>Heating type: Dry block</li><li>Number of positions: 30</li><li>Dimensions: 41 × 36 × 76 cm</li><li>Temperature range: 30–120 °C</li><li>Power: 900 W</li></ul><h5>30 Position MULTIVAP – No Heating</h5><ul><li>Catalog number: 11830-O</li><li>Heating type: None</li><li>Number of positions: 30</li><li>Dimensions: 33 × 38 × 66 cm</li><li>Temperature: Ambient</li></ul><h4>Standard Features</h4><ul><li>Adjustable flow meter: 0–25 L/min</li><li>Gas distribution manifold (5×6)</li><li>Nitrogen filter</li><li>Built-in pressure reducing regulator</li><li>Digital temperature controller (LED)</li><li>Electronic timer</li><li>Safety control cover plate</li><li>High temperature limit switch</li><li>Dual band hoist spring assembly</li></ul><h4>Options</h4><ul><li>220v wiring harness</li><li>Z-Purge / positive pressure purge case</li><li>Acid resistant coating</li><li>Pasteur pipette adapters instead of needles</li><li>Manifold and stand only (no heating platform)</li></ul><h3>Technical Specifications</h3><h4>General</h4><ul><li>Number of positions: 30</li><li>Layout: Rectangular (5×6)</li><li>Spacing: 3.33 cm</li><li>Sample diameter range: 16–30 mm OD</li><li>Gas flow: 0–25 L/min</li><li>Flow control: per row (5 samples)</li><li>Gas input pressure: 30–110 psig</li><li>Acid resistant coating: Optional</li></ul><h4>Needles</h4><ul><li>Size: 102 mm × 19 ga</li><li>Material: stainless steel</li><li>Needle guide: optional</li></ul><h4>Lift Mechanism</h4><ul><li>Type: Dual pulley &amp; band springs</li><li>Function: adjustable needle height</li></ul><h4>Heating Specifications</h4><ul><li>Model: 9156</li><li>Type: Aluminum dry block</li><li>Dimensions: 41 × 36 × 15 cm</li><li>Power: 900 W</li><li>Temperature range: 30–120 °C</li><li>Controller: digital electronic (LED)</li><li>Accuracy: ±2 °C</li></ul><h4>Accessories</h4><ul><li>Nitrogen generator</li><li>Custom inserts</li><li>Pasteur pipette adapters (not compatible with needle guide)</li><li>Luer plugs</li><li>Various needle sizes and gauges</li></ul>

Organomation ROT-X-TRACT-LC Extraction System

ROT-X-TRACT-LC is a high-throughput liquid-liquid extraction system supporting simultaneous processing of up to eight samples using Corning Accelerated One-Step apparatuses.

The ROT-X-TRACT-LC system is designed to support up to eight (8) Corning Accelerated One-Step extraction apparatuses, providing an efficient solution for high-throughput liquid-liquid extraction workflows. The Corning Accelerated One-Step extractor integrates extraction and concentration into a single continuous process, helping laboratories streamline sample preparation while reducing manual handling steps.To maintain compatibility with standard laboratory fume hoods, the system utilizes a modified Friedrichs condenser with a reduced overall height. Allihn condensers are also available upon customer request.The hydrophobic membrane enables continuous circulation of the organic solvent through the 1 L sample bottle until extraction is complete. By integrating a stopcock assembly and a 3-ball Snyder column, the Corning One-Step extractor is capable of both analyte extraction and final solvent evaporation within the same operating cycle.The system also includes an electronic side control module that allows users to program bath temperatures and timed operating cycles in accordance with specific analytical methodologies.<ul><li>Multiple Simultaneous Extractions: Extract and concentrate up to eight samples at once</li><li>Easy Sample Access: The instrument rotates allowing all samples to be accessed from the front</li><li>Fewer Connections: One water supply line in, one drain line out</li><li>Precise: Digital control option allows for exact temperature regulation</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Organomation_ROT_X_TRACT_LC_Extraction_System_c7cbab77de.jpg" alt="Organomation ROT-X-TRACT-LC Extraction System" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Organomation_ROT_X_TRACT_LC_Extraction_System_c7cbab77de.jpg 156w," sizes="100vw" width="1400" height="1400"><h3>Standard features</h3><ul><li>Stainless steel construction</li><li>Stepped bath rim and cover disk seals steam chamber</li><li>Each condenser water line attached to centrally located water manifold</li><li>Side control box</li><li>Water flow meter</li><li>Laboratory grade materials stand up to organic solvents</li></ul><h3>Glassware features</h3><ul><li>Stop cock to switch to sample concentration after extraction is complete</li><li>1 L sample bottle</li><li>J-shaped Snyder column</li><li>Hydrophobic Corning membranes (sold separately)</li><li>In-line KD flask for optimum heat transfer</li><li>Vacuum insulated concentrator tube</li></ul><h3>Options (Add to main Cat# when purchasing)</h3><ul><li>All associated glassware</li><li>Positive pressure type Z purged bath (Option Code -Z), Cat# 13318-Z</li><li>240V wiring and plug (Option Code -2), Cat# 13318-2</li></ul><h3>Specifications</h3><ul><li>Instrument Catalog Number: 11318</li><li>Instrument Name: Corning Accelerate One-Step Extractor</li><li>Max No. of Samples: 8</li><li>Bench Space: 24 x 19 x 42 in</li><li>w x d x h: 61 x 48 x 107 cm</li><li>Attached Control Box for Power &amp; Timer: Standard</li><li>Glassware 1000ml: GS3380</li><li>Extractor Type &amp; Size: Corning One-Step 1000 ml</li><li>Solvent Flask Type &amp; Size: In-Line KD 100 ml</li><li>Concentrator Tube: Insulated Tip</li><li>Type &amp; Size: 10 ml 19/22</li><li>Snyder Column Type: J Tube</li><li>Condenser Type: Cold Finger 45/50</li><li>Solvent Collection Flood Extractor: Standard</li><li>Hydrophobic Membrane: Standard</li><li>Water Bath Catalog Number: B3101</li><li>Bath Model Number: 16169</li><li>Bath Inside Dimensions: 16.0 x 8.5 in</li><li>Diameter x Depth: 40.6 x 21.6 cm</li><li>Bath Outside Dimensions: 24 x 19 x 10 in</li><li>w x d x h: 61 x 48 x 25 cm</li><li>Water Flow Meter: 0-3.0 lpm</li><li>Heaters Total Watts: 1600 w</li><li>Bath Temperature Range: 30 - 100 C</li><li>Bath Temperature Accuracy: +/- 2 C</li></ul><h3>Accessories</h3><ul><li>P1332: O-rings for S-EVAP/RXT water manifold</li><li>GA3446C-20: Membranes Corning for Accelerated One-Step extractor, pkg of 20</li><li>All associated glassware</li><li>Bath cover disks &nbsp;</li></ul>

Organomation Teflon-Free N-EVAPs for PFAS Research

Teflon-Free N-EVAP is a nitrogen concentrator for PFAS sample preparation and concentration without the risk of PTFE contamination. It offers individual nitrogen flow control and supports up to 24 samples simultaneously.

Teflon-Free N-EVAP nitrogen evaporators are specifically designed for PFAS sample preparation and concentration workflows in analytical and environmental laboratories. Built entirely without PTFE or other fluoropolymers, these systems help minimize the risk of contamination during nitrogen blowdown evaporation while enabling simultaneous processing of multiple samples.Referenced in EPA PFAS methods 533, 537.1, and 1633, the Teflon-Free N-EVAP models are widely used in environmental and research laboratories requiring reliable PFAS sample preparation. The systems support both 15 mL and 50 mL centrifuge tubes and feature individual needle valves for each sample position, allowing independent nitrogen flow control and flexible processing of samples with different evaporation endpoints.Designed for laboratories requiring both contamination control and workflow flexibility, the Teflon-Free N-EVAP provides an efficient solution for PFAS research and analytical applications.<ul><li>Small Footprint: N-EVAP Models 111 and 112 require about one square foot of bench space</li><li>Flexible: An adjustable sample holder design fits a wide variety of sample tubes and vials at once</li><li>Teflon-Free Guarantee: Made with 100% PTFE-free materials to avoid contamination of PFAS samples</li><li>Individualized Control: Optimize evaporation of diverse samples with individual gas flow control at each vial</li></ul><h3>Standard features</h3><ul><li>Nitrogen filter</li><li>Adjustable flow meter</li><li>Phthalate free silicon tubing eliminates contamination concerns</li><li>High temperature limit switch for safety</li><li>Dual band spring hoist assembly</li><li>Precision needle valve tube assembly</li><li>Needles, 4-inch x 19 gauge with chrome plated brass hub and stainless-steel shaft</li></ul><h3>Options (Add to main Cat# when purchasing)</h3><ul><li>220v wiring harness (Option Code# -2)<ul><li>12 position model: Cat# 11155-NT-2</li><li>24 position model: Cat# 11250-NT-2</li></ul></li><li>Reduced height (Option Code# -S)<ul><li>12 position model: Cat# 11155-NT-S</li><li>24 position model: Cat# 11250-NT-S</li></ul></li></ul><h3>Specifications</h3><ul><li>Bath Type: Water</li><li>Instrumental Catalog Number:&nbsp;<ul><li>Teflon-Free 12p N-EVAP: 11155-NT</li><li>Teflon-Free 24p N-EVAP: 11250-NT</li></ul></li><li>Number of Sample Positions:&nbsp;<ul><li>Teflon-Free 12p N-EVAP: 12</li><li>Teflon-Free 24p N-EVAP: 24</li></ul></li><li>Standard Dimensions (w x d x h):<ul><li>Teflon-Free 12p N-EVAP: 13 x 11 x 31 in / 33 x 28 x 79 cm</li><li>Teflon-Free 24p N-EVAP: 16 x 15 x 33 in / 41 x 38 x 61 cm</li></ul></li><li>Reduced Height Dimensions (w x d x h):<ul><li>Teflon-Free 12p N-EVAP: 13 x 11 x 24 in / 33 x 28 x 61 cm</li><li>Teflon-Free 24p N-EVAP: 16 x 15 x 24 in / 41 x 38 x 61 cm</li></ul></li><li>Sample Holder Layout: Circular</li><li>Gas Manifold Layout: Single Ring</li><li>Test Tube Range (Standard): 10-30 mm OD</li><li>Test Tube Range (Optional):&nbsp;<ul><li>Teflon-Free 12p N-EVAP: 5-16 mm OD</li><li>Teflon-Free 24p N-EVAP: 30-70 mm OD</li></ul></li><li>Gas Flow Meter:&nbsp;<ul><li>Teflon-Free 12p N-EVAP: 0-10 L/min</li><li>Teflon-Free 24p N-EVAP: 0-20 L/min</li></ul></li><li>Stainless Steel Needles (Length x Gauge):&nbsp;<ul><li>Teflon-Free 12p N-EVAP: 4.0 in x 19 ga&nbsp;</li><li>Teflon-Free 24p N-EVAP: 102 mm x 19 ga</li></ul></li><li>Sample Tray Lift Mechanism: Dual Band Spring Hoist Assembly</li><li>Standard Gas Input Range: 20-30 psig</li><li>Gas Input Range w/Optional Pressure Reducing Regulator: 30-160 psig</li></ul><h5>Heating Device Specs</h5><ul><li>Model Number:<ul><li>Teflon-Free 12p N-EVAP: 5585</li><li>Teflon-Free 24p N-EVAP: 9125</li></ul></li><li>Heating Medium: Water</li><li>Inside Dimensions (Diameter x Depth):<ul><li>Teflon-Free 12p N-EVAP: 8.5 x 4.5 in / 21.6 x 11.4 cm</li><li>Teflon-Free 24p N-EVAP: 12.0 x 4.5 in / 30.5 x 11.4 cm</li></ul></li><li>Outside Dimensions (w x d x h):<ul><li>Teflon-Free 12p N-EVAP: 13 x 11 x 7 in / 33 x 28 x 18 cm</li><li>Teflon-Free 24p N-EVAP: 16 x 15 x 7 in / 41 x 38 x 18 cm</li></ul></li><li>Total Wattage:&nbsp;<ul><li>Teflon-Free 12p N-EVAP: 550 W</li><li>Teflon-Free 24p N-EVAP: 900 W</li></ul></li><li>Bath Temperature Range: 30-90 °C</li><li>Temperature Controller Type: Mechanical Thermostat</li><li>Controller Accuracy: +/- 2 °C</li></ul><h3>Accessories</h3><ul><li>Small vessel sample holder for 12 position N-EVAP model only, for vial outside diameters of 5-16 mm (cat# NA1132)</li><li>Large vessel sample holder for 24 position N-EVAP model only, for vial outside diameters of 30-56 mm (cat# NA1113)</li><li>Teflon-free nitrogen generator (cat# NA1955-NT)</li><li>Pasteur pipette adapters (cat# NA0636)</li><li>Teflon-free pressure reducing regulator 0-160 psi (cat# NA0630-NT)</li><li>Various needle sizes and gauges</li></ul><h3>Replacement parts</h3><ul><li>P0627: Valve Tube Assembly – Post 1997</li><li>P0607: Luer &amp; washer for N-EVAP valve tube</li><li>P0634: Tube Fitting nylon 3 part for N-EVAP valve tube</li></ul>

Organomation Teflon-Free MULTIVAPs for PFAS Testing

The Teflon-Free MULTIVAP is a high-capacity evaporator for PFAS workflows, offering up to 100 sample positions, a heated water bath, and PTFE-free construction.

Teflon-free MULTIVAP nitrogen evaporators are designed for high-throughput PFAS sample preparation and concentration. Constructed entirely without PTFE or other fluoropolymers, they help minimize the risk of contamination during evaporation while enabling simultaneous processing of large sample batches.Available in 64- and 100-position configurations, these systems are suitable for laboratories using EPA Methods 533, 537.1, and 1633. A gas distribution manifold provides uniform nitrogen flow to all samples, while row-specific controls allow unused positions to be switched off to reduce nitrogen consumption.The evaporators feature a heated water bath with a temperature range of 30–100 °C and customized sample racks designed for specific tube dimensions, ensuring efficient and reproducible solvent evaporation.For laboratories requiring maximum throughput and consistent PFAS sample preparation, Teflon-free MULTIVAP evaporators provide a reliable and contamination-conscious solution.<ul><li>Capacity: Evaporate batches of up to 64 or 100 samples, with outside diameters of up to 30 mm</li><li>Precise: Digital controls allow exact temperature regulation</li><li>Teflon-Free Guarantee: Made with PTFE-free materials to avoid contamination of PFAS</li><li>Consistent: Uniform evaporation across all samples with no adjustment needed between runs</li></ul><h4>Standard features</h4><ul><li style="line-height:24px;">Adjustable flow meter</li><li style="line-height:24px;">Dual band hoist spring assembly</li><li style="line-height:24px;">High temperature limit switch for safety</li><li style="line-height:24px;">Safety control cover plate</li><li style="line-height:24px;">Digital temperature controller</li><li style="line-height:24px;">Electronic timer</li><li style="line-height:24px;">Nitrogen filter</li><li style="line-height:24px;">Gas distribution manifold</li><li style="line-height:24px;">Built-in pressure reducing regulator</li><li style="line-height:24px;">Needle guide</li></ul><h4>Options (Add to main Cat# when purchasing)</h4><ul><li>220v wiring harness (Option Code# -2)<ul><li style="vertical-align:baseline;">64 position model: Cat# 11364-NT-2</li><li style="vertical-align:baseline;">100 position model: Cat# 11300-NT-2</li></ul></li></ul><h4>Specifications</h4><ul><li>Bath Type: Water</li><li>Instrumental Catalog Number:<ul><li>Teflon-Free 64p MULTIVAP: 11364-NT</li><li>Teflon-Free 100p MULTIVAP: 11300-NT</li></ul></li><li>Number of Sample Positions:<ul><li>Teflon-Free 64p MULTIVAP: 64</li><li>Teflon-Free 100p MULTIVAP: 100</li></ul></li><li>Standard Dimensions (w x d x h): 19 x 17 x 34 in / 48 x 43 x 86 cm</li><li>Sample Holder Layout: Square</li><li>Gas Manifold Layout:<ul><li>Teflon-Free 64p MULTIVAP: 8 x 8 array</li><li>Teflon-Free 100p MULTIVAP: 10 x 10 array</li></ul></li><li>Center to Center Spacing Between Positions:<ul><li>Teflon-Free 64p MULTIVAP: 1.3125 in / 3.33 cm</li><li>Teflon-Free 100p MULTIVAP: 1.0 in / 2.54 cm</li></ul></li><li>Test Tube Diameter:<ul><li>Teflon-Free 64p MULTIVAP: 11–30 mm OD</li><li>Teflon-Free 100p MULTIVAP: 11–22 mm OD</li></ul></li><li>Gas Flow Control On/Off Valve:<ul><li>Teflon-Free 64p MULTIVAP: Every row of 8</li><li>Teflon-Free 100p MULTIVAP: Every row of 10</li></ul></li><li>Gas Flow Meter Range:<ul><li>Teflon-Free 64p MULTIVAP: 0–30 L/min</li><li>Teflon-Free 100p MULTIVAP: 0–50 L/min</li></ul></li><li>Stainless Steel Needles (Length x Gauge): 4.0 in x 19 ga / 102 mm x 19 ga</li><li>Needle Guide: Standard</li><li>Hoist Assembly: Dual Pulley &amp; Band Springs</li><li>Built-in Gas Regulator Input: 30–110 psig</li></ul><h5>Heating Device Specs</h5><ul><li>Model Number: 11196</li><li>Inside Dimensions (Diameter x Depth): 11 x 11 x 5.5 in / 28 x 28 x 14 cm</li><li>Outside Dimensions (w x d x h): 19 x 17 x 7 in / 48 x 43 x 18 cm</li><li>Total Wattage: 1100 W</li><li>Bath Temperature Range:<ul><li>Teflon-Free 64p MULTIVAP: 30–110 °C</li><li>Teflon-Free 100p MULTIVAP: 30–100 °C</li></ul></li><li>Temperature Controller Type: Digital Electronic with LED Display</li><li>Controller Accuracy: +/- 2 °C</li></ul><h4>Accessories</h4><ul><li style="line-height:24px;">Custom sized racks for 64 position model (cat# NA1360)</li><li style="line-height:24px;">Custom sized racks for 100 position model (cat# NA1361)</li><li style="line-height:24px;">Nitrogen generator (cat# NA1935)</li><li style="line-height:24px;">Pasteur pipette adapters (cat# NA0636, cannot be used with needle guide)</li><li style="line-height:24px;">Luer plugs (cat# NA1307)</li><li style="line-height:24px;">Pressure reducing regulator 0-160 psi (cat# NA0630-NT)</li><li style="line-height:24px;">Various needle sizes and gauges</li></ul>

Organomation Dual Microplate Evaporator with Digital Timer

The Dual Microplate Evaporator with Digital Timer enables simultaneous processing of two 96-well plates with precise temperature control, programmable timing, and semi-attended operation.

The Dual Microplate Evaporator with Digital Timer is designed for efficient evaporation of samples in two 96-well microplates simultaneously. Based on the proven MULTIVAP dry block platform, the system combines precise temperature control, an integrated digital timer, and a built-in gas pressure gauge to provide reliable and reproducible evaporation performance.A height-adjustable manifold allows convenient starting and stopping of evaporation for both plates at the same time, while spring-assisted lifting ensures smooth and effortless operation. The programmable timer enables semi-attended operation by automatically stopping heat and gas flow when the preset evaporation time has elapsed.<h3>Specifications</h3><h4>Dual Microplate Evaporator with Digital Timer</h4><ul style="list-style-type:disc;"><li>Instrumental Catalog Number: 11802</li><li>Number of Sample Plates: 2</li><li>Overall Dimension (w × d × h): 16 × 14 × 22 in; 41 × 36 × 56 cm</li><li>Gas Manifold Layout: Dual 8 × 12 array</li><li>Microplate Dimensions (w × d): 3.375 × 5.0 in; 8.5 × 13 cm</li><li>Stainless Steel Needles (Length × Gauge): 2.0 in × 19 ga; 51 mm × 19 ga</li><li>Hoist Assembly: Spring-assisted</li><li>Integrated Control Box with Timer for Nitrogen &amp; Heat: Standard</li><li>Built-in Gas Regulator Input: 50–110 psig</li><li>Acid Resistant Coating (Option Code –RT): Optional</li></ul><h4>Heating Device Specs</h4><ul><li>Bath Model Number: 9156</li><li>Heating Medium: Aluminum dry block</li><li>Outside Dimensions (w × d × h): 16 × 14 × 6.5 in; 41 × 36 × 15 cm</li><li>Total Wattage: 900 W</li><li>Bath Temperature Range: 30–120 °C</li><li>Temperature Controller Type: Digital Electronic with LED Display</li><li>Controller Accuracy: ±2 °C</li></ul>

Products from category Sample preparation automation distributed by Organomation - page 1

Related content

The Importance of Detecting Per- and Polyfluoroalkyl Substances (PFAS)

Interview: What Drew Postdoc Taťána Gazárková to Analytical Chemistry

News from LabRulezICPMS Library - Week 36, 2026