Cancer treatment not only damages tumour cells but also changes them. And some of these changes could be used to target treatment more effectively. Scientists from CEITEC Masaryk University and University Hospital Brno have found that during treatment for chronic lymphocytic leukaemia, a receptor becomes more abundant on the surface of cancer cells, making it possible to target them with an antibody. In laboratory experiments, the researchers therefore combined a commonly used drug with an antibody targeting this receptor. The combination killed leukaemia cells significantly more effectively than the drugs alone. The research is still at the preclinical stage, but points to a possible way towards more effective combination cancer therapies.Chronic lymphocytic leukaemia (CLL) is the most common leukaemia in older adults in the Western world. It affects white blood cells called B lymphocytes, which begin to multiply uncontrollably and accumulate in the blood, bone marrow and lymph nodes. CLL treatment has changed significantly in recent years. Modern targeted drugs can block signals that cancer cells need to survive and multiply.The researchers focused on what happens to leukaemia cells during such treatment. They analysed patient samples collected before and during treatment with BCR inhibitors, drugs commonly used to treat CLL. They studied patients receiving two different targeted BCR inhibitors. Although the two drugs affect cancer cells differently, the cells responded to both with surprisingly similar changes.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/CEITEC_Leukemicke_bunky_reaguji_na_lecbu_tak_ze_ze_sebe_udelaji_terc_2_8b86014944.jpeg" alt="CEITEC/Miroslav Boudný: Leukaemia Cells Respond to Treatment by Turning Themselves into a Target: Preparation of cells for experiments." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_CEITEC_Leukemicke_bunky_reaguji_na_lecbu_tak_ze_ze_sebe_udelaji_terc_2_8b86014944.jpeg 235w," sizes="100vw" width="1600" height="1067">“Cancer cells are not passive. They respond and adapt to treatment. We wanted to know whether, among the changes triggered by treatment, we could find something that could be used against them. That is what led us to the CXCR4 receptor,” explains <a target="_blank" rel="noopener noreferrer" href="https://www.ceitec.eu/veronika-sandova-ph-d/u95494?page=publication">Veronika Šandová</a>, a researcher&nbsp;from Marek Mraz’s laboratory at CEITEC Masaryk University and University Hospital Brno.CXCR4 is a receptor on the cell surface that, among other functions, helps leukaemia cells move to environments that provide favourable conditions for their survival. The researchers found that once treatment begins, CXCR4 levels on the surface of cancer cells increase significantly. The way cancer cells respond to treatment could therefore also become a weakness. Molecules on the cell surface are readily accessible to targeted treatment using specific antibodies.In laboratory experiments, the researchers therefore added ulocuplumab, an antibody that binds to the CXCR4 receptor, to the drugs already being used. The effect was substantial. While around seven out of ten leukaemia cells survived treatment with the drugs alone, only around three to four out of ten survived when the drugs were combined with the antibody. “It is a little like a cancer cell adapting against the first attack and, in doing so, marking itself as a target for a second one. The treatment increases the amount of a particular molecule on its surface, which we can then target,” Veronika Šandová explains.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/CEITEC_Leukemicke_bunky_reaguji_na_lecbu_tak_ze_ze_sebe_udelaji_terc_3_a3d50f3f82.jpeg" alt="CEITEC/Miroslav Boudný: Leukaemia Cells Respond to Treatment by Turning Themselves into a Target: Cooling the cells after the experiment prevents degradation of protein and other molecules." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_CEITEC_Leukemicke_bunky_reaguji_na_lecbu_tak_ze_ze_sebe_udelaji_terc_3_a3d50f3f82.jpeg 235w," sizes="100vw" width="1600" height="1067">The researchers went on to verify the results in a mouse model using leukaemia cells from patients. Here, too, the antibody targeting CXCR4 was highly effective at eliminating the cancer cells.The research is still at the preclinical stage, so this is not a new treatment that can yet be offered to patients. However, it suggests a possible way to identify more effective combinations of cancer drugs. “With cancer, targeting a single mechanism is often not enough because cancer cells can respond to treatment and find other ways to escape and survive. Our results show that we can use these changes to our advantage and target them with additional treatment,” says <a target="_blank" rel="noopener noreferrer" href="https://www.ceitec.eu/prof-marek-mraz-ph-d/u26692">Marek Mráz</a>, head of the research laboratory where the study was conducted.The study therefore offers another perspective on the search for new combinations of cancer treatments: looking not only at whether a drug kills a cancer cell, but also at how it changes the cell – and whether any of these changes could provide a new target for further treatment.The study was conducted in collaboration among scientists from CEITEC Masaryk University, University Hospital Brno, the Faculty of Medicine at Masaryk University, and the Dana-Farber Cancer Institute in Boston.The results were published in the scientific journal <a target="_blank" rel="noopener noreferrer" href="https://onlinelibrary.wiley.com/doi/10.1002/hem3.70481">HemaSphere</a>.<blockquote><h4>The original article</h4><h4><a target="_blank" rel="noopener noreferrer" href="https://onlinelibrary.wiley.com/doi/10.1002/hem3.70481">Gene expression analysis after BTK and PI3Kδ inhibitor treatment in chronic lymphocytic leukemia identifies cell-surface CXCR4 as a synergistic target for combinatorial therapy</a></h4>Gabriela Mladonicka Pavlasova, Veronika Sandova, Laura Ondrisova, Vaclav Seda, Petra Pavelkova, Daniel Filip, Krystof Hlavac, Josef Vecera, Sarka Pospisilova, Anna Panovska, Stacey M. Fernandes, Michael Doubek, Jennifer R. Brown, Marek MrazHemaSphere (2026) 10 (9): e70481<a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1002/hem3.70481">https://doi.org/10.1002/hem3.70481</a><h6>licensed under <a target="_blank" rel="noopener noreferrer" href="https://creativecommons.org/licenses/by/4.0/">CC-BY 4.0</a></h6></blockquote>Marek Mráz’s research group is part of the National Institute for Cancer Research (<a target="_blank" rel="noopener noreferrer" href="https://www.nuvr.cz/en/">NICR</a>).

Leukaemia Cells Respond to Treatment by Turning Themselves into a Target

 Hybrid Metabolomics Explained: Bridging Targeted & Untargeted MS with Bruker's Matthew Lewis

Our Library never stops expanding. What are the most recent contributions to LabRulezICPMS Library in the week of 26th October 2026? Check out new documents from the field of spectroscopy/spectrometry and related techniques!<blockquote>👉 <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library">SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT SPECTROSCOPY/SPECTROMETRY RELATED TECHNIQUES</a></blockquote><blockquote>👉 Need info about different analytical techniques? Peek into <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library">LabRulezLCMS</a> or <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library">LabRulezGCMS</a> libraries.</blockquote><h3>1. Agilent Technologies: Ultratrace Analysis of Surface Impurities in Photovoltaic-Grade Polysilicon by ICP-MS</h3>Quantification of 58 elements per GB/T24582-2023 using an <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/icpms/library?mainauthorItems=10&amp;search=8900">Agilent 8900 ICP-QQQ</a><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/pdf/an_photovoltaic_cells_polysilicon_8900_icp_qqq_5995_0020en_agilent_2125536f4e.pdf">Full PDF for download</a>&nbsp;</li></ul>Green and sustainable energy reduces environmental harm, lowers carbon emissions, and supports long-term ecological balance.1 As energy demand rises and climate impacts intensify, transitioning from fossil fuels to renewable sources, such as solar, wind, hydro, geothermal, and biomass, has become essential for sustainability and energy security.2 Solar energy is widely used through technologies such as photovoltaic (PV) cells, which convert sunlight into electricity, and solar thermal systems, which produce heat. PV cells, which are typically made from crystalline silicon, are key to solar technology. The efficiency, cost, and durability of the cells largely depend on the materials used.3,4&nbsp;PV architectures are fundamentally built upon high-purity silicon ingots— a monocrystalline or polycrystalline mass of semiconductor-grade silicon, typically formed via the Czochralski or directional solidification process.5 These ingots are sliced into thin wafers that serve as the substrate for solar cell fabrication. In this process, doped regions and junctions are engineered to facilitate charge carrier separation and enable the conversion of incident solar radiation into electrical energy via the PV effect.6 Figure 1 depicts the manufacturing process for a PV panel.The <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/icpms/library?mainauthorItems=10&amp;search=8900">Agilent 8900 Triple Quadrupole ICP-MS (ICP-QQQ)</a> is an advanced analytical platform engineered for ultratrace elemental analysis in high-purity materials such as polysilicon used in PV manufacturing. Its unique tandem mass spectrometry (MS/MS) configuration—comprising two quadrupoles (Q1 and Q2) separated by a collision/reaction cell—enables exceptional control over ion selection and reaction chemistry. Q1 acts as a mass filter to isolate target precursor ions, allowing only specific m/z values into the cell, while Q2 analyzes product ions formed after controlled reactions with gases such as O2, H2, or NH3. This design effectively eliminates complex spectral interferences, including polyatomic and isobaric overlaps that are particularly problematic in high-silicon matrices. As a result, the 8900 achieves sub-parts-per-trillion (ppt) detection limits for critical impurities like alkali and alkaline earth elements that are otherwise difficult to quantify accurately using conventional ICP-MS. Also, its high sensitivity, wide dynamic range, and robust plasma conditions ensure reliable quantification across varying concentration levels. These capabilities make the 8900 ICP-QQQ a useful instrument for QC and contamination monitoring in the semiconductor and solar industries, where even trace impurities can significantly impact PV cell efficiency and performance.<h4>Conclusion&nbsp;</h4>An Agilent 8900 ICP‑QQQ, configured with an s‑lens ion optics system to enhance ion transmission efficiency and sensitivity, was used for the simultaneous quantification of 58 trace and ultratrace elements in two polycrystalline silicon ingot samples. Sample preparation was carried out by acid extraction in accordance with the GB/T 24582‑2023 standard.&nbsp;Ultratrace detection at sub‑ppt levels was achieved using MS/MS (triple quadrupole) mode, utilizing multiple reaction gases to systematically mitigate spectral interferences via mass‑shift and on‑mass reaction pathways. This approach enabled selective removal of polyatomic interferences commonly associated with silicon matrices, thereby improving analyte selectivity and lowering background noise. The method exhibited strong analytical precision, with relative standard deviations (RSDs) below 10% across six replicate measurements, indicating consistent signal stability, efficient interference control, and robust instrumental performance.&nbsp;The 0.1 µg/L spike‑recovery results within ± 20% confirmed the accuracy of the quantification. The internal standard recoveries verified stable instrument performance and effective correction for matrix‑induced signal variation, further supporting reliable multi‑element analysis of high‑purity silicon. This level of reliability is essential for maintaining accuracy at sub‑ppb levels in challenging silicon matrices.&nbsp;The 8900 ICP-QQQ method is well aligned with the demands of advanced manufacturing environments. It is particularly suited to PV production, where precise and reproducible impurity monitoring is vital for ensuring material quality, optimizing process control, and preserving device performance.<h3>2. LECO: Metallography of Aluminum and Aluminum Alloys</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/pdf/METALLOGRAPHY_ALUMINUM_ALUMINUM_ALLOY_203_821_722_c024278c37.pdf">Full PDF for download</a></li></ul>Aluminum has become a widely used material due to its natural corrosion resistance (oxide layer), manageable weight, high thermal conductivity, and cost-effective machinability. Pure Aluminum is too soft for structural use, so it is often alloyed with other metals such as Copper, Magnesium, Silicon, Zinc, and Manganese to increase its strength and durability for aerospace, automotive, and construction applications. Metallography is an important tool for verifying quality control properties in these materials, including grain size, intermetallic phases, precipitates, and porosity, all of which affect mechanical properties, corrosion resistance, and electrical conductivity. LECO offers complete metallographic solutions made to streamline and optimize every step of the sample preparation process from start to finish.<h4>Sample Sectioning&nbsp;</h4>With any metallographic sample, the most critical step of sample preparation is sectioning. The goal of sectioning is to remove a suitable-sized sample from a larger component with the least amount of deformation. If done incorrectly, thermal damage may occur to the sample's surface, requiring extra steps in the grinding/polishing phase. It could even affect the sample's microstructure, resulting in skewed image analysis results. In extreme cases, it may even require an operator to resection the sample, leading to additional costs and loss of valuable time. To increase efficiency, it is important to choose the correct blade and fixture for your sample.&nbsp;LECO recommends the use of a Silicon Carbide blade (SiC) for sectioning Aluminum alloys, as they are designed for soft non-ferrous metals, allowing minimal deformation and efficient heat dissipation. The SiC abrasives prevent smearing and tearing, outperforming harder Iron-focused blades on Aluminum structure. LECO offers a variety of fixturing options to accommodate even the most difficult geometries for sectioning (Figures 4 and 5). Fixturing the sample properly is critical to stabilize the sample to prevent unnecessary vibrations and release of the sample during the cutting process.&nbsp;If thermal degradation occurs after taking these necessary measures, it could be the sectioning method. Although chop cutting (Z-Axis) is the traditional form of operation with sectioning saws, it may be advantageous to try a pulse or planar cut that would provide more relief in the process. This could also be the case for an Aluminum part with complex geometry.<h4>Conclusion&nbsp;</h4>In summary, Aluminum and its alloys remain essential to modern engineering due to their lightweight nature, corrosion resistance, and adaptability. Ensuring these materials meet the demanding requirements of aerospace, automotive, and structural applications depends on precise metallographic evaluation. By characterizing grain structures, intermetallic phases, precipitates, and porosity, metallography provides critical insight into material performance, durability, and quality.&nbsp;LECO supports this process with a full suite of metallographic solutions designed to enhance efficiency and consistency at every stage of preparation. From robust sectioning systems that ensure clean, controlled cuts, to reliable mounting equipment that protects and preserves sample integrity, LECO enables repeatable, high-quality preparation. Our advanced grinding and polishing platforms deliver uniform, scratch-free surfaces ready for evaluation, while our comprehensive image analysis software provides accurate, data-driven characterization of microstructural features. Together, these tools offer a streamlined, end-to-end workflow that empowers laboratories to maintain stringent quality control and achieve confident, repeatable results.<h3>3. Shimadzu: Analysis of Trace and Major Elements in Steel by ICP-AES</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/pdf/an_01_01072_en_736a917a5f.pdf">Full PDF for download</a></li></ul><h5>User benefits</h5><ul><li>The ICPE-9820 enables analysis across a wide concentration range, from trace to major elements in steel.&nbsp;</li><li>Using a torch for high-salt samples and a water bubbler can suppress salt deposition when analyzing high-salt samples.&nbsp;</li><li>The use of a vacuum spectrometer enables rapid startup and quick analysis in the vacuum ultraviolet region (wavelengths below 190 nm).</li></ul>Steel materials are widely used in a diverse range of industries, including construction, transportation, and machinery manufacturing, and are indispensable in modern society. Steel contains various elements, and the types and concentrations of these elements significantly influence its properties. Accordingly, elemental analysis is essential for quality assurance and performance control.&nbsp;The elements in steel range from trace constituents to major components, with concentrations spanning a broad range from mg/L levels to percentage levels. Inductively coupled plasma atomic emission spectrometry (ICP-AES) is well suited to the analysis of elements across such a wide concentration range. It enables highly accurate quantitative analysis from trace elementsto major components.&nbsp;This Application News presents an analysis example of a stainless-steel certified reference material using the Shimadzu ICPE-9820 multi-type ICP atomic emission spectrometer.<h4>Analysis Conditions&nbsp;</h4>The <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/icpms/library?mainauthorItems=1&amp;search=ICPE-9820">ICPE-9820</a> enables simultaneous analysis using two view orientations: axial view (AX), which offers higher sensitivity, and radial view (RD), which is suitable for high-concentration analysis.&nbsp;For major element analysis, quantification was performed using the calibration curve method with the internal standard method. For trace element analysis, quantification was performed using the standard addition method.<h4>Conclusion&nbsp;</h4>In this Application News, trace and major elements in a stainless-steel certified reference material were analyzed using the ICPE-9820. The measured values showed good agreement with the certified values.&nbsp;The sample introduction system, consisting of a torch for highconcentration salt solution samples and a water bubbler, effectively prevented sensitivity loss from salt deposition. At the same time, the use of a Twister spray chamber enabled finer particle-size selection, thereby improving analytical accuracy for high-salt samples.&nbsp;In addition, the ICPE-9820 employs a vacuum spectrometer, enabling rapid startup and fast analysis in the vacuum ultraviolet region (wavelengths below 190 nm).<h3>4. Thermo Fisher Scientific: Rapid, accurate field analysis of phosphate ores with handheld XRF</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/pdf/field_analysis_of_phosphate_ores_an1912_en_b0cb5ab9ec.pdf">Full PDF for download</a></li></ul><h5>The need for rapid phosphate ore analysis&nbsp;</h5>Phosphate rock (phosphorite) is the primary source of phosphorus used in fertilizers, making it indispensable to global food production. As high-grade phosphorite deposits become increasingly depleted, mining operations must process lower-grade and more compositionally variable phosphate ores. This trend places greater emphasis on rapid, accurate elemental analysis to support exploration, grade control, process optimization, and compliance with environmental regulations. Handheld X-ray fluorescence (HHXRF) has become a key analytical tool for these applications by providing fast, non-destructive, multi-element analysis directly in the field or at the production site.<h5>Handheld XRF for rapid phosphate ore analysis&nbsp;</h5>Handheld X-ray fluorescence (HHXRF) analyzers have emerged as valuable tools for on-site elemental analysis of the major and penalty elements in phosphate ores. The analyzers’ portability, ease of use, and ability to deliver analytical results within seconds make them ideal for rapid decision-making in mining exploration as well as mining operations for guiding extraction, stockpile management, quality control and environmental monitoring. While handheld XRF does not replace laboratorygrade analysis for certification purposes, it provides immediate compositional information that can significantly improve operational efficiency.&nbsp;The <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/products/1992">Thermo Scientific™ Niton™ XL5 Plus Handheld XRF Analyzer </a>(Figure 1a) combines a compact, lightweight design with advanced analytical performance for field-based elemental analysis. Featuring a 5 W / 50 kV / 500 µA max. proprietary X-ray tube and a large-area silicon drift detector (SDD) with a graphene window, the Niton XL5 Plus analyzer delivers accurate elemental analysis across all stages of mining and exploration. The Mining Mode on the XL5 Plus analyzer can measure 41 elements, from magnesium (Mg) to uranium (U), using four optimized excitation conditions to enhance the signal-to-noise ratios of fluorescence lines across the full energy spectrum. Mining Mode uses a proprietary fundamental parameter (FP) based algorithm that accounts for the high variability of sample composition by correcting for matrix absorption and secondary enhancement effects; this improves analytical accuracy across a wide range of sample compositions. Users can optimize settings of Mining Mode and store that group of preferred settings under Profiles. Profiles enable users to have multiple analytical methods on the same instrument; the most appropriate profile for a given task can be easily selected to perform desired measurements quickly.<h4>Key findings&nbsp;</h4>The Niton XL5 Plus handheld XRF analyzer provides rapid, accurate, multi-element analysis of phosphate ores, enabling informed decision-making throughout exploration, mining, and fertilizer production. Combined with appropriate sample preparation, the analyzer delivers excellent agreement with certified laboratory values for both major constituents and critical penalty elements such as uranium and cadmium. By providing immediate analytical results at the point of need, the Niton XL5 Plus analyzer helps improve ore characterization, optimize process control, and reduce reliance on timeconsuming laboratory analyses.

News from LabRulezICPMS Library - Week 44, 2026

Article

Application

Video

Scientists

Interview

Science and research

Since its establishment in 2011, CEITEC has quickly developed into a cutting-edge infrastructure for research which performs highly alongside the best institutes in Europe. Among the main priorities of CEITEC are the promotion of a motivating and dynamic international scientific environment, the provision of state-of-the-art research infrastructure, and the policy of open communication and equal opportunities.

CEITEC

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Organomation, founded in 1959, designs and manufactures high-quality nitrogen evaporators and extraction systems. Known for innovation and durability, their lab instruments are used globally for efficient sample preparation with strong customer support.

Organomation

Polyscience DuraChill Turbine Pump Chillers

Organomation recommend the new DuraChill line from PolyScience to all looking for a recirculating chiller to complement their S-EVAP or ROT-X-TRACT.

In some applications, cold tap water is enough to keep your condensers cool during routine sample preparation procedures. However, depending on the testing performed in your laboratory, a recirculating chiller system may be recommended to allow your solvent evaporator or extractor to operate as efficiently as possible.Organomation is proud to recommend the new DuraChill line from PolyScience to all customers looking for a recirculating chiller to complement their S-EVAP or ROT-X-TRACT.The recirculating chiller we recommend for your specific case depends on the number of condensers being cooled at one time:<ul><li>For systems with up to 12 condensers, we recommend the Chiller Cat# 17760-C2T, priced at $6,982.25.</li><li>For systems with up to 18 condensers, the optimal choice is Chiller Cat# 17760-C3T, priced at $7,421.00.</li><li>For larger systems with up to 24 condensers, we recommend the Chiller Cat# 17760-C5T, available for $7,841.00.</li></ul>As distributors of PolyScience, we carry these units at the same list price as the manufacturer to allow our customers to purchase a complete evaporator or extraction solution in one place.<h4>Standard features</h4><ul><li>Large, full-color touchscreen display with intuitive interface</li><li>Compact, portable design takes up less floor space</li><li>Cooling at ambient temperatures as high as 86 °F (30 °C)</li><li>Powerful turbine pump</li><li>Front fill reservoir</li><li>DynamicFilter™ self-cleaning filter system</li><li>Ultraviolet anti-biological light system</li><li>Liquid level monitoring to prevent pump failure</li><li>User-adjustable temperature, pressure, and flow rate alarms</li></ul><h4>KEY SPECS</h4><ul><li>Working Temperature: -10° to +70 °C</li><li>Temperature Stability: ±0.1 °C</li><li>Cooling Capacity: 600 to 1290 watts @ 10 °C</li><li>Maximum Pressure: Up to 90 psi (6.2 bar)</li><li>Maximum Flow: Up to 3.5 gpm (13.2 lpm)</li></ul>Detailed specifications of all three models are located in the Specifications section below. Specifications are for 120V, 60Hz systems. Units for 240V / 50Hz are available upon request.<h4>Specification</h4><h5>Available Models &amp; Catalog Numbers</h5><ul><li>17760-C2T – Recommended for systems with up to 12 condensers</li><li>17760-C3T – Recommended for systems with up to 18 condensers</li><li>17760-C5T – Recommended for systems with up to 24 condensers</li></ul><h5>Shared Performance Specifications</h5><ul><li>Temperature Range: –10 °C to 70 °C</li><li>Temperature Stability: ±0.1 °C</li><li>Pump Type: Turbine</li><li>Gas Manifold Layout: Single Ring</li><li>Maximum Pressure: 90 psi</li><li>Maximum Flow Rate: 3.50 gallons per minute (gpm)</li><li>Electrical Requirements:<ul><li>C2T: 120 V / 60 Hz / 13.7 A</li><li>C3T: 120 V / 60 Hz / 16.3 A</li><li>C5T: 120 V / 60 Hz / 17.4 A</li></ul></li><li>Shipping Weight (all models): 169 lbs (76.7 kg)</li></ul><h5>Cooling Capacity at 10 °C</h5><ul><li>17760-C2T: 600 W</li><li>17760-C3T: 900 W</li><li>17760-C5T: 1290 W</li></ul>

GT SCIEN TOGA Puri Intelligent Standing

GT SCIEN TOGA® Puri Intelligent Standing provides room-wide laboratory air purification. TOGA® filters remove toxic gases and VOCs, while automatic monitoring adjusts fan speed without external ductwork.

The GT SCIEN TOGA® Puri Intelligent Standing is an intelligent, floor-standing toxic gas purifier designed to maintain cleaner and safer air throughout laboratory environments. Equipped with advanced TOGA® filtration technology, it effectively removes harmful gases, volatile organic compounds (VOCs), acidic and basic gases, and unpleasant odors generated during laboratory activities or released from stored chemicals.Combining high purification efficiency, automatic air quality monitoring, and a ductless design, the system provides a practical solution for laboratories seeking to improve air quality without installing additional ventilation infrastructure.<h3>Key Features and Benefits</h3><ul><li>High Purification Efficiency: Removes over 99.7% of toxic gases, VOCs, acidic and basic gases, and unpleasant odors.</li><li>Room-Wide Air Purification: Designed for effective air purification across laboratory spaces of up to 79.2 m².</li><li>Intelligent Air Quality Monitoring: Continuously monitors VOC levels and automatically adjusts fan speed to maintain appropriate laboratory air quality.</li><li>Advanced TOGA® Filtration Technology: Combines physical adsorption, chemical reactions, and neutralization to capture and eliminate a broad range of gaseous contaminants.</li><li>Ductless Operation: Operates independently of external ductwork and HVAC systems, helping reduce installation costs and energy losses.</li><li>Intuitive Touch Panel: Provides convenient access to operating settings, including five fan speed levels and automatic operation.</li><li>Integrated Timer Function: Enables scheduled operation for specific periods, supporting efficient energy consumption.</li><li>Low-Noise Design: Incorporates a sound-absorbing melamine board and anti-vibration pad to minimize operational noise.</li><li>Chemical-Resistant Motor: Provides reliable suction performance in demanding laboratory environments.</li><li>Mobile Design: Equipped with caster wheels for convenient repositioning within the laboratory.</li><li>Extended Filter Service Life: Designed for sustained purification efficiency, with a recommended filter replacement interval of approximately one year, depending on operating conditions.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/GT_SCIEN_TOGA_Puri_Intelligent_Standing_3_dd7d4069a7.jpg" alt="GT SCIEN TOGA Puri Intelligent Standing" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_GT_SCIEN_TOGA_Puri_Intelligent_Standing_3_dd7d4069a7.jpg 168w," sizes="100vw" width="508" height="472"><h3>TOGA® Triple Action Filtration Technology</h3>At the heart of the system is GT SCIEN's patented TOGA® Toxic Gas Purification Filter Technology, developed specifically for laboratory environments where conventional air purifiers may not provide adequate protection against chemical contaminants.Unlike traditional activated carbon filters that primarily rely on physical adsorption, TOGA® filters use Triple Action Technology™, combining three complementary purification mechanisms:<ul><li>Physical Adsorption: Captures gaseous contaminants within the filter material.</li><li>Chemical Reactions: Converts targeted chemical contaminants through reactions with specialized filtration media.</li><li>Neutralization Reactions: Neutralizes acidic and basic gases to reduce their harmful effects.</li></ul>This combination provides effective removal of various laboratory gases and odors while helping minimize filter breakthrough and maintain filtration performance over extended periods.The filtration process is designed to operate without generating ozone or other harmful byproducts.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/GT_SCIEN_TOGA_Puri_Intelligent_Standing_22823797fb.jpg" alt="GT SCIEN TOGA Puri Intelligent Standing" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_GT_SCIEN_TOGA_Puri_Intelligent_Standing_22823797fb.jpg 245w," sizes="100vw" width="858" height="370"><h3>Intelligent Air Quality Management</h3>The TOGA® Puri Intelligent Standing incorporates automatic VOC monitoring to respond to changing laboratory conditions.When VOC concentrations change, the system automatically adjusts the fan speed to provide the required level of air purification. Users can also select from five airflow settings through the integrated touch control panel.An additional timer function allows operation to be scheduled according to laboratory working hours and specific requirements.<h3>Ductless Design and Environmental Benefits</h3>The system operates without external exhaust ducting, making it suitable for laboratories where installing or modifying ventilation infrastructure would be difficult or costly.By purifying contaminated air without exhausting it outdoors, the ductless design helps reduce environmental emissions and prevents unnecessary losses of conditioned laboratory air.This approach also supports more efficient maintenance of laboratory temperature and humidity while reducing the energy demands associated with conventional exhaust ventilation.<h3>Applications</h3>The GT SCIEN TOGA® Puri Intelligent Standing is suitable for a wide range of environments where chemical vapors, toxic gases, and odors may occur.<ul><li>Chemical and Analytical Laboratories: Removal of harmful gases released during sample preparation, experimental procedures, and chemical handling.</li><li>Laboratories Without Dedicated Ventilation: Air purification in workspaces where installing external ductwork is impractical.</li><li>Anatomical and Animal Testing Laboratories: Reduction of VOCs, formaldehyde vapors, and unpleasant odors.</li><li>3D Printing Facilities: Removal of gaseous byproducts, VOCs, ozone, and fine particulate contaminants generated during 3D printing processes.</li><li>Fine Arts and Materials Laboratories: Removal of fumes and gases associated with paints, solvents, oils, toners, sprays, and other chemicals.</li><li>Chemical Handling and Transportation Areas: Reduction of potentially harmful gases released during chemical storage, handling, or transportation.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/GT_SCIEN_TOGA_Puri_Intelligent_Standing_2_b6c53bf399.jpg" alt="GT SCIEN TOGA Puri Intelligent Standing " srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_GT_SCIEN_TOGA_Puri_Intelligent_Standing_2_b6c53bf399.jpg 245w," sizes="100vw" width="1191" height="502"><h3>Technical Specifications</h3><ul><li>Model: TOGA-S02D</li><li>Dimensions (W × D × H): 500 × 450 × 1770 mm</li><li>Purification Efficiency: Over 99.7% of toxic gases, VOCs, acids, bases, and foul odors</li><li>Filter Replacement Period (Recommended): 1 year (dependent upon type and concentration of gases)</li><li>Air Volume: –</li><li>Applicable Room Area: 79.2 m²</li><li>Power Consumption: 169 W</li><li>Voltage, Frequency: AC 220 V, 50/60 Hz</li><li>Air Velocity Control: 5 levels</li><li>Weight: 110 kg</li></ul>

GT SCIEN TOGA Puri Intelligent Portable 

GT SCIEN TOGA® Puri Intelligent Portable captures toxic gases and VOCs at their source. It features a 360° extraction arm, TOGA® filtration and automatic fan speed control.

The GT SCIEN TOGA® Puri Intelligent Portable is a mobile toxic gas purification system designed to capture and remove hazardous gases directly at their source. Equipped with a flexible 360° extraction arm and advanced TOGA® filtration technology, it effectively removes toxic gases, volatile organic compounds (VOCs), acidic and basic gases, and unpleasant odors generated during laboratory activities.Unlike conventional room air purifiers, the TOGA® Puri Intelligent Portable can be positioned close to the point of experimentation, capturing harmful fumes before they spread throughout the laboratory. Its mobile, ductless design combines efficient local extraction, intelligent air quality monitoring, and convenient operation without requiring connection to an external ventilation system.<h3>Key Features and Benefits</h3><ul><li>High Purification Efficiency: Removes over 99.7% of toxic gases, VOCs, acidic and basic gases, and unpleasant odors.</li><li>Source-Level Toxic Gas Extraction: Captures hazardous gases directly where they are generated, helping reduce their dispersion into the laboratory environment.</li><li>360° Flexible Extraction Arm: Allows precise positioning of the extraction hood near the source of chemical vapors and fumes.</li><li>Intelligent Air Quality Monitoring: Monitors VOC concentrations and automatically adjusts fan speed according to laboratory air quality.</li><li>Advanced TOGA® Filtration Technology: Combines physical adsorption, chemical reactions, and neutralization to remove a broad range of gaseous contaminants.</li><li>Ductless Operation: Requires no external exhaust ductwork or connection to an HVAC system, offering flexibility in laboratory installation and use.</li><li>Intuitive Touch Panel: Provides convenient control of operating parameters, including five fan speed levels and automatic operation.</li><li>Integrated Timer Function: Enables scheduled operation for specific periods to support efficient energy consumption.</li><li>Chemical-Resistant Motor: Delivers reliable suction performance in laboratory environments involving chemical vapors and gases.</li><li>Portable Design: Features an ergonomically shaped handle and durable 360° caster wheels for convenient movement between workstations.</li><li>Automatic Power Cord Reel: Retracts the power cord for safe and convenient storage when the equipment is not in use.</li><li>Extended Filter Service Life: Designed to maintain high filtration performance, with a recommended filter replacement interval of approximately one year, depending on operating conditions.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/GT_SCIEN_TOGA_Puri_Intelligent_Portable_1e6ac0520d.jpg" alt="GT SCIEN TOGA Puri Intelligent Portable " srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_GT_SCIEN_TOGA_Puri_Intelligent_Portable_1e6ac0520d.jpg 184w," sizes="100vw" width="576" height="489"><h3>TOGA® Triple Action Filtration Technology</h3>At the heart of the system is GT SCIEN's patented TOGA® Toxic Gas Purification Filter Technology, developed specifically for laboratory environments where conventional air purifiers may not provide adequate protection against chemical contaminants.Unlike traditional activated carbon filters that primarily rely on physical adsorption, TOGA® filters use Triple Action Technology™, combining three complementary purification mechanisms:<ul><li>Physical Adsorption: Captures gaseous contaminants on the surface of the filtration material.</li><li>Chemical Reactions: Contribute to the removal of gaseous contaminants through chemical reactions.</li><li>Neutralization Reactions: Neutralize acidic and basic gases to reduce their harmful effects.</li></ul>This combination enables effective removal of a wide range of laboratory gases and odors while helping minimize contaminant breakthrough and maintain filtration performance over extended periods.The filtration process is designed to operate without generating ozone or other harmful byproducts.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/GT_SCIEN_TOGA_Puri_Intelligent_Standing_22823797fb.jpg" alt="GT SCIEN TOGA Puri Intelligent Portable " srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_GT_SCIEN_TOGA_Puri_Intelligent_Standing_22823797fb.jpg 245w," sizes="100vw" width="858" height="370"><h3>Intelligent Air Quality Management</h3>The TOGA® Puri Intelligent Portable incorporates automatic VOC monitoring to respond to changing laboratory conditions.Based on measured VOC concentrations, the system automatically regulates fan speed and adjusts extraction performance to current air quality conditions. Users can also manually select from five fan speed levels through the integrated touch control panel.An additional timer function allows operation to be scheduled according to laboratory working hours and specific requirements.<h3>Ductless Design and Environmental Benefits</h3>The system operates without external exhaust ducting, making it particularly suitable for laboratories where installing or modifying ventilation infrastructure would be difficult or costly.By capturing and purifying contaminated air directly at the source, the TOGA® Puri Intelligent Portable helps reduce the release of hazardous gases into the surrounding workspace.Its ductless design also minimizes the discharge of pollutants into the outdoor environment and reduces energy losses associated with conventional exhaust ventilation. This approach supports more efficient maintenance of laboratory temperature and humidity.Thanks to its compact construction, flexible extraction arm, and caster wheels, the system can be easily repositioned to accommodate different experiments and laboratory workstations.<h3>Applications</h3>The GT SCIEN TOGA® Puri Intelligent Portable is suitable for laboratories and other workspaces where localized extraction of chemical vapors, toxic gases, and unpleasant odors is required.<ul><li>Chemical and Analytical Laboratories: Extraction of harmful gases released during sample preparation, laboratory experiments, and chemical handling.</li><li>Laboratories with Limited Ventilation Options: Localized gas extraction in workspaces where installing external exhaust ductwork is impractical.</li><li>Anatomical and Animal Testing Laboratories: Reduction of VOCs, formaldehyde vapors, and unpleasant odors generated during laboratory procedures.</li><li>3D Printing Facilities: Extraction of gaseous byproducts, VOCs, ozone, and fine particulate contaminants produced during 3D printing.</li><li>Fine Arts and Materials Laboratories: Removal of vapors and gases released from paints, solvents, oils, toners, sprays, and other chemicals.</li><li>Chemical Handling and Transportation Areas: Localized extraction of potentially harmful gases released during chemical handling, transfer, or temporary storage.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/GT_SCIEN_TOGA_Puri_Intelligent_Standing_2_b6c53bf399.jpg" alt="GT SCIEN TOGA Puri Intelligent Portable " srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_GT_SCIEN_TOGA_Puri_Intelligent_Standing_2_b6c53bf399.jpg 245w," sizes="100vw" width="1191" height="502"><h3>Technical Specifications</h3><ul><li>Model: TOGA-M01D</li><li>Dimensions (W × D × H): 400 × 400 × 960 mm</li><li>Purification Efficiency: Over 99.7% of toxic gases, VOCs, acids, bases, and foul odors</li><li>Filter Replacement Period (Recommended): 1 year (actual filter life may vary according to use, concentration and quantities of reagents stored)</li><li>Air Volume: 10 m³/min</li><li>Applicable Room Area: –</li><li>Power Consumption: 169 W</li><li>Voltage, Frequency: AC 220 V, 50/60 Hz</li><li>Air Velocity Control: 5 levels</li><li>Weight: 65 kg</li></ul>

GT SCIEN TOGA Fridge – Completely Closed Laboratory Refrigerator

GT SCIEN TOGA® Fridge is a completely enclosed reagent refrigerator with uniform air circulation and TOGA® toxic gas filtration. Available in 500 L and 1050 L versions, it operates at 2–10 °C.

The GT SCIEN TOGA® Fridge is a completely enclosed laboratory refrigerator designed for the safe storage of temperature-sensitive chemical reagents. Combining an advanced air circulation system with TOGA® toxic gas filtration technology, it maintains uniform storage temperatures while removing harmful gases and unpleasant odors released by chemicals stored inside the refrigerator.Its enclosed construction, carefully controlled airflow, and integrated filtration system help create a safer laboratory environment while providing practical and organized refrigerated reagent storage.<h3>Key Features and Benefits</h3><ul><li>Completely Enclosed Construction: Helps prevent the release of hazardous chemical vapors and unpleasant odors from the refrigerated storage compartment.</li><li>Uniform Temperature Distribution: An advanced fan-assisted air circulation system maintains consistent temperatures throughout the storage compartment.</li><li>Integrated TOGA® Filtration Technology: Removes toxic gases and odors generated by chemicals stored inside the refrigerator.</li><li>Optimized Airflow Design: Combines vertical airflow with front suction fans and perforated shelves to distribute refrigerated air throughout the storage space.</li><li>Condensation Prevention: Double-tempered glass and heated glazing help prevent condensation on the refrigerator door.</li><li>Adjustable Shelving: Height-adjustable shelves accommodate different reagent containers and storage requirements.</li><li>Integrated Safety Bars: Help prevent reagent containers from tipping or falling during storage and handling.</li><li>Ergonomic Door Handle: A long, easy-to-grip handle provides convenient access to stored reagents.</li><li>Mobile Design: Caster wheels allow convenient repositioning within the laboratory.</li><li>Ductless Air Purification: The integrated filtration system operates without requiring connection to an external exhaust system.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/GT_SCIEN_TOGA_Fridge_Completely_Closed_Laboratory_Refrigerator_6d9a9478be.jpg" alt="GT SCIEN TOGA Fridge – Completely Closed Laboratory Refrigerator" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_GT_SCIEN_TOGA_Fridge_Completely_Closed_Laboratory_Refrigerator_6d9a9478be.jpg 187w," sizes="100vw" width="558" height="466"><h3>Advanced Temperature Control and Air Circulation</h3>The TOGA® Fridge incorporates an innovative air circulation system designed to maintain uniform temperatures throughout the refrigerated storage compartment.Cold air flows vertically along the rear of the compartment toward the bottom of the refrigerator. It then circulates upward toward the front suction fans, passing through perforated shelves to distribute cooled air throughout the storage space.This continuous circulation helps minimize temperature differences between storage levels and provides consistent cooling conditions for refrigerated laboratory reagents.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/GT_SCIEN_TOGA_Fridge_Completely_Closed_Laboratory_Refrigerator_2_7fe93ebb50.jpg" alt="GT SCIEN TOGA Fridge – Completely Closed Laboratory Refrigerator" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_GT_SCIEN_TOGA_Fridge_Completely_Closed_Laboratory_Refrigerator_2_7fe93ebb50.jpg 76w," sizes="100vw" width="292" height="601"><h3>TOGA® Triple Action Filtration Technology</h3>The refrigerator incorporates GT SCIEN's patented TOGA® Toxic Gas Purification Filter Technology, designed to remove harmful gases and unpleasant odors generated by stored laboratory chemicals.Unlike traditional activated carbon filters that primarily rely on physical adsorption, TOGA® filters use Triple Action Technology™, combining three complementary purification mechanisms:<ul><li>Physical Adsorption: Captures gaseous contaminants on the surface of the filtration material.</li><li>Chemical Reactions: Contribute to the removal of gaseous contaminants through chemical reactions.</li><li>Neutralization Reactions: Neutralize acidic and basic gases to reduce their harmful effects.</li></ul>The combination of these mechanisms helps maintain effective gas purification while reducing the risk of contaminant breakthrough and supporting longer filter service life.The filtration process is designed to operate without generating ozone or other harmful byproducts.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/GT_SCIEN_TOGA_Puri_Intelligent_Standing_22823797fb.jpg" alt="GT SCIEN TOGA Fridge – Completely Closed Laboratory Refrigerator" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_GT_SCIEN_TOGA_Puri_Intelligent_Standing_22823797fb.jpg 245w," sizes="100vw" width="858" height="370"><h3>Safe and Practical Reagent Storage</h3>The completely enclosed construction of the TOGA® Fridge combines refrigerated chemical storage with integrated toxic gas purification.The internal filtration system helps prevent harmful gases released by stored reagents from escaping into the surrounding laboratory environment.Adjustable shelves provide flexibility for different container sizes, while integrated safety bars help reduce the risk of accidental spills. Double-tempered glass and condensation-prevention features improve visibility into the storage compartment.Together, these features support safer, more convenient, and better-organized refrigerated storage of laboratory chemicals.<h3>Technical Specifications</h3><h4>TOGA-GSR11P (Single-Door)</h4><ul><li>Model: TOGA-GSR11P</li><li>Exterior Dimensions (W × D × H): 640 × 850 × 1930 mm</li><li>Interior Dimensions (W × D × H): 550 × 700 × 1300 mm</li><li>Volume: 500 L</li><li>Temperature Distribution: ±2 °C</li><li>Temperature Range: 2–10 °C</li><li>Refrigerant: R-134a</li><li>Compressor: 1/3 HP</li><li>Condenser: 1/3 HP</li><li>Evaporator: 1/3 HP</li><li>Defrosting: Automated defrosting</li><li>Controller: 7-segment LED display (temperature control and alarm function)</li><li>Reagent Management System: –</li><li>Voltage, Frequency: AC 220 V, 50/60 Hz</li><li>Power Consumption: 850 W</li><li>Filter Replacement Period (Recommended): 1 year (actual filter life may vary according to use, concentration, and quantities of reagents stored)</li><li>Frame: High-density urethane foam</li><li>Number of Shelves: 5</li><li>Weight: 150 kg</li></ul><h4>TOGA-GSR12P (Double-Door)</h4><ul><li>Model: TOGA-GSR12P</li><li>Exterior Dimensions (W × D × H): 1260 × 850 × 1930 mm</li><li>Interior Dimensions (W × D × H): 1170 × 700 × 1300 mm</li><li>Volume: 1050 L</li><li>Temperature Distribution: ±2 °C</li><li>Temperature Range: 2–10 °C</li><li>Refrigerant: R-134a</li><li>Compressor: 1/2 HP</li><li>Condenser: 1/3 HP</li><li>Evaporator: 1/3 HP</li><li>Defrosting: Automated defrosting</li><li>Controller: 7-segment LED display (temperature control and alarm function)</li><li>Reagent Management System: –</li><li>Voltage, Frequency: AC 220 V, 50/60 Hz</li><li>Power Consumption: 1030 W</li><li>Filter Replacement Period (Recommended): 1 year (actual filter life may vary according to use, concentration, and quantities of reagents stored)</li><li>Frame: High-density urethane foam</li><li>Number of Shelves: 10</li><li>Weight: 200 kg</li></ul>

GT SCIEN TOGA Fridge Premium – Premium Completely Closed Laboratory Refrigerator

GT SCIEN TOGA® Fridge Premium is an enclosed laboratory refrigerator for safe chemical reagent storage, combining ±1 °C temperature uniformity with TOGA® toxic gas filtration.

The GT SCIEN TOGA® Fridge Premium is a completely enclosed laboratory refrigerator designed for the safe storage of temperature-sensitive chemical reagents. Equipped with patented reagent refrigeration technology and advanced TOGA® toxic gas filtration, it provides uniform temperature distribution throughout the refrigerated compartment while removing harmful gases and unpleasant odors released by stored chemicals.Combining optimized internal airflow, a completely enclosed air circulation system, and effective gas purification, the TOGA® Fridge Premium helps maintain stable storage conditions and reduce the risk of laboratory exposure to hazardous chemical vapors.<h3>Key Features and Benefits</h3><ul><li>Completely Enclosed Construction: Helps prevent the release of hazardous chemical vapors and unpleasant odors from the refrigerated storage compartment.</li><li>Precise Temperature Distribution: Patented reagent refrigeration technology maintains temperature uniformity of ±1 °C throughout the storage compartment.</li><li>Optimized Airflow Design: An advanced internal circulation system distributes cooled air vertically and horizontally to maintain consistent storage temperatures.</li><li>Integrated TOGA® Filtration Technology: Removes toxic gases and odors generated by chemicals stored inside the refrigerator.Controlled Internal Air Circulation: A completely enclosed airflow system helps limit the release of harmful gases into the laboratory, including when the refrigerator door is opened.</li><li>Condensation Prevention: Double-tempered glass and heated glazing help prevent condensation on the refrigerator door.</li><li>Height-Adjustable Shelves: Allow flexible organization of reagent containers of different sizes.</li><li>Integrated Safety Bars: Help prevent reagent containers from tipping or falling during storage and handling.</li><li>Ergonomic Door Handle: A long, easy-to-grip handle provides convenient access to stored reagents.</li><li>Mobile Design: Caster wheels allow convenient repositioning within the laboratory.</li><li>Ductless Air Purification: The integrated filtration system operates without requiring connection to external exhaust ductwork.</li><li>Extended Filter Service Life: Designed for sustained filtration efficiency, with a recommended filter replacement interval of approximately one year, depending on operating conditions.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/GT_SCIEN_TOGA_Fridge_Premium_Premium_Completely_Closed_Laboratory_Refrigerator_1f6923fa3c.jpg" alt="GT SCIEN TOGA Fridge Premium – Premium Completely Closed Laboratory Refrigerator" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_GT_SCIEN_TOGA_Fridge_Premium_Premium_Completely_Closed_Laboratory_Refrigerator_1f6923fa3c.jpg 203w," sizes="100vw" width="576" height="442"><h3>Patented Reagent Refrigeration Technology</h3>The TOGA® Fridge Premium incorporates a patented refrigeration system with an optimized airflow design to maintain consistent temperatures throughout the refrigerated storage compartment.Cooled air is directed vertically along the side of the storage compartment and distributed horizontally through the perforated shelving structure. This arrangement enables air to circulate across the compartment, helping minimize temperature differences between individual storage levels.The system provides a specified temperature distribution of ±1 °C, supporting stable storage conditions for refrigerated laboratory reagents.The completely enclosed internal circulation design also helps prevent harmful gases released by stored chemicals from escaping into the laboratory environment when the refrigerator door is opened.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/GT_SCIEN_TOGA_Fridge_Premium_Premium_Completely_Closed_Laboratory_Refrigerator_2_ae876b0f61.jpg" alt="GT SCIEN TOGA Fridge Premium – Premium Completely Closed Laboratory Refrigerator" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_GT_SCIEN_TOGA_Fridge_Premium_Premium_Completely_Closed_Laboratory_Refrigerator_2_ae876b0f61.jpg 128w," sizes="100vw" width="476" height="582"><h3>TOGA® Triple Action Filtration Technology</h3>The refrigerator incorporates GT SCIEN's patented TOGA® Toxic Gas Purification Filter Technology, designed to remove harmful gases and unpleasant odors generated by stored laboratory chemicals.Unlike traditional activated carbon filters that primarily rely on physical adsorption, TOGA® filters use Triple Action Technology™, combining three complementary purification mechanisms:<ul><li>Physical Adsorption: Captures gaseous contaminants on the surface of the filtration material.</li><li>Chemical Reactions: Contribute to the removal of gaseous contaminants through chemical reactions.</li><li>Neutralization Reactions: Neutralize acidic and basic gases to reduce their harmful effects.</li></ul>The combination of these mechanisms helps maintain effective gas purification while reducing the risk of contaminant breakthrough and supporting longer filter service life.The filtration process is designed to operate without generating ozone or other harmful byproducts.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/GT_SCIEN_TOGA_Puri_Intelligent_Standing_22823797fb.jpg" alt="GT SCIEN TOGA Fridge Premium – Premium Completely Closed Laboratory Refrigerator" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_GT_SCIEN_TOGA_Puri_Intelligent_Standing_22823797fb.jpg 245w," sizes="100vw" width="858" height="370"><h3>Safe and Practical Reagent Storage</h3>The completely enclosed construction of the TOGA® Fridge Premium combines precise temperature control with integrated toxic gas purification.The internal filtration and air circulation systems work together to maintain refrigerated storage conditions while helping prevent harmful gases released by stored reagents from escaping into the laboratory environment.Height-adjustable shelves provide flexibility for different reagent container sizes, while integrated safety bars help reduce the risk of accidental tipping, falling, or spills. Double-tempered glass and condensation-prevention features improve visibility into the refrigerated compartment.The ductless design eliminates the need for external exhaust connections, providing installation flexibility while helping reduce energy losses associated with conventional ventilation systems.Together, these features support safer, more convenient, and well-organized refrigerated storage of laboratory chemicals.<h3>Technical Specifications</h3><ul><li>Model: TOGA-GSR01</li><li>Exterior Dimensions (W × D × H): 880 × 795 × 2070 mm</li><li>Interior Dimensions (W × D × H): 660 × 560 × 1450 mm</li><li>Volume: 536 L</li><li>Temperature Distribution: ±1 °C</li><li>Temperature Range: 2–12 °C</li><li>Refrigerant: R-134a</li><li>Compressor: 1/3 HP</li><li>Condenser: 1/2 HP</li><li>Evaporator: 1/2 HP</li><li>Defrosting: Automated defrosting</li><li>Controller: 7-segment LED display (temperature control)</li><li>Reagent Management System: –</li><li>Voltage, Frequency: AC 220 V, 50/60 Hz</li><li>Power Consumption: 800 W</li><li>Filter Replacement Period (Recommended): 1 year (actual filter life may vary according to use, concentration, and quantities of reagents stored)</li><li>Frame: White foam</li><li>Number of Shelves: 5</li><li>Weight: 300 kg</li></ul>

Products from category Laboratory equipment focused on Laboratory equipment - page 1

Related content

Hybrid Metabolomics Explained: Bridging Targeted & Untargeted MS with Bruker's Matthew Lewis

Leukaemia Cells Respond to Treatment by Turning Themselves into a Target

News from LabRulezICPMS Library - Week 44, 2026