<div><p><strong>Understanding how to read the resulting data of high-performance liquid chromatography (HPLC) helps turn raw detector output into confident decisions about purity, identity, and assay results. When you know how to read HPLC peaks and baselines, you can quickly spot problems, verify method performance, and support regulatory‑ready reports.</strong></p></div><div><div><div><div><h3><strong>What is an HPLC Chromatogram?</strong></h3></div></div></div></div><div><p>An HPLC chromatogram is a plot of detector signal versus time that shows how each compound in your sample moves through the column and reaches the detector. Every peak corresponds to a different component, with the position on the time axis giving its retention time and the peak size relating to concentration.</p><p>In routine work, you read retention time to confirm identity and rely on peak area or height for concentration, so learning how to read an HPLC chromatogram is essential for everyday assay workflows.</p></div><div><div><div><div><h3><strong>Why Is It Important to Read HPLC Chromatograms Correctly?</strong></h3><p>Reading HPLC results correctly matters because retention time and peak response are key parameters for separating, identifying, and quantifying compounds in complex mixtures. Misreading the baseline or peak shape can distort area integration, which affects assay accuracy and impurity quantitation.</p><p>Good <a target="_blank" rel="noopener noreferrer" href="https://www.phenomenex.com/resources/knowledge-center/hplc-knowledge-center/what-are-chromatograms"><strong>chromatogram</strong></a> interpretation also helps you detect method drift early, keep system suitability within limits, and avoid costly repeat injections or failed batches.</p></div></div></div></div><div><div><div><div><h3><strong>Key Components of an HPLC Chromatogram</strong></h3></div></div></div></div><div><p>Before you interpret a run, you must recognize the fundamental parts of a chromatogram. Each visual element gives you specific data about the separation and the analytes present in your sample.</p><h4><strong>Baseline</strong></h4><p>The baseline is the detector signal when no analyte peak is eluting, and a stable, flat baseline makes integration and quantification reliable. More detailed descriptions of baseline noise and drift are covered in the troubleshooting section below. In a nutshell, it is enough to note that any instability can affect how confidently you integrate and compare peaks.</p><h4><strong>Peaks</strong></h4><p>Peaks represent eluting analytes and appear as Gaussian‑like shapes rising above the baseline. Symmetric peaks with clear separation are easier to integrate and give more reliable responses for quantitative work.</p><h4><strong>Retention Time</strong></h4><p>Retention time, <i>t</i><sub>R</sub>, is the time from injection until the apex of a peak, reflecting how long an analyte spends in the column compared with the mobile phase. The solvent front or void peak corresponds to the dead time, <i>t</i><sub>0</sub>, which is the passage of unretained material through the system.</p><h4><strong>Peak Area and Height</strong></h4><p>Peak area is generally more reliable than peak height for quantitative analysis, because it better reflects the total amount of analyte passing the detector. In validated methods, you relate peak area or, in some cases, peak height to concentration through calibration curves and internal standards.</p><h4><strong>Resolution</strong></h4><p>Resolution describes how well two peaks are separated and depends on efficiency, selectivity, and retention. Adequate resolution means peaks do not overlap significantly, which improves identification confidence and quantification for closely eluting impurities.</p><h4><strong>Dead Time (t₀)/Void Time</strong></h4><p>Dead time, <i>t</i><sub>0</sub>, or hold‑up time, <i>t</i><sub>M</sub> (or void time), is the time taken by unretained species or the mobile phase front to pass through the column and reach the detector. You use <i>t</i><sub>0</sub> as the reference for calculating capacity factor and for assessing how strongly analytes interact with the stationary phase.</p></div><div><div><div><div><h3><strong>Step‑by‑Step Guide to Reading an HPLC Chromatogram</strong></h3></div></div></div></div><div><p>Interpreting your data requires a systematic approach to guarantee you capture all critical details. Follow this sequential process to evaluate your chromatographic results confidently and accurately.</p><h4><strong>Identify the Baseline Stability</strong></h4><p>Start by checking if the baseline is flat or if you see random noise and slow drift across the run. Significant drift or high noise suggests issues with temperature control, solvent quality, or detector stability, which must be addressed before trusting quantitation.</p><h4><strong>Locate and Count Peaks</strong></h4><p>Next, scan the chromatogram to locate all distinct peaks above the baseline and note their relative sizes. Counting peaks versus expectations from standards or sample composition helps you detect co‑elution, extra peaks, or missing analytes.</p><h4><strong>Determine Retention Time</strong></h4><p>Measure retention time, <i>t</i><sub>R</sub>, for each peak and record these values alongside known standards or system-suitability data. Consistent <i>t</i><sub>R</sub> values within defined windows support correct identification, while larger shifts can indicate changes in temperature, mobile phase composition, or flow rate.</p><h4><strong>Calculate Capacity Factor (k') Using t<sub>M</sub> and t<sub>R</sub></strong></h4><p>Capacity factor, <i>K'</i> (or retention factor), describes how much longer an analyte is retained compared with unretained material and is calculated from the chromatogram. Using the dead time, <i>t</i><sub>M</sub>, (void peak) and analyte retention time, <i>t</i><sub>R</sub>, you apply<strong> </strong><i><strong>k</strong></i><strong> = (</strong><i><strong>t</strong></i><strong><sub>R</sub> – </strong><i><strong>t</strong></i><strong><sub>M</sub>)/</strong><i><strong>t</strong></i><strong><sub>M</sub></strong> to assess whether the analyte is sufficiently retained under the chosen conditions.</p><p>Knowing how to analyze HPLC results with capacity factor helps you judge if peaks elute too close to <i>t</i><sub>0</sub>, or spend an appropriate time interacting with the column, which guides method refinement.</p><h4><strong>Analyze Peak Area for Quantification (H3)</strong></h4><p>For quantification, integrate each peak to obtain the area and compare it with calibration standards or internal standards to calculate concentration. Reliable peak area measurements depend on good baseline definition and stable detector response, so always verify baseline quality before finalizing your measurements.</p><h4><strong>Evaluate Peak Shape and Resolution</strong></h4><p>Assess whether peaks are symmetric or show tailing, fronting, or broadening, and examine spacing between adjacent peaks for resolution. Changes in peak shape across the chromatogram can reveal extra‑column effects, packed bed issues, or interaction with active sites on the stationary phase.</p><p>If you see persistent problems, review your <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/lcms/products?category=48&amp;manufacturerItems=50"><strong><u>HPLC column</u></strong></a> choice, sample preparation, and gradient or isocratic settings to refine separation.</p></div><div><div><div><div><h3><strong>Common Problems in HPLC Chromatograms and How to Identify Them</strong></h3><p>Even well-developed methods can degrade over time and produce visual cues that signal system or chemistry faults. Recognizing these characteristic peak and baseline distortions is your first step in troubleshooting.</p><h4><strong>Peak Tailing</strong></h4><p><a target="_blank" rel="noopener noreferrer" href="https://www.phenomenex.com/resources/knowledge-center/hplc-knowledge-center/how-to-reduce-peak-tailing-in-hplc"><strong><u>Peak tailing</u></strong></a> appears when the right side of a peak stretches out into a long tail instead of dropping back to the baseline symmetrically. On the chromatogram, the trailing edge slopes slowly and the peak looks skewed to the left, which makes integration boundaries less obvious and can hint at dispersion or secondary interactions. You can reduce tailing by minimizing extra‑column volume and checking column packing and active sites.</p><h4><strong>Peak Fronting</strong></h4><p><a target="_blank" rel="noopener noreferrer" href="https://www.phenomenex.com/resources/knowledge-center/hplc-knowledge-center/peak-fronting"><strong><u>Peak fronting</u></strong></a> shows a steep leading edge and a compressed front portion of the peak, so the apex seems pulled forward relative to the rest of the peak profile. Visually, the peak looks like it is leaning in the direction of flow and the front overlaps more strongly with neighboring peaks, which can distort apparent purity for fast‑eluting components.</p><p>Consider lowering sample load or injection volume and matching diluent strength to the mobile phase, and when fronting persists, consult Phenomenex resources on <a target="_blank" rel="noopener noreferrer" href="https://www.phenomenex.com/resources/knowledge-center/gc-knowledge-center/peak-shape-problems-tailing-peaks"><strong><u>peak-shape problems</u></strong></a>.</p><h4><strong>Noise and Drift</strong></h4><p>Baseline noise appears as small, rapid fluctuations around the baseline that make it harder to see low‑level peaks. Baseline drift shows up as a slow rise or fall of the baseline across the run, so the line no longer stays flat; this can cause apparent changes in peak height and shifts in where you draw integration baselines. Simple checks like improving solvent degassing, stabilizing temperature, and cleaning detector flow cells help reduce noise and drift.</p><h4><strong>Co‑Elution</strong></h4><p>Co‑elution is easy to spot when two peaks do not fully separate and instead form a shoulder or merged profile on the chromatogram.You may see one peak with a plateau or a visible kink where two components overlap, and the valley between them does not return to the baseline, which complicates assignments for closely eluting impurities. To resolve co‑elution, adjust selectivity by changing mobile phase composition, gradient profile, or column chemistry.</p><h4><strong>Broad Peaks</strong></h4><p>Broad peaks have a noticeably wider base and lower height compared with well‑focused peaks of similar are. They often span more time units on the x‑axis and show gentle slopes on both sides, indicating band spreading that reduces resolution and makes small shoulders harder to detect. Narrowing broad peaks usually involves reducing extra‑column volumes and confirming column performance and particle size suitability.</p><h4><strong>Retention-Time Shifting</strong></h4><p>Retention-time shifting is seen when all peaks move earlier or later in the chromatogram compared with previous runs, while their shapes remain similar. When you overlay chromatograms, consistent shifts in peak positions along the time axis, often on the order of a few percent, indicate changes in conditions such as temperature or mobile phase that must be tracked carefully. Fixing retention time shifts starts with stabilizing temperature and verifying mobile phase composition and flow rate settings across runs.</p></div></div></div></div><div><div><div><div><h3><strong>Tips for Accurate HPLC Chromatogram Interpretation</strong></h3></div></div></div></div><div><p>To read HPLC chromatograms accurately, maintain a stable temperature, use well‑degassed mobile phases, and keep detector flow cells and optics clean. Regularly check capacity factor and selectivity values against method expectations, and verify that resolution is adequate for critical pairs before accepting results.</p><p>When retention times drift or peak shapes degrade, review your <a target="_blank" rel="noopener noreferrer" href="https://www.phenomenex.com/resources/knowledge-center/gc-knowledge-center/understanding-retention-time"><strong><u>retention-time</u></strong></a> trends alongside system maintenance logs so you can correct problems early.</p></div><div><div><div><div><h3><strong>FAQs on Reading HPLC Chromatograms</strong></h3></div></div></div></div><div><h4><strong>How Do You Calculate Capacity Factor (k') from a Chromatogram?</strong></h4><p>Capacity factor, <i>k</i>, is calculated using the analyte retention time, [Equation], and the dead time, <i>t</i><sub>R</sub>, measured from the unretained peak. Apply <i>k</i> = (<i>t</i><sub>R</sub> – <i>t</i><sub>M</sub>)/<i>t</i><sub>M</sub>, so higher k values indicate stronger interactions with the stationary phase and longer retention.</p><h4><strong>How Is Selectivity (α) Calculated Using Chromatogram Data?</strong></h4><p>Selectivity (α) describes how well two components are separated and is defined as the ratio of their retention factors, α = <i>k</i><sub>2</sub>/<i>k</i><sub>1</sub>, for peaks, where <i>k</i><sub>2</sub> &gt; <i>k</i><sub>1</sub>. Values higher than 1.2 show separation, and larger α values correspond to better selectivity between the peaks.</p><h4><strong>What Does Peak Area Indicate in HPLC?</strong></h4><p>Peak area reflects the total amount of analyte that reaches the detector and is generally more reliable than peak height for quantitative work. Build calibration curves that relate peak area to concentration, then apply them only when the baseline and detector response remain stable across all injections.</p><h4><strong>How Is Retention Time Used in HPLC Analysis?</strong></h4><p>Retention time is used as a qualitative index because each compound elutes at a characteristic time when conditions are held constant. Compare sample retention times with those of standards and then pair that information with peak area or height to confirm identity and calculate concentration in routine analyses.</p></div>

How to Read an HPLC Chromatogram: Step‑by‑Step Guide to Interpreting Results

<p><i><span><strong>Are you currently using single-column batch chromatography to isolate and purify target compounds, but struggling with high solvent demand, low product concentration, or limited throughput? Simulated Moving Bed chromatography offers an alternative approach that can address many of these limitations through continuous multi-column separation.</strong></span></i></p><h4><span><strong>What is Simulated Moving Bed Chromatography (SMB)?</strong></span></h4><p><span>Simulated Moving Bed (SMB) chromatography is a continuous multi-column separation technique designed to make more efficient use of the stationary phase while minimizing solvent consumption. It is particularly well suited to the purification of binary and pseudo-binary mixtures, including enantiomers, sugars, petrochemical products, and fine chemicals.</span></p><h4><span><strong>Conventional Batch Chromatography</strong></span></h4><p><span>In traditional batch chromatography, the sample is introduced onto a single chromatographic column and transported through the stationary phase by the mobile phase. Individual compounds interact with the stationary phase to different extents and therefore travel through the column at different rates:</span></p><ul><li><span>Weakly retained compounds migrate more rapidly.</span></li><li><span>Strongly retained compounds move through the column more slowly.</span></li></ul><p><span>The separated substances consequently leave the column at different retention times and can be collected as individual fractions (Fig. 1). Before a new sample is normally introduced, the previous sample must be completely eluted and the column prepared for the next separation.</span></p><p><span>Although single-column batch chromatography is versatile and comparatively easy to operate, several disadvantages become increasingly important at production scale. The stationary phase is not continuously involved in useful separation, which can limit productivity. Other drawbacks include substantial solvent consumption, diluted product fractions, repeated column regeneration, and potential loss of valuable product.</span></p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Figure_1_Single_column_separation_A_fast_eluting_component_B_retaining_component_cda8ef66ef.jpg" alt="KNAUER: Figure 1: Single column separation; A – fast eluting component, B – retaining component" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Figure_1_Single_column_separation_A_fast_eluting_component_B_retaining_component_cda8ef66ef.jpg 76w," sizes="100vw" width="394" height="800"></p><h4><span><strong>From True Moving Bed to SMB</strong></span></h4><p><span>The principle behind SMB originates from the theoretical <strong>True Moving Bed (TMB)</strong> process. In an ideal TMB system, the liquid mobile phase and the solid stationary phase continuously travel in opposite directions. This counter-current arrangement takes advantage of differences in the affinity of individual compounds toward the two phases.</span></p><p><span>Consider a binary mixture containing components A and B. Component A interacts more strongly with the stationary phase, whereas component B is less strongly retained and preferentially follows the liquid mobile phase. Under appropriate operating conditions, the two substances effectively migrate in opposite directions and can be collected continuously through separate outlets (Fig. 2).</span></p><p><span>While this concept is highly efficient from a theoretical perspective, continuously moving a packed solid chromatographic adsorbent is technically difficult to realize.</span></p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Figure_2_True_Moving_Bed_concept_e1eac66028.jpg" alt="KNAUER: Figure 2: True Moving Bed concept" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Figure_2_True_Moving_Bed_concept_e1eac66028.jpg 186w," sizes="100vw" width="954" height="800"></p><p><span>Four process ports divide the system into four functional zones (Zone I–IV):</span></p><ol><li><span>Eluent (desorbent) inlet</span></li><li><span>Extract outlet</span></li><li><span>Feed inlet</span></li><li><span>Raffinate outlet</span></li></ol><p><span>Feed and eluent are introduced continuously, while two product streams are simultaneously withdrawn:</span></p><ul><li><span><strong>Extract</strong> – the strongly retained, later-eluting component</span></li><li><span><strong>Raffinate</strong> – the less strongly retained, earlier-eluting component</span></li></ul><h4><span><strong>The Four Functional Zones</strong></span></h4><p><span>Each of the four zones has a defined purpose and operates at its own internal flow rate (VI–VIV):</span></p><ul><li><span><strong>Zone I</strong> regenerates the stationary phase.</span></li><li><span><strong>Zone II</strong> prevents the weakly retained component from entering the extract stream.</span></li><li><span><strong>Zone III</strong> prevents the strongly retained component from contaminating the raffinate.</span></li><li><span><strong>Zone IV</strong> enables recovery and internal reuse of the remaining solvent.</span></li></ul><h4><span><strong>How is the TMB Principle Implemented in SMB?</strong></span></h4><p><a target="_blank" rel="noopener noreferrer" href="https://www.knauer.net/smb"><span>SMB</span></a><span> eliminates the need to physically move the stationary phase. Instead, the adsorbent remains fixed inside the chromatographic columns, while the positions of the liquid inlet and outlet ports are periodically shifted.</span></p><p><span>From the perspective of these moving connection points, the stationary phase appears to travel in the opposite direction to the liquid phase. SMB therefore reproduces the counter-current behavior of a TMB system without physically transporting the packed adsorbent (Fig. 3).</span></p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Figure_3_Transfer_TMB_concept_to_SMB_concept_e4b8905269.jpg" alt="KNAUER: Figure 3: Transfer TMB concept to SMB concept" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Figure_3_Transfer_TMB_concept_to_SMB_concept_e4b8905269.jpg 245w," sizes="100vw" width="1372" height="800"></p><p><span>A typical SMB setup consists of several chromatographic columns arranged in a closed loop. A standard configuration often uses eight columns, although the number can be adapted according to the application.</span></p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Figure_4_SMB_concept_fb005cdfa1.jpg" alt="KNAUER: Figure 4: SMB concept" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Figure_4_SMB_concept_fb005cdfa1.jpg 195w," sizes="100vw" width="1001" height="800"></p><p><span>After a predefined switching time, all inlet and outlet positions move forward by one column in the direction of the mobile-phase flow. The columns themselves stay in place, but their functional roles within the process change.</span></p><p><span>By repeatedly shifting the ports, the system creates the effect of a stationary phase moving counter-currently to the mobile phase. With eight columns, eight switching steps are required to complete one full SMB cycle.</span></p><p><span>Following an initial transition period, the process reaches a cyclic steady state. Concentrations continue to fluctuate during individual switching intervals, but the overall concentration profile repeats after every complete cycle.</span></p><p><span>Increasing the number of columns and reducing the size of individual switching steps allows the SMB system to reproduce ideal TMB behavior more closely. Systems containing fewer columns exhibit more pronounced discrete switching effects and can require more sophisticated dynamic modeling during process development.</span></p><h3><span><strong>What are the Main Advantages of SMB?</strong></span></h3><h4><span><strong>1. Continuous Operation and Higher Productivity</strong></span></h4><p><span>The key benefit of SMB chromatography is continuous operation. Feed and eluent enter the system continuously, while purified extract and raffinate streams are removed at the same time.</span></p><p><span>As a result, SMB systems can operate for prolonged periods—from several days to even several weeks—with very limited interruption.</span></p><p><span>Because several chromatographic columns perform different separation functions simultaneously, the stationary phase is utilized much more effectively than in conventional batch chromatography. This can translate into higher productivity, improved process efficiency, and a continuous supply of purified product.</span></p><h4><span><strong>2. Reduced Solvent Consumption</strong></span></h4><p><span>Conventional batch chromatography can require substantial volumes of mobile phase to achieve separation and product recovery. The collected fractions are often highly diluted, creating an additional need for downstream concentration.</span></p><p><span>SMB maintains concentration profiles within the circulating system and uses the mobile phase more efficiently. Partial internal recycling of solvent is an inherent part of the process.</span></p><p><span>Lower solvent consumption can lead to:</span></p><ul><li><span>Reduced raw-material costs</span></li><li><span>Lower volumes of liquid waste</span></li><li><span>Reduced energy requirements for solvent evaporation</span></li><li><span>More concentrated product streams and less downstream concentration</span></li></ul><h4><span><strong>3. High Recovery and Reproducible Product Quality</strong></span></h4><p><span>Once the process reaches cyclic steady state, SMB can continuously generate product streams with stable and reproducible composition.</span></p><p><span>Additional advantages can include high product recovery, lower product dilution, more efficient use of the stationary phase, and straightforward integration into continuous manufacturing strategies.</span></p><h4><span><strong>What are the Differences Between Batch LC and SMB?</strong></span></h4><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_differences_between_batch_LC_and_SMB_eba3897f65.jpg" alt="KNAUER: Differences between batch LC and SMB" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_differences_between_batch_LC_and_SMB_eba3897f65.jpg 245w," sizes="100vw" width="1061" height="638"></p><h4><span><strong>Where is SMB Used?</strong></span></h4><p><span>SMB technology is established across several industries and can be applied to purification processes ranging from gram-scale production to several tons per day (Fig. 5).</span></p><p><span>Typical and emerging applications include:</span></p><ul><li><span>Sugar purification</span></li><li><span>Petrochemical separations</span></li><li><span>Chiral separations</span></li><li><span>Fine chemical production</span></li><li><span>Pharmaceutical intermediates</span></li><li><span>Selected biomolecule separations</span></li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Figure_5_SMB_application_areas_7109ff703f.jpg" alt="KNAUER: Figure 5: SMB application areas; author's illustration" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Figure_5_SMB_application_areas_7109ff703f.jpg 245w," sizes="100vw" width="1500" height="512"></p><h4><span><strong>Limitations of SMB</strong></span></h4><p><span>Although SMB can provide substantial advantages, it is not necessarily the ideal solution for every chromatographic separation.</span></p><p><span>The instrumentation and process configuration are more complex than conventional single-column chromatography. Several pumps, valves, columns, and liquid pathways must be controlled precisely. Successful method development therefore requires a solid understanding of adsorption equilibria, mass-transfer effects, and fluid dynamics.</span></p><p><span>Classical four-zone SMB is primarily intended for binary and pseudo-binary separations. More complicated mixtures may require modified SMB configurations, additional purification steps, or multiple coupled SMB systems.</span></p><p><span>SMB is generally most economically attractive when relatively large quantities of a consistent feed material are processed continuously over extended periods.</span></p><p><span>Batch chromatography can remain the better option for small-scale production, frequent changes between products, complex multicomponent mixtures, or applications that depend on flexible gradient separations.</span></p><h4><span><strong>Conclusion</strong></span></h4><p><span>Simulated Moving Bed chromatography converts the theoretical counter-current principle of True Moving Bed separation into a practical continuous chromatographic process. Instead of physically transporting the stationary phase, SMB periodically changes the positions of the feed, eluent, extract, and raffinate connections. This reproduces the effect of counter-current movement between stationary and mobile phases.</span></p><p><span>Compared with conventional batch chromatography, SMB can provide higher productivity, more efficient stationary-phase utilization, substantially lower solvent consumption, and more concentrated product streams. Continuous operation makes the technology particularly attractive for demanding large-scale binary separations, including the purification of pharmaceutical enantiomers.</span></p><p><span>Although successful SMB implementation requires accurate process data, careful method development, and precise control of operating conditions, the technology demonstrates how an idealized chromatographic principle can be transformed into a robust and efficient industrial separation strategy.</span></p>

Simulated Moving Bed Chromatography: Efficient Continuous Separation

News from LabRulezLCMS Library - Week 44, 2026

Article

Application

Academy

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Phenomenex is a global technology leader committed to developing novel analytical chemistry solutions that solve the separation and purification challenges of researchers in industrial, government and academic laboratories.

Phenomenex

Based in Berlin, KNAUER is a medium-sized, owner-managed company that has been serving the sciences since 1962. We develop and manufacture scientific instruments of superior quality for liquid chromatography, including: Analytical HPLC/UHPLC, Preparative HPLC, Fast protein liquid chromatography (FPLC), Multi-column chromatography/Simulated moving bed (SMB) chromatography. High pressure dosing, in-line detection systems, and osmometry are additional business areas.

KNAUER

Watrex SYRINGE FILTERS

Syringe filters (filters for syringes) are a universal tool that ensures sample purity and prevents contamination of analytical instruments.

<p><strong>Syringe filters (filters for syringes) are a universal tool that ensures sample purity and prevents contamination of analytical instruments. They are single-use filters used for precise filtration of liquids before their application or analysis.</strong></p><p><strong>Pore Size: </strong>Filters come in various pore sizes, ranging from 0.2 μm to 5 μm, depending on the required level of filtration. Smaller pores (e.g., 0.22 μm) are often used for sterilizing solutions, as they capture bacteria and other microorganisms.</p><p>We offer syringe filters in the following sizes: <strong>4 mm, 13 mm, 25 mm, and 30 mm</strong>, all available with pore sizes of <strong>0.22 μm and 0.45 μm</strong>.</p><p><strong>Filter Material:</strong> Syringe filters are made from different materials that are compatible with various sample types. It is important to select the correct filter material based on the chemical composition of the sample. We offer syringe filters made from the following materials:</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Watrex_SYRINGE_FILTRY_b6ffda00e2.jpg" alt="Watrex: Watrex SYRINGE FILTERS" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Watrex_Watrex_SYRINGE_FILTRY_b6ffda00e2.jpg 245w," sizes="100vw" width="1808" height="1017"></p><h4><strong>Nylon</strong></h4><ul><li>Suitable for <strong>aqueous solutions</strong> and most <strong>organic solvents</strong>.</li><li>It has strong <strong>mechanical stability</strong> and excellent chemical compatibility with <strong>esters, bases, phenols, and alcohols.</strong></li></ul><h4><strong>PTFE (Polytetrafluoroethylene)</strong></h4><ul><li>Chemically resistant to most <strong>organic solvents</strong>.</li><li>It has very broad chemical and thermal compatibility.</li><li>PTFE filters are recommended for <strong>strong acids and bases</strong> and are excellent for filtration and degassing chromatography.</li></ul><h4><strong>PVDF (Polyvinylidene fluoride)</strong></h4><ul><li>Suitable for <strong>biological samples</strong>.</li><li>It has good <strong>chemical resistance</strong> and low UV absorption.</li><li>Commonly used for filtering all water-based samples and most solvents.</li></ul><h4><strong>PES (Polyester)</strong></h4><ul><li>Ideal for <strong>water-based samples</strong>, especially <strong>biological ones</strong>, with a fast and high flow rate.</li></ul><h4><strong>MCE (Mixed Cellulose Esters)</strong></h4><ul><li>Ideal for <strong>aqueous samples</strong>, <strong>tissue cultures</strong>, and <strong>sensitive biological samples</strong>.</li><li>It has lower chemical resistance, excellent water flow, and a better cutoff effect.</li></ul><h4><strong>PP (Polypropylene)</strong></h4><ul><li>Ideal for filtering all water-based samples and most solvents.</li><li>Used for general <strong>filtration of biological samples</strong>, <strong>solvents</strong>, <strong>deionized water</strong>, and reducing biological load.</li><li>It has good thermal compatibility.</li></ul><h5><strong>Examples of Use:</strong></h5><ol><li><strong>Sterilization of solutions: </strong>Filtration can remove bacteria and other microorganisms from solutions.</li><li><strong>Sample purification: </strong>Samples are filtered before analysis to remove solid particles that could contaminate analytical instruments or affect analysis results.</li><li><strong>Preparation for chromatography:</strong> Filtration before entering devices like HPLC (High-Performance Liquid Chromatography) to ensure sample purity.</li></ol><p><strong>You can also visit the full range of syringe filters on the </strong><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/?s=syringe+filters&amp;post_type=product&amp;dgwt_wcas=1?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>Watrex website</strong></a><strong>.</strong></p>

Watrex BioWorks WorkBeads resins and GoBio Mini columns

Watrex Praha is the official distributor of Bio-Works, a leading global manufacturer of chromatographic resins designed for the purification of biopharmaceuticals.

<p><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>Watrex Praha</strong></a> is the official distributor of Bio-Works, a leading global manufacturer of chromatographic resins designed for the purification of biopharmaceuticals. This partnership brings high-quality products to the Czech market, widely used in biotechnology and the pharmaceutical industry.</p><p>The main product of Bio-Works is <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>WorkBeads </strong></a>resins, manufactured using a patented agarosebased method. These resins are characterized by excellent mechanical stability, uniform bead size distribution, and high separation efficiency. They are available both as loose resins and in prepacked columns, making them easy to use in various applications.</p><p>For efficient small-scale purification and process development screening, <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>GoBio Mini</strong></a> columns are the ideal solution. These prepacked columns are available in 1 ml and 5 ml sizes, facilitating quick and effective biomolecule separations.</p><p>Bio-Works products are used in bioprocess solutions focused on the purification and analysis of biomolecules, including monoclonal antibodies, proteins, peptides, oligonucleotides, viruses, and vaccines. These technologies offer top-tier quality and precision, ensuring optimal capacity and product purity.</p><h3><strong>Types of sorbents:</strong></h3><h4><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/affinity-chromatography/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>Affinity chromatography resins</strong></a></h4><p><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/affinity-chromatography/affinity-sorbents/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>WorkBeads™ affimAb</strong></a> is an optimized alkali-stable protein A resin designed for purification of monoclonal- and polyclonal antibodies in laboratory to process scale. This resin has a superior base matrix combined with a patented, alkali-stable protein A ligand, which results in high dynamic binding capacity at short residence times. This resin binds over 40 mg IgG/mL resin also at as short residence time as 2.5 min. Available also in prepacked 1 mL and 5 mL <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/affinity-chromatography/affinity-columns/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>GoBio™ Mini </strong></a>columns.</p><h4><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/ion-exchange-chromatography/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>Ion exchange chromatography (IEX) resins</strong></a></h4><p><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/ion-exchange-chromatography/iex-sorbents/"><strong>WorkBeads™ resins for ion exchange chromatography</strong></a> are designed for research and industrial scale purification of proteins, peptides and oligonucleotides by utilizing the difference in their surface charge. These resins demonstrate high-resolution separation while giving low backpressure to facilitate both capture and polishing purification applications in standard bioprocess columns.</p><ul><li><strong>WorkBeads 100S</strong> is a strong cation exchanger and will bind positively charged substances.</li><li><strong>WorkBeads 100Q</strong> is a strong anion exchanger and will bind negatively charged substances.</li><li><strong>WorkBeads 40S</strong> is a strong cation exchanger with sulfonate ligands and will bind positively<br>charged substances.&nbsp;</li><li><strong>WorkBeads 40Q</strong> is a strong anion exchanger with quaternary amine and will bind negatively charged substances.&nbsp;</li><li><strong>WorkBeads 40 DEAE</strong> is a weak anion exchanger with tertiary amine ligands (diethylaminoethyl) and is an alternative to WorkBeads 40Q when looking for alternative selectivities.</li></ul><p>Also available in pre-filled <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/ion-exchange-chromatography/iex-columns/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>GoBio™ Mini.</strong></a></p><h4><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/gel-filtration-sec/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>Size exclusion chromatography (SEC) resins</strong></a></h4><p><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/gel-filtration-sec/sec-sorbents/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>WorkBeads™ 40/100 SEC, WorkBeads 40/1000 SEC, WorkBeads 40/10 000 SEC, and</strong></a><br><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/gel-filtration-sec/sec-sorbents/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>WorkBeads Macro SEC resins</strong></a> are used for preparative size exclusion chromatography (SEC) in laboratory and process scale purification of proteins, viruses, and other biomolecules by utilizing the differences in their size. These resins are based on agarose, which is a biopolymer suitable for separation of biomolecules. WorkBeads resins are cross-linked using a proprietary method that results in a very rigid structure. Although the general recommendation for SEC is to use a low flow rate for best purification, the rigidity and tight particle size distribution allow for the purification of viruses and other large substances at a high flow rate for fast processing and high yields.</p><p>Produced using a proprietary cross-linking method that results in highly porous and physically stable matrices.</p><p>We have recently added two new Size Exclusion Chromatography (SEC) products that expand the range for more choice and flexibility in separating large particles. WorkBeads 200 SEC, with 180 μm beads, is suitable for viscous samples like serum and whole blood. WorkBeads Macro SEC resins extend the range of several resins with a bead size of 45 μm but different porosities, making it easy to change between them when different fractionation ranges are desired.</p><p><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/gel-filtration-sec/sec-sorbents/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>WorkBeads Dsalt resin</strong></a> is designed to enable quick and easy separations of high- and lowmolecular-weight substances. This resin is pre-swollen and enables efficient desalting and buffer exchange of proteins, large peptides, and nucleic acids.</p><p>Also available in pre-filled <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/gel-filtration-sec/sec-columns/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>GoBio™ Mini</strong></a>.</p><h4><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/hic-chromatography/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>Hydrophobic interaction chromatography (HIC) resins</strong></a></h4><p><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/hic-chromatography/hic-sorbents/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>WorkBeads™ 40 Butyl SH</strong></a> is a resin for hydrophobic interaction chromatography (HIC) designed for research and industrial scale purification of proteins, peptides, plasmids, and oligonucleotides by utilizing the difference in their surface hydrophobicity. It’s often used to complement other techniques that separate according to either charge or size.</p><p>The functional ligand of WorkBeads 40 Butyl SH is n-butyl thioether. Since butyl is a very<br>hydrophobic linear chain, minimal mixed-mode interactions are expected. The resin is optimized to offer reliable binding performance. The property of high-resolution separation, in combination with low backpressure, allows both capture and polishing purification applications in standard bioprocess columns. The resin is also available in several different ready-to-use prepacked column sizes, such as <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/hic-chromatography/hic-columns/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>GoBio™ Mini</strong></a> 1 mL and 5 mL, GoBio Screen 7 x 100 (3.8 mL), GoBio Prep 16 x 100 (20 mL) and 26 x 100 (53 mL) as well as GoBio Prod columns starting at 1 L. 5.&nbsp;</p><h4><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/imac-chromatography/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>Immobilized metal-ion affinity chromatography (IMAC) resins&nbsp;</strong></a></h4><p>There are three different chelating ligands that <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/imac-chromatography/imac-sorbents/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>WorkBeads IMAC resins</strong></a> are based on. First are WorkBeads IDA (iminodiacetic acid) and WorkBeads NTA (nitrilotriacetic acid), which can be charged or are pre-charged with four different metals (Ni2+, Co2+, Cu2+, and Zn2+). Different combinations of ligands and metals give unique selectivities. Pre-charged IDA and NTA-based IMAC resins can be stripped, cleaned, and recharged with fresh metal ions.&nbsp;</p><p>The third resin is WorkBeads NiMAC, a nickel pre-charged resin with very low nickel leakage and tolerant against chelating agents (EDTA) and reducing substances (DTT). This resin is optimal for the purification of, e.g. eukarytic cell feeds, which often containing these substances.</p><p>For optimization, an initial screening is recommended with the different WorkBeads IMAC resins to identify the optimal combination of ligand and metal ion.</p><p>Also available in pre-filled <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/imac-chromatography/imac-columns/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>GoBio™ Mini.</strong></a></p><h4><a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/activated-resins/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>Activated resins</strong></a></h4><p>Pre-activated resin enables successful, convenient immobilization of ligands without the need for complex syntheses or special equipment. We have developed two different pre-activated resins where the bromohydrin active group reacts with thiol, amino and hydroxyl groups of the substance to be coupled. Two different resin porosities are available to facilitate optimized coupling of ligands of different sizes, or to optimize the prepared affinity resin for target molecules of different sizes.</p><p><strong>Resin for coupling your own ligands:</strong></p><ul><li>Made from agarose, well established and well-known in the Biotechnology industry</li><li>Simple coupling procedures at ambient temperature</li><li>Stable at ambient temperature in aqueous solution and at neutral pH</li><li>Suitable for coupling of ligands containing sulphydryl, amino- or hydroxy group</li></ul><p>Available as <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/activated-resins/activated-sorbents/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>WorkBeadsTM sorbents</strong></a><strong> </strong>or in pre-filled <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/kategorie-produktu/bioprocessing-products/activated-resins/activated-columns/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>GoBio™ Mini</strong></a>.</p><p>For more information or a non-binding quote regarding BioWorks products, please contact us at <strong>watrex@watrex.com</strong> or visit our website <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>www.watrex.com</strong></a></p>

Products from category Consumables from Watrex Prague - page 1

Related content

News from LabRulezLCMS Library - Week 44, 2026

Simulated Moving Bed Chromatography: Efficient Continuous Separation

How to Read an HPLC Chromatogram: Step‑by‑Step Guide to Interpreting Results