Marketplace products in condition new - page 1

The Agilent G2587-67631 is a service Vortex Collision Cell for the Agilent 6575 Revident LC/Q-TOF. It uses nitrogen collision gas for CID fragmentation of selected precursor ions and forms a critical part of the MS/MS ion path between the quadrupole and TOF analyzer.

Agilent PL0890-0390 replacement nebulizer assembly for ELSD models G4261A, G4261B, and G7102A, designed for aerosol generation from LC effluent.

Agilent Vac Elut SPS 24 is a 24-position vacuum SPE manifold designed for parallel processing of up to 24 samples, with regulated vacuum control to manage flow through SPE cartridges. It includes a collection rack for 10 × 75 mm test tubes.

Agilent G1311-60007 vacuum pump for HPLC/UHPLC systems provides the vacuum required for mobile phase degassing and stable chromatographic performance.tubes.

The Agilent G2938-65800 MMA Board is an internal electronic service assembly for the Agilent 2100 Bioanalyzer platform. It is intended for professional repair, replacement of failed electronics, and refurbishment of used Bioanalyzer systems.

The Agilent G2938-65800 is a genuine MMA Board for the Agilent 2100 Bioanalyzer system. This complete internal PCB assembly is intended as a service replacement component for instrument repair and refurbishment.

The Agilent G4204-68712 is a genuine Seal Wash Pump Kit for the Agilent 1290 Infinity Quaternary Pump G4204A. It includes the peristaltic pump, motor, housing, tubing, and installation hardware required to service or restore the piston-seal wash system.

The purge valve seal cap for pump modules used in Agilent 1100, 1120, 1200, 1220, 1260, and 1290 LC systems. It is intended for service and maintenance and helps preserve reliable purge valve sealing and pump performance.

The Agilent G1313-87201 is a genuine stainless-steel needle assembly for G1313A and G1329A/B autosamplers used in Agilent 1100 and 1200 LC systems. It is compatible with needle seats G1329-87017 and G1329-87012 and is intended for autosampler service and maintenance.

Agilent 5062-8517 is a PTFE frit adapter for 1/8" OD (3.2 mm) tubing, designed for LC applications with the 5041-2168 20 µm solvent bottle inlet filter. Supplied as 4/pk.