Czech researchers from Charles University, Prague, led by Pavla Eliášová, have developed an advanced photocathode that helps convert the greenhouse gas carbon dioxide into pure ethanol using sunlight. The new technology solves a long-standing problem of material degradation in water, achieves record conversion efficiency, and opens the way toward sustainable production of green fuels.Converting carbon dioxide (CO2) into useful fuels using solar energy represents the holy grail of modern green chemistry. The device enabling this conversion is called a solar reactor. Its key element is a photocathode: a material that absorbs light and enables the chemical reaction. Cuprous oxide long appeared to be an ideal material because it is inexpensive, readily available, and excels at capturing solar rays. In practice, however, it faced a fundamental obstacle: in an aqueous environment under light, it transforms and degrades extremely rapidly—much like iron undergoing swift corrosion—and loses its functionality within just tens of minutes.The team from the Chemistry Section of the Faculty of Science, CU, led by Pavla Eliášová, in collaboration with Tomáš Hrbek from the Faculty of Mathematics and Physics, CU, resolved this issue by creating a unique "nano-sandwich". The scientists combined cuprous oxide with advanced two-dimensional materials called MXenes and, through precisely controlled heating, created an ultrathin layer of titanium dioxide on their surface. MXene modified in this way can rapidly drain electric charge from the cuprous oxide, thereby slowing down its decomposition. At the same time, it uses the charge further to convert carbon dioxide into liquid fuel."Surface-engineered MXene combined with cuprous oxide allowed us to unite the best of both materials. The copper base enables maximum utilization of light energy, while the conductive MXene framework ensures that the material remains active even after many hours of operation," explains research team leader Pavla Eliášová from the Chemistry Section of the Faculty of Science, Charles University.In laboratory tests, the new photocathode achieved a record solar-energy-to-ethanol conversion efficiency of 2,74 %. A crucial improvement is the formation of only a single product. While other systems often produce a mixture of byproducts, the material designed by the research team produces pure ethanol as its sole liquid product, which significantly simplifies its potential industrial application."This is a major step forward for us. On our laboratory scale, the system works very well and produces ethanol over many hours. In the next step, we want to further reinforce the stability of the entire photocathode and begin testing on a larger scale and under real daylight conditions," adds physical chemist Pavla Eliášová.The research was conducted within the international European project DESIRED (Horizon Europe), with support from the Charles University Research Centre (UNCE) and the L'Oréal-UNESCO For Women in Science program.<blockquote><h4>Article</h4><h4><a target="_blank" rel="noopener noreferrer" href="https://advanced.onlinelibrary.wiley.com/doi/10.1002/aenm.71469">Surface-Engineered Ti3C2Tx MXene/Cu2O Photocathodes for Highly Selective Photoelectrocatalytic CO2 Reduction to Ethanol</a></h4>Luis A. M. Carrascosa, Magdaléna Linková, Monika Remzová, Tomáš Hrbek, Pavla EliášováAdv. Energy Mater., 2026, 16, e71469<a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1002/aenm.71469">https://doi.org/10.1002/aenm.71469</a><h6>licenced under <a target="_blank" rel="noopener noreferrer" href="https://creativecommons.org/licenses/by/4.0/">CC-BY 4.0</a></h6></blockquote><h4>Abstract</h4>Cu2O is an inexpensive p-type semiconductor that promotes the photoelectrocatalytic CO2 reduction reaction (PEC CO2RR). While its low bandgap enables photoexcitation by visible light, long-term stability remains limited due to quick charge recombination and photocorrosion. Here, we enhanced charge separation and extraction by combining Cu2O with surface-engineered MXenes. In this novel architecture, TiO2 grows in situ on the surface of Ti3C2Tx and serves as a charge-transport layer, forming a junction with Cu2O. On the other side, the outer TiO2 surface exposed to the CO2-saturated electrolyte offers catalytically active sites for CO2 reduction. Acting as a central layer, the MXene conductive backbone provides an electronically continuous pathway for electron transport. In PEC CO2RR, the photocathode containing 50 wt.% of MXene and a balanced amount of TiO2 on the Ti3C2 surface outperformed the best Cu/CuxO-based systems operating in non-organic electrolytes reported in the literature. The FTO/Cu2O/ml-Ti3C2Tx-350-N2 photocathode reached 8.4&nbsp;µmol&nbsp;cm−2 h−1 ethanol production rate and 2.74% solar-to-ethanol efficiency after 2&nbsp;h. Moreover, pairing TiO2-MXene with Cu2O significantly stabilized the photocathode, which maintained 76% of the ethanol production rate after 6 h. Overall, our results establish surface-engineered Cu2O/TiO2-MXene heterostructures as a solid platform for highly selective, visible-light-driven ethanol production with significantly improved operational stability.

Researchers from Charles University, Prague, Have Developed a New Photocathode for Efficient Conversion of CO2 into Ethanol

<div><div>Protons play a central role in many chemical reactions in living organisms. In some cases, a proton may be shared between two nearby molecular groups rather than being localized on just one. This phenomenon can strongly influence the properties and reactivity of biomolecules and is important for enzyme function.</div></div><div>Researchers led by Hanns Christian Schewe (IOCB Prague and Heyrovský Institute of the CAS) together with Lukáš Tomaník (UCT Prague and Fritz Haber Institute of the Max Planck Society) have now investigated proton sharing in a range of biologically relevant polycarboxylic acids dissolved in water, including several molecules related to the citric acid cycle (Krebs cycle).Using liquid-jet X-ray photoelectron spectroscopy (LJ-PES), a technique that reveals the chemical environment of atoms in molecules dissolved in water, the team was able to probe the position of protons on an ultrafast time scale. Unlike techniques such as NMR, which provide a time-averaged picture, photoelectron spectroscopy captures the instantaneous distribution of protons and can therefore distinguish more directly between localized and shared states.The results showed significant proton sharing only in maleic acid dissolved in water. In contrast, protons remained mostly localized at individual carboxylic groups in succinic acid, fumaric acid, malic acid, glutaric acid and citric acid. This suggests that proton sharing is not a common feature of these molecules when they are freely dissolved in water.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/IOCB_Prague_Cropped_part_of_the_cover_by_Schewe_et_al_with_the_use_of_Nano_Banana_2_0_2_2a408dbeb5.webp" alt="IOCB Prague: Cropped part of the cover by Schewe et al. with the use of Nano Banana 2.0: Full cover by Schewe et al. with the use of Nano Banana 2.0." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_IOCB_Prague_Cropped_part_of_the_cover_by_Schewe_et_al_with_the_use_of_Nano_Banana_2_0_2_2a408dbeb5.webp 117w," sizes="100vw" width="1620" height="2154">The difference appears to be largely controlled by molecular geometry. In maleic acid, the two carboxylic groups are held close together, creating favorable conditions for proton sharing. More flexible molecules can adopt conformations in which the groups are farther apart, while water molecules form strong hydrogen bonds with them and favor localized protons.However, the situation may be different inside proteins. When a carboxylic acid binds in the active site of an enzyme, its shape and position can be tightly constrained. Such an environment could bring the relevant groups close enough together to promote proton sharing and thereby influence enzymatic reactions.The study highlights an important distinction: proton sharing may be rare in freely hydrated molecules but could become important when biomolecules are held in the right geometry by enzymes. It also demonstrates that LJ-PES is a powerful tool for studying proton behavior in solutions. Its ultrafast and site-specific sensitivity could in future help researchers investigate proton sharing directly in more complex chemical and biological systems.<blockquote><h4>The original article</h4><h4><a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/jaaucr/article/6/6/3349/5084661/Proton-Sharing-in-Polycarboxylic-Acids-in-Aqueous">Proton Sharing in Polycarboxylic Acids in Aqueous Solution</a></h4>Lukáš Tomaník, Jiří Tůma, Gunnar Öhrwall, Ronny Golnak, Ngoc Lan Le Nguyen, Bruno Credidio, Harmanjot Kaur, Petr Slavíček, Bernd Winter, H. Christian Schewe<div>JACS Au, 2026, 6, 3349–3355</div><a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1021/jacsau.6c00377">https://doi.org/10.1021/jacsau.6c00377</a><h6>licenced under <a target="_blank" rel="noopener noreferrer" href="https://creativecommons.org/licenses/by/4.0/">CC-BY 4.0</a></h6></blockquote><h4>Abstract</h4>We investigate proton sharing in biologically relevant polycarboxylic acids in aqueous solutions using liquid-jet X-ray photoelectron spectroscopy. In contrast to techniques that record time-averaged proton positions, like nuclear magnetic resonance, photoelectron spectroscopy captures instantaneous proton distribution due to its ultrafast probing time scale. The method is, therefore, uniquely sensitive to the occurrence of proton sharing in an aqueous environment, as demonstrated here. We only observe significant proton sharing dynamics in maleic acid, where its monoanionic form shows a single, delocalized peak in the carbon 1s spectrum. Conversely, succinic acid, fumaric acid, malic acid, glutaric acid, and citric acid exhibit distinct peaks corresponding to separate, localized COOH and COO– groups, instead of shared protons. Our results reveal that intramolecular proton sharing in water is rather an exception for most biologically relevant polycarboxylic acids. This highlights the importance of enzyme-driven structural changes of polycarboxylic acids associated with proton sharing during metabolic processes.</div>

Proton sharing in polycarboxylic acids in aqueous solution

Autumn has already turned the leaves into vibrant shades, and with the end of the year approaching, we would like to thank you - before the first snowflakes arrive - for your trust, cooperation, and continued interest in our products and services.As a long-standing distributor of Thermo Scientific Finnpipette products, we know that the accuracy and reliability of laboratory results often begin with seemingly small details. Choosing the right pipette and tip is one of the first steps toward a successful analysis.That is why we have prepared an EXCLUSIVE offer to help you replenish your laboratory supplies at a more attractive price, while also thanking you for your continued cooperation and trust.<blockquote>EXCLUSIVE OFFER valid until the end of 2026<ul><li>10% off tips</li><li>10% off pipettes</li></ul>Enter the code “KAŠTANY” in your order or include it in your order e-mail.*For larger orders, an additional discount may be available.</blockquote><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/analytika_pipety_a_spicky_thermo_20c5943161.jpg" alt="analytika: Thermo Scientific Pipettes and Tips" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_analytika_pipety_a_spicky_thermo_20c5943161.jpg 146w," sizes="100vw" width="1500" height="1605"><h4>LIMITED OFFER WHILE STOCKS LAST</h4><h5>Everything ages. Precision remains.</h5>Finnpipette tips are proof of that.<h4>Tip Offer</h4><h5>FT 200 FLEX Tips</h5><ul><li>Code: L94060320</li><li>Pack size: 1,000 pcs</li><li>LOT: 20165B0</li><li>EXP: 20 June 2025</li><li>Price: CZK 1,761 (30% discount)</li></ul><h5>FT 1000 Tips</h5><ul><li>Code: L9401070</li><li>Pack size: 200 pcs/box</li><li>LOT: 20346A0</li><li>EXP: 20 December 2025</li><li>Price: CZK 464 (30% discount)</li></ul><h5>Labtip Blue Tips</h5><ul><li>Code: L94300250</li><li>Pack size: 60 pcs/rack</li><li>LOT: 21104B2</li><li>EXP: 20 April 2026</li><li>Price: CZK 206 (20% discount)</li></ul><h5>FT Filter Sterile 10 µL Tips</h5><ul><li>Code: L94052100</li><li>Pack size: 10 × 96 pcs/rack</li><li>LOT: 21136B1</li><li>EXP: 20 May 2026</li><li>Price: CZK 3,740 (20% discount)</li></ul><h4>Types of Thermo Fisher Scientific Pipette Tips</h4><h5>FILTERED</h5><ul><li>help prevent aerosol contamination,</li><li>suitable for PCR and critical samples.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/analytika_spicky_Thermo_s_filtrem_4eb500736e.jpg" alt="analytika: Thermo Fisher Scientific Filtered Tip" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_analytika_spicky_Thermo_s_filtrem_4eb500736e.jpg 245w," sizes="100vw" width="450" height="120"><h5>NON-FILTERED</h5><ul><li>economical and high quality,</li><li>suitable for routine samples.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/analytika_spicky_Thermo_bez_filtru_eea16c4ae1.jpg" alt="analytika: Thermo Fisher Scientific Non-Filtered Tips" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_analytika_spicky_Thermo_bez_filtru_eea16c4ae1.jpg 245w," sizes="100vw" width="442" height="147"><h5>EXTENDED-LENGTH</h5><ul><li>allow deeper access while helping reduce contamination risk,</li><li>suitable for tissue culture, media preparation, and tall laboratory vessels.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/analytika_spicky_Thermo_prodlouzene_2005b4125f.jpg" alt="analytika: Thermo Fisher Scientific Extended-Length Tip" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_analytika_spicky_Thermo_prodlouzene_2005b4125f.jpg 245w," sizes="100vw" width="407" height="118"><h5>MICRO</h5><ul><li>improve accuracy for low-volume samples and support efficient sample transfer,</li><li>suitable for critical and valuable samples and low-volume pipetting.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/analytika_spicky_Thermo_micro_9b5879704a.jpg" alt="analytika: Thermo Fisher Scientific Micro Tip" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_analytika_spicky_Thermo_micro_9b5879704a.jpg 245w," sizes="100vw" width="435" height="115"><h5>MACRO</h5><ul><li>improve accuracy when working with larger sample volumes,</li><li>can serve as an alternative to serological pipettes.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/analytika_spicky_Thermo_macro_8fb12684a7.jpg" alt="analytika: Thermo Fisher Scientific Macro Tip" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_analytika_spicky_Thermo_macro_8fb12684a7.jpg 245w," sizes="100vw" width="395" height="121"><h5>WIDE-BORE</h5><ul><li>the wide opening helps prevent cell lysis and improves accuracy when working with viscous solutions,</li><li>suitable for cell handling, macromolecular structures such as DNA, and highly viscous solutions.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/analytika_spicky_Thermo_siroky_otvor_9d6ad5537e.jpg" alt="analytika: Thermo Fisher Scientific Wide-Bore Tip" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_analytika_spicky_Thermo_siroky_otvor_9d6ad5537e.jpg 245w," sizes="100vw" width="397" height="127">

Equip Your Laboratory for Autumn at a Better Price

Article

Product

Science and research

Video

The main mission of the Faculty of Science is to create highly qualified experts in biology, chemistry, geography, geology and in other interdisciplinary fields. Its scientific and research effort aims to solve key problems concerned with the development of human society. Some of the priority long-term subjects are human health, the study of the function and prediction of the development of ecosystems and the biosphere, and the development of environmentally-friendly materials based on the utilization of renewable resources.

Přírodovědecká fakulta Univerzity Karlovy

The Institute of Organic Chemistry and Biochemistry of the Czech Academy of Sciences (IOCB Prague) is a leading scientific institution in the Czech Republic, recognized internationally. Its primary mission is basic research in the fields of chemical biology and medicinal chemistry, organic and material oriented chemistry, chemistry of natural compounds, biochemistry and molecular biology, physical chemistry, theoretical chemistry, and analytical chemistry. 

Institute of Organic Chemistry and Biochemistry of the Czech Academy of Sciences

Analytika is a Czech company that offers and produces certified reference materials (CRM) and (ultra)pure chemicals for quality control and quality assurance in laboratories, including accredited laboratories.

Our portfolio also includes pipettes and tips, digestors, PFA labware and other equipment for analytical laboratory and trace analysis.

ANALYTIKA

Watrex SCI-AQUA ROWAPUR BASIC Water Purification System

Fully automatic system for the preparation of pure water based on reverse osmosis. Reverse osmosis membrane is protected by three-stage pre-filtration consisting of sediment filter and two carbon adsorption filters.

Fully automatic system for the preparation of pure water based on reverse osmosis. Reverse osmosis membrane is protected by three-stage pre-filtration consisting of sediment filter and two carbon adsorption filters.<a target="_blank" rel="noopener noreferrer" href="https://watrex.com/obchod/water-purification/reverse-osmosis-systems/sci-aqua-basic/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">Watrex SCI-AQUA BASIC</a> is driven by water pressure from water distribution network, it does not require electric power. It prepares water free of mechanical impurities, chlorine, 95-99% of all dissolved substances are removed.&nbsp;Depending on input water composition and supply pressure the output water has a specific conductivity in the range of 10-20 µS/cm.Price: <bdi>384&nbsp;€</bdi> ex. VAT<h4>Features</h4><ul><li>Removes 95 – 99% of dissolved substances</li><li>Typical specific conductivity of produced water 10 – 20 µS/cm</li><li>6 to 12 months filters lifetime</li><li>2 – 5 years RO membrane lifetime</li><li>No electricity is required for operation</li><li>Supplied from water distribution network</li></ul><h4>Technical specification</h4><ul><li>Daily production capacity: 50 – 70 liters</li><li>Input water pressure: 0,3 – 0,7 MPa</li><li>Input water temperature: &lt; 35 °C</li><li>Maximum input water TDS: 1200 mg/l</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Water_purification_systems_8810a2c48a.jpg" alt="Watrex: Water purification systems" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Watrex_Water_purification_systems_8810a2c48a.jpg 245w," sizes="100vw" width="2286" height="1130">Basic requirements for laboratory operations include the easy availability of pure laboratory water in the necessary quantity and quality. Distillation, a popular technique for producing purified water in the past, has virtually completely supplanted by less energy-intensive and operationally dependable alternatives today. Reverse osmosis is the foundation of the majority of contemporary systems for producing purified water; in reality, this principle is supplemented with adsorption, ion exchange, filtration, ultrafiltration, and other physical-chemical techniques.

Watrex SCI-AQUA ROWAPUR DEMI 90 Water Purification System

Fully automatic system for the preparation of clean water based on reverse osmosis combined with purification by a mixed ion exchanger.

Fully automatic system for the preparation of clean water based on reverse osmosis combined with purification by a mixed ion exchanger. Reverse osmosis membrane is protected by two-stage pre-filtration consisting of sediment and carbon filter.<a target="_blank" rel="noopener noreferrer" href="https://watrex.com/obchod/water-purification/reverse-osmosis-systems/rowapur-demi-90/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">Watrex ROWAPUR DEMI</a> is driven by water pressure from water distribution network, it does not require electric power.The output water has a specific conductivity less than &lt;1 µS/cm. The system includes a conductivity tester with optical indication of output water quality.Price: <bdi>761 €</bdi> ex. VAT<h4>Features</h4><ul><li>Specific conductivity of produced water &lt;1 µS/cm</li><li>6 to 12 months filters lifetime</li><li>2 – 5 years RO membrane lifetime</li><li>1000 – 2000 liters polishing filter capacity</li><li>No electricity is required for operation</li><li>Supplied from water distribution network</li></ul><h4>Technical specification</h4><ul><li>Specific conductivity of produced water: &lt; 1 µS/cm</li><li>Daily production capacity:&nbsp;up to 90 liters</li><li>Input water pressure:&nbsp;0,3 – 0,7 MPa</li><li>Input water temperature:&nbsp;&lt; 35 °C</li><li>Maximum input water TDS:&nbsp;1200 mg/l</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Water_purification_systems_8810a2c48a.jpg" alt="Watrex: Water purification systems" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Watrex_Water_purification_systems_8810a2c48a.jpg 245w," sizes="100vw" width="2286" height="1130">Basic requirements for laboratory operations include the easy availability of pure laboratory water in the necessary quantity and quality. Distillation, a popular technique for producing purified water in the past, has virtually completely supplanted by less energy-intensive and operationally dependable alternatives today. Reverse osmosis is the foundation of the majority of contemporary systems for producing purified water; in reality, this principle is supplemented with adsorption, ion exchange, filtration, ultrafiltration, and other physical-chemical techniques.

Watrex SCI-AQUA ROWAPUR DEMI 180 Water Purification System

Fully automatic system for the preparation of clean water based on reverse osmosis combined with purification by a mixed ion exchanger. Reverse osmosis membrane is protected by two-stage pre-filtration consisting of sediment and carbon filter.<a target="_blank" rel="noopener noreferrer" href="https://watrex.com/obchod/water-purification/reverse-osmosis-systems/rowapur-demi-180/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">Watrex ROWAPUR DEMI</a> is driven by water pressure from water distribution network, it does not require electric power.The output water has a specific conductivity less than &lt;1 µS/cm. The system includes a conductivity tester with optical indication of output water quality.Price: 833<bdi> €</bdi> ex. VAT<h4>Features</h4><ul><li>Specific conductivity of produced water &lt;1 µS/cm</li><li>6 to 12 months filters lifetime</li><li>2 – 5 years RO membrane lifetime</li><li>1000 – 2000 liters polishing filter capacity</li><li>No electricity is required for operation</li><li>Supplied from water distribution network</li></ul><h4>Technical specification</h4><ul><li>Specific conductivity of produced water: &lt; 1 µS/cm</li><li>Daily production capacity:&nbsp;up to 180 liters</li><li>Input water pressure:&nbsp;0,3 – 0,7 MPa</li><li>Input water temperature:&nbsp;&lt; 35 °C</li><li>Maximum input water TDS:&nbsp;1200 mg/l</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Water_purification_systems_8810a2c48a.jpg" alt="Watrex: Water purification systems" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Watrex_Water_purification_systems_8810a2c48a.jpg 245w," sizes="100vw" width="2286" height="1130">Basic requirements for laboratory operations include the easy availability of pure laboratory water in the necessary quantity and quality. Distillation, a popular technique for producing purified water in the past, has virtually completely supplanted by less energy-intensive and operationally dependable alternatives today. Reverse osmosis is the foundation of the majority of contemporary systems for producing purified water; in reality, this principle is supplemented with adsorption, ion exchange, filtration, ultrafiltration, and other physical-chemical techniques.

Watrex SCI-AQUA ROWAPUR 090 Water Purification System

Fully automatic system for the preparation of pure water based on reverse osmosis.

Fully automatic system for the preparation of pure water based on reverse osmosis. Reverse osmosis membrane is protected by three-stage pre-filtration consisting of sediment filter and two carbon adsorption filters.<a target="_blank" rel="noopener noreferrer" href="https://watrex.com/obchod/water-purification/reverse-osmosis-systems/rowapur-90/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">Watrex ROWAPUR</a> is driven by water pressure from water distribution network, it does not require electric power.It prepares water free of mechanical impurities, chlorine, 95-99% of all dissolved substances are removed. Depending on input water composition and supply pressure the output water has a specific conductivity in the range of 10-20 µS/cm.Price: 500<bdi>&nbsp;€</bdi> ex. VAT<h4>Features</h4><ul><li>Removes 95 – 99% of dissolved substances</li><li>Typical specific conductivity of produced water 10 – 20 µS/cm</li><li>6 to 12 months filters lifetime</li><li>2 – 5 years RO membrane lifetime</li><li>No electricity is required for operation</li><li>Supplied from water distribution network</li></ul><h4>Technical specification</h4><ul><li>Daily production capacity:&nbsp;up to 90 liters</li><li>Input water pressure:&nbsp;0,3 – 0,7 MPa</li><li>Input water temperature:&nbsp;&lt; 35 °C</li><li>Maximum input water TDS: 1200 mg/l</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Water_purification_systems_8810a2c48a.jpg" alt="Watrex: Water purification systems" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Watrex_Water_purification_systems_8810a2c48a.jpg 245w," sizes="100vw" width="2286" height="1130">Basic requirements for laboratory operations include the easy availability of pure laboratory water in the necessary quantity and quality. Distillation, a popular technique for producing purified water in the past, has virtually completely supplanted by less energy-intensive and operationally dependable alternatives today. Reverse osmosis is the foundation of the majority of contemporary systems for producing purified water; in reality, this principle is supplemented with adsorption, ion exchange, filtration, ultrafiltration, and other physical-chemical techniques.

Watrex SCI-AQUA ROWAPUR 180 Water Purification System

Fully automatic system for the preparation of pure water based on reverse osmosis. Reverse osmosis membrane is protected by three-stage pre-filtration consisting of sediment filter and two carbon adsorption filters.<a target="_blank" rel="noopener noreferrer" href="https://watrex.com/obchod/water-purification/reverse-osmosis-systems/rowapur-180-reverse-osmosis-system/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">Watrex ROWAPUR</a> is driven by water pressure from water distribution network, it does not require electric power.It prepares water free of mechanical impurities, chlorine, 95-99% of all dissolved substances are removed. Depending on input water composition and supply pressure the output water has a specific conductivity in the range of 10-20 µS/cm.Price: 541<bdi>&nbsp;€</bdi> ex. VAT<h4>Features</h4><ul><li>Removes 95 – 99% of dissolved substances</li><li>Typical specific conductivity of produced water 10 – 20 µS/cm</li><li>6 to 12 months filters lifetime</li><li>2 – 5 years RO membrane lifetime</li><li>No electricity is required for operation</li><li>Supplied from water distribution network</li></ul><h4>Technical specification</h4><ul><li>Daily production capacity:&nbsp;up to 180 liters</li><li>Input water pressure:&nbsp;0,3 – 0,7 MPa</li><li>Input water temperature:&nbsp;&lt; 35 °C</li><li>Maximum input water TDS: 1200 mg/l</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Water_purification_systems_8810a2c48a.jpg" alt="Watrex: Water purification systems" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Watrex_Water_purification_systems_8810a2c48a.jpg 245w," sizes="100vw" width="2286" height="1130">Basic requirements for laboratory operations include the easy availability of pure laboratory water in the necessary quantity and quality. Distillation, a popular technique for producing purified water in the past, has virtually completely supplanted by less energy-intensive and operationally dependable alternatives today. Reverse osmosis is the foundation of the majority of contemporary systems for producing purified water; in reality, this principle is supplemented with adsorption, ion exchange, filtration, ultrafiltration, and other physical-chemical techniques.

Watrex SCI-AQUA ROWAPUR 270 Water Purification System

Fully automatic system for the preparation of pure water based on reverse osmosis. Reverse osmosis membrane is protected by three-stage pre-filtration consisting of sediment filter and two carbon adsorption filters.<a target="_blank" rel="noopener noreferrer" href="https://watrex.com/obchod/water-purification/reverse-osmosis-systems/rowapur-270-reverse-osmosis-system/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">Watrex ROWAPUR</a> is driven by water pressure from water distribution network, it does not require electric power.It prepares water free of mechanical impurities, chlorine, 95-99% of all dissolved substances are removed. Depending on input water composition and supply pressure the output water has a specific conductivity in the range of 10-20 µS/cm.Price: 592<bdi>&nbsp;€</bdi> ex. VAT<h4>Features</h4><ul><li>Removes 95 – 99% of dissolved substances</li><li>Typical specific conductivity of produced water 10 – 20 µS/cm</li><li>6 to 12 months filters lifetime</li><li>2 – 5 years RO membrane lifetime</li><li>No electricity is required for operation</li><li>Supplied from water distribution network</li></ul><h4>Technical specification</h4><ul><li>Daily production capacity:&nbsp;up to 270 liters</li><li>Input water pressure:&nbsp;0,3 – 0,7 MPa</li><li>Input water temperature:&nbsp;&lt; 35 °C</li><li>Maximum input water TDS: 1200 mg/l</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Water_purification_systems_8810a2c48a.jpg" alt="Watrex: Water purification systems" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Watrex_Water_purification_systems_8810a2c48a.jpg 245w," sizes="100vw" width="2286" height="1130">Basic requirements for laboratory operations include the easy availability of pure laboratory water in the necessary quantity and quality. Distillation, a popular technique for producing purified water in the past, has virtually completely supplanted by less energy-intensive and operationally dependable alternatives today. Reverse osmosis is the foundation of the majority of contemporary systems for producing purified water; in reality, this principle is supplemented with adsorption, ion exchange, filtration, ultrafiltration, and other physical-chemical techniques.

Watrex SCI-AQUA ULTRAPUR Water Purification System

WATREX ULTRAPURE is dedicated to preparaton of ultrapure water for analytical, biochemical and other laboratories.

WATREX ULTRAPURE is dedicated to preparaton of ultrapure water for analytical, biochemical and other laboratories where the water with specific conductivity values below 0.1 µS/cm and a TOC value of less than 50 ppb is required.The device is fed with pressurized pre-treated water, preferably with conductivity values below 15 µS/cm (e.g. water treated by reverse osmosis).<a target="_blank" rel="noopener noreferrer" href="https://watrex.com/obchod/water-purification/ultra-pure-water/ultrapur-laboratory-unit-for-ultra-pure-water-preparation-2/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">Watrex ULTRAPUR</a> is supplied with a digital flow conductometer that allows monitoring the proper functioning of the device and the need to replace exhausted filter cartridges.The water treated by ULTRAPURE system is suitable for HPLC, AA, ICP and other demanding analyses.The maintenance of the device is very simple and consists only in replacing the filter inserts after they are exhausted.Price: 923<bdi>&nbsp;€</bdi> ex. VAT<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Water_purification_systems_8810a2c48a.jpg" alt="Watrex: Water purification systems" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Watrex_Water_purification_systems_8810a2c48a.jpg 245w," sizes="100vw" width="2286" height="1130">Basic requirements for laboratory operations include the easy availability of pure laboratory water in the necessary quantity and quality. Distillation, a popular technique for producing purified water in the past, has virtually completely supplanted by less energy-intensive and operationally dependable alternatives today. Reverse osmosis is the foundation of the majority of contemporary systems for producing purified water; in reality, this principle is supplemented with adsorption, ion exchange, filtration, ultrafiltration, and other physical-chemical techniques.

Thermo Scientific SpeedVac SRF110 Refrigerated Centrifugal Vacuum Concentrator 

Thermo Scientific™ SpeedVac™ SRF110 is a refrigerated centrifugal vacuum concentrator for gentle concentration of heat-sensitive biological samples, proteins, enzymes, buffers, and HPLC fractions.

The Thermo Scientific™ SpeedVac™ SRF110 Refrigerated Centrifugal Vacuum Concentrator is designed for the gentle concentration and evaporation of heat-sensitive biological samples, including proteins, enzymes, peptides, and other biomolecules. Combining centrifugal force, vacuum, and precise temperature control, the system efficiently removes solvents while helping preserve sample integrity and minimize the risk of thermal degradation.The SRF110 is particularly suitable for the evaporation of non-aggressive, aqueous-based solvents, buffers, and HPLC fractions. Programmable temperature control allows the chamber temperature to be maintained before, during, and after a run, providing greater flexibility for temperature-sensitive applications. The operating temperature can be set from –4 °C to 100 °C in 1 °C increments.Its modular design allows the system to be configured according to individual laboratory requirements. Users can select from compatible Thermo Scientific vacuum pumps, vapor traps, tubing, rotors, and other accessories to build a customized vacuum concentration setup. The SRF110 features a self-aligning, quick-release rotor mechanism, and the RF132 hexagonal rotor is supplied with the concentrator. Additional rotor options are available for different sample formats and capacities.<h4>Key features</h4><ul><li>Refrigerated centrifugal vacuum concentrator for heat-sensitive biological samples</li><li>Suitable for aqueous, non-aggressive solvents, buffers, and HPLC fractions</li><li>Temperature range from –4 °C to 100 °C, adjustable in 1 °C increments</li><li>Programmable chamber temperature control before and after sample runs</li><li>3 preset programs with storage for up to 9 programs</li><li>Self-aligning, quick-release rotor mechanism</li><li>RF132 hexagonal rotor included</li><li>Additional rotor options available for different applications</li><li>Modular configuration for flexible integration of pumps, vapor traps, and accessories</li><li>Electrical options: 115 V AC, 60 Hz, 16 A or 230 V AC, 50 Hz, 8 A</li><li>Certifications include UL, CE, UKCA, KC, and RCM</li><li>F-gas compliant for applicable EPA-SNAP and EU requirements</li></ul><h5>Two kit configurations are available:</h5><ol><li>The SRF110P1 modular configuration includes the refrigerated SRF110 concentrator, RF132 rotor, VLP120-115 oil pump, RVT450-115 vapor trap, universal tubing, 4 L glass condensation flask with cap, and CryoCool™ heat-transfer fluid.&nbsp;</li><li>The SRF110P2 semi-integrated configuration combines the SRF110 and RF132 rotor with the UVS450 Universal Vacuum System, universal tubing, condensation flask, cap, and CryoCool™ fluid.</li></ol>

Products from category Laboratory equipment - page 1

Related content

Proton sharing in polycarboxylic acids in aqueous solution

Equip Your Laboratory for Autumn at a Better Price

Researchers from Charles University, Prague, Have Developed a New Photocathode for Efficient Conversion of CO2 into Ethanol