Marketplace products from category GC columns focused on Consumables - page 1

Agilent 160-7625-5 is 5 m of deactivated fused silica tubing with 0.15 mm ID for use as a retention gap, guard column, or transfer line in GC and GC/MS applications.

Agilent 160-2255-5 is 5 m of deactivated fused silica tubing with 0.25 mm ID and 0.36 mm OD for use as a retention gap, guard column, or transfer line in GC and GC/MS.

Agilent 10 m × 0.18 mm deactivated fused silica tubing provides inert, high-quality sample transfer for GC systems, ideal for retention gaps, transfer lines, and reactive analytes.

Agilent 5 m × 0.20 mm deactivated fused silica tubing ensures inert, high-quality transfer for GC applications—ideal for retention gaps, transfer lines, and reactive analytes.

Agilent Intuvo Jumper Chip for split/splitless inlets enables direct inlet-to-column connection, simplifying GC configuration for diagnostics, method development, and specialized analyses.

Supelco 12392-U is a stainless steel packed GC column with 60/80 Carboxen 1000, optimized for Agilent Configuration A systems, offering robust performance up to 225 °C for gas analysis.

Agilent HP-5 GC column, 30 m × 0.32 mm × 0.25 µm, low-polarity phase for general-purpose GC. Standard 7-inch format compatible with Agilent 5890–8890 and most GC systems.

HP-5 GC column (30 m × 0.32 mm × 0.25 µm) with Smart Key for Agilent 8890. Offers low bleed, wide analyte range, and automatic column recognition for easy GC setup.

Agilent 10 m × 0.18 mm deactivated fused silica tubing provides inert, high-quality sample transfer for GC systems, ideal for retention gaps, transfer lines, and reactive analytes.

Agilent 5 m × 0.20 mm deactivated fused silica tubing ensures inert, high-quality transfer for GC applications—ideal for retention gaps, transfer lines, and reactive analytes.