Gas chromatography (GC) is a powerful analytical technique used to separate and analyze compounds in a mixture. Whether you're working in pharmaceuticals, environmental testing, or food safety, understanding the key components of a gas chromatograph is essential for accurate and efficient results.In this article, we will delve into the primary components of gas chromatography, including the injector, column, detector, and carrier gas—and explain how each plays a critical role in the separation and analysis process.By mastering these elements, you can optimize your GC setup for precise and reliable outcomes. Let's explore each component in detail:<h3>Sample Injector</h3>The injector is the starting point in the <a target="_blank" rel="noopener noreferrer" href="https://www.phenomenex.com/techniques/gc">gas chromatography process</a>, where the sample is introduced into the system. In GC, the sample must be vaporized into a gas before it enters the column. The injector serves this purpose by heating the sample to its gaseous state. There are many types of injectors, Split/Splitless, PTV, on column.The most common injector is the Split/Splitless injector that can be used in split mode or in splitless mode:<ul><li>Split Injection: This mode allows a portion of the sample to be sent to the column while the remainder is vented. It is useful for high-concentration samples to prevent system overload.</li><li>Splitless Injection: In this mode, the entire sample is introduced into the column, making it ideal for trace analysis where even minute quantities need detection.</li></ul>Proper choice of injector type and proper control of injection conditions, such as temperature, sample size, injection mode are crucial for achieving reproducible and reliable results.<h3>Carrier Gas</h3>In gas chromatography, the mobile phase is represented by carrier gas, which transports the vaporized sample through the column. The carrier gas is an inert gas, such as helium, nitrogen, or hydrogen. The choice of carrier gas can influence the efficiency of the separation process.<ul><li>Helium is the most used carrier gas due to its inertness and high flow rate.</li><li>Hydrogen offers faster analysis times but requires careful handling due to its flammability.</li><li>Nitrogen provides a cheaper solution compared to Helium, although it's slower than helium or hydrogen.</li></ul>The flow rate and pressure of the carrier gas need to be carefully controlled to ensure that the sample moves smoothly through the system and adequate efficiency is generated.<h3>Column/Stationary Phase</h3>The column is the heart of the gas chromatograph, where the actual separation of compounds occurs. <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/gcms/products?category=7&amp;manufacturerItems=50">GC columns</a> are typically long, thin tubes made from stainless steel or fused silica. They are coated with a stationary phase, which interacts with the components of the sample as they pass through.<ul><li>Packed Columns: These contain small particles of stationary phase material and generally have a larger volume. While they are less efficient than capillary columns, they can be suitable for specific applications.</li><li>Capillary Columns: These thin tubes are coated with a stationary phase, offering higher resolution and faster analysis times due to their smaller diameter.</li></ul>The length, diameter, and type of stationary phase of the column are important factors that affect the efficiency and selectivity of the separation. The choice of stationary phase (polar or non-polar; liquid-coated or solid) affects how different compounds interact with it.As the sample moves through the column, compounds separate based on volatility and their affinity for the stationary phase, resulting in distinct peaks in the chromatogram.<h3>Detector</h3>Once the sample has passed through the column, it reaches the detector, where individual components are identified and measured. There are several types of detectors, each suited to different applications:<ul><li>Flame Ionization Detector (FID): One of the most commonly used detectors in GC. It measures ions produced when organic compounds are burned in a hydrogen-air flame. FID is highly sensitive to a wide range of organic compounds and offers a broad linear dynamic range.</li><li>Thermal Conductivity Detector (TCD): Detects changes in the thermal conductivity of the gas stream as analytes elute from the column. It is a universal, non-destructive detector, but is generally less sensitive than FID.</li><li>Electron capture detector (ECD): A very sensitive and selective detector used to detect chlorinated compounds it is easily contaminated and requires very pure and dry carrier and makeup gases and difficult maintenance.</li><li>Mass Spectrometer (MS): Provides structural information, aiding in both identification and quantification. Requires advanced and trained users and it’s difficult to maintain.</li></ul>The choice of detector depends on the type of analysis being performed and the sensitivity required. Each detector converts physical or chemical changes associated with the analytes into a measurable signal, producing a chromatogram that reflects concentration and retention time.<h3>Data System</h3>Although not a physical part of the chromatograph, the data system plays an integral role in processing and interpreting the signals generated by the detector. Modern gas chromatographs are equipped with software that converts detector signals into chromatograms—visual representations of the separation process. The software allows users to quantify and identify the components of the sample based on retention times and peak areas.<h3>How to Read a Gas Chromatogram?</h3>Interpreting a gas chromatogram involves understanding its essential elements, such as peaks, retention times, and the overall data for qualitative and quantitative analysis.<h4>The Nature of the Sample</h4>Begin by considering the sample's characteristics; different samples, such as environmental pollutants or food components, may exhibit distinct peak patterns. Recognizing the baseline (the flat line representing the signal without analytes) is crucial for identifying peaks accurately. While well-defined peaks indicate successful separation of components, poorly shaped or broad peaks may suggest issues with the separation process. For instance, if a mixture is injected and three peaks are observed, it indicates the presence of three different compounds in the sample. Conversely, when evaluating the purity of a sample, one would anticipate observing a single peak. Ideally, the chromatogram should reflect this expectation, confirming the sample's purity.<h4>The Identity of the Sample</h4>Retention time (Rt) is a critical factor in identifying the compounds present in the sample. Each analyte has a characteristic retention time that can be compared to known standards or literature. To confirm identities, a standard mixture should run alongside the sample; this allows to correlate retention times with specific compounds. If available, utilizing MS in conjunction with gas chromatography (GC-MS) can provide additional structural information, enhancing identification accuracy. With HR-MS or MS-MS detectors, unknown compounds can be identified by matching perfectly the Molecular weight or by matching the fragmentation pattern.<h4>The Amount of Sample</h4>Quantifying analytes involves analyzing peak area or height, which is directly proportional to the concentration of the analyte in the sample. A calibration curve constructed from known concentrations can help relate peak areas to actual concentrations. It is essential to consider the detector’s sensitivity and the limits of detection, as peaks below a certain threshold may not provide reliable quantification.

Basic Principles of Gas Chromatography - Separation and Analysis

ISC 2026 - Day 2

<h4>What if you could compress 179 days of grueling laboratory workflow into just 14 hours?</h4>In this episode of ‪ChromatographyTalk‬, ‪Organomation‬ General Manager David Oliva sits down with analytical chemist Laura Penabad to discuss her groundbreaking new research in biocatalysis and high-throughput screening. Evolving engineered enzymes typically requires checking thousands of variants—a massive bottleneck when traditional Liquid Chromatography-Mass Spectrometry (LC-MS) runs take minutes per sample. Laura reveals how her team built a modular screening platform that shatters this limitation, running samples 128 times faster than standard methods without sacrificing analytical accuracy.Laura breaks down the "orchestra" of technologies making this possible, including coupling nanoliter droplet microfluidics with Cyclic Ion Mobility-Mass Spectrometry (cIM-MS) to separate complex chemical isomers in milliseconds. She also shares the chaotic but triumphant behind-the-scenes stories of her PhD journey—from presenting a "comically bad" early poster at ASMS to recruiting an undergraduate mechanical engineer to build custom automation software from scratch.If you are an early-career researcher, a mass spec enthusiast, or curious about the future of synthetic biology and machine learning in chemistry, this episode is packed with invaluable intuition and advice.<h3>Video Transcription</h3><h4>From Months to Hours: Droplet Ion Mobility–MS for Biocatalysis Screening</h4>High-throughput screening is central to directed enzyme evolution, but conventional analytical workflows can create a difficult compromise: extremely fast screens often provide limited structural information, while techniques such as LC-MS offer much richer chemical insight at the cost of throughput. In a recent interview, analytical chemist Laura described how her work with droplet-based cyclic ion mobility mass spectrometry is helping bridge that gap—providing rapid analysis while retaining the ability to distinguish structurally similar products.Her research grew from an initially modest proof of concept into a screening platform capable of analyzing a 96-well plate in roughly ten minutes. The resulting workflow was approximately 128 times faster than a conventional three-minute LC-MS analysis, opening new possibilities for directed evolution campaigns in which thousands of enzyme variants need to be evaluated.<h4>Directed evolution needs better analytical screening</h4>Biocatalysis takes advantage of enzymes as highly selective catalysts capable of performing reactions under relatively mild conditions. Directed evolution extends those capabilities by deliberately modifying enzyme sequences, expressing large numbers of variants, screening their activity, and using the best-performing mutants as starting points for subsequent rounds of evolution.The process can be repeated multiple times, progressively steering an enzyme toward improved activity, altered substrate specificity, or even chemistry that does not occur naturally.But the effectiveness of directed evolution depends heavily on the screening step. The more variants that can be analyzed—and the more useful chemical information that can be collected for each one—the more effectively researchers can explore the enormous sequence space available to an enzyme.For Laura, this created a clear analytical challenge: develop a screening platform that was substantially faster than conventional chromatographic analysis without sacrificing the structural discrimination needed for chemically similar products.<h4>From an imperfect first experiment to a working platform</h4>The project did not begin with a polished high-throughput workflow.Laura recalled looking back at her 2023 ASMS poster, where the early system was still working with standards rather than true isomeric samples. Droplet introduction was slow—around six seconds per droplet—and the signals were far from the ideal reproducible, square, flat-topped profiles expected from replicate droplets.Nevertheless, simply producing a droplet signal represented an important first milestone.The decisive change came when the project stopped being treated merely as a demonstration that droplet ion mobility–MS could work and instead became a deliberate effort to build a robust screening platform.Laura approached the problem in modules. First came reliable droplet introduction. Then the ion mobility separation method. Quantification became another independent component. Matrix effects were introduced later, gradually making the system resemble the conditions expected with real screening samples.Each layer was tested before another was added.This stepwise strategy became one of the central principles of the project: rather than attempting to optimize the entire system simultaneously, individual components were developed, challenged, and then assembled into an increasingly realistic workflow.<h4>Finding the middle ground between speed and structural information</h4>One of the biggest analytical problems in high-throughput screening is distinguishing products with the same nominal or exact mass.Constitutional isomers may contain the same atoms and therefore generate the same mass-to-charge ratio, while differing only in how functional groups are arranged within the molecular structure. Very rapid optical or mass-based screens may therefore struggle to distinguish them.Traditional LC-MS can solve many of these problems through chromatographic separation, but a several-minute analysis rapidly becomes impractical when thousands of enzyme variants must be screened.Ion mobility offered Laura’s team another option.Rather than separating compounds on a chromatographic timescale, ion mobility can differentiate ions according to their gas-phase behavior on a much shorter timescale. In the workflow described in the interview, this created a useful compromise: not the kilohertz throughput possible with some simple screening technologies, but dramatically faster structural differentiation than conventional LC-MS.The goal was therefore not simply to achieve the fastest possible screen, but to find a middle-throughput analytical regime with enough resolving power to answer chemically meaningful questions.<h4>A 96-well plate in about ten minutes</h4>That strategy eventually produced one of the most striking results of the project.The droplet cyclic ion mobility–MS platform processed a 96-well plate in roughly ten minutes, while maintaining quantitative results comparable with the conventional LC-MS workflow used for comparison. According to the interview, this represented an approximately 128-fold increase in analysis speed relative to a three-minute LC-MS run.Laura described the successful plate experiment less as a surprise than as confirmation that the modular development strategy had worked.Before reaching that point, the workflow had already been challenged through a sequence of increasingly demanding experiments: droplet formation, ion mobility separation, calibration, matrix-containing calibration, and cross-testing analytes at different concentrations. By the time the complete plate was analyzed, each individual part of the analytical system had already been tested under progressively more realistic conditions.<h4>What does that speed mean for directed evolution?</h4>The impact becomes even clearer when the workflow is considered at the scale of an entire directed-evolution campaign.Laura’s manuscript estimated that a five-round campaign involving 5,000 variants would require approximately 179 days using the conventional LC-MS workflow but only about 14 hours using the new platform.Compressing months of analytical work into less than a day has consequences beyond laboratory productivity.It allows researchers to screen more enzyme variants and therefore sample a larger portion of sequence space. But the resulting datasets may also become increasingly valuable for computational approaches.Rather than retaining information only about the best-performing enzyme variant, researchers can preserve data describing variants that performed poorly as well as those that succeeded. When genotype and phenotype information remain linked through the well-plate workflow, these larger datasets can potentially provide richer input for machine-learning models designed to guide subsequent rounds of enzyme evolution.Faster analysis therefore does more than accelerate an existing experiment—it can change the scale and design of the experiment itself.<h4>Balancing ion mobility resolution and signal</h4>Increasing cyclic ion mobility separation time can improve resolution, but it also introduces an important trade-off: additional passes can reduce signal.Laura optimized this balance experimentally by continuously infusing mixtures containing both isomers and progressively adjusting the ion mobility conditions. After tuning parameters such as wave height and velocity, increasing the separation to three passes provided baseline resolution at the high analyte concentrations used during method development.<blockquote>Concentration, however, also mattered.</blockquote>At higher ion populations, space-charge effects could broaden peaks and reduce the baseline separation. This meant that the optimal number of passes could not be selected independently of the concentration range required by the final assay.Her broader advice for optimization is therefore application-driven: decide first what the analytical method actually needs to accomplish.More speed will almost always require sacrificing something—resolution, signal intensity, quantitative precision, or another performance parameter. The key is to identify which compromise the application can tolerate and then optimize the system around that requirement.<h4>Solving droplet carryover with a practical compromise</h4>Droplet-based workflows present their own engineering challenges, including carryover between neighboring samples.In Laura’s system, analytes showed little tendency to partition into the fluorinated oil separating aqueous droplets within the Teflon tubing. The more troublesome carryover occurred closer to electrospray ionization, where a small amount of sample could remain associated with the interface and appear when the next droplet arrived.Rather than adding excessive engineering complexity to an already elaborate platform, the researchers adopted a pragmatic solution: a sacrificial wash droplet between analytical samples.It is an example of a recurring theme throughout the project. The objective was not to construct the theoretically most sophisticated droplet system, but to create a screening workflow that remained sufficiently robust, reproducible, and practical for large numbers of samples.<h4>High-throughput analysis also requires high-throughput data processing</h4>Accelerating the mass spectrometry experiment created another bottleneck: the data.The instrument produced a continuous intensity-versus-time trace rather than a neatly organized well-plate dataset. With small experiments, Laura could manually identify individual droplets and process the results in spreadsheets. That approach quickly became unrealistic as sample numbers increased.The solution emerged through collaboration with an undergraduate mentee, Aiden, who helped develop a dedicated software tool for processing the continuous traces.Laura defined how the software should behave and how the analytical information should be organized, while Aiden developed the computational implementation. The workflow itself was subsequently adjusted to make automated data processing more reliable—for example, by introducing marker columns that allowed the software to recognize the end of each plate row.The resulting tool can accept the acquired traces together with information about plate dimensions and replicates and automatically return parameters including peak identity, duration, and the corresponding well position. A later version also generated an automatically populated heat map.The experience illustrates how improving analytical throughput often requires simultaneous development of instrumentation, experimental design, and informatics. Making the measurement faster is useful only if the resulting data can be processed at a comparable speed.<h4>Mentoring became part of the scientific process</h4>The software project also reflects another theme Laura emphasized throughout the interview: the value of mentoring.Several younger researchers contributed directly to the development of the final platform. Laura described mentees not simply as additional hands in the laboratory but as scientists capable of proposing their own hypotheses and experimental ideas.Working with undergraduate researchers also influenced the way she organized experiments.Because their available laboratory time was limited, each task needed to have a clear purpose. That encouraged a more disciplined approach to experimental planning: instead of performing experiments simply because they could be done, the team had to ask which experiment would most efficiently answer the next important question.In that sense, mentoring became another mechanism for improving the research itself.<h4>The next step: continuous, automated screening</h4>Despite the dramatic increase in analytical speed, the current workflow still includes manual operations such as loading tubing and connecting the sample stream to the mass spectrometer.The next engineering challenge is therefore automation.Laura described ongoing work using the Venturi effect to pull samples directly from wells into the droplet system. Building on previous work in the laboratory with 96-well plates, she has already tested this approach with as many as 2,000 samples.The long-term direction is clear: continuous and robust droplet generation, automated handling of thousands of samples, rapid ion mobility separation, mass spectrometric detection, and automated reconstruction of the resulting data into plate-based outputs.Combining those elements could move the system closer to the type of large-scale screening required for increasingly ambitious biocatalysis campaigns.<h4>Learning mass spectrometry one problem at a time</h4>Laura also reflected on the broader experience of developing the platform during her PhD.Ion mobility and mass spectrometry initially appeared intimidating, particularly because they combine concepts from analytical chemistry, physical chemistry, separations, instrumentation, and electrical engineering. What eventually changed was not simply learning more facts, but developing the ability to move repeatedly between theory and experiment.An unexpected result sends the researcher back to the underlying theory. A better understanding suggests a modified experiment. That experiment creates another observation, gradually building intuition about how the system behaves.Her advice to early-career scientists is therefore to accept that this process takes time.Advanced analytical techniques may initially appear overwhelming, but understanding develops incrementally through repeated interaction between theory, experimentation, failure, and refinement. Equally important, she emphasized the role of the supportive ion mobility–mass spectrometry community in making a technically demanding field more approachable for young researchers.From the first inconsistent droplets to a platform capable of processing thousands of samples, that iterative mindset ultimately shaped the entire project.<blockquote>This text has been automatically transcribed from a video presentation using AI technology. It may contain inaccuracies and is not guaranteed to be 100% correct.</blockquote><blockquote><h4>Concentrating on Chromatography Podcast</h4>Dive into the frontiers of chromatography, mass spectrometry, and sample preparation with host David Oliva. Each episode features candid conversations with leading researchers, industry innovators, and passionate scientists who are shaping the future of analytical chemistry. From decoding PFAS detection challenges to exploring the latest in AI-assisted liquid chromatography, this show uncovers practical workflows, sustainability breakthroughs, and the real-world impact of separation science. Whether you’re a chromatographer, lab professional, or researcher you'll discover inspiring content!You can find Concentrating on Chromatography Podcast in podcast apps:<ul><li><a target="_blank" rel="noopener noreferrer" href="https://open.spotify.com/show/1wZg67rCjoGju4yhqxI3tL">Spotify</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://podcasts.apple.com/tz/podcast/concentrating-on-chromatography/id1788429185">Apple podcast</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://podscan.fm/podcasts/concentrating-on-chromatography">podscan</a></li></ul>and on <a target="_blank" rel="noopener noreferrer" href="https://www.youtube.com/@ChromatographyTalk/videos">YouTube channel</a></blockquote>

Droplet Cyclic Ion Mobility Mass Spec: Compressing Months of Enzyme Screening Into Just 14 Hours

Article

Events

Academy

Video

Scientists

Interview

Phenomenex is a global technology leader committed to developing novel analytical chemistry solutions that solve the separation and purification challenges of researchers in industrial, government and academic laboratories.

Phenomenex

The International Symposium on Chromatography (ISC) represents the oldest conference series focussing on separation science. ISC symposia have been organised since 1956 in each even year. ISC is internationally recognised as one of the premier meeting series for discussion of all modes of chromatography and separation science with a broad coverage of techniques and applications.

International Symposium on Chromatography - (ISC)

Organomation, founded in 1959, designs and manufactures high-quality nitrogen evaporators and extraction systems. Known for innovation and durability, their lab instruments are used globally for efficient sample preparation with strong customer support.

Organomation

Determination of Amino Acids (Watrex)

Watrex Prague offers laboratory analysis of amino acids in food and natural materials.

<h4>WI08115 – Determination of Free Amino Acids</h4><ul><li>Determination of free amino acids in submitted samples by ion chromatography.</li><li>Price: 1,500 CZK excl. VAT</li></ul><h4>WI08116 – Determination of Amino Acids in Hydrolysates</h4><ul><li>Determination of amino acids in submitted samples by ion chromatography.</li><li>Price: 1,300 CZK excl. VAT</li></ul><h4>WI08121 – Determination of Free Amino Acids with High Detection Sensitivity (AQC)</h4><ul><li>Performed by pre-column AQC derivatization with fluorescence detection using RP-HPLC.</li><li>Price: 1,800 CZK excl. VAT</li></ul><blockquote>10% discount when submitting 10 or more samples simultaneously.</blockquote><h3>Analysis Conditions</h3><ul><li>HPLC Column: WATREX 250 × 4 mm Amino Acid-AQC 5 µm with guard column 20 × 4 mm</li><li>Eluent A: 0.1 M acetate buffer pH 5.0 (adjusted with H₃PO₄)</li><li>Eluent B: Acetonitrile–water (60:40)</li><li>Flow rate: 2 mL/min</li><li>Temperature: 37 °C</li><li>Gradient: 0 min 5%B; 11.5 min 16%B; 11.75 min 25%B; 15 min 30%B; 17.5 min 35%B; 21 min 50%B; 22 min 100%B; 29 min 100%B; 30 min 5%B; 37 min 5%B</li><li>Pressure: 20–24 MPa</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_HPLC_separace_aminokyselin_AQC_AA_standard_9e9d9f8acb.jpg" alt="Watrex: HPLC separation of amino acids AQC – AA standard" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Watrex_HPLC_separace_aminokyselin_AQC_AA_standard_9e9d9f8acb.jpg 245w," sizes="100vw" width="756" height="437"><blockquote><h3>Services – Laboratory</h3>The Watrex Analytical Laboratory will be happy to perform any of our standard analyses, custom analyses, or assist you with method development.We specialize primarily in liquid chromatography techniques and are ready to meet a wide range of requirements—from method development and optimization, through validation and verification of external methods, to training and troubleshooting.Our laboratory also manufactures and packs its own chromatographic columns and guard columns for basic HPLC modes (reversed phase, normal phase, ion chromatography, and ion exclusion chromatography).<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Analyticka_laborator_fc8862fba5.jpg" alt="Watrex: Analytical Laboratory" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Watrex_Analyticka_laborator_fc8862fba5.jpg 245w," sizes="100vw" width="1569" height="637"></blockquote>

Determination of sugars and organic acids (Watrex)

Watrex Prague offers the determination of sugars and organic acids in food, beverages, and other samples using ion-exclusive chromatography.

<h4>WI08119 – Determination of Carbohydrates in Natural Materials and Food Products</h4><ul><li>Determination is performed using ion-exclusion chromatography.</li><li>Price: 1,500 CZK excl. VAT</li></ul><h4>WI08118 – Determination of Organic Acids in Natural Materials and Food Products</h4><ul><li>Organic carboxylic acids are determined by ion-exclusion chromatography in natural and food samples.</li><li>Price: 1,300 CZK excl. VAT</li></ul><blockquote>10% discount when submitting 10 or more samples at once.</blockquote><blockquote><h3>Services – Laboratory</h3>The Watrex Analytical Laboratory will be happy to perform any of our standard analyses, custom analyses, or assist you with method development.We specialize primarily in liquid chromatography techniques and are ready to meet a wide range of requirements—from method development and optimization, through validation and verification of external methods, to training and troubleshooting.Our laboratory also manufactures and packs its own chromatographic columns and guard columns for basic HPLC modes (reversed phase, normal phase, ion chromatography, and ion exclusion chromatography).<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Analyticka_laborator_fc8862fba5.jpg" alt="Watrex: Analytical Laboratory" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Watrex_Analyticka_laborator_fc8862fba5.jpg 245w," sizes="100vw" width="1569" height="637"></blockquote>

Analysis of peptides in supplements (Bioanalytic)

Verify peptides in dietary supplements with sensitive LC-MS/MS analysis. Identify declared peptides, detect impurities, and support reliable product quality control.

<h3>LC-MS/MS analysis of peptides in dietary supplements – precise quality control and compliance with the declaration</h3>Looking for reliable analysis of peptides in dietary supplements? We offer specialized LC-MS/MS (liquid chromatography coupled mass spectrometry) testing to accurately identify peptides used in health promoting products and nutritional supplements.<h4>Why perform LC-MS/MS analysis of peptides?</h4>Peptides are increasingly common ingredients in dietary supplements – both for athletes and those concerned with health, regeneration or skin appearance. Due to their specific action, it is extremely important to precisely analyze the composition of the preparations used and confirm the composition of the declared substances. Our research allows to:<ul><li>Verify the compliance of the supplement with the manufacturer’s declaration,</li><li>Detect contaminants or prohibited substances,</li><li>Ensure the safety and effectiveness of the product’s use,</li><li>Meet the requirements of the sanitary inspection and EU regulations.</li></ul><h4>Our offer – analysis of peptides in supplements by LC-MS/MS method</h4>As part of our service, we offer comprehensive peptide testing by LC-MS/MS, including:<ul><li>Consultation and selection of an analytical method tailored to the type of peptides and the client’s needs,</li><li>Qualitative analysis of peptides (upon request) – aimed at the accurate determination of the mass and isotopic distribution of the peptide under study in the sample in order to unambiguously confirm the identification of the peptide. Indication of impurities and determination of the relative percentage concentration of impurities,</li><li>The ability to identify new or non-standard compounds,</li><li>Fast turnaround time (results as low as 5 working days),</li></ul><h4>Who uses our services?</h4>Our research is aimed at:<ul><li>Manufacturers and importers of dietary supplements,</li><li>Supplement packaging companies,</li><li>Quality control laboratories,</li><li>Distributors and nutritional stores,</li><li>Organizations that test supplements for athletes.</li></ul><h4>Why us?</h4>We have modern technological facilities and a team of experienced analysts. We guarantee full confidentiality, flexibility and individual approach to each order. Our LC-MS/MS analyses meet the highest quality standards.<h4>Have your peptide analysis done today!</h4>Contact us for a free quote and tailor the scope of testing to meet your needs. Ensure the quality, safety and reliability of your dietary supplement with professional laboratory analysis. We offer highly specific and sensitive qualitative analysis of peptides by LC-MS/MS technique. At the moment, we analyze the following peptides:<ul><li>GHRP-2</li><li>GHRP-6</li><li>BPC-157</li><li>Melanotan-2</li><li>Semaglutide</li><li>Tirzepatide</li><li>Retatrutide</li><li>Ipamorelin</li><li>PT-141</li><li>TB-500</li><li>Tesamorelin</li><li>Epitalon</li><li>Fragment 176-191</li><li>GKH-Cu</li><li>Ostarine</li><li>Rad 140</li><li>Kisspeptin</li></ul>The list of compounds is not closed and will be systematically expanded according to customer needs.<a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products?category=54&amp;distributorItems=315">Other analytical methods we offer</a>.

Products from category Food analyses focused on Laboratory analysis - page 1

Related content

Droplet Cyclic Ion Mobility Mass Spec: Compressing Months of Enzyme Screening Into Just 14 Hours

ISC 2026 - Day 2

Basic Principles of Gas Chromatography - Separation and Analysis