Automated Rapid Organic-Solvent-Free Metabolomics via Arrow–GC–MS: An Optimized Green Workflow for Human Plasma Profiling

Coupling micro-flow liquid chromatography with Q-Orbitrap high-resolution mass spectrometry for greener, comprehensive pesticide residue analysis in fruits and vegetables

Size distribution and elemental analysis of fine particles from Li-ion battery cell fire

Scientific article

Science and research

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Watrex SCI-AQUA ROWAPUR BASIC Water Purification System

Fully automatic system for the preparation of pure water based on reverse osmosis. Reverse osmosis membrane is protected by three-stage pre-filtration consisting of sediment filter and two carbon adsorption filters.

Fully automatic system for the preparation of pure water based on reverse osmosis. Reverse osmosis membrane is protected by three-stage pre-filtration consisting of sediment filter and two carbon adsorption filters.<a target="_blank" rel="noopener noreferrer" href="https://watrex.com/obchod/water-purification/reverse-osmosis-systems/sci-aqua-basic/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">Watrex SCI-AQUA BASIC</a> is driven by water pressure from water distribution network, it does not require electric power. It prepares water free of mechanical impurities, chlorine, 95-99% of all dissolved substances are removed.&nbsp;Depending on input water composition and supply pressure the output water has a specific conductivity in the range of 10-20 µS/cm.Price: <bdi>384&nbsp;€</bdi> ex. VAT<h4>Features</h4><ul><li>Removes 95 – 99% of dissolved substances</li><li>Typical specific conductivity of produced water 10 – 20 µS/cm</li><li>6 to 12 months filters lifetime</li><li>2 – 5 years RO membrane lifetime</li><li>No electricity is required for operation</li><li>Supplied from water distribution network</li></ul><h4>Technical specification</h4><ul><li>Daily production capacity: 50 – 70 liters</li><li>Input water pressure: 0,3 – 0,7 MPa</li><li>Input water temperature: &lt; 35 °C</li><li>Maximum input water TDS: 1200 mg/l</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Water_purification_systems_8810a2c48a.jpg" alt="Watrex: Water purification systems" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Watrex_Water_purification_systems_8810a2c48a.jpg 245w," sizes="100vw" width="2286" height="1130">Basic requirements for laboratory operations include the easy availability of pure laboratory water in the necessary quantity and quality. Distillation, a popular technique for producing purified water in the past, has virtually completely supplanted by less energy-intensive and operationally dependable alternatives today. Reverse osmosis is the foundation of the majority of contemporary systems for producing purified water; in reality, this principle is supplemented with adsorption, ion exchange, filtration, ultrafiltration, and other physical-chemical techniques.

Watrex SCI-AQUA ROWAPUR DEMI 90 Water Purification System

Fully automatic system for the preparation of clean water based on reverse osmosis combined with purification by a mixed ion exchanger.

Fully automatic system for the preparation of clean water based on reverse osmosis combined with purification by a mixed ion exchanger. Reverse osmosis membrane is protected by two-stage pre-filtration consisting of sediment and carbon filter.<a target="_blank" rel="noopener noreferrer" href="https://watrex.com/obchod/water-purification/reverse-osmosis-systems/rowapur-demi-90/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">Watrex ROWAPUR DEMI</a> is driven by water pressure from water distribution network, it does not require electric power.The output water has a specific conductivity less than &lt;1 µS/cm. The system includes a conductivity tester with optical indication of output water quality.Price: <bdi>761 €</bdi> ex. VAT<h4>Features</h4><ul><li>Specific conductivity of produced water &lt;1 µS/cm</li><li>6 to 12 months filters lifetime</li><li>2 – 5 years RO membrane lifetime</li><li>1000 – 2000 liters polishing filter capacity</li><li>No electricity is required for operation</li><li>Supplied from water distribution network</li></ul><h4>Technical specification</h4><ul><li>Specific conductivity of produced water: &lt; 1 µS/cm</li><li>Daily production capacity:&nbsp;up to 90 liters</li><li>Input water pressure:&nbsp;0,3 – 0,7 MPa</li><li>Input water temperature:&nbsp;&lt; 35 °C</li><li>Maximum input water TDS:&nbsp;1200 mg/l</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Water_purification_systems_8810a2c48a.jpg" alt="Watrex: Water purification systems" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Watrex_Water_purification_systems_8810a2c48a.jpg 245w," sizes="100vw" width="2286" height="1130">Basic requirements for laboratory operations include the easy availability of pure laboratory water in the necessary quantity and quality. Distillation, a popular technique for producing purified water in the past, has virtually completely supplanted by less energy-intensive and operationally dependable alternatives today. Reverse osmosis is the foundation of the majority of contemporary systems for producing purified water; in reality, this principle is supplemented with adsorption, ion exchange, filtration, ultrafiltration, and other physical-chemical techniques.

Watrex SCI-AQUA ROWAPUR DEMI 180 Water Purification System

Fully automatic system for the preparation of clean water based on reverse osmosis combined with purification by a mixed ion exchanger. Reverse osmosis membrane is protected by two-stage pre-filtration consisting of sediment and carbon filter.<a target="_blank" rel="noopener noreferrer" href="https://watrex.com/obchod/water-purification/reverse-osmosis-systems/rowapur-demi-180/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">Watrex ROWAPUR DEMI</a> is driven by water pressure from water distribution network, it does not require electric power.The output water has a specific conductivity less than &lt;1 µS/cm. The system includes a conductivity tester with optical indication of output water quality.Price: 833<bdi> €</bdi> ex. VAT<h4>Features</h4><ul><li>Specific conductivity of produced water &lt;1 µS/cm</li><li>6 to 12 months filters lifetime</li><li>2 – 5 years RO membrane lifetime</li><li>1000 – 2000 liters polishing filter capacity</li><li>No electricity is required for operation</li><li>Supplied from water distribution network</li></ul><h4>Technical specification</h4><ul><li>Specific conductivity of produced water: &lt; 1 µS/cm</li><li>Daily production capacity:&nbsp;up to 180 liters</li><li>Input water pressure:&nbsp;0,3 – 0,7 MPa</li><li>Input water temperature:&nbsp;&lt; 35 °C</li><li>Maximum input water TDS:&nbsp;1200 mg/l</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Water_purification_systems_8810a2c48a.jpg" alt="Watrex: Water purification systems" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Watrex_Water_purification_systems_8810a2c48a.jpg 245w," sizes="100vw" width="2286" height="1130">Basic requirements for laboratory operations include the easy availability of pure laboratory water in the necessary quantity and quality. Distillation, a popular technique for producing purified water in the past, has virtually completely supplanted by less energy-intensive and operationally dependable alternatives today. Reverse osmosis is the foundation of the majority of contemporary systems for producing purified water; in reality, this principle is supplemented with adsorption, ion exchange, filtration, ultrafiltration, and other physical-chemical techniques.

Watrex SCI-AQUA ROWAPUR 090 Water Purification System

Fully automatic system for the preparation of pure water based on reverse osmosis.

Fully automatic system for the preparation of pure water based on reverse osmosis. Reverse osmosis membrane is protected by three-stage pre-filtration consisting of sediment filter and two carbon adsorption filters.<a target="_blank" rel="noopener noreferrer" href="https://watrex.com/obchod/water-purification/reverse-osmosis-systems/rowapur-90/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">Watrex ROWAPUR</a> is driven by water pressure from water distribution network, it does not require electric power.It prepares water free of mechanical impurities, chlorine, 95-99% of all dissolved substances are removed. Depending on input water composition and supply pressure the output water has a specific conductivity in the range of 10-20 µS/cm.Price: 500<bdi>&nbsp;€</bdi> ex. VAT<h4>Features</h4><ul><li>Removes 95 – 99% of dissolved substances</li><li>Typical specific conductivity of produced water 10 – 20 µS/cm</li><li>6 to 12 months filters lifetime</li><li>2 – 5 years RO membrane lifetime</li><li>No electricity is required for operation</li><li>Supplied from water distribution network</li></ul><h4>Technical specification</h4><ul><li>Daily production capacity:&nbsp;up to 90 liters</li><li>Input water pressure:&nbsp;0,3 – 0,7 MPa</li><li>Input water temperature:&nbsp;&lt; 35 °C</li><li>Maximum input water TDS: 1200 mg/l</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Water_purification_systems_8810a2c48a.jpg" alt="Watrex: Water purification systems" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Watrex_Water_purification_systems_8810a2c48a.jpg 245w," sizes="100vw" width="2286" height="1130">Basic requirements for laboratory operations include the easy availability of pure laboratory water in the necessary quantity and quality. Distillation, a popular technique for producing purified water in the past, has virtually completely supplanted by less energy-intensive and operationally dependable alternatives today. Reverse osmosis is the foundation of the majority of contemporary systems for producing purified water; in reality, this principle is supplemented with adsorption, ion exchange, filtration, ultrafiltration, and other physical-chemical techniques.

Watrex SCI-AQUA ROWAPUR 180 Water Purification System

Fully automatic system for the preparation of pure water based on reverse osmosis. Reverse osmosis membrane is protected by three-stage pre-filtration consisting of sediment filter and two carbon adsorption filters.<a target="_blank" rel="noopener noreferrer" href="https://watrex.com/obchod/water-purification/reverse-osmosis-systems/rowapur-180-reverse-osmosis-system/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">Watrex ROWAPUR</a> is driven by water pressure from water distribution network, it does not require electric power.It prepares water free of mechanical impurities, chlorine, 95-99% of all dissolved substances are removed. Depending on input water composition and supply pressure the output water has a specific conductivity in the range of 10-20 µS/cm.Price: 541<bdi>&nbsp;€</bdi> ex. VAT<h4>Features</h4><ul><li>Removes 95 – 99% of dissolved substances</li><li>Typical specific conductivity of produced water 10 – 20 µS/cm</li><li>6 to 12 months filters lifetime</li><li>2 – 5 years RO membrane lifetime</li><li>No electricity is required for operation</li><li>Supplied from water distribution network</li></ul><h4>Technical specification</h4><ul><li>Daily production capacity:&nbsp;up to 180 liters</li><li>Input water pressure:&nbsp;0,3 – 0,7 MPa</li><li>Input water temperature:&nbsp;&lt; 35 °C</li><li>Maximum input water TDS: 1200 mg/l</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Water_purification_systems_8810a2c48a.jpg" alt="Watrex: Water purification systems" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Watrex_Water_purification_systems_8810a2c48a.jpg 245w," sizes="100vw" width="2286" height="1130">Basic requirements for laboratory operations include the easy availability of pure laboratory water in the necessary quantity and quality. Distillation, a popular technique for producing purified water in the past, has virtually completely supplanted by less energy-intensive and operationally dependable alternatives today. Reverse osmosis is the foundation of the majority of contemporary systems for producing purified water; in reality, this principle is supplemented with adsorption, ion exchange, filtration, ultrafiltration, and other physical-chemical techniques.

Watrex SCI-AQUA ROWAPUR 270 Water Purification System

Fully automatic system for the preparation of pure water based on reverse osmosis. Reverse osmosis membrane is protected by three-stage pre-filtration consisting of sediment filter and two carbon adsorption filters.<a target="_blank" rel="noopener noreferrer" href="https://watrex.com/obchod/water-purification/reverse-osmosis-systems/rowapur-270-reverse-osmosis-system/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">Watrex ROWAPUR</a> is driven by water pressure from water distribution network, it does not require electric power.It prepares water free of mechanical impurities, chlorine, 95-99% of all dissolved substances are removed. Depending on input water composition and supply pressure the output water has a specific conductivity in the range of 10-20 µS/cm.Price: 592<bdi>&nbsp;€</bdi> ex. VAT<h4>Features</h4><ul><li>Removes 95 – 99% of dissolved substances</li><li>Typical specific conductivity of produced water 10 – 20 µS/cm</li><li>6 to 12 months filters lifetime</li><li>2 – 5 years RO membrane lifetime</li><li>No electricity is required for operation</li><li>Supplied from water distribution network</li></ul><h4>Technical specification</h4><ul><li>Daily production capacity:&nbsp;up to 270 liters</li><li>Input water pressure:&nbsp;0,3 – 0,7 MPa</li><li>Input water temperature:&nbsp;&lt; 35 °C</li><li>Maximum input water TDS: 1200 mg/l</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Water_purification_systems_8810a2c48a.jpg" alt="Watrex: Water purification systems" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Watrex_Water_purification_systems_8810a2c48a.jpg 245w," sizes="100vw" width="2286" height="1130">Basic requirements for laboratory operations include the easy availability of pure laboratory water in the necessary quantity and quality. Distillation, a popular technique for producing purified water in the past, has virtually completely supplanted by less energy-intensive and operationally dependable alternatives today. Reverse osmosis is the foundation of the majority of contemporary systems for producing purified water; in reality, this principle is supplemented with adsorption, ion exchange, filtration, ultrafiltration, and other physical-chemical techniques.

Watrex SCI-AQUA ULTRAPUR Water Purification System

WATREX ULTRAPURE is dedicated to preparaton of ultrapure water for analytical, biochemical and other laboratories.

WATREX ULTRAPURE is dedicated to preparaton of ultrapure water for analytical, biochemical and other laboratories where the water with specific conductivity values below 0.1 µS/cm and a TOC value of less than 50 ppb is required.The device is fed with pressurized pre-treated water, preferably with conductivity values below 15 µS/cm (e.g. water treated by reverse osmosis).<a target="_blank" rel="noopener noreferrer" href="https://watrex.com/obchod/water-purification/ultra-pure-water/ultrapur-laboratory-unit-for-ultra-pure-water-preparation-2/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty">Watrex ULTRAPUR</a> is supplied with a digital flow conductometer that allows monitoring the proper functioning of the device and the need to replace exhausted filter cartridges.The water treated by ULTRAPURE system is suitable for HPLC, AA, ICP and other demanding analyses.The maintenance of the device is very simple and consists only in replacing the filter inserts after they are exhausted.Price: 923<bdi>&nbsp;€</bdi> ex. VAT<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_Water_purification_systems_8810a2c48a.jpg" alt="Watrex: Water purification systems" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Watrex_Water_purification_systems_8810a2c48a.jpg 245w," sizes="100vw" width="2286" height="1130">Basic requirements for laboratory operations include the easy availability of pure laboratory water in the necessary quantity and quality. Distillation, a popular technique for producing purified water in the past, has virtually completely supplanted by less energy-intensive and operationally dependable alternatives today. Reverse osmosis is the foundation of the majority of contemporary systems for producing purified water; in reality, this principle is supplemented with adsorption, ion exchange, filtration, ultrafiltration, and other physical-chemical techniques.

Organomation S-EVAP-RB Solvent Evaporator

The mechanical thermostat 8 position and digitally controlled 10 position S-EVAP-RB solvent evaporators can evaporate up to 8 (10) samples at once with a capacity of up to 250 ml at each sample position. 

<h3>S-EVAP-RB 8 Position 250ml</h3>The mechanical thermostat 8 position S-EVAP-RB large scale solvent evaporator (Cat# 12060) can evaporate up to 8 samples at once with a capacity of up to 250 ml (Cat# GS2162) at each sample position. &nbsp;Smaller glassware accommodating up to 125 ml (Cat# GS2161) may also be used with the purchase of adapter rings (Cat# XA2286).<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Organomation_S_EVAP_RB_Solvent_Evaporator_8_position_e5b08ac9dd.jpg" alt="Organomation: S-EVAP-RB Solvent Evaporator - 8 position" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Organomation_S_EVAP_RB_Solvent_Evaporator_8_position_e5b08ac9dd.jpg 120w," sizes="100vw" width="430" height="560"><h3>S-EVAP-RB 10 Position 250ml</h3>The digitally controlled 10 position S-EVAP-RB large scale solvent evaporator (Cat# 12090) can evaporate up to 10 samples at once with a capacity of up to 250 ml (Cat# GS2162) at each sample position. &nbsp;Smaller glassware accommodating up to 125 ml (Cat# GS2161) may also be used with the purchase of adapter rings (Cat# XA2286).<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Organomation_S_EVAP_RB_Solvent_Evaporator_10_position_48376ce49a.jpg" alt="Organomation: S-EVAP-RB Solvent Evaporator - 10 position" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Organomation_S_EVAP_RB_Solvent_Evaporator_10_position_48376ce49a.jpg 120w," sizes="100vw" width="430" height="560"><h4>Standard features (S-EVAP-RB 8 Position and S-EVAP-RB 10 Position)</h4><ul><li>Mechanical thermostat with temperature control +/- 2°C / Digital electronic temperature control +/- 2°C (S-EVAP-RB 8 Position / S-EVAP-RB 10 Position)</li><li>Manifold for holding solvent recovery condensers</li><li>Flow meter and rigid supply tube for condenser water supply</li><li>Condenser water supply/drain manifold connects to a bench cold-water tap, or a refrigerated water chiller for improved control of condenser temperature and water conservation</li><li>Parallel water supply/drain manifolds with quick disconnect tube fittings</li><li>Bath temperature range 30°C - 100°C</li><li>Evaporate solvents with boiling points up to 65°C</li></ul><h4>Advantages (S-EVAP-RB 8 Position and S-EVAP-RB 10 Position)</h4><ul><li>Solvent recovery: recover up to 97% of starting solvent volume with individual collection glassware</li><li>Conserves valuable bench space: all samples are arranged in a circle</li><li>Easy sample access: the instrument rotates allowing all samples to be accessed from the front</li><li>Fewer connections: one water supply line in, one drain line out&nbsp;</li></ul><h4>OPTIONS (Add to main Cat# when purchasing)</h4><h5>S-EVAP-RB 8 Position</h5><ul><li>Positive pressure type Z purged bath (Option Code -Z), Cat# 12060-Z</li><li>240V wiring and plug (Option Code -2), Cat# 12060-2</li><li>Nitrogen purge manifold (Option Code -N), Cat# 12060-N</li></ul><h5>S-EVAP-RB 10 Position</h5><ul><li>Positive pressure type Z purged bath (Option Code -Z), Cat# 12090-Z</li><li>240V wiring and plug (Option Code -2), Cat# 12090-2</li><li>Nitrogen purge manifold (Option Code -N), Cat# 12090-N</li></ul><h4>ACCESSORIES (S-EVAP-RB 8 Position and S-EVAP-RB 10 Position)</h4><ul><li>250 ml individual collection glassware set Cat# GS2162</li><li>125 ml individual collection glassware set Cat# GS2161</li><li>Adapter rings for 3.0 in hole &nbsp;Cat# XA2286</li><li>Cover for 3.0 in disk holes Cat# XA2282</li><li>Cover for 2.125 in disk holes Cat# XA3283</li><li>Boiling grids Cat# GA2245</li><li>Chiller</li></ul><h4>Specification</h4><h5>Model Options</h5><ul><li>S-EVAP-RB 8-Position (250 mL)<ul><li>Catalog Number: 12060</li><li>Number of Sample Positions: 8</li><li>Bath Model: 9125</li><li>Power: 900 W</li><li>Temperature Control: Mechanical thermostat</li><li>Bath Size (Inside): 12 × 4.5 in (30.5 × 11.4 cm)</li><li>System Dimensions: 24 × 22 × 30 in (61 × 56 × 76 cm)</li></ul></li><li>S-EVAP-RB 10-Position (250 mL)<ul><li>Catalog Number: 12090</li><li>Number of Sample Positions: 10</li><li>Bath Model: 16165</li><li>Power: 1600 W</li><li>Temperature Control: Digital controller with LED display</li><li>Bath Size (Inside): 16 × 4.5 in (40.6 × 11.4 cm)</li><li>System Dimensions: 26 × 24 × 30 in (66 × 61 × 76 cm)</li></ul></li></ul><h5>Shared Features</h5><ul><li>Application: Round-bottom flasks with shallow bath</li><li>Sample Flask Type: Round-bottom with flat base, 250 mL</li><li>Required Glassware: GS2162</li><li>Condenser Type: Inverted Hopkins with 24/40 sidearm</li><li>Collection Flask Type: 250 mL round with flat bottom</li><li>Heating Medium: Water</li><li>Bath Temperature Range: 30–100 °C</li><li>Temperature Accuracy: ±2 °C</li><li>Bath Outside Dimensions (W × D × H):<ul><li>Model 9125: 18 × 16 × 7 in (46 × 41 × 18 cm)</li><li>Model 16165: 24 × 19 × 6 in (61 × 48 × 15 cm)</li></ul></li></ul>

Polyscience DuraChill Turbine Pump Chillers

Organomation recommend the new DuraChill line from PolyScience to all looking for a recirculating chiller to complement their S-EVAP or ROT-X-TRACT.

In some applications, cold tap water is enough to keep your condensers cool during routine sample preparation procedures. However, depending on the testing performed in your laboratory, a recirculating chiller system may be recommended to allow your solvent evaporator or extractor to operate as efficiently as possible.Organomation is proud to recommend the new DuraChill line from PolyScience to all customers looking for a recirculating chiller to complement their S-EVAP or ROT-X-TRACT.The recirculating chiller we recommend for your specific case depends on the number of condensers being cooled at one time:<ul><li>For systems with up to 12 condensers, we recommend the Chiller Cat# 17760-C2T, priced at $6,982.25.</li><li>For systems with up to 18 condensers, the optimal choice is Chiller Cat# 17760-C3T, priced at $7,421.00.</li><li>For larger systems with up to 24 condensers, we recommend the Chiller Cat# 17760-C5T, available for $7,841.00.</li></ul>As distributors of PolyScience, we carry these units at the same list price as the manufacturer to allow our customers to purchase a complete evaporator or extraction solution in one place.<h4>Standard features</h4><ul><li>Large, full-color touchscreen display with intuitive interface</li><li>Compact, portable design takes up less floor space</li><li>Cooling at ambient temperatures as high as 86 °F (30 °C)</li><li>Powerful turbine pump</li><li>Front fill reservoir</li><li>DynamicFilter™ self-cleaning filter system</li><li>Ultraviolet anti-biological light system</li><li>Liquid level monitoring to prevent pump failure</li><li>User-adjustable temperature, pressure, and flow rate alarms</li></ul><h4>KEY SPECS</h4><ul><li>Working Temperature: -10° to +70 °C</li><li>Temperature Stability: ±0.1 °C</li><li>Cooling Capacity: 600 to 1290 watts @ 10 °C</li><li>Maximum Pressure: Up to 90 psi (6.2 bar)</li><li>Maximum Flow: Up to 3.5 gpm (13.2 lpm)</li></ul>Detailed specifications of all three models are located in the Specifications section below. Specifications are for 120V, 60Hz systems. Units for 240V / 50Hz are available upon request.<h4>Specification</h4><h5>Available Models &amp; Catalog Numbers</h5><ul><li>17760-C2T – Recommended for systems with up to 12 condensers</li><li>17760-C3T – Recommended for systems with up to 18 condensers</li><li>17760-C5T – Recommended for systems with up to 24 condensers</li></ul><h5>Shared Performance Specifications</h5><ul><li>Temperature Range: –10 °C to 70 °C</li><li>Temperature Stability: ±0.1 °C</li><li>Pump Type: Turbine</li><li>Gas Manifold Layout: Single Ring</li><li>Maximum Pressure: 90 psi</li><li>Maximum Flow Rate: 3.50 gallons per minute (gpm)</li><li>Electrical Requirements:<ul><li>C2T: 120 V / 60 Hz / 13.7 A</li><li>C3T: 120 V / 60 Hz / 16.3 A</li><li>C5T: 120 V / 60 Hz / 17.4 A</li></ul></li><li>Shipping Weight (all models): 169 lbs (76.7 kg)</li></ul><h5>Cooling Capacity at 10 °C</h5><ul><li>17760-C2T: 600 W</li><li>17760-C3T: 900 W</li><li>17760-C5T: 1290 W</li></ul>

Products from category Laboratory equipment - page 2

Related content

Size distribution and elemental analysis of fine particles from Li-ion battery cell fire

Coupling micro-flow liquid chromatography with Q-Orbitrap high-resolution mass spectrometry for greener, comprehensive pesticide residue analysis in fruits and vegetables

Automated Rapid Organic-Solvent-Free Metabolomics via Arrow–GC–MS: An Optimized Green Workflow for Human Plasma Profiling