Marketplace products in condition new - page 9

Universal-fit FID jet with 0.018 inch internal diameter designed for Agilent GC Flame Ionization Detectors to maintain stable flame conditions and consistent analytical performance.

Replacement glow plug assembly for Agilent FID igniter modules, ensuring reliable flame ignition and stable operation of GC Flame Ionization Detectors.

Graphite/Vespel ferrule for 1/8 inch GC tubing providing reliable sealing and thermal stability up to 350 °C in Agilent gas chromatography systems.

Splitless GC inlet liner with single taper geometry and glass wool, designed to trap non-volatiles and improve analyte transfer and peak shape in Agilent GC systems.

Replacement TCD detector seal for Agilent GC systems, ensuring gas-tight operation, stable detector performance, and reliable chromatographic analysis.

Stainless steel LC capillary with 0.12 mm ID and pre-swaged SI/M4 fittings, designed for reliable fluid connections and low dead volume in Agilent InfinityLab analytical LC systems.

The Agilent TumblIR sampling module for the Cary 630 FTIR spectrometer enables fast and reproducible analysis of granular and particulate materials. A rotating mechanism ensures representative infrared spectra even for heterogeneous samples.

Agilent FS ion injector (0.6 mm ID, 180 mm) for Agilent mass spectrometers, designed for stable and reproducible ion transfer from the ion source to the analyzer.

Agilent Intuvo Jumper Chip for split/splitless inlets enables direct inlet-to-column connection, simplifying GC configuration for diagnostics, method development, and specialized analyses.

Agilent Captiva Premium syringe filter with regenerated cellulose (RC) membrane, 25 mm diameter and 0.45 µm pore size. Designed for sample filtration before LC/HPLC analysis with aqueous and organic solvents.