News from LabRulezLCMS Library - Week 14, 2026

News from LabRulezLCMS Library - Week 16, 2026

News from LabRulezLCMS Library - Week 27, 2026

<p><strong>Our Library never stops expanding. What are the most recent contributions to LabRulezLCMS Library in the week of 20th July 2026? Check out new documents from the field of liquid phase, especially HPLC and LC/MS techniques!</strong></p><blockquote><p><span style="font-size:20px;">👉 </span><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library"><span style="font-size:20px;"><strong>SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT LCMS AND RELATED TECHNIQUES</strong></span></a></p></blockquote><blockquote><p><strong>👉 Need info about different analytical techniques?</strong> Peek into <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library"><strong>LabRulezGCMS</strong></a> or <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library"><strong>LabRulezICPMS</strong></a> libraries.</p></blockquote><p>This week we bring you posters by <strong>Agilent Technologies / ASMS, Shimadzu / ASMS, Thermo Fisher Scientific / HPLC Symposium </strong>and<strong> Waters Corporation / ASMS </strong>and technical note by<strong> KNAUER!</strong></p><h3><strong>1. Agilent Technologies / ASMS: Comprehensive characterization of oligonucleotides and related impurities using advanced LC/Q-TOF analytical workflows</strong></h3><ul><li>Poster</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/po_oligonucleotide_lc_q_tof_mp_536_asms_2026_en_agilent_b896ffee63.pdf"><strong>Full PDF for download</strong></a></li></ul><p>Therapeutic oligonucleotides are synthetic, short nucleic acid sequences designed to modulate gene expression by targeting RNA or DNA with high sequence specificity. However, their inherent structural heterogeneity makes impurity profiling essential, as during GMP manufacturing, impurities like phosphorothioate to phosphodiester, 5′ and 3′ truncations or extensions, depurination, and abasic species can directly impact both product safety and efficacy. Antisense oligonucleotides (ASO) like Nusinersen (7127.171 g/mol) are indicated for the treatment of spinal muscular atrophy (SMA). Their closely related variants coelute with the main peak, complicating their characterization in conventional one-dimensional LC/MS workflows. To address this challenge, a 2D LC/MS strategy was implemented using the Agilent 1290 Infinity III Bio LC system with multiple heart cutting, coupled to the 6545XT AdvanceBio LC/Q-TOF and MassHunter BioConfirm software. The first-dimension separation uses an ion pairing buffer-based method to achieve higher chromatographic peak resolution, while the second dimension provides MS compatible desalting, enabling enhanced mass spectrometric sensitivity and improved detection of low-level impurities.&nbsp;</p><h4><strong>Instrumentation</strong></h4><p>1290 Infinity III Bio 2D-LC &amp; <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=10&amp;search=6545XT"><strong>6545XT Q-TOF</strong></a> includes:&nbsp;</p><ul><li>1290 Infinity III Bio Flexible Pump (G7131A)&nbsp;</li><li>1290 Infinity III Bio High-Speed Pump (G7132A)&nbsp;</li><li>1290 Infinity III Bio Multisampler (G7137A)&nbsp;</li><li>1290 Infinity III Multicolumn Thermostat (G7116B)&nbsp;</li><li>1290 Infinity III Variable Wavelength Detector (G7114B)&nbsp;</li><li>1290 Infinity III Diode Array Detector (G7117B)&nbsp;</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=10&amp;search=2D-LC"><strong>2D-LC System</strong></a> with MHC set up</li></ul><h4><strong>Conclusions</strong></h4><ul><li>A 2D-LC/MS workflow enabled effective separation and identification of coeluting impurities.&nbsp;</li><li>HiRes sampling with multi-injection improved resolution and throughput while preserving 1D separation for MScompatible desalting.&nbsp;</li><li>6545XT AdvanceBio LC/Q-TOF delivered accurate mass and MS/MS data for low-abundance impurity detection.&nbsp;</li><li>MassHunter BioConfirm software enabled automated sequence confirmation and impurity identification.&nbsp;</li><li>This integrated platform offers a robust solution for oligonucleotide characterization in therapeutic development.</li></ul><h3><strong>2. KNAUER: Smart Monitoring &amp; Optimization Solutions for SMB Processes: In-Line and Off-Line Tools for SMB Systems</strong></h3><ul><li>Technical note</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/VTN_0048_knauer_in_line_and_off_line_tools_for_smb_systems_50a5f1c1cf.pdf"><strong>Full PDF for download</strong></a></li></ul><p>In liquid chromatography, the purification of target compounds is classically carried out using single column batch chromatography. More efficient approaches include semi – continuous systems with two to three columns and continuous multicolumn systems. The most widely used of the latter is the simulated moving bed (SMB) chromatography which enables the continuous separation of binary or pseudo-binary mixtures. SMB purification is used in various areas such as petrochemical, pharmaceutical or food industry for the production of fine chemicals in different quantities and purities ranging from gram to tons per day. SMB systems vary significantly in size from small lab scale systems operating columns with 8 mm inner diameter (ID) to industrial systems operating columns of onemeter ID or larger.</p><p>Ideally, an SMB process is developed in a smaller lab scale system to reduce solvent and sample consumption compared to development at production scale. Once the separation parameters are established, the SMB process allows for accurate up scaling from lab to production scale. During method development but also production, different tools can be used to monitor and control the process which can be distinguished between in-line and off-line measures. The most crucial parameter, in addition to measuring the pressure, is monitoring the flow rates of the pumps, outlets and/or zones accurately with additional flowmeters. Normally, SMB systems are not equipped with detectors, but UV or RI detectors can be integrated to monitor process stability.&nbsp;</p><p>A standard off-line tool is used to analyse samples taken for one switch or cycle at the raffinate and extract outlets. The resulting chromatograms are used to check, if the separation is working. Further, samples can be taken during the process allowing the depiction of concentration profiles in the different zones. These tools will be described in more detail in the following sections.</p><h4><strong>MATERIAL AND METHODS</strong></h4><ul><li><strong>AZURA Lab SMB system</strong>: SMB, biocompatible, 30 ml/min zone1, 4 ml/min feed, 10 – 130 bar&nbsp;</li><li><strong>AZURA Lab SMB system: </strong>SMB, stainless steel, 30 ml/min zone1, 4 ml/min feed, 10 – 130 bar&nbsp;</li><li><strong>AZURA Pilot SMB system, standard: </strong>SMB, stainless steel, 250 ml/min zone1, 40 ml/min feed, 2 – 100 bar&nbsp;</li><li><strong>AZURA Pilot SMB system, high flow:</strong> SMB, stainless steel, 400 ml/min zone1, 100 ml/min feed, 2 – 60 bar</li><li><strong>Refractive index detector:</strong> <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/2429"><strong>AZURA® RID2.1L HighFlow detector</strong></a> 100 ml/min&nbsp;</li><li><strong>UV detector: </strong><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/2428"><strong>AZURA®UVD 2.1S detector</strong></a>, w/o flow cell</li><li><strong>UV detector: </strong>AZURA®UVD2.1S UV detector, fiber optics w/o flow cell</li></ul><h4><strong>CONCLUSION&nbsp;</strong></h4><p>SMB is a continuous separation process that can run for several hours or days without interruption. Therefore, it is important to monitor the process and to be able to adapt to changes during the run. Different tools are available that can be used for process monitoring and method development. These tools can be divided into two main categories: in-line and off-line tools. In-line tools monitor parameters such as pressure and flow rate directly during the run, whereas off-line tools take a sample, which is then analyzed by an HPLC system. The tools described can be added to the KNAUER SMB systems depending on the customer’s needs. The more parameters that are measured, the better the process can be monitored. This is especially helpful during SMB method development.</p><h3><strong>3. Shimadzu / ASMS: Accelerating drug screening in forensic hair analysis by applying high-speed polarity switching in HR LC-MS/MS</strong></h3><ul><li>Poster</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/TP_180_Accelerating_drug_screening_in_forensic_hair_analysis_by_applying_high_speed_polarity_switching_in_HR_LC_MSMS_168f8cc0b2.pdf"><strong>Full PDF for download</strong></a></li></ul><p>In 2023, the Society of Hair Testing (SoHT) published updated consensus guidelines for the forensic analysis of drugs of abuse in hair, defining recommended targets across eight major drug classes: opiates, cocaine, amphetamines, cannabinoids, opioids, methadone, buprenorphine, and ketamine. Legal drivers, accepted use cases, and degree of prescription differ between US and Europe but in both jurisdictions, mass spectrometry is widely applied to support legally defensible conclusions. The challenge for any drug testing in hair samples, whether it is in forensic and safeguarding contexts, workplace testing or a judicial setting is the need to develop methods capable of detecting expanded search panels with the increased prevalence of new psychoactive substances (NPS) and non-medical prescription drug use. The approach applied in this work considered a LC/QTOF analysis using DDAMS/MS with rapid polarity switching with a novel data processing application, Insight Profiler. The software was designed to support a single click approach to automate data processing of complex data sets in non-targeted analysis from feature detection to compound identification.</p><h4><strong>Materials and Methods</strong></h4><h5><strong>Reversed phase LC Separation: </strong><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=1&amp;search=Nexera+X2"><strong>Nexera X2&nbsp;</strong></a></h5><ul><li>Shim-pack Velox Biphenyl (100 x 2.1 mm, 2.7 µm) column; column temp. 40 ºC, flow rate: 0.3 mL/min, 17 min total analysis time. Methanol:water gradient with 2 mM ammonium formate and 0.002% formic acid&nbsp;</li></ul><h5><strong>High resolution QTOF analysis: </strong><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=1&amp;search=LCMS-9050"><strong>LCMS-9050&nbsp;</strong></a></h5><ul><li>MS scan m/z 100-1000, 100 msec scan time. Polarity switching time 800 msec.&nbsp;</li><li>MS/MS DDA: 4 scans in positive ion mode (m/z 40-1000, 33 msec), 2 scans in negative ion mode (m/z 40-1050, 33 msec) CE 5-55V (1.998 sec total cycle time).</li></ul><h5><strong>Data processing</strong></h5><p><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=1&amp;search=Insight+Profiler"><strong>Insight Profiler</strong></a>, feature detection threshold set to low, compound identification search lists included NIST, HighResNPS, Shimadzu Forensic Toxicology database.</p><h4><strong>Conclusions&nbsp;</strong></h4><ul><li>The targeted DDA-MS/MS polarity switching approach successfully identified a significant number of unknown compounds in the samples not routinely targeted by triple quadrupole analysis.&nbsp;</li><li>The method using DDA-MS/MS was easily configured to support an expanded DoA target panel to meet the needs of forensic toxicology screening.&nbsp;</li><li>Non-targeted analysis using Insight Profiler accelerated data analysis by aligning identified compounds from the same hair donor showing direction of change for pharmaceutical and illicit compounds detected.</li></ul><h3><strong>4. Thermo Fisher Scientific / HPLC Symposium: Enhancing semi-volatile analyte detection in HPLC-CAD using temperature coupling mode for optimized evaporation control</strong></h3><ul><li>Poster</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/po_004766_hplc_vanquish_cad_fatty_acid_quantification_po004766_na_en_4a0868c2cb.pdf"><strong>Full PDF for download</strong></a></li></ul><p>Polysorbates are widely used in biopharmaceutical formulations but can degrade or contain FAs impurities that must be accurately measured to ensure product quality and safety. Charged Aerosol Detection is commonly used for FA analysis, though its performance depends strongly on EvapT. Higher EvapT improves S/N ratios but can reduce sensitivity for semi-volatile compounds like FAs, while lower EvapT has the opposite effect. The <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/2176"><strong>Thermo Scientific Vanquish Charged Aerosol Detector P</strong></a> series introduces a Temperature Coupling Mode that links EvapT with the charging detection module (CDM) temperature, overcoming limitations of earlier systems with fixed CDM temperature of 40 ºC. This coupling improves response and measurement reliability for semi-volatile species, enabling better optimization of FA analysis<sup>1</sup>.</p><h4><strong>Conclusions&nbsp;</strong></h4><ul><li>Advanced temperature control in CAD improved method sensitivity up to ~47% for semi-volatile fatty acids.&nbsp;</li><li>The best overall S/N was achieved at 25.0 °C EvapT with Temperature Coupling Mode enabled.&nbsp;</li><li>The optimized CAD approach supports more sensitive FA impurities and degradants quantification in pharmaceutical and biopharmaceutical formulations.</li></ul><h3><strong>5. Waters Corporation / ASMS: High mass and spatial resolution MS imaging of soft fruit sample cross-sections using desorption electrospray ionization (DESI)</strong></h3><ul><li>Poster</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/720009492_282619e388.pdf"><strong>Full PDF for download</strong></a></li></ul><div><div><section><div><div><div><div><div><div><p>This poster demonstrates the use of <strong>desorption electrospray ionization mass spectrometry imaging (DESI MSI)</strong> for visualizing the spatial distribution of metabolites in high-water-content soft fruits, specifically strawberries and raspberries. The authors developed a simple direct-transfer workflow to overcome the challenges associated with imaging delicate fruit tissues and compared three transfer substrates: plain glass microscope slides, nitrocellulose membranes, and Hamamatsu Poropare plates. The goal was to determine which surface best preserves metabolite localization while enabling high-quality mass spectrometry imaging.</p><p>Fresh fruit cross-sections were transferred to each substrate by direct contact for 10 seconds before analysis using a <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=5&amp;search=DESI+XS"><strong>Waters DESI XS ion source</strong></a> coupled to a <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/2433"><strong>Waters Xevo™ MRT P10 high-resolution mass spectrometer</strong> </a>operating in negative electrospray ionization mode. MS imaging was performed with a <strong>50 µm pixel size</strong>, using a <strong>95:5 methanol/water</strong> spray solvent, while sucrose (m/z 341.1089) served as the lock mass for accurate mass calibration. High mass resolution enabled tentative assignment of metabolites such as citric acid, asparagine, malic acid, glutamic acid, palmitic acid, stearic acid, and sucrose.</p><p>The comparison of transfer substrates revealed significant differences in metabolite localization and image quality. Glass slides produced the strongest metabolite signals but also exhibited considerable metabolite delocalization during sample transfer, reducing spatial accuracy. Nitrocellulose membranes transferred a broader range of metabolites and provided complementary chemical information, although they also showed greater analyte spreading and suffered physical damage after a single DESI acquisition. In contrast, <strong>Poropare plates</strong> minimized metabolite delocalization and preserved fine structural details within the fruit cross-sections, despite producing somewhat lower signal intensities than glass slides.</p><p>The study concludes that direct transfer combined with DESI MSI is an effective approach for imaging soft fruit tissues that are otherwise difficult to analyze because of their high water content. Among the evaluated substrates, <strong>Hamamatsu Poropare plates</strong> provided the best balance between spatial resolution and preservation of metabolite localization, making them particularly suitable for high-resolution metabolomic imaging, while high mass accuracy facilitated confident tentative metabolite identification.</p></div></div></div></div></div></div></section></div></div>

News from LabRulezLCMS Library - Week 30, 2026

<p><strong>Our Library never stops expanding. What are the most recent contributions to LabRulezLCMS Library in the week of 17th August 2026? Check out new documents from the field of liquid phase, especially HPLC and LC/MS techniques!</strong></p><blockquote><p><span style="font-size:20px;">👉 </span><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library"><span style="font-size:20px;"><strong>SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT LCMS AND RELATED TECHNIQUES</strong></span></a></p></blockquote><blockquote><p><strong>👉 Need info about different analytical techniques?</strong> Peek into <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library"><strong>LabRulezGCMS</strong></a> or <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library"><strong>LabRulezICPMS</strong></a> libraries.</p></blockquote><p>This week we bring you posters by <strong>Agilent Technologies / ASMS, Thermo Fisher Scientific / ASMS </strong>and<strong> Shimadzu / ASMS </strong>and application note by<strong> Waters Corporation!</strong></p><h3><strong>1. Agilent Technologies / ASMS: Quantitation of N-Nitroso Duloxetine N-Nitrosamine Drug Substance Related Impurities (NDSRI) in API and Formulation by 6475 LC/TQ</strong></h3><ul><li>Poster</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/po_drug_impurities_lc_tq_tp_402_asms_2026_en_agilent_b933b9bddf.pdf"><strong>Full PDF for download</strong></a></li></ul><p>Nitrosamine impurities are nitroso derivatives where the nitroso group is attached to an amine. The active pharmaceutical ingredient (API) derived from a class of nitrosamines are known as N-nitrosamine drugsubstance-related impurities (NDSRI). Nitrosamine impurities in APIs and drug products pose safety concerns, even in small quantities, and thus are a major concern for drug makers [1].&nbsp;</p><p>Analytical methods must be sufficiently sensitive to quantify the nitrosamine of interest at levels as low as 10% of the specification limit and, where feasible, down to ≤5% of the specification limit, for the determination of the limit of detection. LC/MS/MS is an inherently selective and highly sensitive analytical technique that is well suited for the identification and quantification of trace-level impurities at extremely low concentrations. Consequently, LC/MS/MS has been widely adopted within the pharmaceutical industry, particularly for nitrosamine analysis [2-3].&nbsp;</p><p>Therefore, manufacturers must develop and qualify a dedicated analytical method that is appropriate for the specific sample matrix and targeted NDSRIs. An LC/MS/MS method based on multiple reaction monitoring (MRM) was developed for the detection and quantification of the N-nitroso duloxetine NDSRI impurity over a concentration range of 0.5 to 40 ppb (absolute standard concentration), using an atmospheric pressure chemical ionization (APCI) source on an Agilent 6475A LC/TQ instrument.</p><h4><strong>Experimental</strong></h4><ul><li><strong>MS:</strong> <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=10&amp;search=6475"><strong>6475 Triple Quadrupole LC/MS System</strong></a></li><li><strong>Column:</strong> <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=10&amp;search=Poroshell+HPH+C18"><strong>Poroshell HPH C18</strong></a> (4.6*150mm, 2.7µm)</li></ul><h4><strong>Conclusions</strong></h4><ul><li>A highly sensitive and robust MRM LC/MS/MS method was developed for the quantitation of N-nitroso duloxetine in duloxetine hydrochloride API and finished formulation using the Agilent 6475A LC/TQ.&nbsp;</li><li>The optimized chromatographic conditions provided effective separation of the analyte from the API, placebo, and formulation matrices, ensuring reliable quantitation.&nbsp;</li><li>The calibration curve was linear over the concentration range of 0.5-40 ng/mL, with 1/x weighting. R and R2 values were observed for both to be greater than 0.99.&nbsp;</li><li>Recovery studies demonstrated efficient sample extraction, with recoveries ranging from 92-99% in API samples and 109-116% in pellet formulations at the LOQ, specification, and 200% specification levels.&nbsp;</li><li>The method also showed excellent reproducibility across all evaluated concentration levels, confirming its suitability for routine analysis.</li></ul><h3><strong>2. Shimadzu / ASMS: Non-Targeted Analysis of Per- and Polyfluoroalkyl Substances in Environmental Extracts by Microflow LC-QToF Coupled with Multi-spray ESI</strong></h3><ul><li>Poster</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/TP_562_Non_Targeted_Analysis_of_Per_and_Polyfluoroalkyl_Substances_in_Environmental_Extracts_by_Microflow_LC_Q_To_F_Coupled_with_Multi_spray_ESI_c2a7e1d5bf.pdf"><strong>Full PDF for download</strong></a></li></ul><p>Targeted screening methods are well established for monitoring Perand polyfluoroalkyl substances (PFAS) in environmental samples. However, PFAS comprise a large and evolving class of compounds, creating a need to screen existing, emerging, and transformation products across diverse matrices. Non-targeted Analysis (NTA) allows for the confirmation of suspected PFAS in the environment, but the sample characterization is often limited by analytical sensitivity. Microflow (0.5 – 40 µL/min) coupled with a multi-nozzle emitter enhances sensitivity by improving desolvation. When this is coupled to a high mass accuracy and resolution Quadrupole Time-ofFlight Mass Spectrometer (QToF), capable of data-dependent and independent MS/MS, PFAS characterization of unknown analytes is possible. In this study, various environmental extracts were processed and screened using NTA for PFAS compounds.</p><h4><strong>Methods</strong></h4><p>A <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=1&amp;search=Nexera+Mikros"><strong>Shimadzu Nexera Mikros LC</strong> </a>was used to introduce the sample to a Newomics DuoESI source with an M3 emitter on a <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=1&amp;search=9050"><strong>LCMS-9050 QToF MS</strong></a> (Fig. 1). A direct injection on an octadecyl column without delay column was performed. Direct injection was chosen over trapand-elute configuration to minimize selectivity bias caused by the trap column.&nbsp;</p><h4><strong>Conclusion</strong></h4><p>With the increased sensitivity of microflow LC-QToF coupled with multi-spray ESI with DIA acquisition, Insight Explore aided in NTA PFAS analysis. When paired with Insight Discovery and Profiler, a streamlined batch data processing workflow with statistical analysis was shown to effectively handle complex environmental matrices and their analyses.</p><h3><strong>3. Thermo Fisher Scientific / ASMS: Robust and sensitive quantitation of 18 steroids in human serum using Thermo Scientific TSQ Certis Triple Quadrupole mass spectrometer</strong></h3><ul><li>Poster</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/po_004707_lsms_18_steroids_tsq_certis_clinical_po004707_asms2026_na_en_244c52437b.pdf"><strong>Full PDF for download</strong></a></li></ul><p>Accurate quantification of endogenous steroids in human serum is essential for biomonitoring physiological functions such as hormone regulation, reproduction, and immune response in clinical research laboratories. Liquid chromatography–tandem mass spectrometry (LC–MS/MS) is the gold standard for steroid analysis due to its superior sensitivity, selectivity, and multiplexing capability compared to immunoassays. However, steroid measurements remain challenging because of low endogenous concentrations and complex serum matrices. Here, we describe a robust and sensitive LC–MS/MS method for the simultaneous quantification of 18 steroids in human serum using the Thermo Scientific TSQ Certis triple quadrupole mass spectrometer (Figure 1). The method leverages advanced ion source design and fast acquisition to deliver enhanced sensitivity, stability and throughput suitable for high-volume laboratory workflows.</p><h4><strong>Materials and methods</strong></h4><h5><strong>Liquid chromatograph – mass spectrometry&nbsp;</strong></h5><p>Samples were analyzed on a <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/744"><strong>Thermo Scientific Vanquish Horizon UHPLC system</strong></a> coupled to the <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/2207"><strong>TSQ Certis MS</strong></a><strong> </strong>operated in selected reaction monitoring (SRM) mode. The mobile phase composition, analytical column details, LC gradient, and overlaid extracted ion chromatograms (EICs) are shown in Figure 3.&nbsp;</p><h5><strong>Data analysis&nbsp;</strong></h5><p>Data were acquired and processed using <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/77"><strong>Thermo Scientific TraceFinder software</strong></a> (v 5.2).</p><h4><strong>Conclusions&nbsp;</strong></h4><p>A sensitive and robust LC–MS/MS method was developed for simultaneous quantification of 18 steroids in human serum using the Vanquish Horizon UHPLC and TSQ Certis MS with OptaMax Plus ion source. The method demonstrated excellent linearity, accuracy, and reproducibility across a wide dynamic range. Optimization of MS conditions, particularly vaporizer temperature, significantly improved sensitivity. Overall, the workflow delivers high sensitivity, selectivity, and long-term stability, providing a reliable solution for high-throughput steroid analysis in clinical and research settings.</p><h3><strong>4. Waters Corporation: Alkaline-hydrolysis Method for PFAS in Textiles and Textiles Products by Xevo™ TQ-S micro with ACQUITY™ UPLC™ H-Class Plus System</strong></h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/720009443_en_0ab4914d72.pdf"><strong>Full PDF for download</strong></a></li></ul><div><div><section><div><div><div><div><div><div><h5><strong>Benefits&nbsp;</strong></h5><ul><li>Alkaline hydrolysis method (EN 17681-1:2025) used for preparing textiles, coated textiles and textile products for PFAS analysis allowed the inclusion of side-chain fluorinated polymers&nbsp;</li><li>Extraction method provided significant advantages in handling complex textile matrices by creating clear extracts free from dispersions, settleable solids and particulates&nbsp;</li><li>Protected the high-value LC-MS/MS components from potential damage&nbsp;</li><li>The method improved analytical sensitivity, reproducibility and accuracy, enabled cost-effective and timeefficient PFAS analysis maintained high analytical quality even for challenging high-matrix samples</li></ul><p>Many PFAS are linked to health concerns because of their ability to interfere with the body’s hormone systems, acting as endocrine disruptors also, linked to other toxic effects. Since textiles come into direct and prolonged contact with the skin, there is an increased risk of human exposure—especially for babies and children.4 In addition, PFAS pose significant environmental concerns. These “forever chemicals” do not readily break down and can be released during manufacturing, washing and disposal, allowing them to enter water pathways and persist in the environment. As a result, testing for PFAS has become increasingly important in the textile industry to demonstrate supply chain transparency, build consumer trust and protect brand reputation.</p><p>Synthetic fluorinated chemicals are categorized into two main groups - non-polymeric PFAS and polymeric PFAS, known for their use as water and grease repellent, heat resistant finishes in textiles, upholstery, leather, apparel, carpet and other industrial applications such as packaging, firefighting foams, non-stick cookware, etc. (Figure 1). PFAS are fluorinated substances contain at least one fully fluorinated methyl or methylene carbon atom (without any H/Cl/Br/I atom attached to it), i.e. with a few noted exceptions, any chemical with at least a perfluorinated methyl group or a perfluorinated methylene group.2 PFAS are classified as long chain and short chain based on their perfluorinated carbon chain length. Short chain fluorinated polymers encompasses a diverse range of chemistries, categorized according to their generic chemical and repeating units structures. Few examples are: derivatives of fluorotelomers, perfluoropolyethers with varying carbon chain lengths and acrylates, epoxylates, urethane, silicones of repeated units based structures.3 Polyfluoroalkyl substances such as fluorotelomer alcohols (FTOHs) contain C–H bonds, rendering them more susceptible to degradation. The ethoxylates in fluorotelomers-methacrylate break down to FTOH whereas polymeric fluorinated urethanes, acrylates break down to PFCAs (non-polymeric and polymeric side chain fluorinated polymers). In contrast, perfluoroalkyl substances such as PFOS and PFOA are extremely persistent due to their fully fluorinated carbon chains.&nbsp;</p><p>In alkaline hydrolysis methods, methanolic aqueous sodium hydroxide is used to break down precursor PFAS such as FTOHs, branched side chain PFAS. This process releases terminal perfluorinated carboxylic acids (PFCAs), which can then be measured. However, the efficiency of hydrolysis varies among different PFAS compounds and the presence of interfering substances such as organic matter or other chemicals in the sample matrix can inhibit the cleavage and detection of these analytes.</p><h4><strong>Experimental</strong></h4><ul><li><strong>LC system:</strong> <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/198"><strong>ACQUITY UPLC H-Class Plus System</strong></a> and SMFTN fitted with PFAS kit</li><li><strong>Column(s):</strong> <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1823"><strong>XBridge™ BEH™ C18 5 µm Column</strong></a>, 4.6 x 100 mm&nbsp;</li><li><strong>MS system: </strong><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/209"><strong>Xevo TQ-S micro Mass Spectrometer</strong></a></li></ul><h4><strong>Conclusion&nbsp;</strong></h4><p>By strictly following the critical steps of the alkaline hydrolysis method using methanolic aqueous sodium hydroxide (NaOH) both freely extractable PFAS and those previously bound within side-chain fluorinated polymers such as esters linked to fluorotelomer alcohols (n:2 FTOHs, where n = 4, 6, 8, 10, 12), can be effectively extracted. This approach also safeguards the LC-MS/MS instrumentation from blockages, damage, or contamination by preventing polymer accumulation and matrix interferences.&nbsp;</p><p>The analytical method using the ACQUITY UPLC H-Class Plus System and Xevo TQ-S micro LC-MS/MS System was found to be sensitive, reproducible and accurate, enabling cost-effective and time-efficient PFAS analysis in chemically processed textiles, coated textiles and textile products whilst maintaining high analytical quality even for challenging high-matrix samples.</p></div></div></div></div></div></div></section></div></div>

News from LabRulezLCMS Library - Week 34, 2026

Article

Product

Events

Webinars

Application

Academy

Video

Poster

Scientists

Plastics

Environment

Food

Water

Health

Presentation

Scientific article

Interview

Toxicology

Popularization

Science and research

Software

Covid-19

Career

Laboratories

Various

Zaměření

Type of News

Focus

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Restek at ISC 2026

Thermo Fisher Scientific at ISC 2026

Waters at ISC 2026

Managing 4D-STEM data with smarter acquisition

Spatial Proteomics for Translational Research

Streamlining Endotoxin Testing: Automated Sample Preparation and Audit-Ready Workflows for QC Laboratories