<p><strong>Our Library never stops expanding. What are the most recent contributions to LabRulezLCMS Library in the week of 13th October 2025? Check out new documents from the field of liquid phase, especially HPLC and LC/MS techniques!</strong></p><blockquote><p><span style="font-size:20px;">👉 </span><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library"><span style="font-size:20px;"><strong>SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT LCMS AND RELATED TECHNIQUES</strong></span></a></p></blockquote><blockquote><p><strong>👉 Need info about different analytical techniques?</strong> Peek into <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library"><strong>LabRulezGCMS</strong></a> or <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library"><strong>LabRulezICPMS</strong></a> libraries.</p></blockquote><p>This week we bring you application notes by <strong>Agilent Technologies,</strong> <strong>Shimadzu </strong>and<strong> Waters Corporation </strong>and poster by<strong> Thermo Fisher Scientific / HPLC!</strong></p><h3><strong>1. Agilent Technologies: Expanding Coverage for the Analysis of PFAS in Paper-Based Food Packaging Materials</strong></h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_pfas_food_contact_materials_6545_lcqtof_5994_8516en_agilent_0d3cbb1f4d.pdf"><strong>Full PDF for download</strong></a></li></ul><p>PFAS are manufactured chemicals used in food packaging for their grease- and waterproof properties. However, PFAS are persistent in the environment and may pose health risks.2 This study presents a workflow to screen for PFAS in FCMs using LC/Q-TOF. The FluoroMatch software suite was used to automate PFAS data annotation of knowns and unknowns as well as generate an interactive visualization dashboard, enhancing analysis accuracy and coverage.&nbsp;</p><p>The FluoroMatch suite is an open-source set of tools designed to streamline the suspect and nontarget screening of PFAS compounds. It automates several processes, including file conversion, chromatographic peak picking, blank feature filtering, PFAS annotation based on precursor and fragment masses, homologous series detection, compound classification (PFAS versus not PFAS), and reporting annotation confidence. The software library contains 15,643&nbsp;PFAS species and associated fragmentation patterns, with the capability to add more.3&nbsp;</p><p>Various FCM samples, including takeaway containers and microwave popcorn bags, were rigorously extracted and analyzed. Suspect screening was employed for PFAS quantitation, while nontargeted workflows enabled the identification and semi-quantitation of PFAS that were lacking&nbsp;standards.</p><h4><strong>Experimental</strong></h4><h5><strong>LC/MS analysis&nbsp;</strong></h5><p>Extracts were analyzed using an <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=10&amp;search=1290+Infinity+II+LC"><strong>Agilent 1290 Infinity II LC system</strong></a> coupled with an Agilent <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=10&amp;search=6545+LC%2FQ-TOF"><strong>6545 LC/Q-TOF</strong></a>. An Agilent <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=10&amp;search=PFC-Free+HPLC+Conversion+kit"><strong>PFC-Free HPLC Conversion kit</strong></a> (part number 5004‑0006) and an Agilent <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=10&amp;search=InfinityLab+PFC+delay+column"><strong>InfinityLab PFC delay column</strong></a> (part number 5062‑8100) were used to minimize background PFAS levels. Liquid chromatographic separation was performed on a 1.8&nbsp;µm, 2.1 × 100 mm, Agilent ZORBAX RRHD StableBond SB‑C18 column (part number 858700-902) with a corresponding guard column (Agilent part number 821725-902). The mobile phases were (A) water with 20&nbsp;mM ammonium acetate and (B) methanol. The flow rate was 0.4&nbsp;mL/min. The elution gradient was: 5% B (0 to 0.5&nbsp;minutes), linear increase to 40% B (0.5 to 3 minutes), linear increase to 80% B (3 to 16 minutes), hold 80% B (16 to 18 minutes), linear increase to 100% B (18 to 22 minutes), hold 100% B (20 to 22&nbsp;minutes), decrease to 5% B (22 to 22.5 minutes), followed by a 4 minutes post‑run re‑equilibration. The injection volume was 10 μL, and the column temperature was maintained at 50 °C. For the LC/Q‑TOF, the drying gas was set to 4 L/min at 230 °C, the nebulizer to 20 psi, and the sheath gas to 12 L/min at 375 °C.</p><h4><strong>Results and discussion</strong></h4><p>PFAS identification using <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=10&amp;search=FluoroMatch"><strong>FluoroMatch</strong></a> Using FluoroMatch Visualizer, interactive tools for visualizing PFAS data were generated, including mass defect plots, accurate mass versus retention time plots, MS/MS fragmentation plots, annotation tables, and fragment screening. Individual homologous series were selected based on nominal mass and normalized mass defect, allowing for the observation of patterns and identification of outliers. This interactive cross-filtering simplified the evaluation of PFAS features and enhanced confidence in nontargeted results.&nbsp;</p><p>FluoroMatch was used to annotate a homologous series (C3 to C14) of perfluoroalkyl carboxylic acids (PFCAs), including PFHxA (perfluorohexanoic acid), PFHpA (perfluoroheptanoic acid), PFOA (perfluorooctanoic acid), PFNA (perfluorononanoic acid), PFDA (perfluorodecanoic acid), and PFDoDA (perfluorododecanoic acid). This workflow demonstrated that the suspect screening approach successfully identified common PFAS with available standards, while FluoroMatch was able to annotate additional PFAS that were lacking standards.&nbsp;</p><p>Additionally, FluoroMatch annotated C6 and C8 perfluoroalkyl sulfonic acids (PFSAs), which were not identified by suspect screening. This highlights the value of a hybrid workflow that combines traditional suspect screening with nontargeted tools like FluoroMatch, enhancing confidence in the nontargeted results through their complementary nature. Specifically, FluoroMatch allows for homologous series detection to help annotate incomplete or noisy spectra. FluoroMatch Visualizer evaluation helps incorporate additional lines of evidence to annotation like retention time patterns and Kendrick mass defect to aid in annotation.</p><h4><strong>Conclusion&nbsp;</strong></h4><p>This study successfully demonstrates the effectiveness of FluoroMatch software in automating the annotation and visualization of PFAS compounds in food packaging materials. The integration of FluoroMatch Visualizer provides a comprehensive approach to identifying both targeted and nontargeted PFAS compounds. The results highlight the prevalence of PFAS in various paper‑based FCMs, with clamshell to-go boxes showing the highest concentrations, particularly PFOA and PFDA, which exceed European Union regulatory limits. As PFAS can migrate into food, especially at higher temperatures, the pervasiveness of PFAS in FCMs raises concerns about potential exposure through hot meals and microwave heating. The widespread detection of PFAS in clamshell to-go boxes and other FCMs indicates a need for stricter regulations to reduce PFAS use in food packaging to protect consumer&nbsp;health.</p><h3><strong>2. Shimadzu: An Ultra-high Sensitivity Analysis of 29 PFAS Compounds in Drinking Water by Direct Injection</strong></h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_01_01026_en_dcf554dd6f.pdf"><strong>Full PDF for download</strong></a></li></ul><p>PFAS (Per- and Polyfluoroalkyl Substances) are synthetic fluorinated organic compounds. More than a few thousand compounds exist, each with a varied carbon chain length, functional groups, and structural isomers. Because of its useful qualities, such as their ability to repel water and their nonstickiness, PFAS are found in a wide range of consumer and industrial products, including firefighting foams and coatings. Their high stability and persistence raise concerns about their impact on human health and the environment. In recent years, regulations and studies regarding PFAS have been increasing globally. For example, the U.S. Environmental Protection Agency (EPA) has set a Maximum Contaminant Level (MCL) of 4 ng/L for PFOA and PFOS in drinking water. To improve the analysis of PFAS, more sensitive, accurate and faster methods are needed. This application introduces the ultra-high sensitivity analysis of 29 PFAS in drinking water by direct injection using the <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=1&amp;search=LCMS-8065XE"><strong>LCMS-8065XE</strong></a> (Fig. 1) and addresses the demands of testing laboratories for PFAS quantification.</p><h4><strong>Analytical conditions</strong></h4><p>The HPLC and MS analytical conditions are shown in Table 1 and 2. The test compounds used were the 29 compounds included in methods EPA 533 and 537.1 for drinking water analysis. The <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=1&amp;search=LCMS-8065XE"><strong>LCMS8065XE</strong></a> is equipped with a new ESI probe (StreamFocus) and a new collision cell (UFsweeper IV), providing more sensitive and accurate results in PFAS analysis. A delay column was installed between the mixer and autosampler to separate PFAS from the HPLC system and those in the sample. To ease the analysis, same type of column is used as delay and analytical columns.</p><h4><strong>Conclusion&nbsp;</strong></h4><ul><li>29 of PFAS in drinking water were measured with high sensitivity (&lt;1 ng/L) by direct injection method using the LCMS-8065XE.&nbsp;</li><li>Good recovery and reproducibility were obtained in drinking water samples, confirming that this analytical method can deliver accurate quantification for PFASsin drinking water.</li></ul><h3><strong>3. Thermo Fisher Scientific / HPLC: Efficient tandem capillary flow LC-MS with short μPAC columns and a single ionization source</strong></h3><ul><li>Poster</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/po_efficient_tandem_capillary_flow_lc_ms_short_pac_columns_po_en_f38e078c9a.pdf"><strong>Full PDF for download</strong></a></li></ul><p>Nano-flow tandem direct injection (TDI) workflows increase sample throughput and instrument productivity with flow rates below 1 µL/min but need dual-column ESI interfacing to maintain chromatographic performance. At flow rates above 1 µL/min with capillary flow columns, post-column dispersion impacts performance less, allowing low-dispersion switching valves in the fluidic path. We demonstrate the Vanquish Neo UHPLC system TDI workflow for capillary flow LC with a high throughput short pillar array column. This dual-column, single-ESI emitter setup reduces variability, extends emitter life through efficient salt management, and ensures high reproducibility with dedicated gradient pumps and intelligent method design.</p><h4><strong>Materials and methods</strong></h4><h5><strong>Sample Preparation&nbsp;</strong></h5><p>HeLa cell digests were resuspended in 0.1% TFA and 1% ACN to obtain a 200 ng/µL stock solution, sonicated, diluted, and vortexed before use.</p><h5><strong>LC-MS configuration&nbsp;</strong></h5><p>Samples were analyzed using a <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/398"><strong>Vanquish Neo UHPLC</strong></a> instrument that was configured in tandem direct injection mode with an additional pump module and a 10 µL injection loop for maximum throughput. Two µPACM Neo High-Throughput Plus columns were positioned between low-dispersion 6-port switching valves in the column compartment. A 20 µm ID nanoViper line connected the alternating eluents to an ESI emitter with an integrated liquid junction, positioned in a Thermo Scientific EASY-Spray source coupled to a <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/402"><strong>Orbitrap Exploris 240 mass spectrometer</strong></a></p><h4><strong>Conclusions&nbsp;</strong></h4><ul><li>Using optimized µPAC Neo HT Plus columns in combination with the Tandem Vanquish Neo UHPLC system heightened the productivity of bottom-up proteomics measurements to 86 - 92% (gradient-dependent)&nbsp;</li><li>At these throughputs, choice of emitter only has a minor effect on identifications, FWHM and TIC. Decreasing the flow rate to 1 uL/min causes peak broadening and increases ionization efficiency which is reflected in higher TICs. In this study, reducing the flow rate only showed a positive effect on protein IDs for the longest gradient (100 SPD).&nbsp;</li><li>With the optimized methods, identifications up to 4713 protein groups for the 180 SPD and 5692 protein groups for the 100 SPD were achieved. The CVs using the same column were between 5-6% and between two columns at around 7-8% (n=6)&nbsp;</li><li>Column reproducibility was showcased for 12 columns across four different production batches. Overall, the ID rate variation between the columns was 1.4%. The median coefficient of variation of the retention times of spiked-in PRTC peptides across the tested 12 columns was 1.8%</li></ul><h3><strong>4. Waters Corporation: Oligo Mapping of sgRNA Digests: Leveraging Xevo MRT Mass Spectrometer Performance and Streamlining Data Analysis</strong></h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/720009009_en_f35f22bebc.pdf"><strong>Full PDF for download</strong></a></li></ul><h5><strong>Benefits&nbsp;</strong></h5><ul><li>Confident characterization of sgRNA digestion products with sub-ppm mass accuracy of oligonucleotide precursors, outstanding MS resolution (~100,000), and sensitivity at high acquisition speed</li><li>A compliance-ready informatics workflow featuring the waters_connect MAP Sequence App (ver 1.0) streamlines oligonucleotide mapping of sgRNA digests</li><li>RapiZyme MC1, a new ribonuclease - offers unique cleavage specificity and the opportunity to generate overlapping digestion products, enabling complete (100%) sequence coverage for sgRNAs</li></ul><p>Single guide RNAs (sgRNAs) were first described in 20121 when two RNA molecules essential for CRISPR-Cas9- mediated DNA cleavage – the trans-activating CRISPR RNA (tracrRNA), which serves as a scaffold for the Cas9 nuclease, and the CRISPR RNA (crRNA), responsible for DNA target recognition - were fused into a single RNA construct. This fusion created the sgRNA, a critical component of the CRISPR-Cas9 gene editing system.<sup>1–2</sup> The sgRNA molecule directs the Cas9 nuclease to introduce precise double-stranded breaks in DNA, enabling targeted genetic modifications.&nbsp;</p><p>Since its discovery, which was honored with the Nobel Prize in Chemistry, CRISPR technology has transformed gene editing applications. Beyond basic research, it has been adapted for rapid diagnostic tools, such as COVID19 tests developed during the 2020 global pandemic<sup>3</sup> , and holds promise for therapeutic interventions in genetic diseases, cancer, and infectious diseases. As sgRNAs are typically synthesized via solid-phase oligonucleotide synthesis, their analytical characterization requires confirmation of both the intact molecular weight<sup>4</sup> and the sequence verification to ensure functional accuracy.<sup>5</sup>&nbsp;</p><p>Traditional LC-MS workflows for sgRNA digest oligo mapping have been labor-intensive and time-consuming, relying heavily on manual data analysis and interpretation. Recently<sup>6</sup> , a UPLC-MS and informatics workflow designed for automated sgRNA sequence mapping was presented following enzymatic digestion with a panel of ribonucleases, including RNase T1, hRNAse 4 and two RNase T2 enzymes: RapiZyme MC1 and Cusativin. This application note extends the effectiveness of this workflow (Figure 1) when implemented on a Xevo MRT Mass Spectrometer (Figure 1), while focusing specifically on MC1 digestion of the Waters™ sgRNA LC-MS standard, where complete unique digested product coverage was obtained.</p><h4><strong>Experimental</strong></h4><h5><strong>LC Conditions</strong></h5><ul><li><strong>LC-MS system:</strong> <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1148"><strong>Xevo MRT</strong></a> (multi-reflecting time-of-flight) Mass Spectrometer coupled with <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/191"><strong>ACQUITY™ Premier UPLC (Binary) System&nbsp;</strong></a></li><li><strong>Column: </strong>ACQUITY Premier Oligonucleotide BEH™ C18 Column 300 Å, 1.7 µm, 2.1 x 150 mm, (p/n:186010541)</li></ul><h4>Results and Discussion&nbsp;</h4><p>An informatics workflow (Figure 1) featuring the waters_connect MAP Sequence App (version 1.0) was used to facilitate automated data processing of UPLC-MSE datasets acquired following the enzymatic digestion of an sgRNA standard with RapiZyme MC1.6–7 The informatics processing workflow consisted of three steps:&nbsp;</p><ol><li><strong>In-silico digestion:</strong> The mRNA Cleaver MicroApp was used to generate predicted, in-silico digested oligonucleotide digestion products, based on the target RNA sequence.&nbsp;</li><li><strong>Data processing and mass matching:</strong> The waters_connect MAP Sequence App processed the UPLC-MSE data, matching the predicted neutral monoisotopic masses of digested oligonucleotides to the experimentally acquired MS1 data.&nbsp;</li><li><strong>Sequence coverage visualization: </strong>The resulting sequence coverage for the RNA digest was summarized and visualized using the Coverage Viewer MicroApp.</li></ol><h4><strong>Conclusion&nbsp;</strong></h4><ul><li>An informatics workflow, incorporating the waters_connect MAP Sequence App (ver 1.0) was successfully demonstrated for UPLC-MSE digested oligo mapping analysis of sgRNA digests using the Xevo MRT QTOF Mass Spectrometer.&nbsp;</li><li>Confident peak assessments for analysis of sgRNA digests were achieved with the Xevo MRT QTOF Mass Spectrometer, which delivered excellent sensitivity, high resolution MS (100,000), and mass accuracy of less than 1 ppm.</li><li>Complete sgRNA sequence coverage (100%) was achieved by employing RapiZyme MC1, a novel endonuclease introduced by Waters, which provided unique cleavage specificity and predictable missed cleavages to generate longer, unique, overlapping digestion products.</li><li>Oligonucleotide isomeric sequences resulting from enzymatic digestion were effectively differentiated using the waters_connect CONFIRM Sequence App, which matched elevated energy fragment ions patterns to their respective sequences, allowing unambiguous isomer identification.</li></ul>

News from LabRulezLCMS Library - Week 42, 2025

News from LabRulezLCMS Library - Week 44, 2025

<p><strong>Our Library never stops expanding. What are the most recent contributions to LabRulezLCMS Library in the week of 10th November 2025? Check out new documents from the field of liquid phase, especially HPLC and LC/MS techniques!</strong></p><blockquote><p><span style="font-size:20px;">👉 </span><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library"><span style="font-size:20px;"><strong>SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT LCMS AND RELATED TECHNIQUES</strong></span></a></p></blockquote><blockquote><p><strong>👉 Need info about different analytical techniques?</strong> Peek into <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library"><strong>LabRulezGCMS</strong></a> or <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library"><strong>LabRulezICPMS</strong></a> libraries.</p></blockquote><p>This week we bring you application notes by <strong>Agilent Technologies,</strong> <strong>Shimadzu </strong>and<strong> Waters Corporation</strong> and poster by <strong>Thermo Fisher Scientific!</strong></p><h3><strong>1. Agilent Technologies: Feed Injection at Elevated Pressure Using the Agilent 1290 Infinity III Hybrid Multisampler</strong></h3><p><strong>Optimization of a multipesticide method for the highest sensitivity through feed injection</strong></p><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/te_feed_injection_multipesticide_1290_infinityiii_hybrid_5994_8478en_agilent_f070801ff2.pdf"><strong>Full PDF for download</strong></a></li></ul><p>Modern analytical methods for the determination of pesticide residues are based on multipesticide methods capable of determining hundreds of pesticides in a sample in one analytical LC/MS/MS run. For chromatographic separation of these pesticides, modern separation columns are used. Their dimensions are typically 2.1 × 150 mm, filled with 1.9&nbsp;µm particle size material. This requires that the LC can work at high pressures up to 1300 bar. The Agilent 1290 Infinity III Hybrid Multisampler can operate within this pressure range. In addition, the Hybrid Multisampler can work in two different modes, the classic flow through mode and the Agilent Feed Injection mode. Feed Injection mode helps to prevent peak broadening and splitting effects as they can occur with the classic flow through mode for injection of samples in solvents with high elution strength and higher injection volumes.</p><h4><strong>Experimental</strong></h4><h5><strong>Instrumentation</strong></h5><ul><li>Agilent 1290 Infinity III High-Speed Pump (G7120A)&nbsp;</li><li>Agilent 1290 Infinity III Hybrid Multisampler (G7137B)&nbsp;</li><li>Agilent 1290 Infinity III MCT (G7116B)&nbsp;</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=10&amp;search=Ultivo+Triple+Quadrupole+LC%2FMS+"><strong>Agilent Ultivo Triple Quadrupole LC/MS </strong></a>with Agilent Jet Stream source&nbsp;</li></ul><h5><strong>Software&nbsp;</strong></h5><ul><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=10&amp;search=MassHunter+Acquisition+Software"><strong>Agilent MassHunter Acquisition Software</strong></a> (v. 12.2)&nbsp;</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=10&amp;search=MassHunter+Qualitative+Analysis"><strong>Agilent MassHunter Qualitative Analysis Software</strong></a> (v. 12.0)&nbsp;</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=10&amp;search=MassHunter+Quantitative+Analysis"><strong>Agilent MassHunter Quantitative Analysis Software</strong></a> (v.&nbsp;12.1)&nbsp;</li></ul><h5><strong>Column&nbsp;</strong></h5><ul><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=10&amp;search=InfinityLab+Poroshell+120+Phenyl-Hexyl"><strong>Agilent InfinityLab Poroshell 120 Phenyl-Hexyl</strong></a>, 2.1 × 150 mm, 1.9 µm (part number 699675-912)</li></ul><h4><strong>Results and discussion&nbsp;</strong></h4><p>Calibration curves for a multipesticide method were acquired to demonstrate the possible improvement of peak shape and the lower limits of quantification (LOQ) using Agilent Feed Injection mode in comparison to classical flow through injection mode. This method comprised approximately 120&nbsp;pesticide compounds measured by dynamic MRM. The separation was performed on a 150 mm length column. With the chosen solvents and flow rate, a pressure range above 1000&nbsp;bar was necessary. The calibration curves were acquired for concentrations down to 0.02 ppb (20 ppt), and each calibration point was measured three-fold. The concentrations of the calibration solutions were prepared by dilution using the strong-eluting solvent acetonitrile and injected directly by both injection modes with different injection volumes. An example chromatogram showing the elution pattern for the MRM transitions is displayed in Figure 1.</p><h4><strong>Conclusion&nbsp;</strong></h4><p>This technical overview demonstrates the use of the Agilent Feed Injection mode available with the Agilent 1290 Infinity III Hybrid Multisampler in comparison to the classical flow through injection mode for the analysis of pesticides by a multipesticide method. We demonstrated that the use of Agilent Feed Injection mode improves the obtained peak shape for injection of samples dissolved in high elution strength solvent compared to classical flow through mode. With the improved peak shape obtained by Feed Injection mode, signal to noise ratios were improved, resulting in higher sensitivity. Due to retained peak shape, no manual interaction for peak integration was necessary when using feed injection.</p><h3><strong>2. Shimadzu: Automatic Optimization of Sample Solvent Composition for Achieving Sharp Peak Shapes</strong></h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_01_00938_en_c0f4de1265.pdf"><strong>Full PDF for download</strong></a></li></ul><h4><strong>User Benefits</strong></h4><ul><li>The automatic pretreatment function integrated into the autosampler enables efficient optimization of sample solvent composition, which can be automatically adjusted during analysis.</li><li>The desired composition of sample solvent can be easily specified via the LabSolutionsTM MD interface.</li></ul><p>In LC analysis, the composition of the sample solvent is critical for achieving proper peak shape. If the sample solvent is a stronger eluting solvent than the mobile phase, sample band condensation at the column inlet may be insufficient, leading to sample band broadening. For instance, increasing the organic solvent ratio in the sample solvent to dissolve low-polar compounds may deteriorate the peak shapes of early-eluting compounds in reversed-phase chromatography. Therefore, determining the optimal ratio of organic solvent in the sample solvent is essential. However, manually preparing multiple solvent compositions is extremely time-consuming. The automatic pretreatment function of the autosamplers (<a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=1&amp;search=Nexera+X3"><strong>Nexera series</strong></a>), in combination with the method development support <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=1&amp;search=LabSolutions+MD"><strong>software LabSolutions MD</strong></a>, enables consecutive analyses using different sample solvent compositions without manual intervention. This allows evaluation of the effect of sample solvent composition on peak shape while significantly reducing the labor involved in optimization. In this study, we demonstrate the automated determination of the optimal sample solvent composition using metoclopramide, a small-molecule drug, as a model compound.</p><h4><strong>Automatic Pretreatment Function</strong></h4><p>The automatic pretreatment function integrated into the autosampler enables drawing and ejecting specified volumes of reagents and solvents from any vial, as well as mixing them within the needle. As an example, Fig. 1 illustrates the procedure for automatically adjusting the water-to-methanol ratio in the sample solvent using this function. The autosamplers (Nexera series) supports up to three rinsing solvents via the multi-rinse function, and in this procedure, methanol and water were supplied from these rinsing lines. By modifying the "methanol eject volume" (2) and “water eject volume” (3) in Fig. 1, sample solvents with desired methanol-to-water ratios can be automatically prepared. In addition, adjusting the “sample drawing volume” (1) allows for not only changing the sample solvent composition but also diluting the sample solution to a specified concentration.</p><h4><strong>Analytical Conditions and Target Compounds</strong></h4><p>A 1000 mg/L solution of metoclopramide, a small-molecule drug, was prepared in 100% methanol as a model sample. The water content in the sample solvent was then varied from 0% to 90% in 10% increments (A 10-fold dilution was applied during automatic sample solvent preparation), and its effect on peak shape was evaluated under the analytical conditions shown in Table 1. By simply specifying the desired water content on the LabSolutions MD interface (red frame in Fig. 2), the autosampler’s automatic pretreatment function adjusts the sample solvent composition during consecutive analyses. This eliminates the need for manual preparation of multiple solvent mixtures, significantly reducing the workload involved in optimizing sample solvent composition for ideal peak shapes.</p><h4><strong>Conclusion</strong></h4><p>Optimizing the composition of the sample solvent is essential for achieving appropriate peak shapes. However, manual preparation of multiple solvent compositions is time-consuming. The automatic pretreatment function of the autosampler, in combination with LabSolutions MD, enables consecutive analyses with automatic variation of the sample solvent composition. This significantly reduces the effort required for optimization. Since the optimal sample solvent composition depends on both the physicochemical properties of the analyte and the mobile phase conditions, optimization is necessary for each sample. These tasks, however, can be greatly reduced by utilizing the automatic pretreatment function.</p><h3><strong>3. Thermo Fisher Scientific: Improving selectivity and sensitivity of lipid mediator analyses by coupling nano-flow chromatography with the Stellar mass spectrometer</strong></h3><ul><li>Poster</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/po_improving_selectivity_sensitivity_lipid_mediator_analyses_po_en_c38bc37825.pdf"><strong>Full PDF for download</strong></a></li></ul><p>Lipid mediators play crucial roles in regulating inflammation and maintaining tissue homeostasis. However, their quantification in biological samples is difficult due to low concentrations (ppt–ppb range), chemical instability, and structural similarity. Conventional LC-MS/MS methods using high-flow UHPLC and triple quadrupole mass spectrometers require extensive optimization of SRM transitions for each analyte. This study introduces a <strong>nano-flow LC-MS workflow</strong> combining the <strong>Thermo Scientific Vanquish Neo UHPLC system</strong> with the <strong>Thermo Scientific Stellar mass spectrometer</strong>, aiming to improve analytical sensitivity and selectivity while reducing solvent and sample consumption.</p><h4><strong>Experimental</strong></h4><p>Lipid mediator standards (from Cayman Chemical) were analyzed using two chromatographic configurations: a <strong>nano-flow method</strong> (500 nL/min) with the <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/398"><strong>Vanquish Neo UHPLC</strong></a> and a <strong>high-flow method</strong> (300 µL/min) using the <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/744"><strong>Vanquish Horizon UHPLC</strong></a>. Both setups were coupled either to the <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1149"><strong>Stellar MS</strong></a> or the <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/404"><strong>TSQ Altis Plus triple quadrupole MS</strong></a>. The Stellar instrument features a <strong>dual-pressure linear ion trap</strong> and <strong>ion routing multipole</strong>, enabling both <strong>HCD (higher-energy collisional dissociation)</strong> and <strong>CID (collision-induced dissociation)</strong> fragmentation. Parallel reaction monitoring (PRM) was employed instead of SRM, allowing simultaneous detection of multiple transitions. Data were processed using <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/77"><strong>Thermo Scientific TraceFinder</strong></a> software with internal standards and calibration curves ranging from 0.0001 ppb to 100 ppb.</p><h4><strong>Results</strong></h4><p>The nano-flow Stellar method achieved superior sensitivity and selectivity compared with the high-flow methods on both Stellar and TSQ Altis Plus systems. Limits of quantitation (LOQ) reached the <strong>low-ppt range</strong>, while maintaining fast analysis times (&lt; 30 min) and requiring less than 20 µL of solvent per sample. Chromatograms of key eicosanoids such as <strong>15(S)-HETE</strong>, <strong>12(S)-HETE</strong>, and <strong>5(S)-HETE</strong> demonstrated higher signal intensity and improved peak shapes under nano-flow conditions. Calibration curve reproducibility and scan density (&gt; 10 scans per peak) confirmed reliable quantitative performance.</p><h4><strong>Conclusion</strong></h4><p>Coupling <strong>nano-flow chromatography</strong> with the <strong>Stellar mass spectrometer</strong> provides a powerful workflow for targeted lipid mediator analysis, significantly enhancing both selectivity and sensitivity compared with conventional high-flow LC-MS/MS. The system’s <strong>PRM capability</strong>, <strong>dual-fragmentation flexibility</strong>, and <strong>low-volume solvent use</strong> make it a robust and cost-effective solution for biological and clinical lipidomics, capable of quantifying trace-level lipid mediators efficiently and reproducibly.</p><h3><strong>4. Waters Corporation: Investigating Drug Metabolism of Methapyrilene Within a Rat Model Using a Data Dependent Acquisition Workflow with the Xevo MRT Mass Spectrometer</strong></h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/720009001_en_c11ab3b6b7.pdf"><strong>Full PDF for download</strong></a></li></ul><h5><strong>Benefits&nbsp;</strong></h5><ul><li>Demonstration of the Waters™ Xevo™ MRT Mass Spectrometer (MS) workflow for the analysis of urine extracts from a drug dosed study, involving methapyrilene.</li><li>Data dependent acquisition (DDA) has been used for data collection, providing highly informative fragmentation data to confidently identify drug metabolites of interest.</li><li>Combining a DDA approach with high-throughput chromatography is shown to consistently yield high quality spectra, providing highly confident compound identifications.</li><li>A seamless workflow allowing drug metabolites to be confidently identified is demonstrated with the UNIFI™ Application within the waters_connect™ Software Platform</li></ul><p>The introduction of the Xevo MRT Mass Spectrometer allows for comprehensive drug metabolite identification (Met ID) at high acquisition speed. Using urine samples collected over a time course of six days, the excellent mass accuracy, high mass resolution, and sensitivity are highlighted, which can be achieved for drug metabolism studies. DDA provides highly specific MS/MS information, which assists with structural elucidation. The speed at which DDA data can be acquired with the Xevo MRT Mass Spectrometer can be as fast as 50 and 100 Hz, MS, and MS/MS respectively. Combined with fast chromatographic methods, this fast data acquisition rate allows for highly informative, confident data in a high-throughput fashion</p><h4><strong>Experimental</strong></h4><p>LC-MS Data Acquisition LC-MS data were collected using an <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/191"><strong>ACQUITY™ Premier UPLC™ System</strong></a> coupled to a <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1148"><strong>Xevo MRT Mass Spectrometer</strong></a>. The reversed-phase (RP) chromatographic separation consisted of a 5.0 minute method (injection to injection) using a <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1966"><strong>CORTECS™ C18</strong></a>, 1.6 µm, 2.1 x 50 mm analytical Column (p/n: 186007114). The LC solvents were comprised of mobile phase A (0.1% formic acid containing 1 mMol ammonium formate) and mobile phase B (95:5 ACN:Water (v/v), 0.1% formic acid, 1 mMol ammonium formate) being ramped from 50% to 99% over 5 minutes using a flow rate of 0.6 mL/minute. The gradient started from 0.1% to 15% (mobile phase B) over 1.5 minutes, 50% at 3 minutes and 99% at 4 minutes. The solvent composition was held at 99% (mobile phase B) for 0.5 minutes and re-equilibration at initial conditions by 5 minutes, ready for the subsequent injection.&nbsp;</p><p>The Xevo MRT Mass Spectrometer was configured with the source settings as outlined in Table 1. MS data were collected using DDA mode of operation, which consisted of scan rates of 20 Hz (MS) and 50 Hz (MS/MS). The number of components selected for MS/MS were eight with a dynamic exclude applied of 10 mDa with a 10 second retention time tolerance.</p><h4><strong>Data Processing&nbsp;</strong></h4><p>The acquired data were processed using the UNIFI Application within the <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1544"><strong>waters_connect Software Platform</strong></a>. Data were peak picked and screened against a compound database containing MP metabolites and their associated fragments. A mass tolerance of 1 ppm for both MS and MS/MS were applied.</p><h4><strong>Conclusion&nbsp;</strong></h4><p>LC-MS analysis of urine collected over a time course following administration of the drug methapyrilene, has been demonstrated using a DDA approach with the Xevo MRT Mass Spectrometer. MP undergoes complex biotransformation to provide a variety of metabolites. Utilizing a DDA workflow provides detailed, clean fragment ion spectra for confident structural elucidation. The additional benefit of sub ppm mass accuracy provides definitive identification(s). Integrating fast chromatography allows for high-throughput analyses while maintaining high resolution and mass accuracy.</p>

News from LabRulezLCMS Library - Week 46, 2025

News from LabRulezLCMS Library - Week 53, 2025

News from LabRulezLCMS Library - Week 02, 2026

News from LabRulezLCMS Library - Week 07, 2026

News from LabRulezLCMS Library - Week 13, 2026

News from LabRulezLCMS Library - Week 14, 2026

A Novel Compact Multi-Reflecting Time-of-Flight Mass Spectrometer

<p><strong>Our Library never stops expanding. What are the most recent contributions to LabRulezLCMS Library in the week of 3rd August 2026? Check out new documents from the field of liquid phase, especially HPLC and LC/MS techniques!</strong></p><blockquote><p><span style="font-size:20px;">👉 </span><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library"><span style="font-size:20px;"><strong>SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT LCMS AND RELATED TECHNIQUES</strong></span></a></p></blockquote><blockquote><p><strong>👉 Need info about different analytical techniques?</strong> Peek into <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library"><strong>LabRulezGCMS</strong></a> or <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library"><strong>LabRulezICPMS</strong></a> libraries.</p></blockquote><p>This week we bring you posters by <strong>Agilent Technologies / ASMS, Shimadzu / ASMS, Thermo Fisher Scientific / HPLC Symposium </strong>and<strong> Waters Corporation / ASMS </strong>and application note by<strong> Metrohm!</strong></p><h3><strong>1. Agilent Technologies / ASMS: Ultra-Trace Quantification of N-Nitroso-desmethyl-sumatriptan with Interference Resolution Using LC–TQ</strong></h3><ul><li>Poster</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/1290_infinity_iii_uhplc_6495d_lc_tq_desmethyl_sumatriptan_asms_2026_mp_667_agilent_ebb0888227.pdf"><strong>Full PDF for download</strong></a></li></ul><p>Sumatriptan succinate, an antimigraine drug contains nitrosylating functional groups and is susceptible to forming its own nitrosamine drug substance-related impurity (NDSRI), specifically N-nitroso-desmethylsumatriptan. As a Category 1 genotoxic impurity, its specification limit is established at 0.0428 ppm with respect to the API. In this study, samples and standards were prepared in methanol:water (1:1, v/v). The LC/TQ method was developed with a target limit of detection (LOD) at least 20-fold lower than the specification limit to ensure adequate sensitivity. Analytical data were collected in replicate for a 10 mg/mL API sample, as well as LOQ- and specification-level spiked samples, to evaluate recovery, relative standard deviation (RSD), linearity, and repeatability.</p><h4><strong>Experimental</strong></h4><ul><li><strong>LC System: </strong><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=10&amp;search=1290+Infinity+III+UHPLC"><strong>1290 Infinity III UHPLC</strong></a></li><li><strong>MS:</strong> <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=10&amp;search=6495D"><strong>6495D LC/TQ</strong></a></li><li><strong>Column:</strong> <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=10&amp;search=Poroshell+120+EC+C18"><strong>Poroshell 120 EC C18</strong></a>, 3x150mmx2.7µm, 40 Deg C</li></ul><h4><strong>Conclusions&nbsp;</strong></h4><ul><li>A sensitive and robust method has been developed for N-nitroso-desmethyl Sumatriptan in Sumatriptan.&nbsp;</li><li>Method LOQ is 10% lower than specification level, RSD of &lt;5%, and linearity across 0.00214 to 0.1 ppm.&nbsp;</li><li>The recovery of NDSRI in Sumatriptan at LOQ level and specification level are 95%.</li></ul><h3><strong>2. Metrohm: Moisture analysis of rebaudioside M by Karl Fischer titration</strong></h3><p><strong>Simplified rebaudioside M moisture determination via volumetric Karl Fischer titration paired with an oven system</strong></p><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_k_075_download_59f185c238.pdf"><strong>Full PDF for download</strong></a></li></ul><p>Natural sweeteners like stevia and its derivatives are an increasingly important part of the global sweetener market as more consumers substitute sugar with healthier alternatives. Stevia’s derivatives are significantly sweeter than table sugar. These compounds are estimated to be 50 to 300 times sweeter in comparison. This sweet taste coupled with the fact that the human body cannot metabolize steviol glycosides (i.e., they contribute zero calories to one’s diet), makes them a very attractive sugar replacement.&nbsp;</p><p>The moisture content of stevia materials is a crucial factor when discussing their shelf life and stability. Measuring the moisture content of a stevia derivative, rebaudioside M, using an oven system coupled with volumetric Karl Fischer (KF) titration provided a repeatable approach for quantifying the moisture content of this material.</p><h4><strong>Experimental</strong></h4><p>The analysis was carried out with a Double Pt ring electrode for volumetry (6.00346.100). Testing was executed on the <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=220&amp;search=874+Oven+Sample+Processor"><strong>874 Oven Sample Processor</strong></a> (2.874.0120) coupled with an <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=220&amp;search=852+Titrando"><strong>852 Titrando</strong></a> (2.852.0060). Approximately 0.2 g of sample was weighed into an 874 Oven Sample Processor 6 mL vial and placed onto the rack. The oven was set to a temperature of 100 °C, and the evaporated moisture was carried to the volumetric titration vessel by nitrogen gas flow at 70 mL/min. The moisture from the sample was titrated with Hydranal Comp 5 reagent.</p><h4><strong>Conclusion</strong></h4><p>Natural low-calorie sweeteners like stevia derivatives are growing in popularity as people choose healthier alternatives to sugar. Working to develop standardized, specific methodology can help support sweetener industry development, effective quality assessment, and the evaluation of rebaudioside M and other steviol glycosides’ stability.&nbsp;</p><p>This Application Note provides a foundation for the analysis of stevia powder by Karl Fischer titration. An oven system paired with volumetric Karl Fischer analysis provides an accurate, repeatable method to evaluate stevia powder and its derivatives. This method’s compatibility with the 874 Oven Sample Processor allows increased sample throughput through automation, providing operators even more time to complete other important tasks in parallel.</p><h3><strong>3. Shimadzu / ASMS: Quantitative analysis of 6 beta blockers on an LCMS-8045RX</strong></h3><ul><li>Poster</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/WP_131_Quantitative_analysis_of_6_beta_blockers_on_an_LCMS_8045_RX_f596f609f4.pdf"><strong>Full PDF for download</strong></a></li></ul><p>Beta-adrenergic blocking agents, commonly known as beta blockers, competitively inhibit the binding of catecholamines such as epinephrine and norepinephrine to β-adrenergic receptors, thereby reducing heart rate and blood pressure. These drugs are widely prescribed for the treatment of hypertension, angina and heart failure<sup>1</sup> . However, beta blockers may also be misused by athletes resulting in their inclusion on the World Anti-Doping Agency (WADA) prohibited list<sup>2</sup> . Owing to both their therapeutic importance and potential misuse, sensitive and selective analytical methods are required for reliable detection and quantification. Liquid chromatography tandem mass spectrometry (LC-MS/MS) offers high sensitivity and specificity for such analyses.</p><h4><strong>Method</strong></h4><p>Nadolol, metoprolol, propranolol, atenolol &amp; carvedilol were purchased from Sigma Aldrich and Thermo Fisher Scientific. Standards were prepared in 1 mg/mL in LCMS grade methanol. <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=1&amp;search=Nexera+40"><strong>Nexera 40-series HPLC system</strong></a> connected to a <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=1&amp;search=LCMS-8045RX"><strong>LCMS-8045RX</strong></a> was used for data acquisition. The mixture of standards was further diluted in LCMS grade methanol (Sigma Aldrich) and Sigmatrix urine diluent to create the standards for the calibration curves. A Shim-pack Velox Biphenyl column was used for the chromatographic separation. All analytes were ionized with electrospray ionization (ESI) in positive ion mode.</p><h4><strong>Conclusion&nbsp;</strong></h4><ul><li>Superior sensitivity in complex matrices: Limit of Detection (at accuracy ±20% and S/N &gt; 3) of 0.010 ng/mL for all the analytes evaluated in this study.</li><li>Excellent linearity and accuracy: Linear responses (with R2 &gt; 0.99) observed across the evaluated concentration range, and consistent accuracy within ±20% for all 17 calibrants included in this study.&nbsp;</li><li>Optimized throughput: Automated interface and MRM optimization via LabSolutions Connect MRM ensured maximum signal-to-noise determination for this study, while the high-organic flush at the end of each run, maintained column integrity</li></ul><h3><strong>4. Thermo Fisher Scientific / HPLC Symposium: A switchable 2D-LC platform in PAT: routine UV monitoring or MS-based characterization of mAb PQAs directly from the bioreactor</strong></h3><ul><li>Poster</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/po_004764_hplc_vanquish_2dlc_mabs_analysis_bioreactor_samples_po004764_na_en_7a99c1b683.pdf"><strong>Full PDF for download</strong></a></li></ul><p>Monitoring quality attributes throughout the upstream processing of mAbs is critical due to potential effects of biological variability on product safety and efficacy. Thus, there is a growing need for streamlined analytical workflows that provide timely and reliable insights to enable fast and informed process decisions.</p><h4><strong>Materials and methods</strong></h4><ul><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/743"><strong>Thermo Scientific Vanquish Flex Simple</strong></a> Switch 2D-LC system for loop heart-cutting consisting of Quaternary Pump F (VF-P20-A), Binary Pump F (VF-P10-A-01), Dual Split Sampler FT (VF-A40-A-02), 2x Column Compartment H (VH-C10-A-03), and Diode Array Detector FG (VF-D11-A-01)&nbsp;</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1490"><strong>Thermo Scientific Orbitrap Exploris MX Mass Detector</strong></a> (BRE725536) with BioPharma option (BRE725539)&nbsp;</li><li>Thermo Scientific MAbPac Protein A column, 12 µm, 4 x 35 mm (PN 082539)&nbsp;</li><li>Thermo Scientific ProPac 3R SCX, 2 x 50 mm, 3 µm (PN 43103-052068)&nbsp;</li><li>Thermo Scientific MAbPac SEC-1, 5 µm, 4 x 300 mm (PN 074696)</li></ul><h4><strong>Data analysis&nbsp;</strong></h4><p><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/76"><strong>Thermo Scientific Chromeleon 7.3.2 Chromatography Data System (CDS) </strong></a>and <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1837"><strong>Thermo Scientific BioPharma Finder 5.2 software</strong></a></p><h4><strong>Conclusions&nbsp;</strong></h4><ul><li>Switchable 2D-LC-UV/MS offers a streamlined approach for at-line monitoring of mAb titer, charge and size variants directly from the bioreactor in &lt;1h.&nbsp;</li><li>UV monitoring provides quick and simple trendlines, while HRAM-MS allows deep characterization at intact level.&nbsp;</li><li>Near real-time information supports in-time process decisions to protect yield and product quality.</li></ul><h3><strong>5. Waters Corporation / ASMS: SOFTWARE TOOLS FOR AUTOMATED LC/MS ANALYSIS OF CRITICAL QUALITY ATTRIBUTES OF mRNA MOLECULES</strong></h3><ul><li>Poster</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/720009414_52de0bb71a.pdf"><strong>Full PDF for download</strong></a></li></ul><div><div><section><div><div><div><div><div><div><p>This poster presents an automated LC-MS workflow for evaluating three critical quality attributes (CQAs) of mRNA therapeutics: <strong>5′-capping efficiency, Poly(A) tail length and heterogeneity, and mRNA sequence integrity</strong>. A custom firefly luciferase (Fluc) mRNA construct containing a Cap-1 structure, 1,919 nucleotides, and a Poly(A) tail was used as the model sample. Importantly, all three CQAs were assessed using a <strong>single LC-MS assay</strong>, supported by specialized waters_connect software tools designed to streamline nucleic acid characterization from sequence entry through final data processing.</p><p>The analytical platform consisted of a <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/191"><strong>Waters ACQUITY Premier Binary UPLC System</strong></a><strong> with TUV detector coupled to a </strong><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1148"><strong>Xevo MRT Q-Tof Mass Spectrometer</strong></a>, which uses multi-reflectron time-of-flight technology. Separations were performed on an ACQUITY Premier OST 1.7 µm, 300 Å, 2.1 × 150 mm column, while data-independent acquisition was carried out in MSE mode. Data processing used the <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1544"><strong>waters_connect</strong></a><strong> Informatics Platform together with SYNTHETIC Library 2.0, MAP Sequence 2.0, and INTACT Mass 1.9</strong> applications. For sequence mapping, the mRNA was independently digested using four endonucleases—RNase T1, RapiZyme MC1, RapiZyme Cusativin, and human RNase4—providing complementary cleavage patterns.</p><p>The workflow produced detailed information on both capping and Poly(A) tail characteristics. The Fluc mRNA showed <strong>100% capping efficiency</strong>, with 62.7% carrying an m7GpppAm Cap-1 structure and 37.3% an m7GpppGm Cap-1 structure; no uncapped digestion product or Cap-related impurities were detected. Poly(A) tail analysis identified ten major species ranging from <strong>98-mer to 107-mer</strong>, resulting in an average Poly(A) tail length of <strong>102.3 nucleotides</strong>. The Xevo MRT Q-Tof provided high-resolution measurements—approximately 100,000 resolution in the examples shown—and very good mass accuracy for the detected Poly(A) species.</p><p>For sequence integrity, combining the four complementary enzymatic digestions achieved <strong>93.7% unambiguous mRNA sequence coverage</strong>, demonstrating the value of a multi-enzyme approach for comprehensive sequence confirmation. MAP Sequence 2.0 also automatically distinguished structural isomers using elevated-energy fragment-ion information, helping resolve isobaric and isomeric digestion products with less manual interpretation. Overall, the poster demonstrates that high-resolution MSE acquisition on the <strong>Xevo MRT Q-Tof combined with automated waters_connect informatics</strong> can provide an integrated and efficient approach for comprehensive characterization of key mRNA quality attributes.</p></div></div></div></div></div></div></section></div></div>

News from LabRulezLCMS Library - Week 32, 2026

Article

Product

Events

Webinars

Application

Academy

Video

Poster

Scientists

Plastics

Environment

Food

Water

Health

Presentation

Scientific article

Interview

Toxicology

Popularization

Science and research

Software

Covid-19

Career

Laboratories

Various

Zaměření

Type of News

Focus

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

European Symposium on Analytical Spectrometry (ESAS) 2026

PFAS Seminar Series

Building regulatory readiness for nitrosamine testing

From Legacy Workflows to Paperless Labs: Track Every Sample, Process, and Decision

Informatics series #34 Ready for Self-Documenting Chromatography?

Ask the Expert: What to expect from the new Thermo Scientific™ Orbitrap™ Excedion™ Hybrid mass spectrometers