<p><strong>In the week of November 2, the following webinars await you in the field of gas / solid phase and especially Raman, FTIR, GC and GC/MS.</strong></p><blockquote><h4><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/webinars"><strong>👉 DETAILS AND REGISTRATION IN THE WEBINARS SECTION</strong></a></h4><p><strong>👉 Search and filter in the largest global database</strong> with over <strong>6 000 GC, LC, MS and spectroscopy webinars</strong>.</p></blockquote><div><div><div><div><h5><span><strong>1. Agilent Technologies: Enhancing GC/MS Workflows for PFAS Analysis in Air</strong></span></h5><ul><li><div><div><span>Tu, 3.11.2026 11:00 CET</span></div></div></li><li><div><div><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/webinar/6600"><span>Registration</span></a></div></div></li></ul><p>Learn how thermal desorption coupled with Agilent GC/MS can support robust analysis of volatile and semi-volatile PFAS in air while addressing sampling and interferent challenges.</p></div><div><h5><span><strong>2. Technology Networks: When Good Analytical Methods Become a Problem</strong></span></h5><ul><li><div><div><span>Tu, 3.11.2026 18:00 CET</span></div></div></li><li><div><div><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/webinar/6678"><span>Registration</span></a></div></div></li></ul><p>Join our webinar on analytical method lifecycle management in biopharmaceuticals. Learn when and why to reassess established methods for QC and transfer.</p></div><div><h5><span><strong>3. Separation Science: Driving Productivity with the Next Generation of GC/MS</strong></span></h5><ul><li><div><div><span>We, 4.11.2026 09:00 CET</span></div></div></li><li><div><div><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/webinar/6680"><span>Registration</span></a></div></div></li></ul><p>Boost GC/MS laboratory productivity with Agilent. Leverage GC Assist predictive diagnostics to cut run times and reduce energy and gas consumption.</p></div><div><h5><span><strong>4. C&amp;EN: From Reaction to Release: Raman and NIR Analysis for Fertilizer Production</strong></span></h5><ul><li><div><div><span>We, 4.11.2026 19:00 CET</span></div></div></li><li><div><div><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/webinar/6698"><span>Registration</span></a></div></div></li></ul><p>Learn how Raman and NIR spectroscopy can accelerate fertilizer production analysis, reduce reagent use, and support reliable quantitative measurements for phosphate, urea, and ammonium nitrate.</p></div><div><h5><span><strong>5. Metrohm: Bring Your Work to Kids: Test, Don't Guess</strong></span></h5><ul><li><div><div><span>Th, 5.11.2026 10:00 CET</span></div></div></li><li><div><div><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/webinar/6699"><span>Registration</span></a></div></div></li></ul><p>Join Metrohm and RI Analytical for a fun 30-minute science experience where kids become science detectives and discover how analytical testing helps keep water, toys, and everyday products safe.</p></div><div><h5><span><strong>6. AZoM: Gas Analysis Across Semiconductor Manufacturing: From Bulk Gas Quality to Process Emissions</strong></span></h5><ul><li><div><div><span>Th, 5.11.2026 17:00 CET</span></div></div></li><li><div><div><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/webinar/6682"><span>Registration</span></a></div></div></li></ul><p>Join the Thermo Fisher Scientific webinar on semiconductor gas analysis. Discover APIX UHP and MAX-iR FTIR for high-purity gas and emissions control.</p></div><div><h5><span><strong>7. Restek Corporation: The Next Evolution in Multi-Pesticide Analysis: Enhancing GC-MS/MS Robustness and Sensitivity</strong></span></h5><ul><li><div><div><span>Th, 5.11.2026 20:00 CET</span></div></div></li><li><div><div><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/webinar/6732"><span>Registration</span></a></div></div></li></ul><p>Improve GC-MS/MS sensitivity and robustness in pesticide residue analysis of complex food matrices with next-generation GC column technologies.</p></div></div></div></div>

Webinars LabRulezGCMS Week 45/2026

<p><strong>Our Library never stops expanding. What are the most recent contributions to LabRulezGCMS Library in the week of 2nd November 2026? Check out new documents from the field of the gas phase, especially GC and GC/MS techniques!</strong></p><blockquote><p><span style="font-size:20px;">👉 </span><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library"><span style="font-size:20px;"><strong>SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT GCMS AND RELATED TECHNIQUES</strong></span></a></p></blockquote><blockquote><p><strong>👉 Need info about different analytical techniques?</strong> Peek into <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library"><strong>LabRulezLCMS</strong></a> or <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library"><strong>LabRulezICPMS</strong></a> libraries.</p></blockquote><h3><strong>1. LECO: Battery Solvent Characterization: Identifying Impurities in Dimethyl Carbonate</strong></h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/pdf/PEGBTX_HRT_BATTERY_SOLVENT_DIMETHYL_CARBONATE_203_821_731_d2f15e413d.pdf"><strong>Full PDF for download</strong></a></li></ul><section><div><div><div><div><div><div><p>Dimethyl carbonate (DMC) is known as an environmentally friendly solvent used in many product streams, including development of rigid plastics, oxygenated additives for diesel, and EPA-approved VOC-exempt coatings and paints. Determination of impurities in DMC is crucial to prove suitability for use and prevent side-reactions in high-performance material production, especially when used as battery electrolyte solvent. The presence of unexpected organic species in DMC can reduce the overall efficiency of the batteries by degrading solid electrolyte interfaces on battery anodes, creating complexes that consume lithium ions, or producing unexpected gas buildup that leads to safety hazards during battery use. A clearer understanding of unintentional byproducts in DMC assists with refining the solvent production process, improving energy efficiency for generating high-purity solvent and for downstream solutions dependent on quality components.&nbsp;</p><p>The extraordinary sensitivity of the Pegasus BTX allows for detection of below-ppb-level contaminants. Coupled with + complementary data from the high-resolution Pegasus HRT , confident identification of byproduct species including nitriles, alcohols, and other hydrocarbons can be confirmed.</p><h4><strong>Experimental&nbsp;</strong></h4><p>A producer-provided sample of dimethyl carbonate solvent was analyzed on the <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/products/1097"><strong>Pegasus BTX</strong></a> and <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/products/39"><strong>Pegasus HRT</strong></a> to assess purity and identify potential unknown contaminants. After a short gas chromatography (GC) separation (<a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/gcms/library?mainauthorItems=10&amp;search=8890"><strong>Agilent 8890 GC</strong></a>), electron ionization + (EI) mass spectral information was produced on the Pegasus BTX, while the Pegasus HRT produced high-resolution, accurate mass spectra in multiple modes, including EI and methane-assisted positive chemical ionization (PCI) using a single ionization source. EI spectra for peaks of interest were library-matched against NIST and Wiley spectral libraries for preliminary identification. High resolution accurate mass was leveraged to further confirm library hit assignments; in cases where molecular ion was low abundance or not present in EI spectra, PCI spectra from corresponding peaks were used to confirm molecular ion and other methane-adducts when available.</p><h4><strong>Conclusions&nbsp;</strong></h4><p>Unparalleled sensitivity of the Pegasus BTX paired with high-resolution mass spectral data from the Pegasus HRT confirmed identification of several previously undetected compounds of interest in a sample of dimethyl carbonate, providing useful insight into the solvent manufacturing process.</p><h3><strong>2. Shimadzu: 3.5 min Total Petroleum Hydrocarbons (TPH) Analysis Using the Nexis GC-2030 and H2 Carrier</strong></h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/pdf/an_08_sop_03_gc_0726_en_cf3b061ecc.pdf"><strong>Full PDF for download</strong></a></li></ul><h5><strong>User Benefits</strong></h5><ul><li>Analysis times can be significantly shortened by using the Nexis GC-2030 (230 V), an oven insert, and hydrogen as the carrier gas.</li><li>Using dual injectors, throughput can be greatly improved, enabling the analysis of more than 400 samples per day</li></ul><p><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/gcms/library?mainauthorItems=1&amp;search=gc-2030"><strong>Shimadzu’s Nexis GC-2030</strong></a> can analyse over 400 samples in a single day, due to a highly optimised method that has an injection-to-injection time of lessthan 7 minutes per sample, or 3.5 minutes per sample, with dual injectors running simultaneously.&nbsp;</p><p>This method can resolve C10 to C40 alkanes, allowing it to be applied to almost all TPH/TRH applications. C6 to C40 can be resolved with a modified method (Figure 1). During the production and use of petroleum hydrocarbon products, the environment, including waters and soils can be contaminated. Petroleum hydrocarbons do not, in general, biodegrade readily. Furthermore, some pose risks to health, consequently, the control of contamination is important.&nbsp;</p><p>The analysis of petroleum products in waters and soils is commonly referred to as TPH (Total Petroleum Hydrocarbon) or TRH (Total Recoverable Hydrocarbon), which covers a range of standardised method variants. Some classes of petroleum products pose greater risks than others. Hence, reporting the total concentration of TPH does not provide a reliable basis for evaluating the potential risks to the environment and human health.&nbsp;</p><p>For this reason, the chromatographic separation is divided into bands and resolves the analytes based on carbon atom (C) numbers.</p><h4><strong>Optimisation of method speed</strong></h4><p>Traditionally, TPH columns are selected with a thinner film thickness to reduce elution times of the high-boiling components. This often impacts the resolution of the low boilers from the solvent. Consequently, the GC oven starting temperature is typically low (30-35 ˚C), resulting in extremely long cool-down timesthat greatly limit sample throughput.</p><p>The Rxi-1ms column from Restek, with non-conventional dimensions (Table 2), was selected to improve sample throughput. This allows for separation of the volatile components from the solvent at a higher starting temperature and reduces retention of the high-boiling hydrocarbons up to C40 (Figure 2).</p><h4><strong>Conclusion&nbsp;</strong></h4><p>Shimadzu’s GC-2030 with split/splitless inlet and FID offers an ideal solution for TPH and TRH analysis across the widest boiling point range. The GC-2030NX’s high-performance oven and the use of hydrogen carrier gas facilitate a very short run time. The combination of this, with a dual line configuration, results in injection-to-injection run times of below 3.5 minutes per sample.&nbsp;</p><p>Over a 24-hour period, a single GC-2030 instrument is able to analyse over 200 samples. With dual FID-2030s fitted, a single GC-2030 can analyse over 400 samples in a 24-hour period The Labsolutions GC software’s highly flexible integration parameters allow various baselines and bandings to be performed automatically. This offers easy conversion from existing Chromatography data systems (CDS).</p><h3><strong>3. Waters Corporation: Extending PFAS Analytical Workflows with APGC-MS/MS Analysis: Analysis of Environmental and Food Packaging Samples</strong></h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/pdf/720009614_en_ec5bd7690e.pdf"><strong>Full PDF for download</strong></a></li></ul><h5><strong>Benefits</strong></h5><ul><li>An APGC-MS/MS method for the analysis of 35 GC-amenable PFAS allowing for characterization of PFAS samples beyond the suite of commonly targeted LC-MS/MS compounds, enabling a more complete assessment of PFAS burden&nbsp;</li><li>Sensitive and robust analysis to detect GC-amenable PFAS in complex sample matrices, supporting reliable data generation across diverse sample types&nbsp;</li><li>Provides complementary information to LC-MS/MS workflows by identifying PFAS precursor compounds and transformation pathways, helping laboratories better understand contamination sources, environmental fate, and treatment outcomes&nbsp;</li><li>Enables confident monitoring of food contact materials at concentrations well below emerging European regulatory limits, supporting compliance testing and regulatory preparedness&nbsp;</li><li>Expands laboratory capabilities beyond routine targeted PFAS analysis, allowing customers to deliver comprehensive investigations, differentiate their analytical services, and generate deeper insight into PFAS occurrence in environmental samples</li></ul><p>While liquid chromatography coupled with mass spectrometry (LC-MS) remains the dominant approach for routine PFAS analysis, it is not well suited for all PFAS classes. A subset of PFAS compounds, particularly volatile and semi-volatile species, exhibit chromatographic and analytical characteristics that favor gas chromatography (GC)-based methods. These include fluorotelomer alcohols (FTOHs), fluorotelomer acrylates (FTAcrs), fluorotelomer methacrylates (FTMACs), fluorotelomer acetates (FTOAcs), and several related precursor compounds. Other PFAS classes, such as sulfonamides and sulfonamidoethanols, can be successfully analyzed using either LC or GC platforms.&nbsp;</p><p>Many GC-amenable PFAS are recognized as precursor compounds because they can undergo environmental and biological transformation to form PFCAs and perfluoroalkyl sulfonates (PFSAs), the terminal degradation products that have been the focus of most PFAS monitoring and toxicological studies. In addition to their role in PFAS manufacturing processes, these compounds have historically been incorporated into commercial products, including food contact materials and textile treatments, where they provide oil, stain, and water-resistant properties. The environmental behavior of these precursor compounds differs from that of many ionic PFAS due to their increased volatility, which enables atmospheric transport and deposition over long distances. As a result, they can contribute to PFAS contamination through pathways that are not fully captured by conventional LC-based analytical approaches. Although toxicological information for many of these compounds remains limited, their potential health impacts and their ability to generate persistent PFCA and PFSA transformation products have increased interest in their measurement and environmental occurrence.&nbsp;</p><p>FTOH, FTAcr, FTMAC, PFSA, N-xFOSA, and N-xFOSE compounds are known to have been used as raw materials in the synthesis of surface protectants, such as those used to grease proof paper and paperboard food packaging materials.<sup>1</sup> In recent years, global efforts have been made to phase out and ban their use in food contact materials. In 2020, the US Food and Drug Administration (FDA) announced the voluntary removal of 6:2 FTOH for use in food contact materials with complete removal of all packaging containing this compound in 2025.<sup>2,3</sup> Furthermore, in 2025, 35 Food Contact Notifications (FCNs) for PFAS compounds that declare the use of a substance safe in food contact materials were revoked by the FDA.<sup>4</sup> Concurrently, from August 12, 2026, Regulation (EU) 2025/40 restricted PFAS in food contact packaging enforcing strict limits for individual targeted PFAS, the sum of targeted PFAS, and total PFAS content.<sup>5</sup> In accordance with this regulation, a limit of 25 ppb was set for individual targeted PFAS in any food packaging material.&nbsp;</p><p>As discussed in a previous application note, atmospheric pressure gas chromatography coupled with tandem quadrupole mass spectrometry (APGC-MS/MS) provides a sensitive approach for the determination of volatile and semi-volatile PFAS.<sup>6</sup> The development of the method and the overall method performance are discussed there. The work presented here extends that methodology to the analysis of authentic environmental and food packaging samples, demonstrating the value of GC-MS/MS techniques for more comprehensive PFAS characterization and improved understanding of PFAS sources and transformation pathways.</p><h4><strong>Experimental</strong></h4><ul><li><strong>GC system:</strong> <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/gcms/library?mainauthorItems=10&amp;search=8890"><strong>Agilent 8890 Gas Chromatography System&nbsp;</strong></a></li><li><strong>Autosampler: </strong><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/gcms/library?mainauthorItems=10&amp;search=7693A"><strong>7693A Automatic Liquid Sampler</strong></a></li><li><strong>MS system:</strong> <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/products/554"><strong>Xevo™ TQ Absolute Mass Spectrometer</strong></a></li><li><strong>Software: </strong><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/products/1544"><strong>waters_connect™ for Quantitation Software</strong></a></li></ul><h4><strong>Conclusion&nbsp;</strong></h4><p>The APGC-MS/MS method developed for the analysis of 35 GC-amenable PFAS demonstrated robust performance across diverse environmental and food packaging matrices, providing sensitive and selective detection of volatile and semi-volatile PFAS that are not routinely captured by LC-MS/MS alone. Application of the method identified FTOHs as the predominant GC-amenable PFAS in wastewater and soil samples. This method proved to be complementary to previous LC-MS/MS analysis by identifying precursor compounds that appear to have transformed into terminal PFCAs during the treatment process. The method also successfully characterized PFAS contamination associated with ski wax application and showed good accuracy for most target analytes in environmental matrices. Analysis of paper and paperboard food packaging materials did not detect any of the targeted PFAS, suggesting compliance with current regulatory restrictions for the compounds included in this study. Post-spike experiments confirmed the method's suitability for monitoring PFAS at concentrations well below emerging European regulatory limits. By expanding PFAS characterization beyond routinely monitored analytes, the combined APGC-MS/MS and LC-MS/MS workflow provides laboratories with greater confidence when investigating PFAS sources, environmental fate, and regulatory compliance. Overall, the method performance was strong, demonstrating that APGC-MS/MS is a valuable complementary tool to LCMS/MS for PFAS characterization, environmental monitoring, source identification, and regulatory compliance testing.</p></div></div></div></div></div></div></section>

News from LabRulezGCMS Library - Week 45, 2026

<p><strong>Light and urea. These are two "basic ingredients" that can be enough for effective and gentle water purification. This has been proven by new research conducted by scientists from CEITEC Brno University of Technology (BUT). Although this is only basic research and scientists will continue to build on it, its results can already be used in practice.</strong></p><p>Urea is an organic substance that is commonly found in nature. Thanks to this, it is widely available.</p><p>The key is its modification, in which scientists obtain a special compound of carbon and nitrogen from it. This can then be used for photocatalysis. <i>"Our compound therefore serves as a catalyst that is activated by incident light. Thanks to this, substances that eliminate impurities present in water begin to be released,</i>" says <strong>Daina Arenas Buelvas</strong> from the <i>Quantum Molecular Magnetism</i> team at CEITEC BUT, who led the research.</p><p>This represents a significant shift compared to current methods. Filters that capture impurities are now used to purify water. These filters then need to be removed and the captured substances disposed of. The carbon and nitrogen compound formed from urea, when hit by the light, both captures and decomposes pollutants. In laboratory tests this is done with an efficiency of up to <strong>97%</strong>.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/CEITEC_Cisteni_vody_pomoci_svetla_Laboratorni_testy_prokazaly_ucinnost_az_97_2_719253ff50.jpeg" alt="CEITEC BUT/Jakub Rozboud:  Purifying Water Using Light? Laboratory Tests Have Shown 97% Efficiency: Daina Dayana Arenas Buelvas preparing samples." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_CEITEC_Cisteni_vody_pomoci_svetla_Laboratorni_testy_prokazaly_ucinnost_az_97_2_719253ff50.jpeg 235w," sizes="100vw" width="1600" height="1067"></p><h3><strong>A unique method that freezes particles</strong></h3><p>The research is also unique thanks to the technology used. The scientists used <strong>EPR spectroscopy</strong>, which can capture free radicals whose lifetime is only a few nanoseconds and “freezes” them, giving scientists the space to examine them.</p><p><i>“This allowed us to describe the entire reaction that took place in the material. We thus obtained information that we and other scientists can use in follow-up research,”</i> points out Daina Arenas Buelvas.</p><blockquote><p>Researchers use a technique called<i> spin trapping</i> to confirm that the material produces reactive oxygen species that break down impurities. Since these molecules are too short-lived to be detected directly, a special 'trap' molecule is added to convert them into a stable, measurable compound, definitively proving that the material generates the active cleaning agents.</p></blockquote><p>The results of the research were <a target="_blank" rel="noopener noreferrer" href="https://www.sciencedirect.com/science/article/pii/S2214993726002150?via%3Dihub"><strong>published</strong></a><strong> </strong>in the prestigious scientific magazine <i>Sustainable Materials and Technologies</i>. In addition to the <i>Quantum Molecular Magnetism</i> team of Vinicius Tadeu Santana from CEITEC BUT, the Brazilian scientific teams of Felipe La Porta from the University of Paraná and Débora Quadreli from the University of Londrina, and the team of Christian M. M. Rocha from the University of Barranquilla, Colombia, also participated in it.</p><h3><strong>They will test the use against microplastics</strong></h3><p>The scientists verified the effectiveness of graphitic carbon nitride, which is the name of the used carbon and nitrogen compound, in water contaminated with methylene blue. Thanks to the photocatalytic reaction, the compound removed 97.2% of the impurities.</p><p>The wide availability of urea and the easy treatment required to obtain the key compound allow for rapid implementation in practice. At the same time, other scientific works can follow up on this research.</p><p>Daina Arenas Buelvas also plans to do the same. <i>"I want to find out whether it is possible to use photocatalysis in graphitic carbon nitride to remove microplastics. But we are only at the beginning," </i>adds the scientist, who came to the Czech Republic from Colombia.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/CEITEC_Cisteni_vody_pomoci_svetla_Laboratorni_testy_prokazaly_ucinnost_az_97_3_0b9e23b800.jpeg" alt="CEITEC BUT/Jakub Rozboud:  Purifying Water Using Light? Laboratory Tests Have Shown 97% Efficiency: EPR laboratory at CEITEC BUT." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_CEITEC_Cisteni_vody_pomoci_svetla_Laboratorni_testy_prokazaly_ucinnost_az_97_3_0b9e23b800.jpeg 235w," sizes="100vw" width="1600" height="1067"></p><blockquote><h4><strong>Article&nbsp;</strong></h4><h4><a target="_blank" rel="noopener noreferrer" href="https://www.sciencedirect.com/science/article/abs/pii/S2214993726002150?via%3Dihub"><strong>Unraveling precursor effects on the cytotoxicity, adsorption and photocatalytic Performance of g-C3N4 materials: Insights from experimental and computational approaches</strong></a></h4><p>Daina D.A. Buelvas, João P.A. de Jesus, Lucie Kotásková, Christian M.M. Rocha, Débora H. Quadreli, Juliana M. Serpeloni, Glaura S.A. Fernandes, Bruno L.S. Vicentin, Vinicius T. Santana, Felipe A. La Porta&nbsp;</p><p><span><strong>Sustain. Mater. Technol.</strong>, 2026, <strong>48</strong>, e02064</span></p><p><a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1016/j.susmat.2026.e02064"><span>10.1016/j.susmat.2026.e02064</span></a></p></blockquote>

 Purifying Water Using Light? Laboratory Tests Have Shown 97% Efficiency 

Article

Webinars

Application

Water

Science and research

Since its establishment in 2011, CEITEC has quickly developed into a cutting-edge infrastructure for research which performs highly alongside the best institutes in Europe. Among the main priorities of CEITEC are the promotion of a motivating and dynamic international scientific environment, the provision of state-of-the-art research infrastructure, and the policy of open communication and equal opportunities.

CEITEC

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Agilent foreline hose with embedded spring, G7077-60119 (New)

Foreline vacuum hose with an embedded spring, designed to provide kink-resistant and reliable vacuum connections between pump and system.

 Agilent SC10 Lite Mini-ITX motherboard for 7250 GC/Q-TOF, G7250-65054 (New)

Agilent SC10 Lite motherboard G7250-65054 for 7250 GC/Q-TOF systems designed for instrument control and data acquisition.

Agilent Turbo-V 301 Navigator is a turbomolecular pump, 9698918M006 (Tested)

The Agilent Turbo-V 301 Navigator (9698918M006) is a turbomolecular pump designed for GC/MS and other analytical systems requiring high vacuum. Its compact design ensures efficient pumping for use with modern mass spectrometry systems.

Agilent Analog Micro-ion e-gauge, G2581-80301 (Tested)

Original Agilent Analog Micro-ion e-gauge G2581-80301 for selected GC/MS Q-TOF and LC/MS systems.

 Agilent Pulser Assy 7250A Support, G7250-67165 (Testováno)

Agilent G7250-67165 is an original Pulser Assembly for service and repair of the Agilent 7250A GC/Q-TOF mass spectrometer.

Agilent Spellman Medusa 766 High Voltage Power Supply Assembly, G2581-69766 (Tested)

Agilent G2581-69766 is a Spellman Medusa 766 High Voltage Power Supply Assembly for servicing the high-voltage electronics of compatible Agilent TOF/Q-TOF mass spectrometers.

Agilent 7200 Series GC/Q-TOF System (Refurbished)

The Agilent 7200 Series Quadrupole Time-of-Flight (Q-TOF) Gas Chromatograph/Mass Spectrometer (GC/MS) system is designed for high-performance analytical applications. It combines the separation capabilities of gas chromatography with the precise mass analysis of Q-TOF, making it ideal for complex sample analysis

Agilent 7200 Series GC/Q-TOF (Refurbished)

The Agilent 7200 Series GC/Q-TOF represents a revolutionary quadrupole time-of-flight gas chromatography/mass spectrometry (GC/MS) system, providing comprehensive full-spectrum, high-resolution, accurate-mass data essential for screening, profiling, and identifying GC-amenable compounds.

Agilent Turbo V301 SplitFlow, used with series 7200 GCMS, G3850-80020 (Tested)

Agilent Turbo V301 SplitFlow Pump (G3850-80020) delivers stable high-vacuum performance and efficient ion transfer for Agilent 7200 GC/Q-TOF systems.

Marketplace products focused on GC/HRMS from LabRulez - page 1

Related content

Purifying Water Using Light? Laboratory Tests Have Shown 97% Efficiency

News from LabRulezGCMS Library - Week 45, 2026

Webinars LabRulezGCMS Week 45/2026