Taťána Gazárková is currently a&nbsp;postdoctoral fellow in the Laboratory of Antibiotic Resistance and Microbial Metabolomics. During her doctoral studies, she focused on chromatography and mass spectrometry. Recently, she was awarded second place in the “Sanofi Prize for Pharmacy 2026” competition.Taťána Gazárková is currently a&nbsp;postdoctoral fellow in the Laboratory of Antibiotic Resistance and Microbial Metabolomics. During her doctoral studies, she focused on chromatography and mass spectrometry. Recently, she was awarded second place in the “Sanofi Prize for Pharmacy 2026” competition, which is awarded by the French Embassy in the Czech Republic for her dissertation – Steroid Analysis Using Modern Chromatographic and Mass Spectrometry Techniques: From Fundamental Studies to Targeted Bioanalytical Applications (supervisor: Lucie Nováková, Charles University).&nbsp;<h5>What makes this field particularly exciting or unique in your view?</h5>What I&nbsp;enjoy about analytical chemistry is that, to a&nbsp;certain extent, it is a&nbsp;kind of detective work. You are often looking for ways to “make the invisible visible”. In other words, extract the information you are interested in from a&nbsp;complex sample and then interpret it correctly. What also appeals to me about bioanalytical chemistry is its interdisciplinary nature. It brings together analytical chemistry, biochemistry, biology and medicine, which means that you need to be able not only to translate a&nbsp;biological or clinical question into a&nbsp;measurable analytical experiment, but also to place the resulting data back into a&nbsp;broader biological context. This combination of different perspectives is probably what I&nbsp;enjoy most about the field. At the same time, there is still plenty of room for fundamental research, ranging from studying analytical techniques themselves and improving them to developing new methodological approaches.<h5>How did you end up at the <a target="_blank" rel="noopener noreferrer" href="https://mbu.cas.cz/en/research/laboratory-of-antibiotic-resistance-and-microbial-metabolomics">Laboratory of Antibiotic Resistance and Microbial Metabolomics</a>, and what project are you currently working on?</h5>I came to the Institute of Microbiology through a&nbsp;joint project between Dr Zdeněk Kameník and Assoc. Prof. Jan Bobek from the First Faculty of Medicine, Charles University. For me, it was also an opportunity to move from targeted analysis and the study of chromatographic techniques towards untargeted metabolomics and new biological questions.In the project, we are trying to identify new biologically active compounds that would be effective, particularly against pathogenic fungi. As a&nbsp;potential source of such compounds, we study streptomycetes, bacteria known for their ability to produce a&nbsp;wide range of biologically active compounds, including many antibiotics that are currently in clinical use. We focus on less-explored host-associated streptomycetes, in which we had already observed antifungal activity in previous experiments. We are especially interested in strains active against Candida albicans whose activity cannot be explained by the presence of a&nbsp;known bioactive compound. These strains may represent an interesting source of novel compounds. We then integrate the results of untargeted metabolomic analyses with genomic analyses, which allows us to obtain a&nbsp;more comprehensive view of the biosynthetic potential of selected strains.<h5>You also took part in this year’s Vědafest, a&nbsp;science outreach event for the public. What was it like?</h5>I already had some experience with science outreach through events such as Researchers’ Night and the Science Fair at my previous institution, but this year’s Vědafest was still new to me in some ways. This time, I&nbsp;was presenting a&nbsp;field that I&nbsp;myself had entered only relatively recently. It was therefore more challenging to find the right analogies and explain the essence of the topic in a&nbsp;way that was simple, yet precise and scientifically accurate. At the same time, that was exactly what made it inspiring. It forces you to look at your own work from a&nbsp;different perspective. What I&nbsp;enjoyed most was the spontaneity and curiosity of the children, who often came up with questions that would never even occur to an adult.<h5>What are the biggest challenges you face on your scientific journey, and what helps you overcome them?</h5>One of the greatest, but at the same time most interesting, challenges is, in my view, the uncertainty that is inseparably linked to research. For a&nbsp;long time, you often do not know whether you have taken the right direction in addressing a&nbsp;particular question or whether you will ultimately manage to find that figurative final piece of the puzzle. At the same time, this uncertainty is precisely what makes science exciting for me.Another major challenge, particularly in interdisciplinary projects, is communication. It is important from the very formulation of a&nbsp;hypothesis and the planning of experiments through to the interpretation of results, including negative ones, and placing them in a&nbsp;broader context. To some extent, every field has its own language, and finding a&nbsp;common understanding is not always straightforward. Personally, I&nbsp;find it very helpful to be able to discuss problems with colleagues on an ongoing basis, whether individually or during regular laboratory seminars. One of the major strengths of our current group is its interdisciplinary nature, which allows me to look at the same problem from several different perspectives. It is also important for me not to lose my curiosity, because that is ultimately what leads us to ask further questions.<h5>What are your plans after completing your PhD?</h5>After finishing my PhD, I&nbsp;decided that I&nbsp;do not need to have everything that comes next precisely mapped out straight away. I&nbsp;would like to keep different options open for a&nbsp;while and continue building on my experience in analytical chemistry, while at the same time connecting it with other areas that have a&nbsp;biological or medical relevance. I&nbsp;believe that we can keep learning throughout our lives, so I&nbsp;am quite curious to see where the next stage of my journey will take me.Thank you for the interview!

Interview: What Drew Postdoc Taťána Gazárková to Analytical Chemistry

Per- and polyfluoroalkyl substances (PFAS) have earned the moniker "forever chemicals" due to their extreme persistence in the environment. Their detection is crucial for protecting public health and the environment as these synthetic compounds continue to pose significant challenges worldwide. This comprehensive exploration examines why PFAS detection matters, current detection methods, and future directions in addressing PFAS contamination.<h3>Understanding PFAS and Their Health Impacts</h3>PFAS are a class of synthetic organic compounds with diverse structures, properties, and uses. Despite their diversity, all PFAS contain perfluoroalkyl moieties that are extremely resistant to environmental and metabolic degradation [1]. This high persistence is a defining characteristic that makes PFAS management particularly challenging.<h3>Documented Health Effects</h3>Current scientific research has linked PFAS exposure to numerous adverse health outcomes:<ul><li>Reproductive effects including decreased fertility and increased high blood pressure in pregnant women [8]</li><li>Developmental effects in children such as low birth weight, accelerated puberty, and behavioral changes [8]</li><li>Reduced immune system function, including decreased vaccine response</li><li>Interference with natural hormones and endocrine disruption</li><li>Increased cholesterol levels and obesity risk</li><li>Increased risk of several cancers, including prostate, kidney, testicular, oral cavity/pharynx, brain, and endocrine cancers [3]</li></ul>A 2023 study linked PFAS-contaminated water with up to a 33% increase in cancer incidence in affected areas [3]. The study compared regions with elevated PFAS levels to cancer data from the National Cancer Institute, finding higher incidences of various cancers after controlling for factors like smoking and obesity.<h3>Environmental Persistence and Contamination</h3>The extreme persistence of PFAS represents a fundamental concern for environmental management. PFAS are considered the most environmentally persistent substances among organic chemicals [7]. This persistence means that even if all PFAS uses were immediately phased out, existing contamination would continue to affect ecosystems and water supplies for generations.A 2023 study at a military fire training site estimated that PFAS contamination will persist for centuries without remediation [7]. The research found that terminal PFAS still exceed regulatory limits by 2000-fold decades after aqueous film-forming foam (AFFF) use ceased, with precursors accounting for around half of the extractable organofluorine across years.<h3>Current Detection Methods</h3><h4>EPA Standardized Methods</h4>The Environmental Protection Agency (EPA) has developed several standardized methods for PFAS detection, each with specific applications and capabilities:<h5>EPA Method 533</h5><a target="_blank" rel="noopener noreferrer" href="https://blog.organomation.com/blog/epa-533-drying-down-pfas-samples-after-spe">EPA Method 533</a> focuses on "short chain" PFAS with carbon chain lengths of C4 to C12. Released in December 2019, this method complements Method 537.1 and includes several key features:<ul><li>Uses isotope dilution quantification approach with extracted internal standards, which reduces overall analytical uncertainty</li><li>Employs weak anion exchange solid phase extraction cartridges as opposed to polystyrene divinylbenzene used in 537.1</li><li>Can analyze 25 PFAS compounds, including additional short-chain PFAS that were not apart of Method 537.1</li><li>Allows for longer holding times: 28 days to extraction and 28 days to analyze (compared to 14 days to extraction in Method 537.1)</li><li>Uses ammonium acetate as a preservative (versus Trisma in Method 537.1) [1]</li></ul><h5>EPA Method 537/537.1</h5><a target="_blank" rel="noopener noreferrer" href="https://blog.organomation.com/blog/sample-concentration-epa-method-537-pfas-determination">EPA Method 537 </a>was first published in 2009 for the determination of 14 PFAS in drinking water [6]. It was later updated to Method 537.1 in 2018 (with editorial updates in 2020) to expand its capabilities:<ul><li>Uses<a target="_blank" rel="noopener noreferrer" href="https://www.organomation.com/what-is-solid-phase-extraction-spe"> solid phase extraction (SPE) </a>and<a target="_blank" rel="noopener noreferrer" href="https://www.organomation.com/preparing-samples-for-lc-ms/ms-analysis"> liquid chromatography/tandem mass spectrometry (LC-MS/MS)</a></li><li>Method 537.1 expanded detection to 18 PFAS compounds, including HFPO-DA (one component of GenX technology)</li><li>Utilizes styrene-divinylbenzene (SDVB) media for extraction</li><li>Requires samples to be extracted within 14 days and analyzed within 28 days</li><li>Methanol is used to elute the extracts. This should then be reconstituted with a 96:4 methanol:water mixture [1]</li></ul>Together, Methods 533 and 537.1 can detect a total of 29 unique PFAS compounds in drinking water and are approved for monitoring under the fifth Unregulated Contaminant Monitoring Rule (UCMR 5) and the PFAS National Primary Drinking Water Regulation [1] [3].<h5>EPA Method 1633</h5><a target="_blank" rel="noopener noreferrer" href="https://blog.organomation.com/blog/preparing-diverse-sample-matrices-for-epa-method-1633">EPA Method 1633</a>, released in 2024, represents a significant advancement in PFAS analysis:<ul><li>Developed for the analysis of 40 PFAS compounds in various matrices, including surface water, groundwater, wastewater, soil, biosolids, sediment, landfill leachate, and fish tissue</li><li>Expands beyond the drinking water focus of Methods 533 and 537.1</li><li>Provides a standardized approach that may replace modified drinking water methods (i.e., modified EPA 537) that were previously used for non-drinking water matrices [1]</li></ul><h4>Conventional Analytical Techniques</h4>The gold standard for PFAS analysis involves chromatographic techniques coupled with mass spectrometry:<ul><li>Liquid Chromatography-Tandem Mass Spectrometry (LC-MS/MS) is the most widely used method for PFAS analysis, offering high sensitivity and specificity [1]</li><li>High-Resolution Mass Spectrometry (HRMS) allows for rapid detection and identification of PFAS species at very low concentrations [5]</li></ul>These techniques can detect PFAS at parts per trillion (ppt) levels, which is essential given the low concentrations at which PFAS can cause health effects [1]. However, these methods require sophisticated equipment, specialized training, and significant financial resources, making them inaccessible in many regions, particularly in developing countries.<h4>Emerging Detection Technologies</h4>Several innovative approaches are being developed to address the limitations of conventional methods:<ul><li>Electrochemical biosensors using modified electrodes have shown promise for selective PFAS detection with low detection limits [2]</li><li>Surface-Enhanced Raman Spectroscopy (SERS) uses metallic nanoparticles and can be made into a portable method for on-site testing [1]</li><li>Molecular imprinted polymers (MIPs) offer thermal and physical stability, reusability, and low-cost synthesis for PFAS detection [6]</li></ul>These emerging technologies aim to provide more accessible, field-deployable, and cost-effective alternatives to traditional laboratory-based methods.<h3>Challenges in PFAS Detection</h3><h4>Analytical Challenges</h4>Detecting PFAS presents several technical challenges:<ul><li>The ubiquity of PFAS in laboratory equipment and accessories can lead to background contamination when measuring at parts-per-trillion levels [1]</li><li>Many components in liquid chromatographs, mass spectrometers, and solid-phase extraction systems contain materials that can leach PFAS compounds [9]</li><li>The vast number of PFAS (thousands of compounds) makes comprehensive detection difficult, as analytical standards are only available for a small subset [1]</li><li>Complex matrices like food and environmental samples require sophisticated sample preparation techniques</li></ul><h4>Global Disparities in Detection Capabilities</h4>Access to PFAS detection technology varies significantly worldwide:<ul><li>Many developing regions, particularly in Africa, lack adequately equipped laboratories with the necessary instrumentation to detect and measure PFAS</li><li>There is often a scarcity of qualified professionals with experience in PFAS analysis in these regions</li><li>The high cost of acquiring and maintaining sophisticated analytical instruments presents a substantial obstacle to conducting extensive PFAS investigations in resource-limited settings [1]</li><li>Competing priorities such as infectious diseases, poverty, and food security often divert attention and resources from environmental pollutants like PFAS</li></ul><h4>Regulatory Landscape and Compliance</h4>The regulatory framework for PFAS is evolving rapidly worldwide:<ul><li>The EPA finalized Section 8(a)(7) of the Toxic Substances Control Act in September 2024, requiring manufacturers and importers to report on their use of PFAS since 2011 [10]</li><li>Electronic reporting for PFAS will open on July 11, 2025, with final reporting deadlines in 2026</li><li>Companies must report detailed information including chemical identity, production volumes, industrial and consumer products, worker exposure, and disposal methods [10]</li></ul>These regulations are driving demand for more effective and accessible PFAS detection methods to ensure compliance and protect public health.<h3>Future Directions in PFAS Detection</h3><h4>Technological Advancements</h4>The future of PFAS detection lies in developing more accessible, sensitive, and comprehensive methods:<ul><li>Non-targeted screening methods that can identify unknown PFAS compounds without requiring analytical standards for each specific compound</li><li>Total fluorine analysis techniques like Adsorbable Organic Fluorine and Total Oxidizable Precursor Assay that can quantify the presence of fluorine atoms within a sample [1]</li><li>Portable sensors and field-deployable technologies that enable on-site monitoring and rapid response to contamination events</li><li>AI-driven solutions that can improve data analysis and interpretation for complex PFAS mixtures</li></ul><h4>Collaborative Approaches</h4>Addressing the global challenge of PFAS detection requires coordinated efforts:<ul><li>International partnerships between researchers in developed and developing regions to enhance expertise and capacity building</li><li>Standardization of analytical methods to ensure consistency and comparability of results across different laboratories and regions</li><li>Open data sharing and collaboration across countries to leverage collective knowledge and resources</li><li>Integration of PFAS monitoring into broader environmental and public health surveillance systems</li></ul><h3>Conclusion</h3>The detection of PFAS is not merely a technical challenge but a critical public health and environmental imperative [1]. As these "forever chemicals" continue to persist in our environment, developing effective, accessible, and comprehensive detection methods becomes increasingly important. By advancing detection technologies, strengthening regulatory frameworks, and fostering global collaboration, we can better understand, monitor, and ultimately mitigate the impacts of PFAS contamination.The EPA's standardized methods (533, 537.1, and 1633) provide crucial tools for monitoring PFAS in various environmental matrices, but continued innovation is needed to address the full spectrum of PFAS compounds and to make detection more accessible globally [1] [6]. The path forward requires sustained investment in research and development, capacity building in resource-limited settings, and a commitment to environmental justice that ensures all communities have access to the tools and information needed to protect themselves from PFAS exposure. Only through such comprehensive approaches can we hope to address the complex challenges posed by these persistent pollutants.Be sure to check out our other installments of our&nbsp;<a target="_blank" rel="noopener noreferrer" href="https://blog.organomation.com/blog/introducing-our-environmental-contaminants-series-making-sense-of-the-alphabet-soup">Environmental Contaminant Series</a>&nbsp;covering&nbsp;<a target="_blank" rel="noopener noreferrer" href="https://blog.organomation.com/blog/the-importance-of-detecting-persistent-organic-pollutants-pops">Persistent Organic Pollutants (POPs)</a>,&nbsp;<a target="_blank" rel="noopener noreferrer" href="https://blog.organomation.com/blog/the-importance-of-detecting-polycyclic-aromatic-hydrocarbons-pahs">Polycyclic Aromatic Hydrocarbons (PAHs)</a>,&nbsp;<a target="_blank" rel="noopener noreferrer" href="https://blog.organomation.com/blog/the-importance-of-detecting-semi-volatile-organic-compounds-svocs">Semi-Volatile Organic Compounds (SVOCs)</a>, and <a target="_blank" rel="noopener noreferrer" href="https://blog.organomation.com/blog/the-importance-of-detecting-polychlorinated-biphenyls-pcbs">Polychlorinated Biphenyls (PCBs)</a>.

The Importance of Detecting Per- and Polyfluoroalkyl Substances (PFAS)

Our Library never stops expanding. What are the most recent contributions to LabRulezICPMS Library in the week of 31st August 2026? Check out new documents from the field of spectroscopy/spectrometry and related techniques!<blockquote>👉 <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library">SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT SPECTROSCOPY/SPECTROMETRY RELATED TECHNIQUES</a></blockquote><blockquote>👉 Need info about different analytical techniques? Peek into <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library">LabRulezLCMS</a> or <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library">LabRulezGCMS</a> libraries.</blockquote>This week we bring you brochures by Agilent Technologies and Waters Corporation and application notes by Shimadzu and Thermo Fisher Scientific!<h3>1. Agilent Technologies: Agilent OpenLab ICP-MS Software</h3>Simplify every step of ICP-MS analysisFor Agilent <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/icpms/library?mainauthorItems=10&amp;search=7800">7800</a>, <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/icpms/library?mainauthorItems=10&amp;search=7850">7850</a>, and <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/icpms/library?mainauthorItems=10&amp;search=7900">7900</a> ICP-MS systems, and Agilent <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/icpms/library?mainauthorItems=10&amp;search=8900">8900</a> and <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/icpms/library?mainauthorItems=10&amp;search=9500">9500 ICP-QQQ</a> systems.<ul><li>Brochure</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/pdf/br_openlab_icp_ms_software_5994_9288en_agilent_05f01dcdef.pdf">Full PDF for download</a>&nbsp;</li></ul>The brochure introduces <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/icpms/library?mainauthorItems=10&amp;search=OpenLab+ICP-MS+Software">Agilent OpenLab ICP-MS Software</a>, designed to simplify routine operation and data handling for Agilent 7800, 7850, and 7900 ICP-MS systems and the 8900 and 9500 ICP-QQQ systems. The software supports the complete analytical workflow—from checking instrument readiness and creating batches to acquisition, data review, reporting, and compliance. A central dashboard provides an overview of system status, maintenance requirements, instrument health, and utilization, while Smart EMF and post-run performance checks help users identify when maintenance may be required. Guided Diagnostics, Meter Monitor, and time-stamped system records also support troubleshooting by tracking parameters such as vacuum levels, gas flows, and temperatures.Method and batch setup are designed to reduce manual configuration. Batches can be created from preset methods, templates, existing batches, Method Wizard, or Method Advisor, and legacy Agilent ICP-MS MassHunter batches can be opened directly in OpenLab ICP-MS. For the 9500 ICP-QQQ, Method Advisor provides an element-focused approach in which users select target elements and calibration information while the software applies recommended acquisition masses and cell-gas conditions. Preset methods are available for applications including EPA 200.8/EPA 6020, USP &lt;232&gt;, ICH Q3D, and Chinese Pharmacopoeia requirements, while an IntelliQuant Screening preset supports semiquantitative screening of unknown samples. Routine instrument tasks can also be automated through autotuning, startup checks, batch queues, end-of-run verification, rinse functions, and automatic shutdown.For data evaluation, OpenLab ICP-MS provides a real-time workspace where users can review analyte concentrations, internal-standard recoveries, stability plots, spectra or chromatograms, calibration information, QC charts, and IntelliQuant results in a single view. IntelliQuant acquires a complete mass spectrum and displays semiquantitative elemental concentrations using a color-coded periodic table, while IntelliQuant Star Rating assigns a zero-to-five-star data-quality score based on factors such as potential interferences, calibration quality, background, detection limits, and precision. Reporting options include whole-batch reports, elemental impurity reports for USP &lt;232&gt;/&lt;233&gt; and ICH Q3D, customizable reports, structured CSV export, and direct data transfer to LIMS.The software can be expanded for specialized applications, including LC-ICP-MS and GC-ICP-MS, advanced QC workflows, single-particle ICP-MS and FFF-ICP-MS, ADS 2 automation, semiconductor analysis, and peripheral-device control. Supported analytical approaches include external calibration, standard additions, semiquantitative calibration, isotope ratios, and isotope dilution. For regulated laboratories, OpenLab ICP-MS can be combined with scalable OpenLab compliance solutions providing electronic signatures, user access control, configurable roles, system activity logs, and audit trails, supporting workflows subject to 21 CFR Part 11, EU Annex 11, and equivalent regulations. Overall, the platform is positioned as a unified environment for routine and advanced ICP-MS workflows, combining instrument control, method setup, diagnostics, data-quality assessment, reporting, and compliance support.<h3>2. Shimadzu: Identification of Virgin PET and Recycled PET by X-ray Fluorescence Spectrometry</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/pdf/an_01_01204_en_f3f20ff020.pdf">Full PDF for download</a></li></ul><h5>User benefits</h5><ul><li>EDX enables the identification of recycled PET.&nbsp;</li><li>Measurements are quick and simple, require no cumbersome pretreatment, and can be automated using a multi-sample turret.&nbsp;</li><li>The instrument offers excellent cost-performance and supports the detection of a wide range of elements.</li></ul>Establishing a sustainable circular economy is a major societal challenge, and recycling plastic materials such as PET (polyethylene terephthalate) plays a particularly important role in reducing environmental impact. Large numbers of PET bottles and molded products are used every day in the food and beverage sectors. To recycle these materials safely and reliably, technologies are required that can accurately identify their origin. In practice, however, appearance and conventional physical properties alone are insufficient to distinguish virgin material from recycled material, creating a need for a more reliable identification method.&nbsp;For rapid identification in industrial settings, a method requiring little or no pretreatment is highly desirable. In some cases, nondestructive analysis is also needed to enable subsequent application of other analytical techniques. This article presents a practical approach in which metal catalysts present in PET are detected by EDX (Energy-Dispersive X-ray Spectroscopy) and used to distinguish material-recycled PET from virgin PET.<h4>Principle and Overview&nbsp;</h4>Metal catalysts such as antimony (Sb) and germanium (Ge) are used in the synthesis of PET resin. These catalyst metals have been reported to be useful indicators of material origin. 1),2) For example, Sb and Ge are frequently detected together in material-recycled PET, whereas only one catalyst metal is detected in chemically recycled PET and virgin PET. This likely reflects the fact that material-recycled PET is derived from a mixture of feedstocks using different catalysts.&nbsp;ICP-AES (ICP optical emission spectrometry) and ICP-MS (ICP mass spectrometry), which are commonly applied to catalyst metal analysis, provide high sensitivity and accuracy. However, they require pretreatment to convert the sample into a solution, thereby lengthening the analytical workflow. By contrast, EDX can measure solid samples directly, making it well-suited to applications requiring rapid results, such as incoming material inspection and in-line analysis in molding plants. Because EDX is non-destructive, it is also suitable for multimodal analytical workflows.&nbsp;On the other hand, some commercially available handheld EDX instruments do not support elements such as Sb and Ge. At the same time, higher-end systems may not offer the specifications or price range needed for industrial deployment. The <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/icpms/library?mainauthorItems=1&amp;search=EDX-7200">EDX-7200</a> supports a broad range of elements with excellent cost performance. This article describes the analysis of Sb and Ge in PET using this instrument.<h4>Conclusion&nbsp;</h4>EDX enables rapid and straightforward elemental analysis without cumbersome sample pretreatment. Previous studies have shown that the presence of Sb and Ge can be used to identify recycled PET. Building on this concept, this article presents a practical analytical approach based on EDX. Using the EDX-7200, which combines broad elemental coverage with excellent cost performance, the proposed method provides a practical tool for rapid on-site identification, quality control, and traceability management. When combined with physical property data and other information, this approach is expected to contribute to the safety assessment and quality assurance of recycled materials, thereby supporting a more advanced circular economy.<h3>3. Thermo Fisher Scientific: Optimizing lithium-ion battery recycling operations using handheld XRF analysis</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/pdf/lithium_ion_battery_recycling_handheld_xrf_analysis_an1120_en_4c00477b78.pdf">Full PDF for download</a></li></ul>The shift to a low-carbon economy and the adoption of electric vehicles will drive an exponential increase in the demand for lithium-ion batteries. As a corollary to this, the International Energy Agency expects the demand for some key commodities to increase significantly over the next two decades: the demand for Copper (Cu) is anticipated to increase by more than 40%; for nickel (Ni) and cobalt (Co), by 60-70% each; and for lithium (Li), by nearly 90%.¹ This will translate into increased mining activities and potentially generate larger amounts of deleterious waste.&nbsp;To reduce the environmental impact and limit reliance on scarce commodities associated with economical and geopolitical implications, several countries have implemented regulations regarding producers’ responsibilities.² These regulations contain both incentives and accountability guidelines for lithium-ion battery and electric vehicles manufacturers. Their goal is to facilitate the emergence of a circular economy in which recycling will increasingly contribute to the supply of the strategic raw materials.&nbsp;Lithium-ion batteries are made of multiple components, the most valuable being the cathode that contains between 40 and 70% ³, ⁴ of the total value of the battery, depending on its exact chemistry. As of 2023, lithium nickel cobalt manganese oxides (NCM) account for 66% of lithium-ion battery cathode active materials for electric vehicles, followed by lithium iron phosphates (LFP) which account for 24%, and lithium nickel cobalt aluminum oxide (NCA) accounts for the remaining 10%.³<h4>Handheld X-ray Fluorescence Analysis&nbsp;</h4>Handheld X-ray fluorescence analysis (HHXRF) is an elemental analysis technique that has proven to be cost-effective in recycling areas such as scrap metal and automotive catalytic converters. HHXRF can measure elements from magnesium (Mg) to uranium (U) in various types of materials such as metals and alloys; non-metallic inorganic materials such as ceramics; or ores or plastics. The <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/products/1993">Thermo Scientific™ Niton™ XL2</a> and <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/products/1992">Thermo Scientific™ Niton™ XL5 Plus Handheld XRF Analyzers </a>deliver accurate elemental analysis in real time, with little or no sample preparation, across multiple steps of the lithium-ion battery recycling workflow. Although handheld XRF does not detect lithium, it can measure most elements from the periodic table including nickel or cobalt which often command much higher value than the lithium in a lithium-ion battery.⁴<h4>Conclusion&nbsp;</h4>There is no ideal process to recycle lithium-ion batteries that simultaneously incorporates low environmental impact, high metal recovery yield, and economic viability. Because of the variety of technologies and materials used, recycling lithium-ion batteries is a complex journey with multiple possible paths. HHXRF helps recyclers by generating lab-quality data in real time, allowing them to optimize their processes and make fast decisions that generate significant benefits:&nbsp;<ul><li>Unwanted materials containing heavy metals such as lead or cadmium can be prevented from entering subsequent steps in the recycling workflow.&nbsp;</li><li>Materials can be accurately sorted and adequate processes for recovery selected depending on the material type (e.g., LFP vs. MCM).&nbsp;</li><li>The economic value of incoming and outgoing material can be more accurately estimated.</li></ul><h3>4. Waters Corporation: Waters Aura Systems</h3><ul><li>Brochure</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/pdf/720009268_7b9ad02cb4.pdf">Full PDF for download</a></li></ul>The presentation introduces the Waters Aura Systems, a family of high-throughput, fluidics-free instruments for the characterization and identification of visible and subvisible particles. All Aura platforms provide particle counting, identification, morphology assessment, and flexible sample volumes ranging from microliters to milliliters. The portfolio includes configurations tailored to different applications: AuraBMI for biologics particle analysis, Aura for particle analysis with identification, <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/products/2437">AuraPTx</a> for protein formulation development, <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/products/2438">AuraGT</a> for gene therapy, <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/products/2439">AuraCL</a> for cell therapy, and <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/products/2190">Aura+</a> as the most comprehensive platform. The systems are designed for automation-ready operation, straightforward method transfer, and continuity from research through QC.A key feature of the Aura platform is the combination of Backgrounded Membrane Imaging (BMI), Fluorescence Membrane Microscopy (FMM), and Side Illumination Membrane Imaging (SIMI). BMI captures particles on a membrane and subtracts the membrane background to improve particle contrast, while FMM uses fluorescent dyes or conjugated antibodies to distinguish specific particle types. This enables differentiation of protein aggregates, cells, viral capsids, degraded excipients, plastics, fibers, and other contaminants that may look similar based on morphology alone. SIMI adds further information for identifying unlabeled inorganic particles such as glass, fibers, and Dynabeads. Together, these techniques provide more specific particle identification than morphology-based classification alone.The systems are particularly suited to biologics, gene therapy, and cell therapy development. For gene therapy, Aura can evaluate AAV stability, distinguish capsid-related particles, and monitor DNA leakage using SYBR Gold fluorescence, with measurements possible from as little as 5 µL of sample. For cell therapy, the system can differentiate single cells, cell aggregates, protein aggregates, and extrinsic particles. The platform also supports flexible sample volumes and 24- or 96-well membrane formats, allowing the same general approach to be used from sample-limited early development through larger-volume and QC workflows. The brochure reports excellent quantitative linearity across serial dilutions and emphasizes the ability to preserve sample for additional orthogonal analyses.From a technical perspective, Aura Systems provide 100% sampling efficiency, a particle detection and quantitation range above 1 µm, and can handle concentrations above 3,000,000 particles/mL for 1.6 µm particles. Brightfield membrane imaging takes approximately one minute per sample, while fluorescence measurements require about 15–30 seconds per sample. The instruments are compatible with robotic automation and offer different fluorescence-channel configurations depending on the selected Aura model. Overall, the platform is positioned as a comprehensive solution for obtaining quantitative particle counts together with information on particle identity and composition across the development and quality-control lifecycle.

News from LabRulezICPMS Library - Week 36, 2026

Article

Application

Scientists

Environment

Water

Interview

The Czech Academy of Sciences (CAS) was established by Act No. 283/1992 Coll. as the Czech successor of the former Czechoslovak Academy of Sciences. It is set up as a complex of 54 public research institutions.

Czech Academy of Sciences

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Organomation, founded in 1959, designs and manufactures high-quality nitrogen evaporators and extraction systems. Known for innovation and durability, their lab instruments are used globally for efficient sample preparation with strong customer support.

Organomation

Thermo Scientific™ ARL™ SMS-XY Automation for XRF

The Thermo Scientific™ ARL™ SMS-XY XRF system enables unattended operation, sample prep and analysis with high quality, efficiency, and reduced cost.

<div><div><h4>Increase your capacity to handle more samples in less time.&nbsp;</h4>The Thermo Scientific™ ARL™ SMS-XY Automation for XRF permits continuous and unattended operation of<a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products?instrumentationItems=100&amp;manufacturerItems=3&amp;search=9900"> Thermo Scientific™ ARL™ 9900 series X-ray Spectrometers</a>. Increased automation brings:&nbsp;<ul><li>Higher analysis quality</li><li>Lower analysis costs</li><li>Sustainable analysis cadence with predictable and reproducible response times</li><li>Short payback period</li></ul><h3>Automated Sample Handling</h3>The Thermo Scientific™ ARL™ OEM-XY automated sample loader allows connecting the <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1211">ARL™ PERFORM'X</a> or <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products?instrumentationItems=100&amp;manufacturerItems=3&amp;search=9900">ARL™ 9900</a> series to fully automatic preparation machines. Key features:<ul><li>Prepared samples (usually pressed pellets) are transported via belt conveyor from press to spectrometer</li><li>Unattended operation is ensured by engineering software supervision</li><li>Suitable for cement, metallurgy, and mining applications</li></ul></div><div><h3>Complete Automation with ARL SMS Software</h3>The ARL SMS software provides full automation of Thermo Scientific™ XRF spectrometers for routine production control, including sample preparation and analysis.<h3>Key Benefits:</h3><ul><li>Regular analysis of control samples with SPC evaluation for anomaly detection</li><li>Online connectivity for automatic sample preparation</li><li>Supports up to two sample transfer systems</li><li>Allows manual or online registration of externally prepared samples</li><li>Available as turnkey solution in ARL™ QuantoShelter cabin for production floor deployment</li><li>Seamless integration into quality control and production processes</li><li>Automatic result transmission after analysis</li></ul><h3>Compatible Sample Types:</h3><ul><li>Metallic samples (ferrous and non-ferrous)</li><li>Oxides from metal production (ores, sinters, baths, slags, blast furnace slags)</li><li>Oxides from minerals and cement</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_ARL_SMS_XY_Automation_for_XRF_2_8bce1d83a2.jpg" alt="Thermo Scientific™ ARL™ SMS-XY Automation for XRF" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_ARL_SMS_XY_Automation_for_XRF_2_8bce1d83a2.jpg 179w," sizes="100vw" width="650" height="569"></div></div>

Thermo Scientific ARL SMS-Omega XRF Instrument

Boost production efficiency with fully automated XRF analysis. The ARL OPTIM'X with SMS-Omega ensures high-quality results with unattended prep, rapid WDXRF, and compact design.

Keep up with production demands with automated XRF analysis. When different types of material have to be processed in parallel, the <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1212">Thermo Scientific™ ARL OPTIM'X™ WDXRF Spectrometer</a> with the Thermo Scientific™ ARL™ SMS-Omega XRF Instrument is the solution. Automatic sample preparation and handling without user intervention, combined with rapid analysis, provide high-quality results. This innovative solution has a compact footprint of less than 1 m², so it can be installed in centralized laboratories or on production shop floors, wherever fully automated industrial production control is needed.This cost-effective system is a unique combination of Thermo Scientific XRF and automation technology for fully automated sample preparation and analysis of one material type.<h3>Main Features</h3><ul><li>Unattended instrument monitoring and integrated audit trail functions</li><li>Sample handling arm equipped with a suction device (metals version) or a gripper (oxide version) loads samples for analysis.</li><li>Samples processed under strict identical and reproducible conditions</li><li>Fixed circular magazine</li><li>XRF functionality provided by the flexible and compact <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1212">Thermo Scientific™ ARL™ OPTIM'X WDXRF </a>Instrument</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_ARL_SMS_Omega_XRF_Instrument_2_ee38dccfef.jpg" alt="Thermo Scientific™ ARL™ SMS-Omega XRF Instrument " srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_ARL_SMS_Omega_XRF_Instrument_2_ee38dccfef.jpg 233w," sizes="100vw" width="650" height="435"><h3>Features of the OPTIM'X WDXRF Instrument</h3><ul><li>WDXRF platform with sequential and/or simultaneous capabilities</li><li>Configurable to cover all elements from fluorine (F) to uranium (U) in sequential mode</li><li>Fast analysis of solids, liquids and loose powders with superior spectral resolution</li><li>No water cooling or gas supply required (depending on configuration)</li><li>Closely coupled optics for increased intensity (50% higher than conventional geometry)</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_ARL_OPTIM_X_WDXRF_Spectrometer_b264a3a303.jpg" alt="Thermo Scientific™ ARL™ OPTIM'X WDXRF Spectrometer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_ARL_OPTIM_X_WDXRF_Spectrometer_b264a3a303.jpg 94w," sizes="100vw" width="650" height="1077"><h3>Features of the Fixed Circular Magazine</h3><ul><li>Eight positions for storing reference standards</li><li>Allows occasional manual introduction of prepared samples</li><li>One additional position dedicated to filing production samples following analysis</li><li>The complete system can also be supplied within a Thermo Scientific™ ARL™ QuantoShelter container for in situ analysis closer to the process.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_ARL_SMS_Omega_XRF_Instrument_87d53e64fb.jpg" alt="Thermo Scientific™ ARL™ SMS-Omega XRF Instrument" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_ARL_SMS_Omega_XRF_Instrument_87d53e64fb.jpg 216w," sizes="100vw" width="650" height="471">

Thermo Scientific ARL SMS-2300 Robotics-Based Automation for OES or XRF

Thermo Scientific™ ARL™ SMS-2300 enables fast, reproducible, and unattended OES/XRF analysis to optimize steel production and meet the strictest quality standards.

<h4>Meet stringent steel specifications while increasing efficiency and lowering production costs.</h4>The Thermo Scientific™ ARL™ SMS-2300 Robotics-Based Automation for OES or XRF is an automated quality control solution to optimize your steel production operation. With the high-performance ARL SMS-2300 system, even complex samples are prepared and analyzed under reproducible conditions without operator intervention, eliminating human variables and subjective factors. 👉 Result: Increased output, reliable results, and reduced costs.<h3>🔧 ARL SMS-2300 Automation for OES or XRF</h3>Provides ultimate power and flexibility for automatic, unattended 24/7 operation of:<ul><li>ARL™ 4460</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1213">ARL™ iSpark</a> / <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1977">iSpark Plus OES</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products?instrumentationItems=100&amp;manufacturerItems=3&amp;search=9900">ARL™ 9900 XRF</a></li></ul><h3>✅ Main Features</h3><ul><li>Easy integration into fully automatic laboratories</li><li>Installed in ARL QuantoShelter, close to production process</li><li>Parallel tasking:<ul><li>Sample preparation</li><li>Sample introduction</li><li>Analysis</li><li>Instrument stand cleaning performed in hidden time</li></ul></li><li>High throughput with:<ul><li>Automatic sample preparation</li><li>Haas Mini Mill + ARL™ PrepControl™ + EasyPrep™ software</li></ul></li><li>Direct access to Haas Mini Mill for faster ferrous sample processing</li><li>Factory-configured and customized</li><li>Compact chassis, simple installation, and integrated electronics</li><li>High reliability, rapid ROI, and fast result availability</li><li>Frees lab personnel from routine tasks</li><li>ISO 9001 compliant manufacturing and maintenance</li></ul><h3>🚀 Advanced Technology</h3><ul><li>Fanuc industrial robot</li><li>OXSAS analytical software</li></ul>

Thermo Scientific ARL SMS-3300 Automation for Single or Twin OES or XRF

Thermo Scientific™ ARL SMS-3300 enables fully automated operation of one or two OES or XRF spectrometers, enhancing lab efficiency in industrial environments.

Drive process control laboratory efficiencies in the metals, mining and cement industries with the Thermo Scientific™ ARL™ SMS-3300 Automation for Single or Twin OES or XRF, a complete laboratory workflow automation solution. The automation of single or multiple spectrometers and preparation machines with the ARL SMS-3300 system offers:👉 Reduced sample analysis cost, 👉 Increased sample throughput, 👉 Better reproducibility, and 👉 Higher quality resultsfor users requiring more comprehensive and integrated automation solutions in the metals, mining and cement industries.<h3>🔧 ARL SMS-3300 – Automation for Single or Twin OES or XRF</h3>Provides ultimate power and flexibility for automatic, unattended, 24/7 operation of:<ul><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1213">Thermo Scientific™ ARL™ iSpark </a>/<a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1977"> iSpark Plus </a>(Optical Emission Spectrometers)</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products?instrumentationItems=100&amp;manufacturerItems=3&amp;search=9900">Thermo Scientific™ ARL™ 9900</a> (X-ray Fluorescence Spectrometer)</li></ul><h3>✅ Main Features</h3><ul><li>Designed for easy integration into fully automatic laboratories</li><li>Can be mounted in Thermo Scientific ARL QuantoShelter, close to the production process</li><li>Parallel task execution:<ul><li>Sample preparation</li><li>Sample introduction</li><li>Analysis</li><li>Instrument stand cleaning performed in hidden time by the spectrometer, independently of the robot</li></ul></li><li>Direct access to milling machine for reduced processing times of ferrous samples</li><li>Higher throughput with:<ul><li>Automatic sample preparation</li><li>ARL™ PrepControl™ system + ARL™ EasyPrep™ software</li></ul></li><li>Factory configured and customized</li><li>Compact chassis and simple installation</li><li>Integrated electronics</li><li>Improved analysis reliability and quality</li><li>Very rapid payback</li><li>Faster result availability</li><li>Qualified lab personnel freed from routine tasks</li><li>Manufactured and maintained according to ISO 9001-2000 procedures</li></ul><h3>🚀 Advanced Technology</h3><ul><li>State-of-the-art Fanuc industrial robot</li><li>OXSAS analytical software</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_ARL_SMS_3300_Automation_for_Single_or_Twin_OES_or_XRF_fadcbb621a.jpg" alt="Thermo Scientific™ ARL SMS-3300 Automation for Single or Twin OES or XRF" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_ARL_SMS_3300_Automation_for_Single_or_Twin_OES_or_XRF_fadcbb621a.jpg 245w," sizes="100vw" width="650" height="366">

Thermo Scientific ARL SMS-3500 Automation for Twin OES or XRF

The ARL SMS-3500 automates two OES or XRF spectrometers with smart sample flow management for fast, efficient, and continuous production control.

Drive process control laboratory efficiencies in the metals and mining industries with the Thermo Scientific™ ARL™ SMS-3500 Automation for Twin OES or XRF, a complete laboratory workflow automation solution. Primary metals producers' laboratories typically run two fully duplicate and separate spectrometry lines to assure fast response times when several urgent samples must be processed simultaneously. 👉 The ARL SMS-3500 system is an affordable alternative.The automation of multiple spectrometers and preparation machines with the ARL SMS-3500 system offers:<ul><li>Reduced sample analysis cost</li><li>Increased sample throughput</li><li>Better reproducibility</li><li>Higher quality results</li></ul>for users requiring more comprehensive and integrated automation solutions in the metals and mining industries.The ARL SMS-3500 Automation for Twin OES or XRF simplifies sample handling by providing:<ul><li>a single introduction location for all samples</li><li>a magazine storage function to free the introduction 👉 This reduces response times, increases sample processing cadence, and improves the availability of automatic sample preparation in highly critical production control environments.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_ARL_SMS_3500_Automation_for_Twin_OES_or_XRF_2_0553f2880b.jpg" alt="Thermo Scientific™ ARL™ SMS-3500 Automation for Twin OES or XRF - 2.jpg" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_ARL_SMS_3500_Automation_for_Twin_OES_or_XRF_2_0553f2880b.jpg 217w," sizes="100vw" width="650" height="469"><h3>✅ Main Features</h3><ul><li>No need for time-consuming electro-mechanical transfer systems – the SMS-3500 robot moves samples between components within seconds</li><li>Simplified operation and reduced system complexity for easier maintenance and servicing</li><li>Single interface screen for all sample tracking and automation functions</li><li>Unified registration and introduction point for all production samples, with automated routing to the appropriate system components</li><li>Support for two sample preparation machines:<ul><li>Reduces response times</li><li>Increases processing cadence</li><li>Improves automatic sample preparation availability</li></ul></li><li>Operator workload is reduced – the system manages samples by priority and availability of resources<ul><li>Includes internal sample storage to free the introduction point immediately</li></ul></li><li>Each instrument can be used offline for manual tasks without interrupting automated operation</li><li>Uses the same analytical software for XRF and OES</li><li>Automation is based on proven ARL SMS software</li></ul><h3>🔧 Recommended for:</h3><ul><li>Iron and steel applications</li><li>High alloy, stainless steel, copper, brass, and bronze applications</li><li>Aluminum or fire assay applications</li></ul>

Thermo Scientific AnStat-330 Online Sampling and Elemental Analysis Station

The AnStat-330 provides real-time elemental analysis of slurries, improving metal recovery and eliminating delays and the need for sampling pumps.

The Thermo Scientific™ AnStat-330 Online Sampling and Elemental Analysis Station is a high availability, low head loss solution for:<ul><li>Metallurgical accounting</li><li>High-quality measurement of critical slurry streams in mineral processing plants</li></ul>It features an integrated analyzer and a full-flow, multistage, representative sampler, delivering:<ul><li>Accurate real-time assays</li><li>Enhanced control of flotation circuits, including:<ul><li>Flotation plant feed</li><li>Roughing and cleaning circuits</li><li>Final concentrates and tailings</li></ul></li></ul><h3>🔧 Key Advantages</h3><ul><li>Eliminates:<ul><li>Costly and unreliable sample transport systems</li><li>Measurement lag from cycle time delays and cross-contamination common with centralized analyzers</li></ul></li><li>Delivers:<ul><li>Reliable and rapid response to process upsets and feed fluctuations</li><li>Low head loss design, removing the need for sample pumps</li><li>Simplified flotation plant layout and installation</li></ul></li></ul><h3>⚙️ Operational Benefits</h3>Use the AnStat-330 to:<ul><li>Improve processing efficiency</li><li>Reduce life-of-mine OPEX for sampling and analysis</li><li>Lower energy consumption</li><li>Optimize reagent use</li><li>Improve metal recovery</li><li>Maximize Net Smelter Return (NSR)</li></ul><h3>📌 Key Features</h3><ul><li>Real-time elemental analysis and composite sampling for effective process control and metallurgical accounting</li><li>Very low head loss for simplified plant design – no sample pumps required</li><li>Advanced EDXRF detector (Ca to U), with Peltier cooling for stable, reliable operation in harsh environments</li><li>Versatile, compact system – easy to integrate into existing plants</li><li>24/7 high availability for both analysis and sampling</li><li>Multistage proportional sampling, including final-stage hardened cross-cut sampler for representative samples</li><li>Low maintenance – only moving parts in final-stage cross-cut sampler</li><li>Final-stage sampler identical for both AnStat-330 and SamStat-30 across full flow range</li></ul><h3>🧩 Optional Features</h3><ul><li>Pebble screen: Removes oversized particles from cyclone overflow; acts as backup to upstream primary screen</li><li>Outlet distributor: Splits slurry flow into 2+ streams with defined volume ratios</li><li>Upwelling/reverse flow sampling zone: Ideal for particle size analysis (with PSM-500)</li><li>Vacuum filter: For use with composite sampling</li></ul>

Thermo Scientific TriPlus™ RSH SMART Autosampler

Extend automation, performance, and versatility for GC and GC/MS applications, while ensuring easier and safer operations through SMART consumables ID recognition and usage tracking.

<div><div id="product-description">Expand automated sampling capabilities beyond liquid, headspace, and solid phase microextraction (SPME) injections. The advanced, built-in robotics of the Thermo Scientific™ TriPlus™ RSH SMART Autosampler deliver exceptional precision, sample handling flexibility, and reliable unattended operation. Enabling SMART consumables tracking, it offers easier, safer and traceable operations. Accurate and repeatable sample preparation and injection are essential to achieving the highest quality GC/GC-MS results. Enhance data quality and laboratory efficiency by automating your entire sample handling workflow.</div><div>The TriPlus RSH SMART Autosampler brings together technological innovations that further expand automation, performance and versatility for GC and GC-MS applications, while ensuring easier and safer operations through SMART consumables ID recognition and usage tracking. Automated high-precision sample handling eliminates the manual labor and downtime typically required for tasks as standard/sample dilutions, internal standard addition and derivatization.<h3>SMART Consumables</h3>Validated SMART consumables are equipped with unique SMART chip storing parameters, ranges and usage history; enabling full traceability of sample preparation down to the syringe.<h3>Automatic Syringe Changeout</h3>Automatic Tool Change (ATC) capability automates the use of different syringes for sample preparation steps or different injection techniques within the sequence.<h3>Vial Bottom Sensing Expands Application Range</h3>Precise detection of vial bottoms enables the autosampler to accurately withdraw from sample amounts as little as 5 μL, enhancing data quality of sample-limited applications.<h3>Flexible liquid sample handling</h3>Optimized liquid injection modes and customizable syringe filling techniques, support a wide range of sample types and full GC inlet compatibility.<h3>Automated headspace injection for volatile analysis</h3>High temperature gas-tight syringe allows direct headspace injection into the GC inlet for increased injection volume flexibility. Sample vial capacity of up to 300x 10 mL/20 mL vials and sample incubation overlapping, facilitate long unattended operation.<h3>Automated, solvent-free SPME</h3>Precise control of all steps—fiber preconditioning, adsorption and desorption, as well as fiber washes—delivers maximum performance for SPME applications. Boost productivity with the optimized SPME Arrow design. It offers optimized fiber geometry to achieve 10x superior sensitivity compared to classical SPME, 2x faster extraction time and superior robustness.<h3>Automated Sample Preparation</h3>The Triplus RSH SMART Autosampler combines highly versatile sample injection capability with automated sample preparation procedures, eliminating typical GC-MS workflow bottlenecks. Daily operations ranging from sample/standard dilution to more complex derivatization protocols, can be fully automated and easily programmed with the Sampling Workflow Editor Software.<h3>Extend productivity with the optional 1D barcode reader</h3>The optional 1D barcode reader eliminates the need to log and track sample information manually; enabling you to streamline internal operations, save time, increase efficiency, and reduce errors.<h3>Specifications</h3><ul><li>Type: TriPlus RSH SMART Standard Liquid, Regular Rail</li><li>Sample Capacity: 4608 Well Plates, 840 x 0.5 mL or 0.7 mL Vials, 648 x 2 mL Sample Vials, 240 x 10 mL or 20 mL Vials</li><li>Injection Mode: 8 Fully Customizable Method-Specific Injection Mode Presets</li><li>Injection Speed: Selectable from 0.1 μL/s to 2000 μL/s</li><li>Injection Volume: 0.1 to 10,000 μL</li><li>Description: TriPlus RSH SMART configured for liquid injection on regular X-axis length. Only for manual tool change. Complete with liquid syringe tool, 2 x 10 μL SMART syringes, standard washing station and a single tray holder with 3 trays for 2 mL vials. Expandible to other sampling techniques (Headspace, SPME, SPME Arrow, ITEX-DHS) and with sample preparation tools.</li><li>Tool Exchange: Only for manual tool exchange. No tool park station.</li><li>For Use With (Equipment): Compatible with Smart syringes/fibers only.</li></ul></div></div>

Thermo Scientific Dionex AutoTrace 280 Solid-Phase Extraction Instrument

Extract analytes of interest from large volume aqueous samples easily and efficiently with the Thermo Scientific™ Dionex™ AutoTrace™ 280 Solid-Phase Extraction (SPE) Instrument.

Extract analytes of interest from large volume aqueous samples easily and efficiently with the Thermo Scientific™ Dionex™ AutoTrace™ 280 Solid-Phase Extraction (SPE) Instrument.&nbsp;The AutoTrace 280 automates all four steps of SPE (conditioning, loading, rinsing, and eluting), reducing solvent consumption and improving recovery and reproducibility. Boost productivity and reduce cost of analysis by simultaneously processing up to six samples in 2-3 hours with only 15 minutes of operator involvement. The AutoTrace 280 meets requirements in US EPA methods including the 500 and 600 series.<h5>Improved reliability and recovery</h5><ul><li>Automated SPE minimizes operator intervention</li><li>Positive pressure loading and elution of samples and solvents provide constant flow for improved analytical precision</li></ul><h5>Flexibility in operation</h5><ul><li>Loads sample volumes from 20 mL to 4 L</li><li>Compatible with 1, 3, and 6 mL cartridges and with 47 mm SPE disks</li><li>Automatically conditions, rinses, and elutes SPE cartridges with a choice of five solvents</li><li>Offers a choice of six different collection vial racks</li></ul><h5>Improved laboratory safety</h5><ul><li>Minimal sample handling reduces operator exposure to hazardous chemicals</li><li>No hood required</li></ul><h5>Enhanced laboratory productivity and reduced costs</h5><ul><li>Unattended operation</li><li>Batch processing of up to 6 samples</li><li>Reduced solvent usage</li><li>Segregates aqueous and solvent waste using separate waste lines for efficient, cost-effective waste handling</li></ul><h5>Supports a range of matrices and applications</h5><ul><li>Ability to process samples containing suspended solids</li><li>Meets requirements for solid-phase extraction for U.S. EPA methods including 500 and 600 series</li></ul><h5>Recommended use</h5><ul><li>Analyze prepared samples with Thermo Scientific LC or GC systems for a fully integrated workflow</li></ul><h4>Specifications</h4><ul><li>Instrument Type: Automated Solid Phase Extraction (SPE) System</li><li>Application: For use with 47 mm SPE disks</li><li>Model Description: AutoTrace 280 SPE System</li></ul><h5>Performance &amp; Operating Details</h5><ul><li>Disk Compatibility: Designed for 47 mm SPE disks</li><li>Pressure Range:<ul><li>Output: 0 to 30 psi (0 to 1.4 bar)</li><li>Input: Up to 100 psi (6.9 bar) maximum</li></ul></li><li>Voltage: 100–240 V ±10%</li><li>Frequency: 47–63 Hz</li></ul><h5>Physical Specifications</h5><ul><li>Dimensions (D × W × H): 57 × 63.5 × 69 cm</li><li>Unit Size: Each</li></ul>

Thermo Scientific EXTREVA ASE Accelerated Solvent Extractor

Achieve true walkaway sample-to-vial sample preparation with the Thermo Scientific™ EXTREVA™ ASE™ Accelerated Solvent Extractor. 

Achieve true walkaway sample-to-vial sample preparation with the Thermo Scientific™ EXTREVA™ ASE™ Accelerated Solvent Extractor. Without any intervention, perform sample extraction, in-cell cleanup and evaporation—all in one seamless operation—reducing manual labor from hours to minutes and enabling you to focus on other lab priorities while using up to 50% less solvent than other sample preparation techniques.Accelerate your journey from sample to vial<h5>The EXTREVA ASE Accelerated Solvent Extractor offers:</h5><ul><li>All-in-one sample preparation. The EXTREVA ASE system automatically extracts and concentrates samples, eliminating the need to manually move sample extracts to another device for solvent evaporation.</li><li>A walk-away solution. The system minimizes hands-on sample preparation tasks, enabling staff to accomplish other tasks.</li><li>Parallel extraction. One EXTREVA ASE system can perform four parallel sample extractions, substantially increasing throughput.</li><li>Gas-assisted extraction. The dynamic gas-assisted extraction mode reduces solvent consumption to between 5 and 100 milliliters per sample in most cases.</li><li>Automation. Full automation improves recoveries and reproducibility while reducing training needs. Unlike humans, automated systems are ideal for performing the same tedious task repeatedly, and they don’t make mistakes.</li><li>Method flexibility and optimization. Up to six different solvents can be used, including wash solvents for cleaning between methods. Precise flow control optimizes methods.</li><li>Barcode-reading. The system tracks sample information and preparation parameters using a 2-D bar code reader to facilitate tracking and integrity. Data is recorded on the instrument or Thermo Scientific™ <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/76">Chromeleon™ Chromatography Data System (CDS) software</a>.</li></ul><h4>Specifications</h4><ul><li>Instrument Type: Automated Sample Preparation System</li><li>Application: Simultaneous sample extraction and concentration</li><li>Model Description: EXTREVA ASE Extraction and Evaporation System</li></ul><h5>Performance &amp; Capabilities</h5><ul><li>Extraction Temperature Range: 40–200 °C</li><li>Evaporation Temperature Range: 40–100 °C</li><li>Compatible Solvents: Wide range of organic and aqueous solvents</li><li>Pressure Capability: Up to 200 psi</li><li>Power Consumption: 2000 W</li><li>Frequency: 50/60 Hz</li></ul><h5>Sample &amp; Solvent Handling</h5><ul><li>Extraction Cells (stainless steel): 1, 5, 10, 22, 34, 66, 100 mL</li><li>Extraction Cell Tray: 16-position with 1 rinse</li><li>Collection Vials:<ul><li>60 mL and 100 mL evaporation vials</li><li>250 mL evaporation bottles</li><li>Direct concentrate to 2 mL sample vials with rinse capability</li></ul></li><li>Collection Vial Tray: 16-position tray insert for 60 mL vials and 250 mL bottles; includes 4 rinse positions</li></ul><h5>Utilities &amp; Requirements</h5><ul><li>Pneumatic Requirements:<ul><li>Air: 130–140 psi</li><li>Nitrogen: 350–450 psi</li></ul></li></ul><h5>Physical Specifications</h5><ul><li>Dimensions (D × W × H): 65.2 × 100 × 88.6 cm (25.6 × 39.4 × 34.8 in.)</li><li>Weight: 160 kg (353 lb)</li><li>Unit Size: Each</li></ul>

Thermo Scientific™ Dionex™ ASE™ 350 Accelerated Solvent Extractor

Save time, reduce solvent consumption, and boost productivity with Thermo Scientific™ Dionex™ ASE™ 350 Accelerated Solvent Extractor.

<div>Automate extraction, filtration and clean up of compounds from solid and semisolid samples in minutes using the automated Thermo Scientific™ Dionex™ ASE™ 350 Accelerated Solvent Extractor. This system accommodates sample sizes of 1-100g, allows unattended extraction of up to 24 samples and uses 50 to 90% less solvent compared to other methods.&nbsp;The chemically inert pathway supports acid and alkaline sample matrices and solvents. Flexible, easy-to-operate and cost-effective, the Dionex ASE 350 is ideally suited for high-throughput laboratories and for a wide variety of applications.<div><h4>Rapid and efficient extractions</h4><ul><li>Elevated temperature (up to 200°C) and pressure (1500psi) reduce extraction times and solvent consumption</li><li>Fast pump (70mL/min.) enables fast extractions (typically 12-20 minutes)</li><li>Specialized oven design ensures precise temperature control for excellent reproducibility</li><li>Integrated solvent controller allows mixing and delivery of up to three solvents</li><li>The Thermo Scientific™ SmartRun™ System ensures cell size and collection vessel size are matched for an optimal extraction</li></ul><h4>Enhanced flexibility to support multiple applications</h4><ul><li>System accommodates 1, 5, 10, 22, 34, 66 and 100mL cell sizes</li><li>pH-hardened pathway with Thermo Scientific™ Dionium™ components and cell enables compatibility with acid or alkaline pretreated matrices</li></ul><h4>Dramatically reduced solvent consumption</h4><ul><li>Requires less than 50mL solvent for a 20g sample</li><li>Includes solvent saver mode for further solvent savings</li></ul><h4>Enhanced laboratory productivity</h4><ul><li>System holds up to 24 samples for unattended operation</li><li>Flow-through technology allows in-line filtration and in-cell cleanup</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Dionex_ASE_350_system_2_9426ff3f9a/Thermo-Scientific-Dionex-ASE-350-system_2.jpg" alt="Thermo Scientific™ Dionex™ ASE™ 350 Accelerated Solvent Extractor" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Dionex_ASE_350_system_2_9426ff3f9a/thumbnail_Thermo-Scientific-Dionex-ASE-350-system_2.jpg 114w," sizes="100vw" width="579" height="792"><h3>🛠️ Specifications</h3><ul><li>Collection Vial Tray: 26-position tray insert for 60 mL vials; 19-position tray insert for 250 mL bottles</li><li>Depth (English): 27.3 in.</li><li>Depth (Metric): 69.3 cm</li><li>Description: Extractor Only</li><li>Extraction Fluids: Compatible with a wide range of organic and aqueous solvents</li><li>Fluid Sensors: IR</li><li>Frequency: 50/60 Hz</li><li>Height (English): 24.3 in.</li><li>Height (Metric): 61.7 cm</li><li>Pneumatic Requirements: Air at 400–827 kPa (60–120 psi); N2 (at 1034 ×–1340 kPa (150–200 psi))</li><li>Power Consumption: 500 Max VA</li><li>Pressure: 10 MPa (1500 psi)</li><li>Pump Flow: 70 mL/min</li><li>Temperature Control: Up to 200 °C</li><li>Weight (English): 140 lb.</li><li>Weight (Metric): 65 kg</li><li>Width (English): 26.5 in.</li><li>Width (Metric): 67.3 cm</li><li>Collection Vials: 60, 250 mL</li><li>Dimensions (D x W x H): 69.3 x 67.3 x 61.7 cm</li><li>Extraction Cell Tray: 24 Cell, 2 Rinse</li><li>Extraction Cells: 1, 5, 10, 22, 34, 66, 100 mL</li><li>For Use With (Equipment): Dionex ASE 350</li><li>Type: Dionex ASE 350 System</li><li>Unit Size: Each</li></ul></div></div>

Products from category Sample preparation automation distributed by Thermo Fisher Scientific (EMEA) - page 1

Related content

The Importance of Detecting Per- and Polyfluoroalkyl Substances (PFAS)

Interview: What Drew Postdoc Taťána Gazárková to Analytical Chemistry

News from LabRulezICPMS Library - Week 36, 2026