The Organomation H Series Hydrogen Generator is a modular hydrogen generation system designed for GC, GC-MS (GC-MSD), and FAST GC applications. It is available in three models with flow rates of 200, 400, and 600 mL/min, delivering ultra-high purity hydrogen up to 99.9999%.
The system uses HT PEM electrolytic cell technology, producing hydrogen on demand, minimizing internal gas storage and enhancing safety.
A comprehensive safety system includes acoustic alarms, display messages, and automatic shutdown in case of gas leaks, with automatic switching to inert gas if hydrogen production stops.
The generator features a touchscreen CPU, supports CAN-BUS and LAN connectivity, and allows real-time monitoring, diagnostics, and maintenance management. Up to four units can be connected in parallel for scalable performance.
Key Features
- Three models: 200 / 400 / 600 mL/min
- Hydrogen purity up to 99.9999% (UHP)
- HT PEM electrolytic cell technology
- On-demand hydrogen production
- Advanced safety system with alarms and auto shutdown
- Automatic switch to inert gas
- Removable water tank for easy maintenance
- Low maintenance and low operating cost
- Parallel connection of up to 4 units
- Touchscreen CPU with CAN-BUS and LAN
- Full monitoring of system status and alarms
Available Models
H Series 200
- Flow rate: 200 mL/min ±10%
- Power consumption: 110 W
H Series 400
- Flow rate: 400 mL/min ±10%
- Power consumption: 180 W
H Series 600
- Flow rate: 600 mL/min ±10%
- Power consumption: 250 W
Standard Features
- HT PEM electrolytic cell
- Touchscreen CPU
- LAN connectivity
- CAN-BUS communication
- Removable water tank
- Automatic water refill pump
- Safety system with alarms and auto shutdown
- Automatic inert gas switching
- Modular stackable configuration
Technical Specifications
General
- Technology: HT PEM electrolytic cell
- Purity: 99.9999%
- Oxygen: < 1 ppm
- Dew point: < -70°C
- Output pressure: 2–8 bar (30–116 psi)
- Max altitude: 2000 m
- Noise: < 50 dBA
- Protection class: IP20
Electrical
- 115/230 V, 50–60 Hz
- H200: 110 W
- H400: 180 W
- H600: 250 W
Operating Conditions
- Temperature: 5–35 °C
- Humidity: max 90% non-condensing
Water Requirements
- Minimum resistivity: >1 MΩ·cm (ASTM II)
- Recommended: <10 MΩ·cm (ASTM I)
Dimensions & Weight
- Dimensions: 47 × 38 × 53 cm
- Weight: 30 kg
Connections
- Hydrogen output: G 1/8" female (AISI 316)
- Exhaust: 4 mm quick connector
- Water input: 1/4" connection
Warranty
- 2 years
Accessories
- Water demineralizer
- Maintenance kit (9,000 / 18,000 hours)
- Water refill pump
