Analysis of Standard Sample by Drug Imaging

Technical notes | 2017 | ShimadzuInstrumentation
MALDI, MS Imaging, LC/TOF, LC/MS, LC/MS/MS, LC/IT
Industries
Pharma & Biopharma
Manufacturer
Shimadzu

Importance of Drug Imaging



Drug imaging using atmospheric‐pressure MALDI mass spectrometry offers a label-free way to visualize drug distribution and metabolism in biological tissues. This approach addresses limitations of conventional methods, such as isotope labeling or LC-MS/MS, by enabling direct localization of parent drugs and metabolites without the need for fluorescent or radioactive tags. High sensitivity and spatial resolution make MALDI-MS imaging attractive for drug delivery system development, safety evaluation, and semi-quantitative pharmacokinetic studies.

Study Objectives and Overview



This work outlines a workflow to optimize and apply dried-droplet analysis on stainless steel plates, followed by mass spectrometry imaging of tissue sections. Key goals included:
  • Selecting an optimal MALDI matrix for ionizing paclitaxel (PTX).
  • Determining detection sensitivity limits under controlled droplet conditions.
  • Establishing MS/MS methods to distinguish drug signals from endogenous background.
  • Applying the optimized protocol to image PTX in mouse tumor sections over time.

Methodology and Instrumentation



Sample preparation and analysis were divided into two phases:
  • Dried-Droplet Analysis on Stainless Steel:
    • Stainless steel plates were etched into 18×6 wells and reused.
    • Paclitaxel standards (100 fmol to 100 pmol per spot) were mixed with matrices DHB, CHCA, and 9-AA in ethanol.
    • Droplets were air-dried and measured at 30×30 laser points per spot.
    • DHB yielded the best ionization efficiency for [M+K]+ (m/z 892.3).
  • MS/MS Confirmation:
    • Potassium adducts of PTX were fragmented in the iMScope TRIO. A fragment at m/z 607.19 was selected to avoid interference from tissue peaks.
    • Comparison between standard and tissue MS/MS spectra confirmed fragment identity.
  • Tissue Section Imaging:
    • Frozen mouse tumor tissues were cryosectioned at 10 µm with 2 % CMC mountant to avoid OCT artifacts.
    • Sections were thaw-mounted on conductive ITO slides and stored at –80 °C.
    • Optical images were captured at 40× magnification prior to matrix application.

Used Instrumentation



  • iMScope TRIO imaging mass microscope (Shimadzu)
  • iMLayer automatic MALDI matrix vapor deposition system (optional)
  • Cryostat microtome for tissue sectioning
  • Etched stainless steel target plates
  • ITO conductive microscope slides

Main Results and Discussion



In dried-droplet tests, DHB matrix produced the highest signal for PTX [M+K]+ at m/z 892.3. Sensitivity studies showed clear detection down to approximately 1 pmol per spot. MS/MS imaging of tissue sections at 30 minutes post-injection (50 mg/kg PTX) revealed drug distribution throughout the tumor, with both precursor and fragment ions displaying consistent spatial patterns. Control sections without drug confirmed specificity. The use of MS/MS reduced endogenous background and improved image clarity.

Benefits and Practical Applications



  • Label-free visualization of drug and metabolite localization in tissues.
  • Simultaneous detection of multiple metabolites without isotopic labels.
  • Non-destructive analysis preserving tissue morphology for post-staining.
  • Semi-quantitative comparisons of signal intensity over time or between treatment groups.

Future Trends and Applications



Advances in matrix development and deposition techniques may further enhance sensitivity and spatial resolution. Combining MALDI imaging with quantitative approaches or orthogonal imaging modalities (e.g., optical, MRI) could yield deeper insights into drug pharmacokinetics. Automated sample handling, improved data analysis pipelines, and integration with machine learning are expected to accelerate drug discovery and safety assessments.

Conclusion



Atmospheric‐pressure MALDI-MS imaging using dried-droplet matrix optimization on stainless steel followed by MS/MS imaging of tissue sections provides a robust, label-free method for mapping drug distribution. Careful matrix selection, sensitivity verification, and rigorous MS/MS confirmation ensure reliable detection of target compounds in complex biological matrices.

Reference



  1. Matsumura Y., Yasunaga M. et al. Scientific Reports 3, 3050 (2013).
  2. Shimadzu Review 70, 99–108 (2014).
  3. Yamazaki T. et al. Journal of Mass Spectrometry 48, 1285–1290 (2013).

Content was automatically generated from an orignal PDF document using AI and may contain inaccuracies.

Downloadable PDF for viewing
 

Similar PDF

A Study of Toxicity Evaluation Using the iMScope TRIO - Analysis of Localization of Amiodarone in Rat Lungs
Analysis of Lipids in a NAFLD Model Mouse
Pharmacokinetic study based on atmospheric pressure MALDI-IT-TOF imaging mass microscope: A case of octreotide in mouse target tissues
High spatial-resolution MS imaging of longitudinal- and transverse- cross sections of drug-incorporated ha