Rapid LC-MS Analysis of mAb Charge Variant with a 20 mm Cation Exchange Column

Applications | 2024 | WatersInstrumentation
Consumables, LC columns, LC/MS, LC/HRMS, LC/MS/MS, LC/TOF
Industries
Pharma & Biopharma
Manufacturer
Waters

Importance of the topic


Cation exchange chromatography (CEX) is a key technique for separating monoclonal antibody charge variants, which influence therapeutic efficacy, stability, and safety.
High-throughput, MS-compatible methods accelerate development and quality control by reducing analysis time and resource consumption.

Objectives and study overview


This application note evaluates the performance of a short 2.1×20 mm BioResolve Premier SCX mAb column with 3 µm particles for rapid intact mAb charge variant analysis by LC-MS, comparing it to a conventional 2.1×100 mm column in terms of resolution, analysis speed, solvent usage, and data quality.

Methodology and instrumentation used


A pH gradient elution was performed using IonHance CX-MS pH concentrates in MS-compatible mobile phases.
  • Column: BioResolve Premier SCX mAb, 2.1×20 mm, 3 µm
  • Reference column: BioResolve SCX mAb, 2.1×100 mm, 3 µm
  • Mass spectrometer: Xevo G2-XS QTof
  • UV detection at 280 nm

Gradient conditions: 57–80% B over 1.2 min (20 mm) or 6 min (100 mm) at 0.3 mL/min and 30 °C.

Main results and discussion


The 20 mm column separated mAb charge variants approximately four times faster than the 100 mm column while reducing mobile phase and sample consumption fivefold.
Although theoretical resolution at half-height predicted a 2.2× advantage for the longer column, the practical resolution was 1.4× higher, with comparable MS deconvoluted spectra identifying main and C-terminal lysine-containing basic variants on both formats.

Benefits and practical applications of the method


  • High-throughput charge variant profiling with reduced solvent and sample requirements
  • Fast data acquisition suitable for process development and QC workflows
  • Maintained MS data quality despite shorter column geometry

Future trends and potential applications


Emerging column technologies and improved MS interfaces may further enhance separation speed and resolution.
Integration with automation and machine learning–driven data analysis can improve method robustness and streamline interpretation.

Conclusion


The 2 cm BioResolve Premier SCX mAb column offers a rapid, resource-efficient LC-MS approach for intact mAb charge variant analysis, delivering comparable data quality to longer columns with significant throughput advantages.

References


  1. Ippoliti S., Schmudlach A., Lauber M.A., Yu Y.Q. Online IEX-MS of mAb Charge Variants Using a BioResolve SCX mAb Column, IonHance CX-MS pH Concentrates, and BioAccord System. Waters Application Note, 720006672, 2019.
  2. Ippoliti S., Cornwell O., Reid L., Yu Y.Q., Harry E., Towers M. Comprehensive Biosimilar Comparability Assessment via Intact and Subunit RP-MS and IEX-UV-MS Using the Xevo G3 QTof System. Waters Application Note, 720007635, 2022.
  3. Waters Corporation. IonHance CX-MS pH Concentrates A and B. Care and Use Manual, 720006692, 2019.

Content was automatically generated from an orignal PDF document using AI and may contain inaccuracies.

Downloadable PDF for viewing
 

Similar PDF

Accelerating Charge Variant Analysis of Biotherapeutics with the BioAccord System
Rapid mAb Charge Variant Analysis with 20 mm Cation Exchange Columns
Optimizing LC-MS Separations of mAbs using a BioResolve SCX mAb Column and IonHance CX-MS pH Concentrates
Online IEX-MS of mAb Charge Variants Using a BioResolve SCX mAb Column, IonHance CX-MS pH Concentrates, and BioAccord System