Marketplace products from category Consumables - page 2

Specialized Gas Clean purifier for SCD detectors that removes moisture and sulfur contaminants (H₂S, COS, SO₂) from gas streams to ensure stable sulfur-selective GC detection.

Moisture purification cartridge for Agilent Gas Clean systems that removes water from GC gases (<0.1 ppm), enabling faster stabilization and protecting columns and stationary phases.

Oxygen purification filter for Agilent Gas Clean systems that removes trace oxygen (<50 ppb) from GC supply gases to prevent oxidation and protect chromatographic components.

Carrier gas purifier designed to remove oxygen, moisture, and hydrocarbons from GC and GC/MS carrier gases, improving system stability and protecting analytical components.

Universal-fit FID jet with 0.011 inch internal diameter designed for Agilent GC Flame Ionization Detectors to maintain stable flame operation and consistent analytical performance.

Universal-fit FID jet with 0.018 inch internal diameter designed for Agilent GC Flame Ionization Detectors to maintain stable flame conditions and consistent analytical performance.

Graphite/Vespel ferrule for 1/8 inch GC tubing providing reliable sealing and thermal stability up to 350 °C in Agilent gas chromatography systems.

Splitless GC inlet liner with single taper geometry and glass wool, designed to trap non-volatiles and improve analyte transfer and peak shape in Agilent GC systems.

Stainless steel LC capillary with 0.12 mm ID and pre-swaged SI/M4 fittings, designed for reliable fluid connections and low dead volume in Agilent InfinityLab analytical LC systems.

Manual crimper for 20 mm caps, designed to provide consistent and reliable vial sealing for routine laboratory use.