Our Library never stops expanding. What are the most recent contributions to LabRulezICPMS Library in the week of 14th September 2026? Check out new documents from the field of spectroscopy/spectrometry and related techniques!<blockquote>👉 <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library">SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT SPECTROSCOPY/SPECTROMETRY RELATED TECHNIQUES</a></blockquote><blockquote>👉 Need info about different analytical techniques? Peek into <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library">LabRulezLCMS</a> or <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library">LabRulezGCMS</a> libraries.</blockquote>This week we bring you technical note by Agilent Technologies, application notes by Metrohm and Thermo Fisher Scientific and poster by Shimadzu / AOAC!<h3>1. Agilent Technologies: Transitioning from the <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/icpms/library?mainauthorItems=10&amp;search=Cary+630">Agilent Cary 630 FTIR</a> to the <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/icpms/library?mainauthorItems=10&amp;search=Cary+635">Agilent Cary 635 FTIR Spectrometer</a></h3>Demonstrating methodology equivalence for pharmaceutical applications<ul><li>Technical note</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/pdf/te_cary_630_ftir_transition_cary_635_ftir_5994_9408en_agilent_a2ea2ce512.pdf">Full PDF for download</a>&nbsp;</li></ul>Fourier transform infrared (FTIR) spectroscopy is a powerful analytical tool used to analyze a wide variety of materials by interpreting their infrared (IR) wavenumber absorptions. Within pharmaceutical and biopharmaceutical industries, FTIR analysis is integral for material identification and quality assurance of pharmaceutical&nbsp;substances.&nbsp;In the pharmaceutical industry, the Agilent Cary 630 FTIR is used for the identification of drug products, incoming goods, and packaging materials, as specified in global pharmacopoeias, and provides quantitative information such as the concentration of components within pharmaceutical formulations.&nbsp;Agilent now presents the Cary 635 FTIR spectrometer—an ultracompact, easy-to-use, high-performing, portable FTIR system. With greater IR power, the Cary 635 FTIR features greater detection sensitivity and faster scanning times. With its predecessor's modular design, the Cary 635 FTIR can analyze the same samples with a newly enhanced performance quality and efficiency.&nbsp;For users in the pharmaceutical industry who have experience with the Cary 630 FTIR, this technical overview demonstrates the common methodologies and workflows between the Cary 635 FTIR and Cary 630 FTIR spectrometers for pharmaceutical purposes. It will compare the ability of the two instruments to measure and label IR spectra, identify relevant compounds such as active pharmaceutical ingredients (APIs), and quantify substances within commercial&nbsp;formulations.<h4>Instrumentation and software&nbsp;</h4>For comparison, all three application tests were conducted using the Cary 630 FTIR and Cary 635 FTIR spectrometers with ZnSe optics and equipped with a single-reflection diamond attenuated total reflectance (ATR) accessory. The specific method parameters are outlined within each corresponding application. Both the Cary 635 FTIR and Cary 630 FTIR use Agilent MicroLab software, which provides step-by-step instructions with supporting images to guide users through the entire analytical workflow. Both spectrometers follow the same methods and operational procedures from sample loading to data processing (Figure 1). Results are presented in an easy-to-understand, color-coded format with customizable limits, ensuring a rapid and intuitive data review.<h4>Conclusion&nbsp;</h4>The comparison presented here of both the Agilent Cary 635 FTIR and Cary 630 FTIR spectrometers demonstrated shared methodologies that produced consistent results across key applications within pharmacopoeia, including spectrum production, compound identification, and substance&nbsp;quantification. Featuring the same modularity, robustness, and ease of use as the Cary 630 FTIR, the Cary 635 FTIR also offers greater sensitivity and signal-to-noise ratio, resulting from an enhanced IR source intensity. Therefore, users operating in regulated environments can confidently upgrade to the Cary 635 FTIR with the understanding that the workflow from the Cary 630 FTIR is directly transferrable, and that their routine analyses will remain consistent and reliable.<h3>2. Metrohm: Coconut water analysis by NIRS</h3>Determination of Brix, salinity, conductivity, and pH with one instrument<ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/pdf/an_nir_145_download_05589da42d.pdf">Full PDF for download</a></li></ul>Fresh coconut water is the main edible part of the coconut (aside from the coconut meat) and has gained popularity as a health drink in recent years. Multiple factors influence the quality, such as harvesting time, growth location, and storage duration. This poses a challenge for industrial producers to achieve and maintain the desired product quality.&nbsp;Testing the properties of coconut water with standard laboratory methods can be challenging, since trained lab personnel are needed. In contrast, near-infrared spectroscopy (NIRS) is fast, chemical-free, and does not require sample preparation. This Application Note explains how NIRS is used for the multiparameter analysis of coconut water. The NIRS solution is easy to use and can be implemented either atline or in a quality control lab.<h4>EXPERIMENTAL EQUIPMENT&nbsp;</h4>An <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/icpms/library?mainauthorItems=220&amp;search=OMNIS+NIR">OMNIS NIR Analyzer </a>Liquid with a 1 mm flowthrough cell (Figure 1) was used to analyze 206 coconut samples from a commercial supplier. In this configuration, a peristaltic pump injects the sample into the flow-through cell, which is inserted into the cuvette holder. The cell is rinsed with water after each measurement.<h4>CONCLUSION</h4>This Application Note shows the feasibility of using NIR spectroscopy for the quality control of coconut water. The parameters Brix, conductivity, turbidity, pH value, and salinity can be monitored by NIRS in seconds without any sample preparation. The presented setup with a flow-through cell not only simplifies sample handling but also allows full automation when using an OMNIS Sample Robot. In addition to coconut water, the coconut fruit itself can also be analyzed using near-infrared spectroscopy.<h3>3. Shimadzu / AOAC: Analysis of Heavy Metals in Baby Food Using ICP-MS</h3><ul><li>Poster</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/pdf/aoac_2026_46_d9c14b32e0.pdf">Full PDF for download</a></li></ul>Babies are more vulnerable to the effects of toxic metals, and baby food therefore requires careful testing. US and EU regulations1)–3) set limits for toxic metals in baby food. This study analyzed five baby foods using the <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/icpms/library?mainauthorItems=1&amp;search=ICPMS-2040%2F2050">ICPMS-2040/2050</a> and evaluated spike recovery and long-term stability.<h4>Conclusion&nbsp;</h4>Elemental analysis of baby food was conducted using ICP-MS.&nbsp;We achieved detection limits that met stringent standards. The spike recovery tests provided good results for all samples with different matrices, confirming the validity of the analysis. Additionally, we analyzed 50 samples of infant formula with a high matrix approximately six hours and confirmed good stability.<h3>4. Thermo Fisher Scientific: Process Raman as a comprehensive solution for downstream buffer workflow</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/pdf/process_raman_as_comprehensive_solution_an1440_en_c8049b8ede.pdf">Full PDF for download</a></li></ul>Raman technology is rapidly gaining interest as a promising Process Analytical Technology (PAT) solution for real-time, non-invasive monitoring and control of downstream biopharma processes, especially for therapeutics like monoclonal antibodies (mAbs) and nucleic acids. Raman measurement, based on the vibration of molecular bonds, is highly specific for identification and quantification, even in complex or interfering matrices.&nbsp;As an in-line PAT tool, Raman spectroscopy offers direct and rapid measurement in aqueous phases without sample preparation. These features make it ideal for monitoring and controlling dynamic processes such as downstream processing.This study demonstrates a real-time methodology for accurately quantifying formulation excipients in the dynamic ultrafiltration/diafiltration (UF/DF) process using the <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/products/2233">Thermo Scientific™ MarqMetrix™ All-In-One Process Raman Analyzer</a> (Figure 1). In addition, this study also illustrates a case where process Raman was able to provide real-time information on buffer quality.<h4>Results&nbsp;</h4>The Partial Least Squares (PLS) models for L-histidine, L-arginine, and sucrose were initially tested using seven independent samples collected on three different process Raman analyzers. Data were mathematically processed to standardize spectra across instruments before applying the models. All the spectra were interpolated to have a common x-axis by equally spacing the 2048 pixels across 60 to 3250 cm-1 Raman shift, followed by relative y-axis standardization using the SRM fluorescence data as described in the NIST standardization protocol.² Figure&nbsp;3 shows the correlation plot of predicted versus reference values for L-histidine, L-arginine, and sucrose for the validation samples. A correlation coefficient of over 95% and a root means square error (RMSE) of less than 5% of the reference value for calibration, cross-validation, and prediction across three instruments demonstrate the reliability of process Raman to accurately predict the concentrations of these excipients, as well as easy model transferability.<h4>Conclusion</h4>This work, combined with our previous demonstrations of accurate in-line protein quantification during UF/DF processes,⁷, ⁸ clearly highlights the value of process Raman for downstream process monitoring. Raman spectroscopy allows for the simultaneous measurement of multiple critical process parameters (CPPs) with a single scan. These findings establish process Raman as a PAT tool with unparalleled benefits compared to other analytical methods.&nbsp;Simultaneous measurement of protein and excipient concentrations not only allows tighter process control but also opens opportunities for automating downstream processing.&nbsp;The ability of process Raman to provide real-time insights into buffer quality before its use in UF/DF runs offers substantial value by preventing batch failures. This capability enhances quality control, making Raman spectroscopy an essential tool for integration as an in-line sensor to improve downstream process monitoring, control, and automation.

News from LabRulezICPMS Library - Week 38, 2026

In the week from September 21, the following webinars await you in the field of atomic and molecular spectroscopy and spectrometry<blockquote><h4><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinars">👉 DETAILS AND REGISTRATION IN THE WEBINARS SECTION</a></h4>👉 Search and filter in the largest global database with over 6 000 GC, LC, MS and spectroscopy webinars.</blockquote><h5>1. Malvern Panalytical: Unlocking the Solid Form: XRD Solutions for Pharmaceutical Development and Manufacturing</h5><ul><li>Tu, 22.9.2026 10:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/webinar/6555">Registration</a></li></ul>Discover how X-ray diffraction (XRD) supports pharmaceutical development by characterizing polymorphism, crystal structure, crystallinity, and amorphous content from API development to QC.<h5>2. Bruker: XFlash® FlatQUAD 2L: Step Into The Future of SEM Elemental Analysis</h5><ul><li>Tu, 22.9.2026 10:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/webinar/6516">Registration</a></li></ul>Discover a new detector for SEM elemental analysis and learn how XFlash® FlatQUAD 2L can accelerate elemental analysis and imaging of sensitive samples.<h5>3. Malvern Panalytical: Future Days: Catalysts, What Will Define the Next Decade of Catalysis?</h5><ul><li>Tu, 22.9.2026 15:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/webinar/6553">Registration</a></li></ul>Explore the future of catalysis in hydrogen, CCUS, sustainable chemicals, and circular manufacturing, with expert insights on markets, standards, catalyst development, and advanced characterization.<h5>4. Bruker: Probing Structure, Ion Dynamics and Interfacial Reactivity in Energy-Storage Materials by Solid-State NMR</h5><ul><li>Tu, 22.9.2026 17:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/webinar/6515">Registration</a></li></ul>Learn how solid-state NMR reveals local structure, ion dynamics, and SEI interfacial behavior in energy-storage materials.<h5>5. Agilent Technologies: How to Perform Routine Quantification by FTIR: Tips &amp; Tricks Workshop</h5><ul><li>Tu, 22.9.2026 20:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/webinar/6442">Registration</a></li></ul>Master routine FTIR quantification in this hands-on workshop. Learn how to use MicroLab and MicroLab Quant software to measure standards, build calibration curves, and analyze real-world samples.<h5>6. Agilent Technologies: Learn How FTIR Can Help You with Contamination and Poor Product Quality</h5><ul><li>Tu, 22.9.2026 21:30 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/webinar/6441">Registration</a></li></ul>Discover how Agilent portable FTIR spectrometers enable fast, cost-effective contamination analysis with versatile sampling options to address product quality and equipment issues.<h5>7. Bruker: From Cleared Tissue to Quantitative 3D Insights: Integrated Bruker and Translucence Biosystems Workflows for Whole-Organ Imaging</h5><ul><li>We, 23.9.2026 17:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/webinar/6544">Registration</a></li></ul>Discover integrated Bruker and Translucence Biosystems workflows for 3D cleared tissue imaging and quantitative whole-organ light-sheet microscopy.<h5>8. SPECTRO Analytical Instruments: Automatic ICP-OES Analysis of Lubricating Oils Using SPECTRO GENESIS DSOI and ACAROS Automation</h5><ul><li>Th, 24.9.2026 10:30 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/webinar/6527">Registration</a></li></ul>Learn how automated ICP-OES analysis of lubricating oils can accelerate quality control and wear metal monitoring workflows using SPECTRO GENESIS DSOI and ACAROS automation.<h5>9. Agilent Technologies: Detection and Identification of Microplastics in Water and Other Matrices Using the Agilent Laser Infrared Spectroscopy Microscope</h5><ul><li>Th, 24.9.2026 11:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/webinar/6540">Registration</a></li></ul>Discover how the Agilent LDIR 8700 uses QCL-based infrared imaging to automate rapid microplastics analysis, data processing, and reporting while supporting current standards.<h5>10. Malvern Panalytical: From Sample to Reliable Result: How to Optimise Particle Concentration Measurements on the Zetasizer Advance</h5><ul><li>Th, 24.9.2026 14:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/webinar/6557">Registration</a></li></ul>Learn how to optimize particle concentration measurements with the Zetasizer Advance, from sample preparation and parameter selection to data-quality checks and improved repeatability.<h5>11. Wiley: Image, analyze, and fabricate at the nanoscale: Advances in SEM and FIB SEM for quantum materials research</h5><ul><li>Th, 24.9.2026 16:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/webinar/6524">Registration</a></li></ul>Explore advances in SEM and FIB-SEM for quantum materials research and learn how these technologies support 3D characterization, nanoscale analysis, and nanodevice fabrication.<h5>12. Mettler-Toledo: Thermal Analysis of Thermoset Materials</h5><ul><li>Th, 24.9.2026 16:00 CET</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/webinar/5777">Registration</a></li></ul>Explore the most important thermal properties of thermoset materials and learn how thermal analysis techniques can be used for their characterization.<h5>13. Agilent Technologies: Why fast, reliable trace-element analysis starts with triple-quad ICP-MS</h5><ul><li>Fr, 25.9.2026 17:30 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/webinar/6547">Registration</a></li></ul>Discover how the Agilent 9500 triple-quadrupole ICP-MS accelerates trace-element analysis and helps eliminate spectral interferences for reliable results.

Webinars LabRulezICPMS Week 39/2026

Combining elemental analysis and molecular techniques to characterize Ancient Egyptian mummification balms

Article

Webinars

Application

Scientific article

Science and research

Poster

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Mettler-Toledo

NenoVision

Agilent Technologies

Unchained Labs

Bruker

C&EN

Semiconducting materials are widely studied for use in solar energy and photocatalytic applications, among other areas of interest. For applications which involve the use of light, it is important to understand the energy needed to promote electrons from the valence band to the conduction band. This band gap energy can often be on par with the energy of photons in the UV-Visible region.
As such, UV-Visible spectroscopic techniques can be of use when assessing the band structure of semiconducting materials. Tauc plots, which are derived from the UV-Visible spectrum, provides the needed information to estimate the bandgap energy. In conjunction with computation and experimental results, the information gathered from the Tauc plot can aid in assessing the relative position of the valence and conduction bands.
In this webinar, the use of UV-Visible reflectance and transmittance measurements for band gap analysis will be discussed in detail. Additionally, considerations needed when analyzing semiconducting samples with these methods with be outlined.
<h5>Key Learning Objectives:</h5>
<ul>
<li>Gain knowledge about the theory and application of Tauc plot analyses for both reflectance and transmittance measurements.
</li>
<li>Learn what sample properties and environmental factors can influence the measured spectra of a semiconducting sample.
</li>
<li>Understand the considerations needed to perform accurate UV-Visible measurements of films or colloidal solutions.
</li>
</ul>
<h5>Who Should Attend:</h5>
<ul>
<li>Research Scientist</li>
<li>Materials Scientist/Engineer</li>
<li>Semiconductor Engineer</li>
</ul>
<blockquote>
Presenter: Jennifer Empey-Kohl, PhD (Applications Scientist, Thermo Fisher Scientific)
</blockquote>
<blockquote>
Presenter: Melissa O&#39;Meara (Forensic Science Consultant, C&amp;EN Media Group)
</blockquote>

C&EN: Analysis of Semiconductors through UV-Visible Techniques: Band Gap Studies

Analysis of Semiconductors through UV-Visible Techniques: Band Gap Studies

In this webinar, the use of UV-Visible reflectance and transmittance measurements for band gap analysis will be discussed in detail

Semiconductors: UV-Visible Techniques: Band Gap Studies

TBD ...
<blockquote>
Presenter: L. Craig Jones (ICP-MS Application Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Craig has been with Agilent for over 15 years as an ICP-MS applications scientist. He has been involved with multiple type of applications for ICP-MS, including environmental, pharmaceutical, semiconductor, geologic, and clinical analyses, to name a few. Previous to Agilent he worked in an environmental lab performing analysis and supervising both the inorganic and organic sections of the laboratory. In his spare time, Craig enjoys volunteering at the local marine science center, mountain biking, hiking, and relaxing at the beach. Craig obtained a Bachelor of Science degree in chemistry from Fort Lewis College in Durango, CO.
</blockquote>
<blockquote>
Presenter: Sima Singha, PhD (ICP-OES Application Scientist, Atomic Spectroscopy, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Sima has over fifteen years of hands on experience as an applications scientist in the field of atomic spectroscopy. Before joining Agilent in 2017, managed an agricultural chemistry laboratory for the analysis of water, soil, and plant tissue digests using ICP-OES for various EPA methods. She received a Ph.D. degree in Chemistry from the University of Illinois at Chicago with numerous peer-reviewed publications.
</blockquote>

Agilent Technologies: Where did “J” go? Looking back at USP/ICH Then and Now: An ICP-MS & ICP-OES Workshop

Where did “J” go? Looking back at USP/ICH Then and Now: An ICP-MS & ICP-OES Workshop

USP/ICH Then and Now: An ICP-MS & ICP-OES Workshop

The content of peptides and oligonucleotides in a sample (solid or liquid) is of importance in many aspects. For peptides traditional methods like Kjeldahl nitrogen determination, elementary analysis (EA), and amino acid analysis (AAA), requires breaking down the protein at harsh conditions to determine the protein content. For oligonucleotides one of the most widely used techniques for quantification is ultraviolet (UV) spectroscopy. This method requires a time-consuming sample preparation and, due to uncertainties in the extinction coefficient, the accuracy of the method is negatively affected
NMR spectroscopy is per definition quantitative and the application of quantitative NMR (qNMR) within small molecule analysis has been applied with success for decades. For larger molecules like peptides and oligonucleotides, the quantitative aspect of 1H-NMR suffers due to severe line broadening caused by higher order structural elements like dimers or oligomers under native conditions (e.g. peptides). The application of analysing peptides in non-native conditions (deuterated water:acetonitrile mixture) and recording the 1H-NMR data at elevated temperature will be presented. For oligonucleotides, the use of 1H-NMR is not feasible, and data will be presented with 31P as the selected nuclei for qNMR. Within the two modalities (peptides and oligonucleotides), the validation of the methods was performed using the recommendations from both USP and ICHQ2(R2) with respect to validation parameters (e.g. linearity) and platform applicability.
The content results obtained for both peptides and oligonucleotides will be compared to the content results obtained by the traditional methods.
<h5>Key Learning Points</h5>
<ul>
<li>Content determination of peptides and oligonucleotides by qNMR</li>
<li>Validation of the methods according to USP and ICHQ2(R2) guidelines</li>
<li>Considerations regarding platform applicability of the qNMR methods</li>
</ul>
<blockquote>
Presenter: Dr. Joan Malmstrøm (CMC Analytical Support, R&amp;D, Novo Nordisk A/S, Måløv, Denmark)
</blockquote>
<blockquote>
Joan Malmstrøm is a Principal Scientist at Novo Nordisk A/S holding a Ph.D. degree in organic chemistry from the University of Copenhagen and +25 years of experience with structural elucidation of organic molecules using nuclear magnetic resonance spectroscopy and mass spectrometry as analytical tools. The projects she has been involved in at Novo Nordisk A/S ranges from small molecules (API’s, raw materials/excipients, etc.) up to peptides, proteins, oligonucleotides, and large molecular weight polymers. During the past years one of her main activities has been the development of NMR analytical methods suitable for analysis of all kind of molecules included in drug development. The analytical methods are applied on all stages of the development pipeline and GMP validated when needed.
</blockquote>
<blockquote>
Presenter: Dr. Victor Beaumont (Strategic Market Development Specialist, Bruker BioSpin )
</blockquote>
<blockquote>
Victor has studied and applied NMR techniques throughout his undergraduate studies at the University at Buffalo (Dr. Thomas Szyperski) and PhD program at Yale University (Dr. Patrick Loria). He later joined Pfizer as an NMR specialist for biotherapeutic structure characterization moving then to project management of analytical laboratory automation. His passion is in improving the quality of life and working efficiencies of society by facilitating and contributing high-quality scientific innovation focused on state-of-the-art NMR characterization of novel therapeutic modalities. At Bruker, he is dedicated to working with scientists in understanding the challenges and needs of the industry to expand NMR applications and technology.
</blockquote>

Bruker: Validation and Implementation of qNMR as Platform Methods of Oligonucleotides and Peptides

Validation and Implementation of qNMR as Platform Methods of Oligonucleotides and Peptides

The application of analysing peptides in non-native conditions and recording the 1H-NMR data at elevated temperature will be presented.

qNMR as Platform Methods of Oligonucleotides and Peptides

Novel use of miniscopes to uncover migraine mechanisms
During this webinar, guest speaker Dr. Paolo Botta discusses his use of miniscope technology in freely behaving animals and functional ultrasound in anesthetized animals to investigate migraine pathophysiology. Learn how these novel technologies are used to explore and validate headache treatments.
Vasoactive neuropeptides, such as PACAP, are directly implicated in migraine pathophysiology. During the occurrence of migraine, they are released by trigeminocervical nerves which increase vasodilation of venous sinuses, meningeal, and pial arteries. Similarities between laboratory animals and humans in the anatomy and physiology of the cephalic nociceptive pathways have allowed scientists to improve our understanding of headache and migraine. Nevertheless, modeling the mechanisms underlying primary headache disorders like migraine has been challenging due to limitations in substantiating, translating, and back-translating the postulated hypotheses in humans. We overcome this main limitation by developing a functional preclinical model to validate headache treatment principles that closely resemble human studies. This model includes performing blood vessel imaging in freely moving rodents using miniature microscopes and in anesthetized animals using functional ultrasound.
<blockquote>
Presenter: Paolo Botta, Ph.D., (Principal Scientist, Lundbeck)
</blockquote>
<blockquote>
Paolo Botta, Ph.D., is a professional with 20 years of experience in life sciences, pharmacology, and neurobiology, combining academic and industrial expertise in various cultural settings and five countries. Paolo is a project leader of a cross-functional team of experts in various disciplines, including chemistry, regulatory, and clinical trials. He is also a mentor and supervisor of academics and technicians. His work regularly includes scouting suitable disease targets and utilizing scientific knowledge and skills in adopting translational biomarkers.
</blockquote>
<blockquote>
Presenter: Jonathan Zapata, Ph.D., (Translational Science Lead, Inscopix)
</blockquote>
<blockquote>
Dr. Jonathan Zapata embarked on his academic journey within the prestigious Marie Curie International Research and Training Program &quot;SyMBaD,&quot; supported by the European Union, where he pursued his doctoral studies. Under the mentorship of Dr. Maria Passafaro in Milan, Italy, Jonathan delved into the intricate mechanisms of genes implicated in intellectual disabilities. Following the completion of his PhD, Jonathan transitioned into a postdoctoral role under the guidance of Dr. Nathalie Rouach at Collège de France in Paris. Here, he seamlessly integrated advanced miniscope technologies from Inscopix with in vivo electrophysiology methods, probing neuroglial interactions in freely behaving mice. Since 2017, Jonathan has served as the Translational Science Lead at Inscopix Inc., now a proud member of the Bruker family. In this role, he coordinates &quot;in-house&quot; implementation of Inscopix technologies and research collaborations with pharmaceutical and Biotech companies focusing on neurodevelopmental and neuropsychiatric disorders.
</blockquote>

Bruker: A novel blood vessel imaging strategy for the treatment of headache disorders

A novel blood vessel imaging strategy for the treatment of headache disorders

Novel use of miniscopes to uncover migraine mechanisms.

Blood vessel imaging for the treatment of headache disorders

The webinar will be held at two different times to make it accessible to everyone across the globe. Choose the right session based on your time zone.
Session 1 - 9:00 CEST - <a href="https://events.teams.microsoft.com/event/1a0262aa-ed00-4cde-bcd2-ca339957e172@6f79bb79-6bdd-4e01-aa21-db2fe7dc83d6">REGISTER HERE</a>
Session 2 - 17:00 CEST - <a href="https://events.teams.microsoft.com/event/f16a64c9-b751-4277-b390-62f602a84ddb@6f79bb79-6bdd-4e01-aa21-db2fe7dc83d6">REGISTER HERE</a>
During this webinar Veronika Hegrová, the Application Manager at NenoVision will explain following topics:
<ul>
<li>Introduction to AFM-in-SEM and In-Situ Correlative Microscopy</li>
<li>Discover key Benefits and features of LiteScope</li>
<li>Open Hardware/Software Philosophy</li>
</ul>
What will you learn at the webinar?
<ul>
<li>Learn about the benefits and applications of AFM-in-SEM for in-situ correlative microscopy in materials science, life science, and other research fields.</li>
<li>Explore its advanced features, exceptional performance, and optimized workflows that enable in-situ correlative microscopy studies to reach new limits.</li>
<li>AFM-in-SEM Application Overview: Explore the possibilities and examples of in-situ correlative microscopy analysis for Material Science, Nanostructures, Semiconductors, and Life Sciences.</li>
</ul>
<blockquote>
Presenter: Veronika Hegrová (Head of Applications, NenoVision s.r.o.)
</blockquote>

NenoVision: AFM-in-SEM LiteScope: Redefining In-Situ Correlative Analyses

AFM-in-SEM LiteScope: Redefining In-Situ Correlative Analyses

Learn about the benefits and applications of AFM-in-SEM for in-situ correlative microscopy in materials science, life science, and other research fields.

AFM-in-SEM LiteScope: In-Situ Correlative Analyses

MALDI Imaging allows for interrogation of the spatial distribution of metabolites and lipids in tissue, as well as expanding targeted analysis to small molecules, glycans, and targeted proteins. Recent technical developments enable imaging for maximum biological information at robust (sub)cellular resolution. However, imaging entire tissue sections with high spatial resolution entails large number of pixels and requires extensive acquisition times. Thus, researchers are seeking for alternative high-speed chemical imaging techniques, which are conducted prior to MALDI Imaging to narrow down the regions of interest (ROIs) on large sample areas. Infrared Laser Imaging (ILIM) allows non-destructive, label free biochemical imaging of complete tissue sections within minutes – thus represents the ideal complementary analytical tool to make MALDI Imaging faster and smarter.
Webinar Overview
This webinar will introduce how breakthrough IR Laser Imaging performance is combined with best-in-class MALDI Imaging. Bruker’s new end-to-end workflow for IR Guided MALDI Imaging enhances sample throughput and provides increased analytical depth by offering maximized spatial resolution and collision cross section (CCS)-enabled label analysis for large-scale MALDI Imaging studies in biological and pharmaceutical research.
What to Expect:
Live presentation from Bruker’s experts to see the how tissue imaging has become faster than ever, the seamless integration of Infrared Laser Imaging (ILIM) into existing MALDI Imaging workflows and highlighting user stories, how IR Guided MALDI Imaging paves the way for deeper spatial multiomics of complex biological systems.
Who Should Attend:
<ul>
<li>MALDI Imaging users wanting to expand their workflows for increased sample throughput and analytical depth.</li>
<li>Scientists &amp; researchers interested in conducting multimodal imaging approaches for increased biological insight.</li>
<li>Anyone interested in learning more about Infrared Laser Imaging and MALDI Imaging capabilities.</li>
</ul>
<blockquote>
Presenter: Wojciech Kazmierski ( Country Manager, Bruker Optics, Poznan, Poland)
</blockquote>
<blockquote>
Presenter: Arne Behrens, Ph.D. (Application Scientist Imaging, Bruker Daltonics, Bremen, Germany)
</blockquote>
<blockquote>
Presenter: Domenic Dreisbach (Business Development Multimodal Imaging, Bruker Optics, Ettlingen, Germany)
</blockquote>

Bruker: Make MALDI Imaging faster and smarter with Infrared Laser Imaging

Make MALDI Imaging faster and smarter with Infrared Laser Imaging

IR Laser Imaging combined with best-in-class MALDI Imaging.

MALDI Imaging with Infrared Laser Imaging

Insights and Strategies for Maintaining High Water Quality
Event Program
<ul>
<li>Common misconceptions about impurities in pharmaceutical waters</li>
<li>Differences between chemical and microbial properties in WFI and PW</li>
<li>Recommended approaches for measuring different impurities</li>
<li>Insights on maintaining a healthy water loop</li>
</ul>
Enhancing Quality and Safety in Pharmaceutical Manufacturing
Without proper impurity control, pharmaceutical manufacturers risk compromising the safety and efficacy of their products. Microbial and organic impurities can enter water systems at various points in the manufacturing process and impact quality and safety.
Misunderstandings surrounding controlling impurities in pharma waters can lead to improper measurement and treatment approaches.
It is a common belief that chemical and microbiological properties in Water for Injection (WFI) and Purified Water (PW) are the same in pharmaceutical water systems. However, this is far from the truth. These properties react differently and are distributed unevenly in storage and distribution loops, which can have different effects on the health of the water system.
In this live roundtable discussion, we will dispel the most common myths about microbes and organics and controlling impurities in pharma waters. We will discuss the differences between chemical and microbiological properties in WFI and PW and recommend measurement approaches for each impurity. Additionally, we will cover how to maintain a healthy water loop to ensure high quality and safety in pharmaceutical manufacturing.
<blockquote>
Presenter: Maura Rury (Senior Product Manager, METTLER TOLEDO Thornton)
</blockquote>
<blockquote>
Maura manages METTLER TOLEDO&#39;s Total Organic Carbon (TOC) product line, along with related services and training. Her prior roles include marketing, product management, and technical applications at LGC and Thermo Fisher Scientific. She received her Ph.D. in Analytical Chemistry from the University of Massachusetts, Amherst.
</blockquote>
<blockquote>
Presenter: Anthony C. Bevilacqua (Principal Scientist, METTLER TOLEDO Thornton)
</blockquote>
<blockquote>
Anthony Bevilacqua earned a doctorate in Analytical/Physical Chemistry from Tufts University. Since 1994, he has led several areas of Research and Product Development that include: impact of CO2 on pure water, ultrapure water as a conductivity solution standard, development of digital sensors, and expansion of real-time analytical parameters (conductivity, TOC, microbial detection, ozone, sodium, and silica) for measurement/control of high purity water systems, including pharmaceutical water systems. Anthony was Chair of the inaugural USP Pharmaceutical Water Expert Committee from 2000-2005, and re-elected from 2005-2010. Anthony’s role continued in the 2010-2015 and 2015-2020 cycles for the USP Chemical Analysis Expert Committee, and he is currently serving on the current committee for 2020-2025.
</blockquote>
<blockquote>
Presenter: Areen Kalantari (Global Segment Manager, Pharma &amp; Life Sciences, METTLER TOLEDO Thornton)
</blockquote>
<blockquote>
Areen Kalantari holds a B.S. in Biological/Chemical Engineering and a Master of Business Administration (MBA) in International Business. He has experience in both biotechnology applications and pharmaceutical waters. Areen is a voting member of the American Society of Mechanical Engineers – Bioprocess Equipment (ASME-BPE) standards committee. He contributes to the Process Instrumentation subgroup to help implement standards for the bioprocessing and pharmaceutical industries, focusing on conductivity, pH, TOC, and other process technologies.
</blockquote>

Mettler-Toledo: Controlling Impurities in Pharma Waters

Controlling Impurities in Pharma Waters

Dispeling the most common myths about microbes and organics and controlling impurities in pharma waters.

What can be learned from preclinical experiments? And what cannot be learned? What do preclinical researchers need to know about clinical applications? What do clinicians need to learn from preclinical researchers? We will try to answer this! Don’t miss out on this opportunity to deepen your understanding of theranostics and bridge the gap between preclinical imaging and clinical applications. Register now!
Webinar Overview
The theranostic approach combines targeted therapy and diagnostic imaging. It represents a precision medicine approach relying on a specific targeted diagnostic test that helps to select patients for a specific targeted therapy. Molecular imaging in nuclear medicine combines imaging modalities like PET and SPECT with computed tomography (CT) or magnet resonance tomography to derive detailed information on disease. In the clinic, molecular imaging is mainly used for diagnosis, staging, monitoring response to therapy, and selecting patients. Diagnostic imaging can identify those patients who are positive or negative for a target out of a larger population. Subsequently, the patients who are positive can continue with targeted therapy, and patients who are negative can receive conventional therapy. Using preclinical imaging we can learn about targets, (the choice of) ligand, (potentially) which radioisotope to use best, and about tumor biology, which is important for effective theranostics.
What to expect
In this webinar, we’ll try to answer the following questions regarding theranostics and the journey from mice to men: What can and can‘t we learn from preclinical imaging in theranostics? What can be learned from preclinical experiments? And what cannot be learned? What do preclinical researchers need to know about clinical applications? What do clinicians need to learn from preclinical researchers? We will be talking about what makes a good radioligand, what makes a good theranostic target, and what are the opportunities and challenges in facilitating the go/no go decisions. Is the theranostic agent worth a clinical translation?
Who should attend?
This webinar is relevant to those interested in learning more about preclinical imaging and the bridge that can be formed between preclinical imaging and clinical applications. In addition, this webinar will be of interest to multiple profiles in the biomedical research community, especially those applying medical imaging techniques in their work. Clinicians, researchers, PhD students, postdocs, and laboratory technicians will find this webinar relevant.
<blockquote>
Presenter: Prof. Dr. Katharina Lückerath (Professor Preclinical Theranostics UK Essen)
</blockquote>
<blockquote>
Prof. Dr. Katharina Lückerath: Katharina is a biomedical scientist with a focus on experimental and translational theranostics. A priority of her research is to deliver new insights into tumor biology and its relationship and relevance to functional imaging and biomarker-driven treatments in nuclear medicine. She obtained her PhD at the Institute for Tumor Biology and Experimental Therapy (Georg-Speyer-Haus, Germany), served as head of the research group Experimental Oncology in Nuclear Medicine at the University of Würzurg (Germany), and of the pre-clinical Nuclear Medicine team at the University of California Los Angeles (USA; with Johannes Czernin), before transferring to University Hospital Essen in March 2021 to build and lead the Preclinical Theranostics team.
</blockquote>
<blockquote>
Presenter: Prof. Dr. Ken Hermann (Medical Director of the Clinic for Nuclear Medicine UK Essen)
</blockquote>
<blockquote>
Prof. Dr. Med. Ken Herrmann is an esteemed expert in nuclear medicine with an impressive career spanning over 19 years. He currently acts as Chair of the Department of Nuclear Medicine at the Universitätsklinikum Essen in Germany and chair of the EANM Oncology &amp; Theranostics Committee. He also serves as a Section Editor of the Journal of Nuclear Medicine. His earlier career found him as an Associate Professor in the Ahmanson Translational Imaging Division of the Department of Molecular and Medical Pharmacology at the University of California Los Angeles in addition to holding his position as Vice Chair of the Department of Nuclear Medicine at the Universitätsklinikum Würzburg. Ken has a Doctorate Degree from Humboldt Universität Berlin and completed his residency in Nuclear Medicine at Klinikum rechts der Isar, Technische Universität München in addition to his MBA, which he received from the Universität Zürich, Switzerland in 2011. His significant contributions include the first in human application of CXCR4-directed 177Lu-Pentixather and initiating the theranostic program at UCLA, leading to the FDA approval of 68Ga-PSMA-11.
</blockquote>

Bruker: Theranostics: From Mice to Men and Back, a MOLECUBES Webinar

Theranostics: From Mice to Men and Back, a MOLECUBES Webinar

Learn more about preclinical imaging and the bridge between preclinical imaging and clinical applications.

Theranostics: From Mice to Men and Back

Takeda has spent the last years significantly building up its high-throughput (HTE) and automation capabilities around the Unchained Labs’ family of tools. Nevertheless, while we are investing in a variety of different devices and approaches, our ultimate vision is to design and implement self-driving labs (SDLs) to carry out self-optimizing workflows. Process development and optimization frequently involves exploring wide parameter spaces, making these iterative algorithm-guided SDLs ideal for such optimizations.As such, we herein present our vision for fully self-optimizing HTE workflows, with the ultimate goal of creating SDLs with workflows optimized for a variety of general applications needed in synthetic molecule drug development. To illustrate this process, case studies will be presented, highlighting both their successes, as well as the limitations of our current hardware and software tools.<blockquote>Presenter: Adrian Ramirez Galilea (Senior Lab Automation Scientist)Presenter:&nbsp;Rick Sidler (Director of Field Automation Scientists Unchained Labs)Presenter:&nbsp;Kelly McSweeney (Contributing Editor, C&amp;EN Media Group)</blockquote>

C&EN: Leveraging HTE & Automation for Synthetic Molecule Process Development

Leveraging HTE & Automation for Synthetic Molecule Process Development

See how Takeda is building self-driving labs using Unchained tools to automate high-throughput workflows and optimize synthetic molecule drug development.

HTE & Automation for Synthetic Molecule Development

<h5>The Problem</h5>Making the perfect LNP for your application is a grueling and expensive journey. There’s loads to think about – the formulation, the mixing types and flow rates, dilution and more. Then, when it comes to scaling-up, you might have to change device or end up using tons of consumables for large batches. Nailing the right LNP process can be a huge pain!<h5>The Solution</h5>Sunshine is a semi-automated microfluidic platform, saving you time, effort and money during LNP screening and process development. It can split up your materials into multiple experiments for rapid screening of process conditions, cranking up your workflow speed. Sunshine also flexes reusable, glass microfluidics and automatic cleaning cycles, reducing &nbsp;your financial and time burden. Once you’ve dialed in your process, Sunshine can be run fully continuously! Just plug in your conditions and let it rip.<h5>The Proof</h5>Join us for this seminar to see why Sunshine is the top performing LNP optimization and scale up tool. We’ll show you how easy it is to screen both formulations and conditions, and show you some real results from Sunshine in action. Plus, we’ll share tips to keep costs down and productivity up!<blockquote>Presenter: Gareth Bolitho (Sales Specialist - LNP Solutions, Unchained Labs)Presenter:&nbsp;Alex Kerr (Senior Applications Scientist, Unchained Labs)</blockquote>

Unchained Labs: Save time and cut costs in your LNP optimization workflow with Sunshine

Save time and cut costs in your LNP optimization workflow with Sunshine

Join us for this seminar to see why Sunshine is the top performing LNP optimization and scale up tool. 