<p><span><strong>This study compares loss-on-ignition, acid decarbonation, and combustion elemental analysis for measuring organic carbon in sediments using certified reference materials and real samples. Loss-on-ignition conversions were inaccurate, while acid washing before elemental analysis caused significant organic carbon loss and poor precision.</strong></span></p><p><span>Combustion pretreatment followed by elemental analysis provided accurate and precise organic and inorganic carbon measurements, confirmed by temperature-dependent combustion. Across more than 150 intertidal sediment samples, acid decarbonation underestimated organic carbon by 37% ± 8%, supporting combustion-based elemental analysis as the preferred approach for reliable sediment carbon determination.</span></p><blockquote><h4><strong>The original article</strong></h4><h4><a target="_blank" rel="noopener noreferrer" href="https://www.sciencedirect.com/science/article/pii/S0146638026000902#s0055"><strong>Comparing loss-on-ignition, acid decarbonation and combustion elemental analysis for measuring organic carbon concentrations – recommendations for best practice</strong></a></h4><p>Robert B. Sparkes, Stuart A. Rae, Lucy McMahon, Hannah L. Mossman, David McKendry, Clare E. Dean, Graham Tinsley, Frances Fowden, Connor J. Grisdale, Hafiza Begum, Holly Hope, Charlotte McEnhill, Samuel O’Boyle, Nawal Sohail, Marvyn Wachira, Rachel M. Dunk</p><p>Organic Geochemistry, Volume 218, 2026, 105215</p><div><a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1016/j.orggeochem.2026.105215"><span>10.1016/j.orggeochem.2026.105215</span></a></div><h6>licensed under <a target="_blank" rel="noopener noreferrer" href="https://creativecommons.org/licenses/by/4.0/"><strong>CC-BY 4.0</strong></a></h6></blockquote><p><strong>Selected sections from the article follow. Formats and hyperlinks were adapted from the original.</strong></p><div><div><div><div><div><p>Environmental and Earth scientists frequently require measurements of carbon contents, including both the total carbon concentration (TC) and the fractions contributed by carbon from organic matter (organic carbon; OC) and carbonate minerals (inorganic carbon; IC; <a target="_blank" rel="noopener noreferrer" href="https://www.sciencedirect.com/science/article/pii/S0146638026000902#b0025"><span>Bendle et al., 2009</span></a>, <a target="_blank" rel="noopener noreferrer" href="https://www.sciencedirect.com/science/article/pii/S0146638026000902#b0220"><span>Radabaugh et al., 2018</span></a>, <a target="_blank" rel="noopener noreferrer" href="https://www.sciencedirect.com/science/article/pii/S0146638026000902#b0230"><span>Saderne et al., 2019</span></a>, <a target="_blank" rel="noopener noreferrer" href="https://www.sciencedirect.com/science/article/pii/S0146638026000902#b0240"><span>Scheingross et al., 2019</span></a>, <a target="_blank" rel="noopener noreferrer" href="https://www.sciencedirect.com/science/article/pii/S0146638026000902#b0260"><span>Smeaton et al., 2021</span></a>, <a target="_blank" rel="noopener noreferrer" href="https://www.sciencedirect.com/science/article/pii/S0146638026000902#b0295"><span>Vonk et al., 2012</span></a>, <a target="_blank" rel="noopener noreferrer" href="https://www.sciencedirect.com/science/article/pii/S0146638026000902#b0315"><span>Wood et al., 2021</span></a>).</p><p>Accurate, precise, and affordable carbon concentration measurements are critical to the drive towards net-zero emissions, which requires monitoring, reporting and verification of carbon burial and release from an array of global environments (<a target="_blank" rel="noopener noreferrer" href="https://www.sciencedirect.com/science/article/pii/S0146638026000902#b0210"><span>Post et al., 2001</span></a>, <a target="_blank" rel="noopener noreferrer" href="https://www.sciencedirect.com/science/article/pii/S0146638026000902#b0265"><span>Smith, 2004</span></a>, <a target="_blank" rel="noopener noreferrer" href="https://www.sciencedirect.com/science/article/pii/S0146638026000902#b0270"><span>Smith et al., 2020</span></a>). Carbon concentration measurements also underpin further analyses (e.g. normalising the concentration of individual biomarker compounds against the total organic carbon concentration, calculating elemental carbon to nitrogen ratios (<a target="_blank" rel="noopener noreferrer" href="https://www.sciencedirect.com/science/article/pii/S0146638026000902#b0290"><span>van Dongen et al., 2008</span></a>), determining the correct sample load for isotope ratio measurements). Despite carbon concentration measurements being ubiquitous throughout multiple disciplines there is no standard approach for making these, especially determining the organic component of the sedimentary carbon (<a target="_blank" rel="noopener noreferrer" href="https://www.sciencedirect.com/science/article/pii/S0146638026000902#b0080"><span>Fest et al., 2022</span></a>, <a target="_blank" rel="noopener noreferrer" href="https://www.sciencedirect.com/science/article/pii/S0146638026000902#b0320"><span>Young et al., 2018</span></a>). Different disciplines have often generated their own consensus approach, which may not align with studies from another field, even those working on similar samples and asking similar questions (<a target="_blank" rel="noopener noreferrer" href="https://www.sciencedirect.com/science/article/pii/S0146638026000902#b0070"><span>Farmer et al., 2014</span></a>). Use of an agreed standard measurement protocol for carbon concentrations, or understanding the agreement/variability between protocols, is vital for regulatory monitoring, reporting and verification (MRV), such as the ongoing development of carbon offsetting standards that, if implemented robustly, could provide real-world benefits to climate mitigation (<a target="_blank" rel="noopener noreferrer" href="https://www.sciencedirect.com/science/article/pii/S0146638026000902#b0035"><span>Bonn et al., 2014</span></a>, <a target="_blank" rel="noopener noreferrer" href="https://www.sciencedirect.com/science/article/pii/S0146638026000902#b0045"><span>Burden et al., 2023</span></a>, <a target="_blank" rel="noopener noreferrer" href="https://www.sciencedirect.com/science/article/pii/S0146638026000902#b0105"><span>Guizar-Coutiño et al., 2022</span></a>, <a target="_blank" rel="noopener noreferrer" href="https://www.sciencedirect.com/science/article/pii/S0146638026000902#b0190"><span>Needelman et al., 2018</span></a>, <a target="_blank" rel="noopener noreferrer" href="https://www.sciencedirect.com/science/article/pii/S0146638026000902#b0205"><span>Pan et al., 2022</span></a>). Determining a standardised, verified approach to carbon measurement is important for those performing MRV, who may not have access to advanced and/or expensive analytical instrumentation.</p><p>This study compares three common methods for quantifying the total and organic carbon concentrations in sedimentary samples: i) loss-on-ignition, ii) elemental analysis combined with acid decarbonation, and iii) elemental analysis combined with organic matter combustion. The comparison focuses on assessing the accuracy, precision, and repeatability of each method, identifying their respective strengths and weaknesses, and independently confirming findings via a fourth method (temperature dependent combustion and infrared CO<sub>2</sub> measurement) to provide recommendations for best practice. A summary review of these methods is provided below.</p><h4><strong>2. Materials and methods</strong></h4><h5><strong>2.3. Independent testing of reference materials via TDC</strong></h5><p>Standards were analysed by the supplier (Elemental Microanalysis Ltd, UK) as part of the certification process: 15/30 elemental analysis measurements gave expected values of TC, OC and IC and the uncertainty for TC, following ISO/IEC17025. These values were independently checked using an <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/icpms/library?mainauthorItems=16&amp;search=Soli+TOC"><strong>Elementar SoliTOC cube</strong></a> instrument at the instrument manufacturer’s headquarters (Elementar Analysensysteme, Hanau, Germany), which used the TDC method. Two combustion ramps were applied, first a two-step OC and IC determination at 500 °C and 900 °C, and then a three-step programme at 400 °C and 600 °C for easily-combustible and residual OC fractions and 900 °C for IC, with three repeat measurements of each. The SoliTOC cube instrument also analysed the agricultural soil sample, again making three repeat measurements of both the two-step and three-step temperature dependent combustion protocols (see Supplementary Table 3).</p><h5><strong>2.5. Elemental analysis</strong></h5><p>Total carbon concentrations were measured following the protocol described in <a target="_blank" rel="noopener noreferrer" href="https://www.sciencedirect.com/science/article/pii/S0146638026000902#b0180"><span>Mossman et al. (2022)</span></a>. 20&nbsp;mg of either untreated or pre-treated sample was weighed into tin capsules (Elemental Microanalysis Ltd.) and analysed for carbon concentrations using a Vario EL cube elemental analyser (Elementar Ltd.). Before each analytical run, the instrument was cleaned using three blanks without oxygen and seven blanks with oxygen, and calibrated using five analyses of up to 14&nbsp;mg ethylenediaminetetraacetic acid (EDTA) standard (Elemental Microanalysis Ltd.) and three analyses of an independent Soil Standard (Clay) CRM, acquired separately to the Soil Standard (Clay) CRM used to create analytical samples for this study (Elemental Microanalysis Ltd.). Three analyses of the EDTA calibration standard were repeated after every twenty samples. Long-term drift was monitored by repeated measurements of an internal laboratory standard sample, which has been analysed since 2015. Over the course of 65 measurements across 10 instrument runs for this study the laboratory standard showed no systematic drift.</p><h4><strong>3. Results and discussion</strong></h4><h5><strong>3.1. Testing of certified reference materials (CRMs) using temperature dependent combustion (TDC)</strong></h5><p>Both two-step and three-step TDC protocols consistently measured carbon contents close to but slightly below the supplier-certified values (see <a target="_blank" rel="noopener noreferrer" href="https://www.sciencedirect.com/science/article/pii/S0146638026000902#f0005"><span>Fig. 1</span></a>). For Soil Standard (Clay), the TDC instrument under-estimated OC by 0.10&nbsp;wt% (two-step) and 0.14&nbsp;wt% (three-step) and IC by 0.15&nbsp;wt% (two-step) and 0.087&nbsp;wt% (three-step). For Soil Standard (Peaty) the TDC instrument underestimated OC by 0.26&nbsp;wt% (two-step) and 0.34&nbsp;wt% (three-step), and IC by 0.021&nbsp;wt% (two-step) and 0.090&nbsp;wt% (three-step). Relative differences for OC are small, 5.1 – 7.0% for Clay and just 1.7 – 2.2% for Peaty, but higher for IC due to the small amount of IC present in the standards (25 – 44% for Clay, 7.0 – 30% for Peaty).</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Organic_Geochemistry_Volume_218_2026_105215_Fig_1_Comparison_of_organic_carbon_and_inorganic_carbon_measurements_on_two_certified_reference_materials_using_four_methods_31537717b3.jpg" alt="Organic Geochemistry, Volume 218, 2026, 105215: Fig. 1. Comparison of organic carbon and inorganic carbon measurements on two certified reference materials using four methods. Upper panel is Soil Standard (Clay) and lower panel Soil Standard (Peaty). Yellow diamonds show the certified value (Elemental Microanalysis Ltd) with manufacturer stated uncertainty in total carbon used as error bars for OC and IC (n = 30). White and grey symbols represent Loss-on-Ignition results using four different organic matter to organic carbon conversion equations (grey sqaures use the “van Bemmelen” scaling factor (Pribyl, 2010), grey circles the Craft et al. (1991) factor, white diamonds the Ouyang and Lee (2020) equation and white circles the Smeaton et al. (2022) equation. IC values for all LoI results use the C/CO2 mass fraction (Wang et al., 2011). Blue circles show the acid decarbonation and elemental analysis protocol, orange circles the combustion and elemental analysis protocol. Green and purple circles show mean results from temperature dependent combustion method (2-step and 3-step protocols respectively). Error bars represent one standard deviation after multiple measurements (n = 2 to n = 4). (For interpretation of the references to colour in this figure legend, the reader is referred to the web version of this article.)" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Organic_Geochemistry_Volume_218_2026_105215_Fig_1_Comparison_of_organic_carbon_and_inorganic_carbon_measurements_on_two_certified_reference_materials_using_four_methods_31537717b3.jpg 116w," sizes="100vw" width="2756" height="3698"></p><h5><strong>3.4. Reproducibility tests</strong></h5><p>Having shown that combustion coupled with elemental analysis was the most robust method for measuring OC in pure and diluted standards, the next experiment tested the reproducibility of these protocols over multiple implementations. A dried, ground agricultural soil sample was repeatedly analysed using each method (separate aliquots were measured using LoI at 500 °C and 800 °C, separate untreated aliquots were analysed via EA, separate aliquots were combusted at 500 °C and analysed via EA, and separate acid decarbonations were carried out prior to EA measurements). This required a large amount of starting material, more than was available in the CRMs. Independent external measurement of the soil sample using temperature dependent combustion (Elementar, Germany) gave mean OC&nbsp;=&nbsp;2.50&nbsp;±&nbsp;0.002&nbsp;wt% and IC&nbsp;=&nbsp;1.29&nbsp;±&nbsp;0.008&nbsp;wt% for combustion to 500 °C (n&nbsp;=&nbsp;3), whereas combustion to 600 °C gave OC&nbsp;=&nbsp;2.52&nbsp;±&nbsp;0.075 and IC&nbsp;=&nbsp;1.12&nbsp;±&nbsp;0.010&nbsp;wt% (n&nbsp;=&nbsp;3).</p><div><p>LoI showed differences in mean OC depending on the equation chosen (<a target="_blank" rel="noopener noreferrer" href="https://www.sciencedirect.com/science/article/pii/S0146638026000902#f0010"><span>Fig. 2</span></a>). The conversions of <a target="_blank" rel="noopener noreferrer" href="https://www.sciencedirect.com/science/article/pii/S0146638026000902#b0050"><span>Craft et al. (1991)</span></a> and <a target="_blank" rel="noopener noreferrer" href="https://www.sciencedirect.com/science/article/pii/S0146638026000902#b0200"><span>Ouyang and Lee (2020)</span></a> were similar to the independent measurements (2.90&nbsp;±&nbsp;0.05&nbsp;wt% and 2.60&nbsp;±&nbsp;0.07&nbsp;wt% respectively; n&nbsp;=&nbsp;9 for each), but the equations of <a target="_blank" rel="noopener noreferrer" href="https://www.sciencedirect.com/science/article/pii/S0146638026000902#b0255"><span>Smeaton et al. (2022)</span></a> and van Bemmelen over-estimated OC (4.19&nbsp;±&nbsp;0.05 and 4.21&nbsp;±&nbsp;0.08&nbsp;wt% respectively; n&nbsp;=&nbsp;9 for each). IC estimates using the C/CO<sub>2</sub> mass fraction conversion were higher than the expected value (1.91&nbsp;±&nbsp;0.06&nbsp;wt%, n&nbsp;=&nbsp;9). Note that the relative standard deviation for OC<sub>LoI</sub> was&nbsp;∼&nbsp;1.8%, and 3.2% for IC<sub>LoI</sub>, showing acceptable run-to-run precision.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Organic_Geochemistry_Volume_218_2026_105215_Fig_2_Organic_and_inorganic_carbon_measurements_following_repeated_analysis_of_a_homogenised_soil_sample_via_multiple_methods_c5d62ece0b.jpg" alt="Organic Geochemistry, Volume 218, 2026, 105215: Fig. 2. Organic and inorganic carbon measurements following repeated analysis of a homogenised soil sample via multiple methods. Markers for each method are shown in the legend and are the same as Fig. 1. Small black circles and error bars show the mean and one standard deviation after multiple repetitions of each protocol (n = 9 for LoI, C-EA and AD-EA, n = 3 for TDC)." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Organic_Geochemistry_Volume_218_2026_105215_Fig_2_Organic_and_inorganic_carbon_measurements_following_repeated_analysis_of_a_homogenised_soil_sample_via_multiple_methods_c5d62ece0b.jpg 204w," sizes="100vw" width="2363" height="1815"></p><p>Since OC<sub>C-EA</sub> and IC<sub>AD-EA</sub> were calculated by subtraction from mean TC<sub>EA</sub>, all data from the C-EA and AD-EA methods plotted on a straight line in <a target="_blank" rel="noopener noreferrer" href="https://www.sciencedirect.com/science/article/pii/S0146638026000902#f0010"><span>Fig. 2</span></a>, representing OC&nbsp;+&nbsp;IC&nbsp;=&nbsp;TC. However, position and scatter along that line varied between the two pre-treatment techniques. OC<sub>C-EA</sub> clustered just higher than the independent measurements using TDC (2.60&nbsp;±&nbsp;0.03&nbsp;wt%, n&nbsp;=&nbsp;9). Propagating the errors in TC and IC gave a combined error estimate of&nbsp;±&nbsp;0.1&nbsp;wt% for the repeated OC<sub>C-EA</sub> measurements. IC<sub>C-EA</sub> was also close to but slightly higher than the TCD results, 1.35&nbsp;±&nbsp;0.03&nbsp;wt%. AD-EA, however, gave mean OC values of 2.00&nbsp;±&nbsp;0.12&nbsp;wt% (n&nbsp;=&nbsp;9) which was more variable run-to-run than the other methods and gave a significantly (p&nbsp;&lt;&nbsp;0.0001) lower mean OC value than the TCD results. Once again, acid decarbonation results suggested that a large amount of organic matter was lost during the acid treatment, tested further in the next section.</p></div><h4><strong>4.3. Conclusions</strong></h4><p>An accurate, precise, efficient, and standardised method for measuring total, organic and inorganic carbon contents of sediment samples is critical for both scientific research and environmental monitoring and reporting and verification. We rigorously tested three methods for measuring carbon contents in soils and intertidal sediments, using certified reference materials and&nbsp;&gt;&nbsp;150 sediment samples. Loss-on-ignition (LoI) is cheap and easy but showed moderate run-to-run variability and, without careful calibration, it is not accurate.</p><p>Elemental analysis (EA) is an accurate and precise method for total carbon (TC) analysis. Measuring organic and inorganic carbon via EA requires pre-treatment of the sample, and this study tested both acid decarbonation and combustion preparation techniques. Acid decarbonation led to significant and variable organic carbon loss, meaning that true organic carbon concentrations are likely higher than those measured following acidification. Combustion pre-treatment was shown to efficiently remove organic matter, leading to accurate and precise results, and we would recommend making organic carbon measurements in this way.</p></div></div></div></div></div>

Comparing loss-on-ignition, acid decarbonation and combustion elemental analysis for measuring organic carbon concentrations – recommendations for best practice

<p><strong>Wiley, a global leader in authoritative content and research intelligence, today announced the launch of its spectral analysis application programming interface (API) portfolio, providing users with a new, faster way to access its trusted spectral data, analytical algorithms, and predictive models—within their own workflows.</strong></p><p>Wiley has one of the most comprehensive and trusted collections of scientific reference databases in the world, relied upon as a gold standard for identifying unknown chemical compounds by laboratories, instrument vendors, and software platforms across pharmaceuticals, forensics, environmental science, chemicals, food, materials, and other fields. The new portfolio extends the data and tools into modern, API-driven environments—allowing users to integrate high-quality spectral intelligence directly into their own systems and workflows.</p><p>As sample volumes grow and lab workflows become more automated and software-driven, identifying and verifying compounds quickly and reliably becomes even more critical. The <strong>new API portfolio</strong> meets that need directly, giving labs and platforms a faster way to complete the process, whether catching a quality issue on a production line or identifying an unknown compound in the field. The result is less manual effort, faster analysis, and more confidence in the answer.</p><p>The launch builds on Wiley's mission to transform knowledge into actionable intelligence for corporate and academic researchers around the world.</p><p>"<i>Speed matters when you're trying to identify an unknown substance; a delayed analysis can mean an assembly line sitting idle or a forensic lab holding up a case,</i>” said Armughan Rafat, Wiley senior vice president and chief AI and data services officer. “<i>We've spent decades building the reference data this industry trusts. Now, by making that spectral data and analytical intelligence available through APIs, we're setting the standard for how labs and vendors turn unknowns into answers faster and at scale.</i>"</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Wiley_API_spectral_search_5bfcb1dd9b.png" alt="Wiley: spectral analysis API" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Wiley_API_spectral_search_5bfcb1dd9b.png 128w," sizes="100vw" width="802" height="977"></p><h5><strong>The API portfolio launches with four core capabilities:</strong></h5><ul><li><strong>Spectral Database Search API </strong>– Query Wiley’s comprehensive reference collections for rapid compound identification.</li><li><strong>Spectrum-Structure Validation API</strong> – Confirm proposed chemical structures against experimental spectral data.</li><li><strong>Compound Classification API</strong> – Classify unknown substances, including drugs, based on compound class.</li><li><strong>Spectra Prediction API </strong>– Generate predicted spectra to support research, method development, and validation.</li></ul><p>Unlike fragmented in-house databases or instrument-specific solutions, these APIs offer a continuously curated, vendor-neutral foundation that supports multi-technique workflows, regulatory compliance, and cross-platform interoperability. As a result, laboratories can increase throughput, minimize downtime, and protect the value of the instrumentation and data in which they've already invested.</p><h4><strong>Spectral Databases &amp; APIs</strong></h4><p>Spectral databases contain unique molecular “fingerprints” of substances captured through analytical techniques such as <strong>infrared (IR), mass spectrometry (MS), nuclear magnetic resonance (NMR), and Raman spectroscopy</strong>. By comparing experimental spectra against validated reference data, researchers can accurately identify unknown compounds across a wide range of applications.</p><p>An API is a common way for computer systems, from lab instruments to software platforms, to request information from one another and get an answer back automatically.</p><blockquote><p><strong>For more information about the Wiley spectral analysis API portfolio, please</strong> <a target="_blank" rel="noopener noreferrer" href="https://sciencesolutions.wiley.com/spectral-analysis-apis/"><strong>visit this website</strong></a></p></blockquote><h4><strong>About Wiley</strong></h4><p>Wiley is a global leader in authoritative content and research intelligence for the advancement of scientific discovery, innovation, and learning. With more than 200 years at the center of the scholarly ecosystem, Wiley combines trusted publishing heritage with AI-powered platforms to transform how knowledge is discovered, accessed, and applied. From individual researchers and students to Fortune 500 R&amp;D teams, Wiley enables the transformation of scientific breakthroughs into real-world impact. From knowledge to impact—Wiley is redefining what's possible in science and learning.&nbsp;</p>

Wiley Launches Its First Spectral Analysis API Portfolio

<p><strong>Our Library never stops expanding. What are the most recent contributions to LabRulezICPMS Library in the week of 14th September 2026? Check out new documents from the field of spectroscopy/spectrometry and related techniques!</strong></p><blockquote><p><span style="font-size:20px;">👉 </span><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library"><span style="font-size:20px;"><strong>SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT SPECTROSCOPY/SPECTROMETRY RELATED TECHNIQUES</strong></span></a></p></blockquote><blockquote><p><strong>👉 Need info about different analytical techniques?</strong> Peek into <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library"><strong>LabRulezLCMS</strong></a> or <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library"><strong>LabRulezGCMS</strong></a> libraries.</p></blockquote><p>This week we bring you technical note by <strong>Agilent Technologies, </strong>application notes by<strong> Metrohm </strong>and <strong>Thermo Fisher Scientific </strong>and poster by<strong> Shimadzu / AOAC!</strong></p><h3><strong>1. Agilent Technologies: Transitioning from the </strong><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/icpms/library?mainauthorItems=10&amp;search=Cary+630"><strong>Agilent Cary 630 FTIR</strong></a><strong> to the </strong><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/icpms/library?mainauthorItems=10&amp;search=Cary+635"><strong>Agilent Cary 635 FTIR Spectrometer</strong></a></h3><p><strong>Demonstrating methodology equivalence for pharmaceutical applications</strong></p><ul><li>Technical note</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/pdf/te_cary_630_ftir_transition_cary_635_ftir_5994_9408en_agilent_a2ea2ce512.pdf"><strong>Full PDF for download</strong></a><strong>&nbsp;</strong></li></ul><p>Fourier transform infrared (FTIR) spectroscopy is a powerful analytical tool used to analyze a wide variety of materials by interpreting their infrared (IR) wavenumber absorptions. Within pharmaceutical and biopharmaceutical industries, FTIR analysis is integral for material identification and quality assurance of pharmaceutical&nbsp;substances.&nbsp;</p><p>In the pharmaceutical industry, the Agilent Cary 630 FTIR is used for the identification of drug products, incoming goods, and packaging materials, as specified in global pharmacopoeias, and provides quantitative information such as the concentration of components within pharmaceutical formulations.&nbsp;</p><p>Agilent now presents the Cary 635 FTIR spectrometer—an ultracompact, easy-to-use, high-performing, portable FTIR system. With greater IR power, the Cary 635 FTIR features greater detection sensitivity and faster scanning times. With its predecessor's modular design, the Cary 635 FTIR can analyze the same samples with a newly enhanced performance quality and efficiency.&nbsp;</p><p>For users in the pharmaceutical industry who have experience with the Cary 630 FTIR, this technical overview demonstrates the common methodologies and workflows between the Cary 635 FTIR and Cary 630 FTIR spectrometers for pharmaceutical purposes. It will compare the ability of the two instruments to measure and label IR spectra, identify relevant compounds such as active pharmaceutical ingredients (APIs), and quantify substances within commercial&nbsp;formulations.</p><h4><strong>Instrumentation and software&nbsp;</strong></h4><p>For comparison, all three application tests were conducted using the Cary 630 FTIR and Cary 635 FTIR spectrometers with ZnSe optics and equipped with a single-reflection diamond attenuated total reflectance (ATR) accessory. The specific method parameters are outlined within each corresponding application. Both the Cary 635 FTIR and Cary 630 FTIR use Agilent MicroLab software, which provides step-by-step instructions with supporting images to guide users through the entire analytical workflow. Both spectrometers follow the same methods and operational procedures from sample loading to data processing (Figure 1). Results are presented in an easy-to-understand, color-coded format with customizable limits, ensuring a rapid and intuitive data review.</p><h4><strong>Conclusion&nbsp;</strong></h4><p>The comparison presented here of both the Agilent Cary 635 FTIR and Cary 630 FTIR spectrometers demonstrated shared methodologies that produced consistent results across key applications within pharmacopoeia, including spectrum production, compound identification, and substance&nbsp;quantification. Featuring the same modularity, robustness, and ease of use as the Cary 630 FTIR, the Cary 635 FTIR also offers greater sensitivity and signal-to-noise ratio, resulting from an enhanced IR source intensity. Therefore, users operating in regulated environments can confidently upgrade to the Cary 635 FTIR with the understanding that the workflow from the Cary 630 FTIR is directly transferrable, and that their routine analyses will remain consistent and reliable.</p><h3><strong>2. Metrohm: Coconut water analysis by NIRS</strong></h3><p><strong>Determination of Brix, salinity, conductivity, and pH with one instrument</strong></p><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/pdf/an_nir_145_download_05589da42d.pdf"><strong>Full PDF for download</strong></a></li></ul><p>Fresh coconut water is the main edible part of the coconut (aside from the coconut meat) and has gained popularity as a health drink in recent years. Multiple factors influence the quality, such as harvesting time, growth location, and storage duration. This poses a challenge for industrial producers to achieve and maintain the desired product quality.&nbsp;</p><p>Testing the properties of coconut water with standard laboratory methods can be challenging, since trained lab personnel are needed. In contrast, near-infrared spectroscopy (NIRS) is fast, chemical-free, and does not require sample preparation. This Application Note explains how NIRS is used for the multiparameter analysis of coconut water. The NIRS solution is easy to use and can be implemented either atline or in a quality control lab.</p><h4><strong>EXPERIMENTAL EQUIPMENT&nbsp;</strong></h4><p>An <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/icpms/library?mainauthorItems=220&amp;search=OMNIS+NIR"><strong>OMNIS NIR Analyzer </strong></a>Liquid with a 1 mm flowthrough cell (Figure 1) was used to analyze 206 coconut samples from a commercial supplier. In this configuration, a peristaltic pump injects the sample into the flow-through cell, which is inserted into the cuvette holder. The cell is rinsed with water after each measurement.</p><h4><strong>CONCLUSION</strong></h4><p>This Application Note shows the feasibility of using NIR spectroscopy for the quality control of coconut water. The parameters Brix, conductivity, turbidity, pH value, and salinity can be monitored by NIRS in seconds without any sample preparation. The presented setup with a flow-through cell not only simplifies sample handling but also allows full automation when using an OMNIS Sample Robot. In addition to coconut water, the coconut fruit itself can also be analyzed using near-infrared spectroscopy.</p><h3><strong>3. Shimadzu / AOAC: Analysis of Heavy Metals in Baby Food Using ICP-MS</strong></h3><ul><li>Poster</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/pdf/aoac_2026_46_d9c14b32e0.pdf"><strong>Full PDF for download</strong></a></li></ul><p>Babies are more vulnerable to the effects of toxic metals, and baby food therefore requires careful testing. US and EU regulations1)–3) set limits for toxic metals in baby food. This study analyzed five baby foods using the <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/icpms/library?mainauthorItems=1&amp;search=ICPMS-2040%2F2050"><strong>ICPMS-2040/2050</strong></a> and evaluated spike recovery and long-term stability.</p><h4><strong>Conclusion&nbsp;</strong></h4><p>Elemental analysis of baby food was conducted using ICP-MS.&nbsp;</p><p>We achieved detection limits that met stringent standards. The spike recovery tests provided good results for all samples with different matrices, confirming the validity of the analysis. Additionally, we analyzed 50 samples of infant formula with a high matrix approximately six hours and confirmed good stability.</p><h3><strong>4. Thermo Fisher Scientific: Process Raman as a comprehensive solution for downstream buffer workflow</strong></h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/pdf/process_raman_as_comprehensive_solution_an1440_en_c8049b8ede.pdf"><strong>Full PDF for download</strong></a></li></ul><p>Raman technology is rapidly gaining interest as a promising Process Analytical Technology (PAT) solution for real-time, non-invasive monitoring and control of downstream biopharma processes, especially for therapeutics like monoclonal antibodies (mAbs) and nucleic acids. Raman measurement, based on the vibration of molecular bonds, is highly specific for identification and quantification, even in complex or interfering matrices.&nbsp;</p><p>As an in-line PAT tool, Raman spectroscopy offers direct and rapid measurement in aqueous phases without sample preparation. These features make it ideal for monitoring and controlling dynamic processes such as downstream processing.</p><p>This study demonstrates a real-time methodology for accurately quantifying formulation excipients in the dynamic ultrafiltration/diafiltration (UF/DF) process using the <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/products/2233"><strong>Thermo Scientific™ MarqMetrix™ All-In-One Process Raman Analyzer</strong></a> (Figure 1). In addition, this study also illustrates a case where process Raman was able to provide real-time information on buffer quality.</p><h4><strong>Results&nbsp;</strong></h4><p>The Partial Least Squares (PLS) models for L-histidine, L-arginine, and sucrose were initially tested using seven independent samples collected on three different process Raman analyzers. Data were mathematically processed to standardize spectra across instruments before applying the models. All the spectra were interpolated to have a common x-axis by equally spacing the 2048 pixels across 60 to 3250 cm-1 Raman shift, followed by relative y-axis standardization using the SRM fluorescence data as described in the NIST standardization protocol.² Figure&nbsp;3 shows the correlation plot of predicted versus reference values for L-histidine, L-arginine, and sucrose for the validation samples. A correlation coefficient of over 95% and a root means square error (RMSE) of less than 5% of the reference value for calibration, cross-validation, and prediction across three instruments demonstrate the reliability of process Raman to accurately predict the concentrations of these excipients, as well as easy model transferability.</p><h4><strong>Conclusion</strong></h4><p>This work, combined with our previous demonstrations of accurate in-line protein quantification during UF/DF processes,⁷, ⁸ clearly highlights the value of process Raman for downstream process monitoring. Raman spectroscopy allows for the simultaneous measurement of multiple critical process parameters (CPPs) with a single scan. These findings establish process Raman as a PAT tool with unparalleled benefits compared to other analytical methods.&nbsp;</p><p>Simultaneous measurement of protein and excipient concentrations not only allows tighter process control but also opens opportunities for automating downstream processing.&nbsp;</p><p>The ability of process Raman to provide real-time insights into buffer quality before its use in UF/DF runs offers substantial value by preventing batch failures. This capability enhances quality control, making Raman spectroscopy an essential tool for integration as an in-line sensor to improve downstream process monitoring, control, and automation.</p>

News from LabRulezICPMS Library - Week 38, 2026

Article

Product

Application

Scientific article

Science and research

Software

Poster

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

For over 200 years we have been helping people and organizations develop the skills and knowledge they need to succeed.
We develop digital education, learning, assessment, and certification solutions to help universities, businesses, and individuals move between education and employment and achieve their ambitions.

Wiley

LABTECH Analyser of organically bound halogens and sulphur LTX Unique

The latest model in the line of AOX/EOX analysers is the LTX Unique, which is the successor of the successful LTX-2000+ model

<p><strong>In the last decade, the group parameters of organically bound halogens (AOX, EOX, POX) have become the most monitored indicators in the analysis of environmental samples. What speaks in favour of these group indicators is the constantly increasing number of individual halogenated compounds that need to be monitored in the environment, and the relative speed, simplicity and excellent reproducibility of the entire analytical determination.</strong></p><p>LABTECH has been developing and manufacturing organically bound halogens analysers for over 20 years. The latest model in the line of AOX/EOX analysers is the LTX Unique, which is the successor of the successful LTX-2000+ model.</p><h3><strong>LTX Unique – AOX, EOX, POX and TX analyzer</strong></h3><p>LTX Unique brings easy-to-use, fast and precise determination of halogens to your lab. The modular system is capable to analyze wide range of halogen concentrations in various matrices at high flexibility and low cost operation. It meets with applicable ISO, DIN, EPA and ASTM standards.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/LABTECH_LTX_Unique_AOX_EOX_POX_and_TX_analyzer_6f92cc9a9f.jpg" alt="LABTECH: LTX Unique – AOX, EOX, POX and TX analyzer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_LABTECH_LTX_Unique_AOX_EOX_POX_and_TX_analyzer_6f92cc9a9f.jpg 245w," sizes="100vw" width="800" height="232"></p><h4><strong>Analysis of Adsorbable Organic Halogens (AOX)</strong></h4><p>Most organic halogens are originated during utilization of different kind of solid and liquide materials and compounds which contain chlorine substances. Monitoring of processes like water treatment, bleaching, refinery and many others industrial processes is important to avoid contamination of environment by organic halogens.</p><p><strong>LTX UNIQUE</strong> is designed to measure organic bound halogens in solid and liquid samples. These halogens are determinated as specific groups of parameters:</p><ul><li><strong>AOX</strong> (Adsorbable Organic Halogens)</li><li><strong>EOX</strong> (Extractable Organic Halogens)</li><li><strong>POX </strong>(Purgeable Organic Halogens)</li><li><strong>TX</strong> (Total Organic Halogens)</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/LABTECH_LTX_UNIQUE_Analysis_of_Adsorbable_Organic_Halogens_AOX_e86691384a.jpg" alt="LABTECH: LTX UNIQUE - Analysis of Adsorbable Organic Halogens (AOX)" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_LABTECH_LTX_UNIQUE_Analysis_of_Adsorbable_Organic_Halogens_AOX_e86691384a.jpg 234w," sizes="100vw" width="628" height="419"></p><h4><strong>LTX UNIQUE meets your lab needs</strong></h4><p>This microcoulometric combustion analyzer directly determinates concentrations of usually 10 micrograms per litre in water of organically bound chlorine, bromine and iodine (expressed as chloride or halogens) adsorbable on activated carbon. Higher concentrations are possible by diluting prior to analysis. The AOX analyzer can be used for either <strong>routine determination of halogens</strong> or <strong>R&amp;D</strong> in a wide range of <strong>environmental</strong> and <strong>industrial applications</strong>.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/LABTECH_LTX_UNIQUE_titration_curve_4d327bf3a6.jpg" alt="LABTECH: LTX UNIQUE - titration curve" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_LABTECH_LTX_UNIQUE_titration_curve_4d327bf3a6.jpg 245w," sizes="100vw" width="800" height="269"></p><h4><strong>LTX Unique – highlights of the technology</strong></h4><h5><strong>Furnace</strong></h5><ul><li>High temperature furnace with adjustable temperature control</li><li>Robust combustion tube allows efficient and time-optimized combustion proces</li><li>Pre-treatment before the combustion process</li><li>Same combustion unit for AOX and EOX determination</li></ul><h5><strong>Microcoulometric Titration</strong></h5><ul><li>Durable and easy-to-use titration cell designed by Labtech</li><li>Wide dynamic range and high stability microcoulometer</li><li>Robust and compact electrodes with low and easy maintenance</li><li>Suitable for a separate determination of halides</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/LABTECH_LTX_UNIQUE_Microcoulometric_Titration_bc21e40ef0.jpg" alt="LABTECH: LTX UNIQUE - Microcoulometric Titration" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_LABTECH_LTX_UNIQUE_Microcoulometric_Titration_bc21e40ef0.jpg 235w," sizes="100vw" width="700" height="464"></p><h5><strong>Sample Introduction and Measurement</strong></h5><ul><li>Measurement of organic halogens in liquide and solid samples</li><li>Both quarts boats and frits are supported</li><li>Fast and easy switch over between AOX and EOX modules conected to the same measurement unit</li><li>Intuitive application SW quides the operator and save time for analysis</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/LABTECH_LTX_UNIQUE_Sample_Introduction_and_Measurement_eec4f7f68e.jpg" alt="LABTECH: LTX UNIQUE - Sample Introduction and Measurement" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_LABTECH_LTX_UNIQUE_Sample_Introduction_and_Measurement_eec4f7f68e.jpg 235w," sizes="100vw" width="700" height="464"></p><h4><strong>Determination of Organic Halogens</strong></h4><p>LTX Unique meets with all requirement in AOX analysis and other international and local standards are also supported (e.g. EOX, POX and TX methods). Halogens can be determined from a wide range of matrices by combustion process and microcoulemetric measurement. The following examples can give an overview how organically bound halogens are determinated:</p><ul><li><h5><strong>AOX (Adsorbable Organic Halogens)</strong></h5><ul><li>according to ISO 9562, DIN EN 9562, DIN 38 414-S18, ASTM D 4744-89, EPA Method 450.1, EPA Test Method 9020</li><li>Halogens are measured by sorption of organohalides from the aqueous sample on activated charcoal according to standardizes procedures. This charcoal is introduced to cumbustion tube.</li></ul></li><li><h5><strong>EOX (Extractable Organic Halogens)</strong></h5><ul><li>according to NEN 6402, DIN 38409-H8, DIN 38414-S17.</li><li>These organic halogens are determinated by extraction with low polar solvent.</li></ul></li><li><h5><strong>POX (Purgeable Organic Halogens)</strong></h5><ul><li>according DIN 38414-S17, EPA Test Method 9021</li><li>Volatile organic halogens as purched components are measured from water or suspension in inert gas at certain temperature.</li></ul></li><li><h5><strong>TX (Total Organic Halogens)</strong></h5><ul><li>according to EPA 9076</li><li>Determination of TX is run on a wide range of liquid hydrocarbon samples without any separation.</li></ul></li></ul><h4><strong>Specifications of LTX UNIQUE</strong></h4><ul><li><strong>Dimensions:</strong> 970 x 360 x 295 mm (W x D x H)</li><li><strong>Weight: </strong>27 kg</li><li><strong>Furnace temp</strong>.: Max. 1100 °C</li><li><strong>Power supply:</strong> 230 V / 50 Hz, max.1100 W</li><li><strong>Gas requirements: </strong>Oxygen 99.6 % (AOX/EOX)</li><li><strong>Argon: </strong>99.996 % (EOX)</li><li><strong>Software: </strong>ENGINE LT</li><li><strong>PC: </strong>Windows® 10</li><li><strong>Detector: </strong>Microcoulometer with Ag indication electrode</li><li><strong>Titration currents:</strong> 2000, 200, 20 and 2 uA</li><li><strong>Measuring range:</strong> 0,1 - 300 µg Cl-</li><li><strong>Limit of detection: </strong>0,02 µg Cl-</li></ul>

Products focused on Elemental Analysis - page 1

Related content

News from LabRulezICPMS Library - Week 38, 2026

Wiley Launches Its First Spectral Analysis API Portfolio

Comparing loss-on-ignition, acid decarbonation and combustion elemental analysis for measuring organic carbon concentrations – recommendations for best practice