Czech researchers from Charles University, Prague, led by Pavla Eliášová, have developed an advanced photocathode that helps convert the greenhouse gas carbon dioxide into pure ethanol using sunlight. The new technology solves a long-standing problem of material degradation in water, achieves record conversion efficiency, and opens the way toward sustainable production of green fuels.Converting carbon dioxide (CO2) into useful fuels using solar energy represents the holy grail of modern green chemistry. The device enabling this conversion is called a solar reactor. Its key element is a photocathode: a material that absorbs light and enables the chemical reaction. Cuprous oxide long appeared to be an ideal material because it is inexpensive, readily available, and excels at capturing solar rays. In practice, however, it faced a fundamental obstacle: in an aqueous environment under light, it transforms and degrades extremely rapidly—much like iron undergoing swift corrosion—and loses its functionality within just tens of minutes.The team from the Chemistry Section of the Faculty of Science, CU, led by Pavla Eliášová, in collaboration with Tomáš Hrbek from the Faculty of Mathematics and Physics, CU, resolved this issue by creating a unique "nano-sandwich". The scientists combined cuprous oxide with advanced two-dimensional materials called MXenes and, through precisely controlled heating, created an ultrathin layer of titanium dioxide on their surface. MXene modified in this way can rapidly drain electric charge from the cuprous oxide, thereby slowing down its decomposition. At the same time, it uses the charge further to convert carbon dioxide into liquid fuel."Surface-engineered MXene combined with cuprous oxide allowed us to unite the best of both materials. The copper base enables maximum utilization of light energy, while the conductive MXene framework ensures that the material remains active even after many hours of operation," explains research team leader Pavla Eliášová from the Chemistry Section of the Faculty of Science, Charles University.In laboratory tests, the new photocathode achieved a record solar-energy-to-ethanol conversion efficiency of 2,74 %. A crucial improvement is the formation of only a single product. While other systems often produce a mixture of byproducts, the material designed by the research team produces pure ethanol as its sole liquid product, which significantly simplifies its potential industrial application."This is a major step forward for us. On our laboratory scale, the system works very well and produces ethanol over many hours. In the next step, we want to further reinforce the stability of the entire photocathode and begin testing on a larger scale and under real daylight conditions," adds physical chemist Pavla Eliášová.The research was conducted within the international European project DESIRED (Horizon Europe), with support from the Charles University Research Centre (UNCE) and the L'Oréal-UNESCO For Women in Science program.<blockquote><h4>Article</h4><h4><a target="_blank" rel="noopener noreferrer" href="https://advanced.onlinelibrary.wiley.com/doi/10.1002/aenm.71469">Surface-Engineered Ti3C2Tx MXene/Cu2O Photocathodes for Highly Selective Photoelectrocatalytic CO2 Reduction to Ethanol</a></h4>Luis A. M. Carrascosa, Magdaléna Linková, Monika Remzová, Tomáš Hrbek, Pavla EliášováAdv. Energy Mater., 2026, 16, e71469<a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1002/aenm.71469">https://doi.org/10.1002/aenm.71469</a><h6>licenced under <a target="_blank" rel="noopener noreferrer" href="https://creativecommons.org/licenses/by/4.0/">CC-BY 4.0</a></h6></blockquote><h4>Abstract</h4>Cu2O is an inexpensive p-type semiconductor that promotes the photoelectrocatalytic CO2 reduction reaction (PEC CO2RR). While its low bandgap enables photoexcitation by visible light, long-term stability remains limited due to quick charge recombination and photocorrosion. Here, we enhanced charge separation and extraction by combining Cu2O with surface-engineered MXenes. In this novel architecture, TiO2 grows in situ on the surface of Ti3C2Tx and serves as a charge-transport layer, forming a junction with Cu2O. On the other side, the outer TiO2 surface exposed to the CO2-saturated electrolyte offers catalytically active sites for CO2 reduction. Acting as a central layer, the MXene conductive backbone provides an electronically continuous pathway for electron transport. In PEC CO2RR, the photocathode containing 50 wt.% of MXene and a balanced amount of TiO2 on the Ti3C2 surface outperformed the best Cu/CuxO-based systems operating in non-organic electrolytes reported in the literature. The FTO/Cu2O/ml-Ti3C2Tx-350-N2 photocathode reached 8.4&nbsp;µmol&nbsp;cm−2 h−1 ethanol production rate and 2.74% solar-to-ethanol efficiency after 2&nbsp;h. Moreover, pairing TiO2-MXene with Cu2O significantly stabilized the photocathode, which maintained 76% of the ethanol production rate after 6 h. Overall, our results establish surface-engineered Cu2O/TiO2-MXene heterostructures as a solid platform for highly selective, visible-light-driven ethanol production with significantly improved operational stability.

Researchers from Charles University, Prague, Have Developed a New Photocathode for Efficient Conversion of CO2 into Ethanol

<div><div>Protons play a central role in many chemical reactions in living organisms. In some cases, a proton may be shared between two nearby molecular groups rather than being localized on just one. This phenomenon can strongly influence the properties and reactivity of biomolecules and is important for enzyme function.</div></div><div>Researchers led by Hanns Christian Schewe (IOCB Prague and Heyrovský Institute of the CAS) together with Lukáš Tomaník (UCT Prague and Fritz Haber Institute of the Max Planck Society) have now investigated proton sharing in a range of biologically relevant polycarboxylic acids dissolved in water, including several molecules related to the citric acid cycle (Krebs cycle).Using liquid-jet X-ray photoelectron spectroscopy (LJ-PES), a technique that reveals the chemical environment of atoms in molecules dissolved in water, the team was able to probe the position of protons on an ultrafast time scale. Unlike techniques such as NMR, which provide a time-averaged picture, photoelectron spectroscopy captures the instantaneous distribution of protons and can therefore distinguish more directly between localized and shared states.The results showed significant proton sharing only in maleic acid dissolved in water. In contrast, protons remained mostly localized at individual carboxylic groups in succinic acid, fumaric acid, malic acid, glutaric acid and citric acid. This suggests that proton sharing is not a common feature of these molecules when they are freely dissolved in water.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/IOCB_Prague_Cropped_part_of_the_cover_by_Schewe_et_al_with_the_use_of_Nano_Banana_2_0_2_2a408dbeb5.webp" alt="IOCB Prague: Cropped part of the cover by Schewe et al. with the use of Nano Banana 2.0: Full cover by Schewe et al. with the use of Nano Banana 2.0." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_IOCB_Prague_Cropped_part_of_the_cover_by_Schewe_et_al_with_the_use_of_Nano_Banana_2_0_2_2a408dbeb5.webp 117w," sizes="100vw" width="1620" height="2154">The difference appears to be largely controlled by molecular geometry. In maleic acid, the two carboxylic groups are held close together, creating favorable conditions for proton sharing. More flexible molecules can adopt conformations in which the groups are farther apart, while water molecules form strong hydrogen bonds with them and favor localized protons.However, the situation may be different inside proteins. When a carboxylic acid binds in the active site of an enzyme, its shape and position can be tightly constrained. Such an environment could bring the relevant groups close enough together to promote proton sharing and thereby influence enzymatic reactions.The study highlights an important distinction: proton sharing may be rare in freely hydrated molecules but could become important when biomolecules are held in the right geometry by enzymes. It also demonstrates that LJ-PES is a powerful tool for studying proton behavior in solutions. Its ultrafast and site-specific sensitivity could in future help researchers investigate proton sharing directly in more complex chemical and biological systems.<blockquote><h4>The original article</h4><h4><a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/jaaucr/article/6/6/3349/5084661/Proton-Sharing-in-Polycarboxylic-Acids-in-Aqueous">Proton Sharing in Polycarboxylic Acids in Aqueous Solution</a></h4>Lukáš Tomaník, Jiří Tůma, Gunnar Öhrwall, Ronny Golnak, Ngoc Lan Le Nguyen, Bruno Credidio, Harmanjot Kaur, Petr Slavíček, Bernd Winter, H. Christian Schewe<div>JACS Au, 2026, 6, 3349–3355</div><a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1021/jacsau.6c00377">https://doi.org/10.1021/jacsau.6c00377</a><h6>licenced under <a target="_blank" rel="noopener noreferrer" href="https://creativecommons.org/licenses/by/4.0/">CC-BY 4.0</a></h6></blockquote><h4>Abstract</h4>We investigate proton sharing in biologically relevant polycarboxylic acids in aqueous solutions using liquid-jet X-ray photoelectron spectroscopy. In contrast to techniques that record time-averaged proton positions, like nuclear magnetic resonance, photoelectron spectroscopy captures instantaneous proton distribution due to its ultrafast probing time scale. The method is, therefore, uniquely sensitive to the occurrence of proton sharing in an aqueous environment, as demonstrated here. We only observe significant proton sharing dynamics in maleic acid, where its monoanionic form shows a single, delocalized peak in the carbon 1s spectrum. Conversely, succinic acid, fumaric acid, malic acid, glutaric acid, and citric acid exhibit distinct peaks corresponding to separate, localized COOH and COO– groups, instead of shared protons. Our results reveal that intramolecular proton sharing in water is rather an exception for most biologically relevant polycarboxylic acids. This highlights the importance of enzyme-driven structural changes of polycarboxylic acids associated with proton sharing during metabolic processes.</div>

Proton sharing in polycarboxylic acids in aqueous solution

Autumn has already turned the leaves into vibrant shades, and with the end of the year approaching, we would like to thank you - before the first snowflakes arrive - for your trust, cooperation, and continued interest in our products and services.As a long-standing distributor of Thermo Scientific Finnpipette products, we know that the accuracy and reliability of laboratory results often begin with seemingly small details. Choosing the right pipette and tip is one of the first steps toward a successful analysis.That is why we have prepared an EXCLUSIVE offer to help you replenish your laboratory supplies at a more attractive price, while also thanking you for your continued cooperation and trust.<blockquote>EXCLUSIVE OFFER valid until the end of 2026<ul><li>10% off tips</li><li>10% off pipettes</li></ul>Enter the code “KAŠTANY” in your order or include it in your order e-mail.*For larger orders, an additional discount may be available.</blockquote><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/analytika_pipety_a_spicky_thermo_20c5943161.jpg" alt="analytika: Thermo Scientific Pipettes and Tips" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_analytika_pipety_a_spicky_thermo_20c5943161.jpg 146w," sizes="100vw" width="1500" height="1605"><h4>LIMITED OFFER WHILE STOCKS LAST</h4><h5>Everything ages. Precision remains.</h5>Finnpipette tips are proof of that.<h4>Tip Offer</h4><h5>FT 200 FLEX Tips</h5><ul><li>Code: L94060320</li><li>Pack size: 1,000 pcs</li><li>LOT: 20165B0</li><li>EXP: 20 June 2025</li><li>Price: CZK 1,761 (30% discount)</li></ul><h5>FT 1000 Tips</h5><ul><li>Code: L9401070</li><li>Pack size: 200 pcs/box</li><li>LOT: 20346A0</li><li>EXP: 20 December 2025</li><li>Price: CZK 464 (30% discount)</li></ul><h5>Labtip Blue Tips</h5><ul><li>Code: L94300250</li><li>Pack size: 60 pcs/rack</li><li>LOT: 21104B2</li><li>EXP: 20 April 2026</li><li>Price: CZK 206 (20% discount)</li></ul><h5>FT Filter Sterile 10 µL Tips</h5><ul><li>Code: L94052100</li><li>Pack size: 10 × 96 pcs/rack</li><li>LOT: 21136B1</li><li>EXP: 20 May 2026</li><li>Price: CZK 3,740 (20% discount)</li></ul><h4>Types of Thermo Fisher Scientific Pipette Tips</h4><h5>FILTERED</h5><ul><li>help prevent aerosol contamination,</li><li>suitable for PCR and critical samples.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/analytika_spicky_Thermo_s_filtrem_4eb500736e.jpg" alt="analytika: Thermo Fisher Scientific Filtered Tip" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_analytika_spicky_Thermo_s_filtrem_4eb500736e.jpg 245w," sizes="100vw" width="450" height="120"><h5>NON-FILTERED</h5><ul><li>economical and high quality,</li><li>suitable for routine samples.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/analytika_spicky_Thermo_bez_filtru_eea16c4ae1.jpg" alt="analytika: Thermo Fisher Scientific Non-Filtered Tips" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_analytika_spicky_Thermo_bez_filtru_eea16c4ae1.jpg 245w," sizes="100vw" width="442" height="147"><h5>EXTENDED-LENGTH</h5><ul><li>allow deeper access while helping reduce contamination risk,</li><li>suitable for tissue culture, media preparation, and tall laboratory vessels.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/analytika_spicky_Thermo_prodlouzene_2005b4125f.jpg" alt="analytika: Thermo Fisher Scientific Extended-Length Tip" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_analytika_spicky_Thermo_prodlouzene_2005b4125f.jpg 245w," sizes="100vw" width="407" height="118"><h5>MICRO</h5><ul><li>improve accuracy for low-volume samples and support efficient sample transfer,</li><li>suitable for critical and valuable samples and low-volume pipetting.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/analytika_spicky_Thermo_micro_9b5879704a.jpg" alt="analytika: Thermo Fisher Scientific Micro Tip" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_analytika_spicky_Thermo_micro_9b5879704a.jpg 245w," sizes="100vw" width="435" height="115"><h5>MACRO</h5><ul><li>improve accuracy when working with larger sample volumes,</li><li>can serve as an alternative to serological pipettes.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/analytika_spicky_Thermo_macro_8fb12684a7.jpg" alt="analytika: Thermo Fisher Scientific Macro Tip" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_analytika_spicky_Thermo_macro_8fb12684a7.jpg 245w," sizes="100vw" width="395" height="121"><h5>WIDE-BORE</h5><ul><li>the wide opening helps prevent cell lysis and improves accuracy when working with viscous solutions,</li><li>suitable for cell handling, macromolecular structures such as DNA, and highly viscous solutions.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/analytika_spicky_Thermo_siroky_otvor_9d6ad5537e.jpg" alt="analytika: Thermo Fisher Scientific Wide-Bore Tip" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_analytika_spicky_Thermo_siroky_otvor_9d6ad5537e.jpg 245w," sizes="100vw" width="397" height="127">

Equip Your Laboratory for Autumn at a Better Price

Article

Product

Science and research

Video

The main mission of the Faculty of Science is to create highly qualified experts in biology, chemistry, geography, geology and in other interdisciplinary fields. Its scientific and research effort aims to solve key problems concerned with the development of human society. Some of the priority long-term subjects are human health, the study of the function and prediction of the development of ecosystems and the biosphere, and the development of environmentally-friendly materials based on the utilization of renewable resources.

Přírodovědecká fakulta Univerzity Karlovy

The Institute of Organic Chemistry and Biochemistry of the Czech Academy of Sciences (IOCB Prague) is a leading scientific institution in the Czech Republic, recognized internationally. Its primary mission is basic research in the fields of chemical biology and medicinal chemistry, organic and material oriented chemistry, chemistry of natural compounds, biochemistry and molecular biology, physical chemistry, theoretical chemistry, and analytical chemistry. 

Institute of Organic Chemistry and Biochemistry of the Czech Academy of Sciences

Analytika is a Czech company that offers and produces certified reference materials (CRM) and (ultra)pure chemicals for quality control and quality assurance in laboratories, including accredited laboratories.

Our portfolio also includes pipettes and tips, digestors, PFA labware and other equipment for analytical laboratory and trace analysis.

ANALYTIKA

Shimadzu UV-2600i Plus, UV-2700i Plus UV-VIS-NIR Spectrophotometer

Shimadzu UV-2600i Plus and UV-2700i Plus spectrophotometers deliver high performance with flexible wavelength ranges, advanced optics, and efficient software control.

<h4>Versatile, Expandable Mid-Range UV Spectrophotometers for Diverse Applications</h4><section><section><section><ul><li>The UV-2600i Plus is a single monochromator system with an expandable wavelength range up to 1400 nm using an optional integrating sphere, making it adaptable for various needs.</li><li>The UV-2700i Plus is a double monochromator system capable of 8-Abs measurements, ideal for low transmittance samples.</li></ul>Both models come equipped with the intuitive Shimadzu LabSolutions UV-Vis software, ensuring data integrity and ease of use. Additionally, these spectrophotometers can be scheduled to shut down or enter sleep mode to save power and lamp life, and can automatically wake up at a specified time, enhancing efficiency. Elevate your analysis with these versatile and efficient spectrophotometers.<h3>Features</h3><h3>Perfect for a Wide Variety of Applications</h3>The functionality of the UV-2600i Plus /2700i Plus can be freely expanded to suit the measurement objective. By accommodating a wealth of accessories, the system can address any user’s applications and a variety of situations. Thanks to intuitive operations, anyone can easily obtain the data required.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Shimadzu_UV_2600i_Plus_UV_2700i_Plus_UV_VIS_NIR_Spectrophotometer_e5efa72f19.jpg" alt="Shimadzu UV-2600i Plus, UV-2700i Plus UV-VIS-NIR Spectrophotometer.jpg" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Shimadzu_UV_2600i_Plus_UV_2700i_Plus_UV_VIS_NIR_Spectrophotometer_e5efa72f19.jpg 245w," sizes="100vw" width="1040" height="561"><h5>Single monochromator UV-2600i Plus</h5>A key feature of the UV-2600i Plus equipped with a single monochromator is its measurement wavelength range. By using the optional ISR-2600Plus Integrating Sphere attachment, the measurement wavelength range can be extended from 220 nm to 1400 nm, significantly expanding its applications.Integrating Sphere Enables Measurements to 1400 nmThe UV-2600i Plus is equipped with Shimadzu's proprietary LO-RAY-LIGH™ grade diffraction grating, which achieves high efficiency and low stray light levels. By installing the ISR-2600Plus two-detector integrating sphere, the 300 nm to 1100 nm wavelength range of conventional models can be extended to 1400 nm. In addition, the UV-2600i achieves a significant noise reduction, and can accommodate measurements of solar cell anti-reflective films and polycrystalline silicon wafers.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Shimadzu_UV_2600i_Plus_UV_2700i_Plus_UV_VIS_NIR_Spectrophotometer_11_40f2d1e598.jpg" alt="Shimadzu UV-2600i Plus, UV-2700i Plus UV-VIS-NIR Spectrophotometer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Shimadzu_UV_2600i_Plus_UV_2700i_Plus_UV_VIS_NIR_Spectrophotometer_11_40f2d1e598.jpg 245w," sizes="100vw" width="365" height="228"><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Shimadzu_UV_2600i_Plus_UV_2700i_Plus_UV_VIS_NIR_Spectrophotometer_12_b71fa50d8f.jpg" alt="Shimadzu UV-2600i Plus, UV-2700i Plus UV-VIS-NIR Spectrophotometer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Shimadzu_UV_2600i_Plus_UV_2700i_Plus_UV_VIS_NIR_Spectrophotometer_12_b71fa50d8f.jpg 245w," sizes="100vw" width="1052" height="433"><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Shimadzu_UV_2600i_Plus_UV_2700i_Plus_UV_VIS_NIR_Spectrophotometer_13_6adf0a1565.jpg" alt="Shimadzu UV-2600i Plus, UV-2700i Plus UV-VIS-NIR Spectrophotometer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Shimadzu_UV_2600i_Plus_UV_2700i_Plus_UV_VIS_NIR_Spectrophotometer_13_6adf0a1565.jpg 245w," sizes="100vw" width="1052" height="466"><h4>Measures Slight Differences in Absorbance</h4>Equipped with a double monochromator that achieves ultra-low stray light levels, the UV-2700i Plus is optimal for measuring low transmittance samples, such as polarization films used for LCD panels. The UV-2700i Plus is capable of 8 Abs measurements, and can make accurate transmittance measurements to 1 part in 100 million, accommodating a variety of sample measurements.Achieves Ultra-Low Stray Light, Enabling 8-Abs MeasurementsIn the case of a device equipped with a general double monochromator, the absorbance that can be covered is about 5 to 6, but the UV-2700i Plus offers a range to 8 Abs, with a transmittance value of 0.000001 % (1 part in 100 million). This system achieves high-level absorbance measurements with incomparable precision. In addition to measuring even high-concentration samples as is, eliminating the need to dilute samples, the system can be applied to evaluating the transmission characteristics of polarization films. Wavelengths in the 400 nm to 650 nm range can be measured to 8 Abs.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Shimadzu_UV_2600i_Plus_UV_2700i_Plus_UV_VIS_NIR_Spectrophotometer_16_a08f314ee7.jpg" alt="Shimadzu UV-2600i Plus, UV-2700i Plus UV-VIS-NIR Spectrophotometer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Shimadzu_UV_2600i_Plus_UV_2700i_Plus_UV_VIS_NIR_Spectrophotometer_16_a08f314ee7.jpg 164w," sizes="100vw" width="511" height="485"><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Shimadzu_UV_2600i_Plus_UV_2700i_Plus_UV_VIS_NIR_Spectrophotometer_14_0d004ee208.jpg" alt="Shimadzu UV-2600i Plus, UV-2700i Plus UV-VIS-NIR Spectrophotometer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Shimadzu_UV_2600i_Plus_UV_2700i_Plus_UV_VIS_NIR_Spectrophotometer_14_0d004ee208.jpg 245w," sizes="100vw" width="1052" height="466">Sample Polarization Film MeasurementWith the rotating film holder (image below), two film samples can be set on the same optical axis. In this example, the polarization film is rotated in the plane, and the transmittance is measured when the film transmits and blocks light.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Shimadzu_UV_2600i_Plus_UV_2700i_Plus_UV_VIS_NIR_Spectrophotometer_1_5ff393836a.jpg" alt="Shimadzu UV-2600i Plus, UV-2700i Plus UV-VIS-NIR Spectrophotometer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Shimadzu_UV_2600i_Plus_UV_2700i_Plus_UV_VIS_NIR_Spectrophotometer_1_5ff393836a.jpg 163w," sizes="100vw" width="397" height="381"><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Shimadzu_UV_2600i_Plus_UV_2700i_Plus_UV_VIS_NIR_Spectrophotometer_2_f293cd4e0e.jpg" alt="Shimadzu UV-2600i Plus, UV-2700i Plus UV-VIS-NIR Spectrophotometer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Shimadzu_UV_2600i_Plus_UV_2700i_Plus_UV_VIS_NIR_Spectrophotometer_2_f293cd4e0e.jpg 184w," sizes="100vw" width="450" height="381"><h4>Enables Compliance with ER/ES Regulations and Stronger Data Management</h4><div><div>Compatible with Validation from PC SoftwareValidation can be implemented with PC software using UV validation software. In addition to simplifying daily inspections, this makes instrument performance checks and records management easier, enabling more secure regulatory compliance.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Shimadzu_UV_1900i_Plus_UV_VIS_spectrophotometer_18_1aa29e9a5d.jpg" alt="Shimadzu UV-2600i Plus, UV-2700i Plus UV-VIS-NIR Spectrophotometer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Shimadzu_UV_1900i_Plus_UV_VIS_spectrophotometer_18_1aa29e9a5d.jpg 232w," sizes="100vw" width="450" height="302"><ul><li>Inspection results can not only be printed but also saved to a file, so the results can be called up later for confirmation.</li><li>The inspection parameters can also be saved to separate files for periodic and routine inspections and then called up for use.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Shimadzu_UV_1900i_Plus_UV_VIS_spectrophotometer_19_7395087cba.jpg" alt="Shimadzu UV-2600i Plus, UV-2700i Plus UV-VIS-NIR Spectrophotometer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Shimadzu_UV_1900i_Plus_UV_VIS_spectrophotometer_19_7395087cba.jpg 232w," sizes="100vw" width="450" height="302"><ul><li>The user can select confirmation of instrument performance indicators as per JIS K 0115 General rules for molecular absorptiometric analysis, as well as the general test methods in the Japanese Pharmacopeia. (Order inspection jigs and reagents separately.)</li></ul>Note: Optional validation software is required to support the US Pharmacopeia and European Pharmacopeia.Support for FDA 21 CFR Part 11, PIC/S GMP Guidelines and Other Regulations and GuidelinesEnsuring the integrity of data (database management), including the user management, user authority management, and data audit trails required for compliance with FDA 21 CFR Part 11, PIC/S GMP guidelines, and other ER/ES regulations is possible.Option Software Assists with Regulation-Compliant ValidationUV validation software assists with performing the measurements and calculations required for validation. The software is included standard with UV-2600i/2700i models. In addition to routine inspections, it can also be used to perform instrument validation that is compliant with Japanese, US, and European pharmacopoeias.Assist FunctionThe instrument assists the user to ensure that measurements are performed using the correct procedure.*1<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Shimadzu_UV_1900i_Plus_UV_VIS_spectrophotometer_10_a30e63a8a4.jpg" alt="Shimadzu UV-2600i Plus, UV-2700i Plus UV-VIS-NIR Spectrophotometer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Shimadzu_UV_1900i_Plus_UV_VIS_spectrophotometer_10_a30e63a8a4.jpg 245w," sizes="100vw" width="1201" height="212">*1 This function can be enabled/disabled.Shutdown/Wakeup Functions<section><div>The instrument can be shut down, and put into sleep mode. Putting the instrument into sleep mode limits power consumption and helps preserve the lamp. After a long period of measurements, the instrument and software can automatically be shut down. After shutdown, the instrument can also be set to wake up automatically at a specified time. With this function, analysis can start the instant the user arrives at the laboratory.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Shimadzu_UV_2600i_Plus_UV_2700i_Plus_UV_VIS_NIR_Spectrophotometer_15_45b844fcc9.jpg" alt="Shimadzu UV-2600i Plus, UV-2700i Plus UV-VIS-NIR Spectrophotometer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Shimadzu_UV_2600i_Plus_UV_2700i_Plus_UV_VIS_NIR_Spectrophotometer_15_45b844fcc9.jpg 245w," sizes="100vw" width="781" height="258"></div></section><h3>Applications</h3><h4>Electricity, Electronics, and Optics</h4>Band Gap Measurements for Compound Semiconductors<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Shimadzu_UV_2600i_Plus_UV_2700i_Plus_UV_VIS_NIR_Spectrophotometer_3_03d8793fe0.jpg" alt="Shimadzu UV-2600i Plus, UV-2700i Plus UV-VIS-NIR Spectrophotometer: The diffuse reflection spectra for two types of compound semiconductors (red line: Culn0.5Ga0.5Se2, blue line: CulnSe2) used as solar cell materials were measured using the ISR-2600Plus integrating sphere. It is evident that the absorption edge (position where the reflectance drops) differs depending on the sample. This difference signifies a difference in the band gap* for these samples. (The samples were provided by Wada Laboratory, Faculty of Science and Technology, Ryukoku University.) The band gaps for the samples were calculated utilizing the Tauc method. The results obtained were 1.27 eV for Culn0.5Ga0.5Se2 (red line) and 0.99 eV for CulnSe2 (blue line). *The term band gap refers to the energy difference between the top of the valence band, which is full of electrons, and the bottom of the conduction band, which does not contain electrons." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Shimadzu_UV_2600i_Plus_UV_2700i_Plus_UV_VIS_NIR_Spectrophotometer_3_03d8793fe0.jpg 222w," sizes="100vw" width="519" height="364"><h4>Chemicals</h4>Thickness Measurements of Cling Films<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Shimadzu_UV_2600i_Plus_UV_2700i_Plus_UV_VIS_NIR_Spectrophotometer_4_a5e83ed3ad.jpg" alt="Shimadzu UV-2600i Plus, UV-2700i Plus UV-VIS-NIR Spectrophotometer: Undulating interference waveforms sometimes occur if light is passed through a film. The film thickness of a sample can be determined by using these interference waveforms. The figure shows transmittance data for a cling film. A clear interference waveform is produced. Utilizing optional film thickness measurement software, the film thickness is calculated as 10.4 μm. (Caution) The sample's refractive index must be entered for the film thickness calculation." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Shimadzu_UV_2600i_Plus_UV_2700i_Plus_UV_VIS_NIR_Spectrophotometer_4_a5e83ed3ad.jpg 222w," sizes="100vw" width="1038" height="728"><h4>Medicines</h4>Evaluating Thermal Stability (Tm) Analysis of Oligonucleotide Therapeutics<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Shimadzu_UV_2600i_Plus_UV_2700i_Plus_UV_VIS_NIR_Spectrophotometer_5_c80d107f38.jpg" alt="Shimadzu UV-2600i Plus, UV-2700i Plus UV-VIS-NIR Spectrophotometer: Oligonucleotide therapeutics samples (9 to 60 M) were analyzed using TMSPC™-8i and 1 mm optical path length cells. Since UV-2600i Plus /2700i Plus can measure over a wide dynamic range, it is possible to perform a thermal stability analysis of nucleic acid drugs by obtaining the Tm value from the melting curve." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Shimadzu_UV_2600i_Plus_UV_2700i_Plus_UV_VIS_NIR_Spectrophotometer_5_c80d107f38.jpg 222w," sizes="100vw" width="1038" height="728"><h4>Construction</h4>Window Glass Transmission Measurements<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Shimadzu_UV_2600i_Plus_UV_2700i_Plus_UV_VIS_NIR_Spectrophotometer_6_41420fd6ba.jpg" alt="Shimadzu UV-2600i Plus, UV-2700i Plus UV-VIS-NIR Spectrophotometer: Two types of window glass were measured utilizing the ISR-2600Plus integrating sphere. The sample shown by the red line is highly transparent to near-infrared light at 800 nm or more. The sample shown by the blue line, however, is apparently not very transparent to near-infrared light." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Shimadzu_UV_2600i_Plus_UV_2700i_Plus_UV_VIS_NIR_Spectrophotometer_6_41420fd6ba.jpg 222w," sizes="100vw" width="519" height="364"><h4>Cosmetics</h4>Measurement of the Ultra Violet Protection Factor Assigned to Ultraviolet Protection Clothes<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Shimadzu_UV_2600i_Plus_UV_2700i_Plus_UV_VIS_NIR_Spectrophotometer_7_528f748880.jpg" alt="Shimadzu UV-2600i Plus, UV-2700i Plus UV-VIS-NIR Spectrophotometer: The UV protection provided by clothes and an umbrella were analyzed by an ISR-2600Plus integrating sphere accessory. The transmittance spectrum of the umbrella (green) shows that very little UV radiation transmits through the umbrella. In regards to the clothing, the black areas block more UV radiation than do the white areas." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Shimadzu_UV_2600i_Plus_UV_2700i_Plus_UV_VIS_NIR_Spectrophotometer_7_528f748880.jpg 159w," sizes="100vw" width="474" height="465"><h4>Textiles</h4>Total Transmittance Spectrum of CNF<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Shimadzu_UV_2600i_Plus_UV_2700i_Plus_UV_VIS_NIR_Spectrophotometer_8_adb8c09844.jpg" alt="Shimadzu UV-2600i Plus, UV-2700i Plus UV-VIS-NIR Spectrophotometer: An ISR-2600Plus integrating sphere was used to measure the total transmittance spectrum of cellulose nanofiber (CNF). Depending on the raw materials used, spectra can vary, transparency can vary, and spectral tendencies in the ultraviolet region can vary." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Shimadzu_UV_2600i_Plus_UV_2700i_Plus_UV_VIS_NIR_Spectrophotometer_8_adb8c09844.jpg 222w," sizes="100vw" width="519" height="364"><h4>Life Sciences</h4>DNA and Protein Measurements<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Shimadzu_UV_2600i_Plus_UV_2700i_Plus_UV_VIS_NIR_Spectrophotometer_9_40a6f16a7b.jpg" alt="Shimadzu UV-2600i Plus, UV-2700i Plus UV-VIS-NIR Spectrophotometer: The red and blue lines are the absorption spectra for dsDNA and BSA (bovine serum albumin), respectively. The concentration values are 45 ng/μL for dsDNA and 2.2 mg/mL for BSA." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Shimadzu_UV_2600i_Plus_UV_2700i_Plus_UV_VIS_NIR_Spectrophotometer_9_40a6f16a7b.jpg 222w," sizes="100vw" width="519" height="364"><h4>Foods</h4>Vitamin Measurements<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Shimadzu_UV_2600i_Plus_UV_2700i_Plus_UV_VIS_NIR_Spectrophotometer_10_c7f5e10b1e.jpg" alt="Shimadzu UV-2600i Plus, UV-2700i Plus UV-VIS-NIR Spectrophotometer: This shows the absorption spectra for riboflavin (vitamin B2). The sample concentrations are, in order from the highest absorbance, 0.08, 0.04, 0.02, and 0.01 mg/mL." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Shimadzu_UV_2600i_Plus_UV_2700i_Plus_UV_VIS_NIR_Spectrophotometer_10_c7f5e10b1e.jpg 222w," sizes="100vw" width="1038" height="728"></div></div></section></section></section>

Thermo Scientific Antaris II FT-NIR Analyzer

The Thermo Scientific Antaris™ II FT-NIR Analyzer enables fast, non-destructive analysis without sample preparation, supporting quality control, process monitoring, and method transfer.

The Thermo Scientific Antaris™ II FT-NIR Analyzer is a Fourier Transform Near-Infrared (FT-NIR) analyzer designed for quality control, process monitoring, and method development in industrial environments. Its rugged design and intuitive operation enable reliable analysis directly on the production floor, in warehouses, and in laboratory.The system combines analytical performance with flexibility, supporting seamless method development, transfer, and routine operation. The Antaris II platform ensures reproducible results regardless of configuration, user, or environment, making it ideal for standardized workflows and global deployments.FT-NIR technology enables fast, non-destructive analysis without sample preparation, significantly improving efficiency and reducing operational costs.<h3>Key Features</h3><ul><li>FT-NIR spectroscopy for rapid, non-destructive analysis</li><li>Excellent method transferability between instruments</li><li>Rugged industrial design for harsh environments</li><li>Internal HeNe laser calibration – no external calibration required</li><li>Stable, frictionless Michelson interferometer</li><li>Automated workflows and SOP-driven operation</li><li>Fully compliant with regulated environments (GMP, 21 CFR Part 11)</li><li>Low cost of ownership and high reliability</li></ul><h3>Sampling Capabilities</h3>The system offers flexible sampling configurations that can be adapted to different material types and application requirements.<ul><li>Reflectance measurements: solids, powders, pastes</li><li>Transmission measurements: liquids, films, tablets</li><li>Fiber optics for in-line and remote measurements</li><li>Integrating sphere for diffuse reflectance</li><li>Tablet analyzer module</li><li>Automation options (up to ~120 samples per hour)</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Antaris_II_FT_NIR_Analyzer_29c4d2264a.jpg" alt="Thermo Scientific Antaris II FT-NIR Analyzer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Antaris_II_FT_NIR_Analyzer_29c4d2264a.jpg 245w," sizes="100vw" width="1584" height="314"><h3>Software and Data Analysis</h3>Support for multiple software platforms depending on application (routine analysis, method development, chemometrics)<ul><li>RESULT software for routine operation and GMP environments</li><li>OMNIC software for advanced spectral analysis</li><li>The Unscrambler software for chemometric modeling and data interpretation</li></ul><h3>Advantages of FT-NIR Technology</h3><ul><li>No sample preparation required</li><li>Non-destructive analysis</li><li>Fast measurement times</li><li>High accuracy and reproducibility</li><li>Lower cost compared to wet chemistry and LC methods</li><li>Suitable for at-line and in-line analysis</li></ul><h3>Technical Specifications</h3><ul><li>Analyzer Type: FT-NIR (Fourier Transform Near-Infrared)</li><li>Spectral Range: 12,000 to 3,800 cm⁻¹ (833–2630 nm)</li><li>Resolution: 4 cm⁻¹ (standard), 2 cm⁻¹ (optional)</li><li>Detector: InGaAs</li><li>Source: Long-life halogen NIR source</li><li>Interferometer: Michelson, frictionless design</li><li>Wavenumber Accuracy: ±0.03 cm⁻¹</li><li>Repeatability: &lt;0.006 cm⁻¹</li><li>Reproducibility (system-to-system): &lt;0.05 cm⁻¹</li><li>Operating Temperature: 15–35 °C</li><li>Dimensions (W × D × H): 40.6 × 68.5 × 33 cm</li><li>Weight: 47.7 kg</li></ul><h3>Typical Applications</h3><ul><li>Pharmaceutical industry</li><li>Food and beverage analysis</li><li>Chemical industry</li><li>Polymer and materials analysis</li><li>Raw material identification</li><li>Process analytical technology (PAT, at-line, in-line)</li></ul>

Thermo Scientific Antaris MX FT-NIR Process Analyzer

The Thermo Scientific Antaris™ MX FT-NIR Process Analyzer enables real-time on-line and in-line monitoring, improving product quality, yield, and process efficiency.

The Thermo Scientific Antaris™ MX FT-NIR Process Analyzer is a Fourier Transform Near-Infrared (FT-NIR) analyzer designed for real-time on-line and in-line monitoring of industrial manufacturing processes. It enables continuous measurement of critical quality parameters directly in the process, allowing rapid response to deviations and improved production efficiency.Using fiber-optic technology and multi-point monitoring, the system can simultaneously measure multiple locations within a process using a single analyzer. This eliminates time delays between sampling points and provides true time-aligned data, which is essential for dynamic processes.The Antaris MX is built for demanding production environments, offering high reliability, reproducibility, and seamless integration into process control systems.<h3>Key Features</h3><ul><li>FT-NIR spectroscopy for real-time process analysis</li><li>Simultaneous multi-point monitoring with a single analyzer</li><li>Fiber-optic sampling for remote measurements</li><li>ParaLux™ technology with no mechanical channel switching</li><li>Continuous internal referencing (background correction)</li><li>High stability, sensitivity, and fast response time</li><li>Rugged design for industrial environments</li><li>Low cost of ownership and high system uptime</li></ul><h3>Sampling Capabilities</h3><ul><li>Fiber-optic probes for in-line, on-line, and at-line applications</li><li>Reflectance, transmission, and transflectance measurements</li><li>Simultaneous monitoring of up to 4 process points</li><li>Manual and fully automated sampling</li><li>Specialized probes for fermentation, drying, and slurry processes</li><li>Retractable probes with automated cleaning options</li></ul><h3>Software and Data Analysis</h3><ul><li>RESULT software for workflow control and automation</li><li>TQ Analyst™ for chemometric modeling and calibration transfer</li><li>OPC communication for integration with SCADA/DCS systems</li><li>Compatibility with LIMS, ERP, and tracking systems (RFID, barcode)</li><li>Automated pass/fail decision-making</li></ul><h3>Advantages of FT-NIR in Process Analysis</h3><ul><li>Real-time process feedback</li><li>Non-destructive analysis without sample preparation</li><li>Improved product yield and quality</li><li>Reduced operational costs</li><li>Elimination of delays between measurement and decision</li><li>Support for fully automated process control</li></ul><h3>Technical Specifications</h3><ul><li>Analyzer Type: FT-NIR (Fourier Transform Near-Infrared)</li><li>Spectral Range: 12,000 to 3,800 cm⁻¹ (833–2500 nm)</li><li>Resolution: 4 cm⁻¹ (standard), 2 cm⁻¹ (optional)</li><li>Detector: InGaAs</li><li>Source: Long-life halogen NIR source</li><li>Interferometer: Michelson, frictionless design</li><li>Wavenumber Accuracy: ±0.1 cm⁻¹</li><li>Repeatability: &lt;0.006 cm⁻¹</li><li>Reproducibility: &lt;0.05 cm⁻¹</li><li>Operating Temperature: 15–35 °C</li><li>Dimensions: 48.2 × 40.6 × 24.7 cm</li><li>Weight: 25.8 kg</li></ul><h3>Typical Applications</h3><ul><li>Real-time process monitoring (on-line, in-line)</li><li>Raw material identification and control</li><li>Pharmaceutical and chemical industries</li><li>Fermentation and reaction monitoring</li><li>Quality control in production</li><li>Mobile and at-line analysis</li></ul>

Products from category NIR spectrometers - page 1

Related content

Proton sharing in polycarboxylic acids in aqueous solution

Equip Your Laboratory for Autumn at a Better Price

Researchers from Charles University, Prague, Have Developed a New Photocathode for Efficient Conversion of CO2 into Ethanol