Analysis of characteristic flavor compounds in coffee peels subjected to different thermal processing treatments based on GC–IMS and HS-SPME–GC–MS combined with chemical pattern recognition

Forced degradation analysis of recombinant adeno-associated virus serotype 8 based on analytical anion exchange chromatography coupled to orthogonal characterization

Combining elemental analysis and molecular techniques to characterize Ancient Egyptian mummification balms

Food

Scientific article

Science and research

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

KNAUER Eurosil Bioselect 300 C18 HPLC Columns (USP L1)

Eurosil Bioselect C18 has been specifically developed for the determination and purification of peptides, proteins, and oligonucleotides up to a molecular weigth of approximately 5 kDa.

Analytical wide pore phase for the determination of biomolecules bigger than 2000 Da​Eurosil Bioselect C18 has been specifically developed for the determination and purification of peptides, proteins, and oligonucleotides up to a molecular weigth of approximately 5 kDa.<h5>Properties</h5><ul><li>Ultra pure, spherical wide pore HPLC phase based on silica gel</li><li>Unpolar, monomeric C18 (Octadecyl) modification, endcapped</li><li>7.5 % carbon content (conventional endcapping)</li><li>Separation mechanism: hydrophobic interaction</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_C18_Endcapped_standard_edd2523aca.webp" alt="KNAUER: C18 Endcapped standard" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_C18_Endcapped_standard_edd2523aca.webp 234w," sizes="100vw" width="688" height="458"><h5>Recommended application areas</h5><ul><li>Hydrophilic biomolecules, peptides, peptide mapping after enzymatic digestion</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Eurosil_Bioselect_Phases_98acc32d0e.jpg" alt="KNAUER: Eurosil Bioselect - Phases and recommended sizes of molecules" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Eurosil_Bioselect_Phases_98acc32d0e.jpg 245w," sizes="100vw" width="1385" height="778"><blockquote>Tip: Caused by the larger pore size of 300 Å, Eurosil Bioselect phases are not as mechanical stable as classical silica gel phases with up to 150 Å and should not be used above 200 bar pressure.</blockquote><h3>KNAUER Wide pore HPLC columns</h3>For enhanced resolution, capacity and recovery of proteins and other biomolecules<ul><li>Material: Silica or polymer particles</li><li>Separation Ranges: 2–100 kDa</li><li>Column Brands: Eurosil Bioselect or AppliChrom®</li><li>Particle sizes: 3–10 µm</li><li>Pore Sizes: 300 or 100–1000 Å</li><li>Specific surface: 90 ± 5 m2/g</li><li>Pore volume: 0.8 ml/g</li><li>Density: 450 g/l</li><li>Applications: Peptides exceeding approximately 50 amino acids and oligonucleotides greater than 25 residues</li><li>Customize: Bioanalysis requires a lot of flexibility in the pore size, the pH range, the temperatures and the solvents used. To achieve this, we cross phase limits.</li></ul><h4>Characteristics&nbsp;</h4><ul><li>Eurosil Bioselect columns are available in 4 modifications, useful for a wide range of separation tasks involving large molecules up to 100 000 Da.</li><li>Strict manufacturing procedures ensure a very narrow pore size distribution.</li><li>Interfering anions or heavy metal ions on the silica surface are not present in Eurosil Bioselect columns because only ultra pure silica gel and high quality chemical modifications are employed.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Eurosil_Bioselect_85cfc2d201.jpg" alt="KNAUER: Eurosil Bioselect" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Eurosil_Bioselect_85cfc2d201.jpg 222w," sizes="100vw" width="1114" height="782"><h4>Separation mechanism of Eurosil Bioselect</h4>To separate larger molecules, they need to freely access the interior of the pores of the packing material. Therefore, the analytes’ diameter must be smaller than the average pore diameter.&nbsp;For higher molecular weight solutes, the use of lower pore size materials (60-120 Å) as typically used for the analysis of small molecules may result restricted diffusion in the material´s pores and therewith reduced column efficiency.&nbsp;<h4>Modifications</h4>The recommended modification of Eurosil Bioselect depends on the molecular weight of the analytes.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Eurosil_Bioselect_chemical_modifications_1fd5d87f7b.jpg" alt="KNAUER: Eurosil Bioselect - chemical modifications" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Eurosil_Bioselect_chemical_modifications_1fd5d87f7b.jpg 245w," sizes="100vw" width="955" height="505"> &nbsp;

KNAUER Eurosil Bioselect 300 C18A HPLC Columns (USP L1)

Eurosil Bioselect C18A has been specifically developed for the determination and purification of peptides, proteins, and oligonucleotides up to a molecular weigth of approximately 5 kDa.

Analytical wide pore phase for the determination of biomolecules up to 5000 Da​Eurosil Bioselect C18A has been specifically developed for the determination and purification of peptides, proteins, and oligonucleotides up to a molecular weigth of approximately 5 kDa.<h5>Properties</h5><ul><li>Ultra pure, spherical wide pore HPLC phase based on silica gel</li><li>Unpolar, monomeric C18 (Octadecyl) modification, endcapped</li><li>7 % carbon content (hydrophilic endcapping)</li><li>Separation mechanism: hydrophobic interaction</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_C18_A_6f4b0c3063.webp" alt="KNAUER: C18A" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_C18_A_6f4b0c3063.webp 245w," sizes="100vw" width="690" height="428"><h5>Recommended application areas</h5><ul><li>Hydrophilic and polar biomolecules, peptides, very polar biomolecules separated with 100 % aqueous eluents</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Eurosil_Bioselect_Phases_98acc32d0e.jpg" alt="KNAUER: Eurosil Bioselect - Phases and recommended sizes of molecules" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Eurosil_Bioselect_Phases_98acc32d0e.jpg 245w," sizes="100vw" width="1385" height="778"><h3>KNAUER Wide pore HPLC columns</h3>For enhanced resolution, capacity and recovery of proteins and other biomolecules<ul><li>Material: Silica or polymer particles</li><li>Separation Ranges: 2–100 kDa</li><li>Column Brands: Eurosil Bioselect or AppliChrom®</li><li>Particle sizes: 3–10 µm</li><li>Pore Sizes: 300 or 100–1000 Å</li><li>Specific surface: 90 ± 5 m2/g</li><li>Pore volume: 0.8 ml/g</li><li>Density: 450 g/l</li><li>Applications: Peptides exceeding approximately 50 amino acids and oligonucleotides greater than 25 residues</li><li>Customize: Bioanalysis requires a lot of flexibility in the pore size, the pH range, the temperatures and the solvents used. To achieve this, we cross phase limits.</li></ul><h4>Characteristics&nbsp;</h4><ul><li>Eurosil Bioselect columns are available in 4 modifications, useful for a wide range of separation tasks involving large molecules up to 100 000 Da.</li><li>Strict manufacturing procedures ensure a very narrow pore size distribution.</li><li>Interfering anions or heavy metal ions on the silica surface are not present in Eurosil Bioselect columns because only ultra pure silica gel and high quality chemical modifications are employed.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Eurosil_Bioselect_85cfc2d201.jpg" alt="KNAUER: Eurosil Bioselect" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Eurosil_Bioselect_85cfc2d201.jpg 222w," sizes="100vw" width="1114" height="782"><h4>Separation mechanism of Eurosil Bioselect</h4>To separate larger molecules, they need to freely access the interior of the pores of the packing material. Therefore, the analytes’ diameter must be smaller than the average pore diameter.&nbsp;For higher molecular weight solutes, the use of lower pore size materials (60-120 Å) as typically used for the analysis of small molecules may result restricted diffusion in the material´s pores and therewith reduced column efficiency.&nbsp;<h4>Modifications</h4>The recommended modification of Eurosil Bioselect depends on the molecular weight of the analytes.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Eurosil_Bioselect_chemical_modifications_1fd5d87f7b.jpg" alt="KNAUER: Eurosil Bioselect - chemical modifications" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Eurosil_Bioselect_chemical_modifications_1fd5d87f7b.jpg 245w," sizes="100vw" width="955" height="505"> &nbsp;

KNAUER AppliChrom® ABOA SuperOH-P Columns for GPC/SEC

Optimally suited for aqueous SEC separations. Aqueous and highly hydrophilic polymeric base material.

AppliChrom® SEC columns for biopolymers and aqueous polymersOptimally suited for aqueous SEC separations. Aqueous and highly hydrophilic polymeric base material. Polymethacrylate resin, cross-linked with polyhydroxylated ether (surface contains some residual carboxyl functional groups)<h4>Properties:</h4><ul><li>Particle size: 7 µm for pore sizes up to 300 Å and 10 µm for pore sizes over 350 Å and the multipore columns</li><li>Stable between: pH 2–12.5</li><li>Pressure stable: for 30–70 bar depending on pore size</li><li>Temperature stability: between 10–85 °C</li><li>Flow rate: maximum 1 ml/min</li><li>Low column bleed for low detector noise</li><li>Large pore volume for optimal resolution</li><li>Individual pore sizes for individual molecular weight ranges</li><li>Multi-pore technology for a wide range of molecular sizes</li><li>Increased lifetime of SEC columns through combination of proprietary particle and packing technology</li><li>Recommended eluents: H₂O, buffers</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Appli_Chrom_ABOA_Super_OH_P_Pore_sizes_4cb72c682d.jpg" alt="KNAUER: AppliChrom® ABOA SuperOH-P - Pore sizes" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Appli_Chrom_ABOA_Super_OH_P_Pore_sizes_4cb72c682d.jpg 216w," sizes="100vw" width="1478" height="1071"><h4>Applications</h4>Water soluble (bio)polymers up to 40 000 kDa:<ul><li>proteins, oligonucleotides, virus, heparin, polyethylene oxide (PEO), polyethylene glycol (PEG), pullulan, maltodextrin, inulin, pectine, polycarboxylate ethers, gelatine, dextranes, polyacrylamide (PAM), PEGylated proteins acrylate dispersions</li></ul><h3>GPC &amp; SEC Columns</h3>GPC &amp; SEC systems offer solutions for various applications and laboratoriesGel permeation chromatography (GPC) and size exclusion chromatography (SEC) separate analytes by size using special columns with a porous matrix. The basic separation principle is based on the fact that smaller molecules penetrate these pores more strongly and therefore move more slowly through the matrix than larger molecules. GPC/SEC is often used as gentle and powerful purification technique or for quality control in research and development. Typical target molecules are polymers, dissolved in organic solvents for GPC, and macro biomolecules like proteins, antibodies or polysaccharides, dissolved in aqueous eluents for SEC.Separation is facilitated by selecting optimal particle and pore sizes. Therefore we offer a wide range of pore sizes (35, 100, 150, 250, 350, 500, 1000, 1500, 10E5, 10E6, 10E7 Å) and several particle sizes (5, 7, 10, 12, 20 µm) as a choice to customize for every application task.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Size_Exclusion_principle_2a432edcc1.webp" alt="KNAUER: Size Exclusion - principle" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Size_Exclusion_principle_2a432edcc1.webp 228w," sizes="100vw" width="1024" height="700"><h3>KNAUER AppliChrom® ABOA columns for aqueous SEC, organic GPC, and special applications</h3><ul><li>AppliChrom® ABOA StyDiViBe Series GPC-columns for GPC analysis of organic molecules using THF, toluene, chloroform.</li><li>AppliChrom ABOA SuperOH-P Series for aqueous GPC/SEC-analysis of mainly neutral and anionic polymers like heparins, polysaccharides, PEO, PEG,....</li><li>AppliChrom® ABOA DMSO-Phil-P Series for DMSO GPC/SEC analysis (humic substances, UF/MUF-glue, p-NIPA, many polycondensates, protein from pea or leguminosae,...)</li><li>AppliChrom® ABOA DMAc-Phil-P Series for GPC/ SEC analysis in DMAc, DMF, NMP. Good for many medium polar substances, polyoxazolines, lignin,...</li><li>AppliChrom® ABOA Cat-Phil-P Series for aqueous GPC/SEC-analysis of special aminic and polycationic polymers like p-DADMAc, PEI/ polyethylenimin, chitosan, copolymers with polyaminofunctions, but also useful for polyanions or neutral polymers like heparin or PEO/PEG, dextran or pullulan.</li><li>Seperation Ranges: 100–50 000 000 Da</li></ul><h4>You decide between classical GPC/SEC columns with conventional mixed pore technology or AppliChrom® BPT technology:</h4>Separate oligomers and polymers with the new GPC media line from AppliChrom® BPT synthesis technology for large range, high resolution separations with increased accuracy in calibration (patent pending).<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg" alt="KNAUER: AppliChrom® ABOA columns." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg 245w," sizes="100vw" width="1379" height="718">

KNAUER AppliChrom® ABOA RPpetide GPC Columns for RP

AppliChrom® Polymer based reversed phase (RP) columns to reversed phase (RP) separation with orthogonal selectivity to silica based columns.

AppliChrom® Polymer based reversed phase (RP) columns<h4>Properties:</h4><ul><li>Rigid, spherical styrenedivinylbenzene copolymer&nbsp;</li><li>Particle sizes between: 3 to 30 μm</li><li>Pore sizes of: 100–1 000 Å</li><li>Reversed Phase (RP) separation with orthogonal selectivity to silica based columns</li><li>Improved chemical stability</li><li>Stable between: pH 1.5–14</li><li>Temperature stability: 10–90 °C</li><li>Stable towards pressures: up to 150 bar</li><li>Low backpressure with high plate counts, ideal for preparative applications</li><li>Low column bleed for low detector noise</li><li>Up and down scaling ensured beteween analytical RP-HPLC and preparative process chromatography</li><li>Recommended eluents: &nbsp;H₂O/ACN or H₂O/MeOH with up to 1 % TFA, FA or NaOH additive</li></ul><h4>Applications</h4><ul><li>Polar peptides, proteins or vitamins, hydrophobic amines</li></ul><h3>GPC &amp; SEC Columns</h3>GPC &amp; SEC systems offer solutions for various applications and laboratoriesGel permeation chromatography (GPC) and size exclusion chromatography (SEC) separate analytes by size using special columns with a porous matrix. The basic separation principle is based on the fact that smaller molecules penetrate these pores more strongly and therefore move more slowly through the matrix than larger molecules. GPC/SEC is often used as gentle and powerful purification technique or for quality control in research and development. Typical target molecules are polymers, dissolved in organic solvents for GPC, and macro biomolecules like proteins, antibodies or polysaccharides, dissolved in aqueous eluents for SEC.Separation is facilitated by selecting optimal particle and pore sizes. Therefore we offer a wide range of pore sizes (35, 100, 150, 250, 350, 500, 1000, 1500, 10E5, 10E6, 10E7 Å) and several particle sizes (5, 7, 10, 12, 20 µm) as a choice to customize for every application task.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Size_Exclusion_principle_2a432edcc1.webp" alt="KNAUER: Size Exclusion - principle" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Size_Exclusion_principle_2a432edcc1.webp 228w," sizes="100vw" width="1024" height="700"><h3>KNAUER AppliChrom® ABOA columns for aqueous SEC, organic GPC, and special applications</h3><ul><li>AppliChrom® ABOA StyDiViBe Series GPC-columns for GPC analysis of organic molecules using THF, toluene, chloroform.</li><li>AppliChrom ABOA SuperOH-P Series for aqueous GPC/SEC-analysis of mainly neutral and anionic polymers like heparins, polysaccharides, PEO, PEG,....</li><li>AppliChrom® ABOA DMSO-Phil-P Series for DMSO GPC/SEC analysis (humic substances, UF/MUF-glue, p-NIPA, many polycondensates, protein from pea or leguminosae,...)</li><li>AppliChrom® ABOA DMAc-Phil-P Series for GPC/ SEC analysis in DMAc, DMF, NMP. Good for many medium polar substances, polyoxazolines, lignin,...</li><li>AppliChrom® ABOA Cat-Phil-P Series for aqueous GPC/SEC-analysis of special aminic and polycationic polymers like p-DADMAc, PEI/ polyethylenimin, chitosan, copolymers with polyaminofunctions, but also useful for polyanions or neutral polymers like heparin or PEO/PEG, dextran or pullulan.</li><li>Seperation Ranges: 100–50 000 000 Da</li></ul><h4>You decide between classical GPC/SEC columns with conventional mixed pore technology or AppliChrom® BPT technology:</h4>Separate oligomers and polymers with the new GPC media line from AppliChrom® BPT synthesis technology for large range, high resolution separations with increased accuracy in calibration (patent pending).<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg" alt="KNAUER: AppliChrom® ABOA columns." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg 245w," sizes="100vw" width="1379" height="718">

KNAUER AppliChrom® ABOA VivoSep SEC Columns

AppliChrom® SEC columns for water soluble (bio)polymers are multi hydrophilic layered SEC media for highest efficiency and low interaction.

AppliChrom® SEC columns for water soluble (bio)polymers<h4>Properties:</h4><ul><li>Multi hydrophilic layered SEC media for highest efficiency and low interaction</li><li>Available seperation ranges: from small molecules up to 5 500 kDa</li><li>Temperature stability: 10-90 °C</li><li>Stable between: pH 2–10</li><li>Pressure stability: up to 200 bar</li><li>Simple adaptation from HPLC to SEC with stainless steel instruments</li><li>Versatile tool for accurate protein molecular weight or size determination</li><li>Low column bleed for low detector noise</li><li>Increased lifetime of SEC columns through combination of proprietary particle and packing technology</li><li>Recommended eluents: H₂O, buffers</li></ul><h4>Applications</h4><ul><li>Water soluble proteins, humic substances</li></ul><h3>GPC &amp; SEC Columns</h3>GPC &amp; SEC systems offer solutions for various applications and laboratoriesGel permeation chromatography (GPC) and size exclusion chromatography (SEC) separate analytes by size using special columns with a porous matrix. The basic separation principle is based on the fact that smaller molecules penetrate these pores more strongly and therefore move more slowly through the matrix than larger molecules. GPC/SEC is often used as gentle and powerful purification technique or for quality control in research and development. Typical target molecules are polymers, dissolved in organic solvents for GPC, and macro biomolecules like proteins, antibodies or polysaccharides, dissolved in aqueous eluents for SEC.Separation is facilitated by selecting optimal particle and pore sizes. Therefore we offer a wide range of pore sizes (35, 100, 150, 250, 350, 500, 1000, 1500, 10E5, 10E6, 10E7 Å) and several particle sizes (5, 7, 10, 12, 20 µm) as a choice to customize for every application task.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Size_Exclusion_principle_2a432edcc1.webp" alt="KNAUER: Size Exclusion - principle" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Size_Exclusion_principle_2a432edcc1.webp 228w," sizes="100vw" width="1024" height="700"><h3>KNAUER AppliChrom® ABOA columns for aqueous SEC, organic GPC, and special applications</h3><ul><li>AppliChrom® ABOA StyDiViBe Series GPC-columns for GPC analysis of organic molecules using THF, toluene, chloroform.</li><li>AppliChrom ABOA SuperOH-P Series for aqueous GPC/SEC-analysis of mainly neutral and anionic polymers like heparins, polysaccharides, PEO, PEG,....</li><li>AppliChrom® ABOA DMSO-Phil-P Series for DMSO GPC/SEC analysis (humic substances, UF/MUF-glue, p-NIPA, many polycondensates, protein from pea or leguminosae,...)</li><li>AppliChrom® ABOA DMAc-Phil-P Series for GPC/ SEC analysis in DMAc, DMF, NMP. Good for many medium polar substances, polyoxazolines, lignin,...</li><li>AppliChrom® ABOA Cat-Phil-P Series for aqueous GPC/SEC-analysis of special aminic and polycationic polymers like p-DADMAc, PEI/ polyethylenimin, chitosan, copolymers with polyaminofunctions, but also useful for polyanions or neutral polymers like heparin or PEO/PEG, dextran or pullulan.</li><li>Seperation Ranges: 100–50 000 000 Da</li></ul><h4>You decide between classical GPC/SEC columns with conventional mixed pore technology or AppliChrom® BPT technology:</h4>Separate oligomers and polymers with the new GPC media line from AppliChrom® BPT synthesis technology for large range, high resolution separations with increased accuracy in calibration (patent pending).<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg" alt="KNAUER: AppliChrom® ABOA columns." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg 245w," sizes="100vw" width="1379" height="718">

KNAUER AppliChrom® ABOA Cat-Phil SEC Columns

Interaction-free pure GPC & SEC base material with focus on polycationic, polyelectrolytic or funktional amine analytes

AppliChrom® SEC columns for neutral, anionic and additional cationic polymers<h4>Properties:</h4><ul><li>Interaction-free pure GPC &amp; SEC base material with focus on polycationic, polyelectrolytic or funktional amine analytes</li><li>No salt addition is needed to surpress surface adsorption</li><li>No ion exclusion phenomena</li><li>Possible to be used in universal calibration &amp; accurate molecular weight determination even for small polycationic molecules</li><li>Temperature stability between: 10–90 °C</li><li>Stable with: pH 2–10</li><li>Simple, reliable and robust GPC &amp; SEC calibration from dextrans, pullulans et al.</li><li>Low column bleed for low detector gain for improved refractive index, light scattering or viscosity detection</li><li>Large volume and optimized mass transfer for polymers with optimized resolution</li><li>Low cost due to long column lifetime - result of the combination of optimized particle and packing technology</li><li>Recommended eluents: H₂O, buffers</li></ul><h4>Applications</h4>Water soluble analytes like:<ul><li>polycations, polyamines (chitosanes), polyethylenoxides, polysaccharides, polyanions (heparins, pectins), polyethylene oxide (PEO), polyethylene glycol (PEG), Ppolyethyleneimins (PEI), polyvinylimidazole</li></ul><h3>GPC &amp; SEC Columns</h3>GPC &amp; SEC systems offer solutions for various applications and laboratoriesGel permeation chromatography (GPC) and size exclusion chromatography (SEC) separate analytes by size using special columns with a porous matrix. The basic separation principle is based on the fact that smaller molecules penetrate these pores more strongly and therefore move more slowly through the matrix than larger molecules. GPC/SEC is often used as gentle and powerful purification technique or for quality control in research and development. Typical target molecules are polymers, dissolved in organic solvents for GPC, and macro biomolecules like proteins, antibodies or polysaccharides, dissolved in aqueous eluents for SEC.Separation is facilitated by selecting optimal particle and pore sizes. Therefore we offer a wide range of pore sizes (35, 100, 150, 250, 350, 500, 1000, 1500, 10E5, 10E6, 10E7 Å) and several particle sizes (5, 7, 10, 12, 20 µm) as a choice to customize for every application task.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Size_Exclusion_principle_2a432edcc1.webp" alt="KNAUER: Size Exclusion - principle" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Size_Exclusion_principle_2a432edcc1.webp 228w," sizes="100vw" width="1024" height="700"><h3>KNAUER AppliChrom® ABOA columns for aqueous SEC, organic GPC, and special applications</h3><ul><li>AppliChrom® ABOA StyDiViBe Series GPC-columns for GPC analysis of organic molecules using THF, toluene, chloroform.</li><li>AppliChrom ABOA SuperOH-P Series for aqueous GPC/SEC-analysis of mainly neutral and anionic polymers like heparins, polysaccharides, PEO, PEG,....</li><li>AppliChrom® ABOA DMSO-Phil-P Series for DMSO GPC/SEC analysis (humic substances, UF/MUF-glue, p-NIPA, many polycondensates, protein from pea or leguminosae,...)</li><li>AppliChrom® ABOA DMAc-Phil-P Series for GPC/ SEC analysis in DMAc, DMF, NMP. Good for many medium polar substances, polyoxazolines, lignin,...</li><li>AppliChrom® ABOA Cat-Phil-P Series for aqueous GPC/SEC-analysis of special aminic and polycationic polymers like p-DADMAc, PEI/ polyethylenimin, chitosan, copolymers with polyaminofunctions, but also useful for polyanions or neutral polymers like heparin or PEO/PEG, dextran or pullulan.</li><li>Seperation Ranges: 100–50 000 000 Da</li></ul><h4>You decide between classical GPC/SEC columns with conventional mixed pore technology or AppliChrom® BPT technology:</h4>Separate oligomers and polymers with the new GPC media line from AppliChrom® BPT synthesis technology for large range, high resolution separations with increased accuracy in calibration (patent pending).<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg" alt="KNAUER: AppliChrom® ABOA columns." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg 245w," sizes="100vw" width="1379" height="718">

KNAUER AppliChrom® ABOA StyDiViBe GPC Columns

Organic polystyrene-divinylbenzene copolymer base material with high porosity for high resolution

AppliChrom® GPC columns for GPC analysis of organic molecules with THF, toluene, chloroform<h4>Properties:</h4><ul><li>Organic polystyrene-divinylbenzene copolymer base material with high porosity for high resolution</li><li>High pressure stability: up to 150 bar</li><li>Temperature stable: between 10-145 °C</li><li>GPC range: from 0.1 up to 50 000 kDa</li><li>Low column bleed for low detector noise</li><li>High purity to eliminate adsorptive effects and combine pure GPC with long lifetime</li><li>Large calibration ranges for several decades due to the unique process of BPT technology</li><li>Range of individual porosities that can be used individually or in combination</li><li>Optimized for: 1 ml/min flow rate for 8 mm ID columns</li><li>High level of reproducibility and peak precision due to the advanced packing procedure</li><li>Recommended eluents: THF, Toluene, CHCl₃, dichlorbenzene, hexane/EtOAc (10:90, V:V)</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Appli_Chrom_ABOA_Sty_Di_Vi_Be_P_Molecular_sizes_range_ca9a682d2e.jpg" alt="KNAUER: AppliChrom® ABOA StyDiViBe-P - Molecular sizes range" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Appli_Chrom_ABOA_Sty_Di_Vi_Be_P_Molecular_sizes_range_ca9a682d2e.jpg 235w," sizes="100vw" width="1072" height="712"><h4>Applications</h4>Hydrophobic oligomers or polymers like:<ul><li>PVC, PMMA, polystyrene, epoxy resins, polyesters, bisphenol A resins</li></ul><h3>GPC &amp; SEC Columns</h3>GPC &amp; SEC systems offer solutions for various applications and laboratoriesGel permeation chromatography (GPC) and size exclusion chromatography (SEC) separate analytes by size using special columns with a porous matrix. The basic separation principle is based on the fact that smaller molecules penetrate these pores more strongly and therefore move more slowly through the matrix than larger molecules. GPC/SEC is often used as gentle and powerful purification technique or for quality control in research and development. Typical target molecules are polymers, dissolved in organic solvents for GPC, and macro biomolecules like proteins, antibodies or polysaccharides, dissolved in aqueous eluents for SEC.Separation is facilitated by selecting optimal particle and pore sizes. Therefore we offer a wide range of pore sizes (35, 100, 150, 250, 350, 500, 1000, 1500, 10E5, 10E6, 10E7 Å) and several particle sizes (5, 7, 10, 12, 20 µm) as a choice to customize for every application task.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Size_Exclusion_principle_2a432edcc1.webp" alt="KNAUER: Size Exclusion - principle" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Size_Exclusion_principle_2a432edcc1.webp 228w," sizes="100vw" width="1024" height="700"><h3>KNAUER AppliChrom® ABOA columns for aqueous SEC, organic GPC, and special applications</h3><ul><li>AppliChrom® ABOA StyDiViBe Series GPC-columns for GPC analysis of organic molecules using THF, toluene, chloroform.</li><li>AppliChrom ABOA SuperOH-P Series for aqueous GPC/SEC-analysis of mainly neutral and anionic polymers like heparins, polysaccharides, PEO, PEG,....</li><li>AppliChrom® ABOA DMSO-Phil-P Series for DMSO GPC/SEC analysis (humic substances, UF/MUF-glue, p-NIPA, many polycondensates, protein from pea or leguminosae,...)</li><li>AppliChrom® ABOA DMAc-Phil-P Series for GPC/ SEC analysis in DMAc, DMF, NMP. Good for many medium polar substances, polyoxazolines, lignin,...</li><li>AppliChrom® ABOA Cat-Phil-P Series for aqueous GPC/SEC-analysis of special aminic and polycationic polymers like p-DADMAc, PEI/ polyethylenimin, chitosan, copolymers with polyaminofunctions, but also useful for polyanions or neutral polymers like heparin or PEO/PEG, dextran or pullulan.</li><li>Seperation Ranges: 100–50 000 000 Da</li></ul><h4>You decide between classical GPC/SEC columns with conventional mixed pore technology or AppliChrom® BPT technology:</h4>Separate oligomers and polymers with the new GPC media line from AppliChrom® BPT synthesis technology for large range, high resolution separations with increased accuracy in calibration (patent pending).<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg" alt="KNAUER: AppliChrom® ABOA columns." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg 245w," sizes="100vw" width="1379" height="718">

KNAUER AppliChrom® ABOA DMAc-Phil GPC Columns

Organic polymer base material with high porosity for high resolution

AppliChrom® GPC columns for organic GPC analyses in DMAc or DMF<h4>Properties:</h4><ul><li>Organic polymer base material with high porosity for high resolution</li><li>Wide range of porosities and particle sizes</li><li>Pressure stability: up to 150 bar</li><li>Stable between: 35-145 °C</li><li>Excellent reproducibility and resolution due to the advanced packing procedure</li><li>High purity to eliminate adsorptive effects and combine pure GPC with long lifetime</li><li>GPC range from: 100-1 000 000 Da</li><li>Optimal for: 0.5 ml/min flow rates with 8 mm ID colums</li><li>Recommended eluents: DMAc, DMF, NMP, LiBr additive</li></ul><h4>Applications</h4>Slightly polar analytes like:<ul><li>PMMA, polyacryl nitril (PAN), acrylnitrile butadiene styrene (ABS), cellulose, and all DMF and DMAc soluble polymers</li></ul><h3>GPC &amp; SEC Columns</h3>GPC &amp; SEC systems offer solutions for various applications and laboratoriesGel permeation chromatography (GPC) and size exclusion chromatography (SEC) separate analytes by size using special columns with a porous matrix. The basic separation principle is based on the fact that smaller molecules penetrate these pores more strongly and therefore move more slowly through the matrix than larger molecules. GPC/SEC is often used as gentle and powerful purification technique or for quality control in research and development. Typical target molecules are polymers, dissolved in organic solvents for GPC, and macro biomolecules like proteins, antibodies or polysaccharides, dissolved in aqueous eluents for SEC.Separation is facilitated by selecting optimal particle and pore sizes. Therefore we offer a wide range of pore sizes (35, 100, 150, 250, 350, 500, 1000, 1500, 10E5, 10E6, 10E7 Å) and several particle sizes (5, 7, 10, 12, 20 µm) as a choice to customize for every application task.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Size_Exclusion_principle_2a432edcc1.webp" alt="KNAUER: Size Exclusion - principle" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Size_Exclusion_principle_2a432edcc1.webp 228w," sizes="100vw" width="1024" height="700"><h3>KNAUER AppliChrom® ABOA columns for aqueous SEC, organic GPC, and special applications</h3><ul><li>AppliChrom® ABOA StyDiViBe Series GPC-columns for GPC analysis of organic molecules using THF, toluene, chloroform.</li><li>AppliChrom ABOA SuperOH-P Series for aqueous GPC/SEC-analysis of mainly neutral and anionic polymers like heparins, polysaccharides, PEO, PEG,....</li><li>AppliChrom® ABOA DMSO-Phil-P Series for DMSO GPC/SEC analysis (humic substances, UF/MUF-glue, p-NIPA, many polycondensates, protein from pea or leguminosae,...)</li><li>AppliChrom® ABOA DMAc-Phil-P Series for GPC/ SEC analysis in DMAc, DMF, NMP. Good for many medium polar substances, polyoxazolines, lignin,...</li><li>AppliChrom® ABOA Cat-Phil-P Series for aqueous GPC/SEC-analysis of special aminic and polycationic polymers like p-DADMAc, PEI/ polyethylenimin, chitosan, copolymers with polyaminofunctions, but also useful for polyanions or neutral polymers like heparin or PEO/PEG, dextran or pullulan.</li><li>Seperation Ranges: 100–50 000 000 Da</li></ul><h4>You decide between classical GPC/SEC columns with conventional mixed pore technology or AppliChrom® BPT technology:</h4>Separate oligomers and polymers with the new GPC media line from AppliChrom® BPT synthesis technology for large range, high resolution separations with increased accuracy in calibration (patent pending).<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg" alt="KNAUER: AppliChrom® ABOA columns." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg 245w," sizes="100vw" width="1379" height="718">

KNAUER AppliChrom® ABOA DMSO-Phil GPC Columns

AppliChrom® DMSO-PHIL optimized for DMSO-GPC applications from an interaction-free pure GPC base material

AppliChrom® DMSO-PHIL optimized for DMSO-GPC applications<h4>Properties:</h4><ul><li>Interaction-free pure GPC base material</li><li>Temperature stabel between: 40-90 °C (145 °C) depending on application</li><li>Simple, reliable and robust GPC &amp; SEC calibration from dextrans, pullulans et al.</li><li>Low column bleed for low detector gain for improved refractive index, light scattering or viscosity detection</li><li>12 µm particle technology for low back pressure</li><li>Tolerates traces of water and NaNO₃ additve</li><li>Large volume and optimized mass transfer for polymers with optimized resolution</li><li>Low cost due to long column lifetime - result of the combination of optimized particle and packing technology</li><li>Recommended eluents: DMSO, 0.075 M NaNO₃</li></ul><h4>Applications</h4>Polar, not water soluble oligomers or polymers like:<ul><li>polysaccharides, lignin, amylose, starch, humic acids, polyvenyl pyridin, PNIPA, polyvinyl alcohol (PVA), melamin-urea-formaldehyd resin (MUF) or urea-formaldehyd resin (UF)</li></ul><h3>GPC &amp; SEC Columns</h3>GPC &amp; SEC systems offer solutions for various applications and laboratoriesGel permeation chromatography (GPC) and size exclusion chromatography (SEC) separate analytes by size using special columns with a porous matrix. The basic separation principle is based on the fact that smaller molecules penetrate these pores more strongly and therefore move more slowly through the matrix than larger molecules. GPC/SEC is often used as gentle and powerful purification technique or for quality control in research and development. Typical target molecules are polymers, dissolved in organic solvents for GPC, and macro biomolecules like proteins, antibodies or polysaccharides, dissolved in aqueous eluents for SEC.Separation is facilitated by selecting optimal particle and pore sizes. Therefore we offer a wide range of pore sizes (35, 100, 150, 250, 350, 500, 1000, 1500, 10E5, 10E6, 10E7 Å) and several particle sizes (5, 7, 10, 12, 20 µm) as a choice to customize for every application task.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Size_Exclusion_principle_2a432edcc1.webp" alt="KNAUER: Size Exclusion - principle" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Size_Exclusion_principle_2a432edcc1.webp 228w," sizes="100vw" width="1024" height="700"><h3>KNAUER AppliChrom® ABOA columns for aqueous SEC, organic GPC, and special applications</h3><ul><li>AppliChrom® ABOA StyDiViBe Series GPC-columns for GPC analysis of organic molecules using THF, toluene, chloroform.</li><li>AppliChrom ABOA SuperOH-P Series for aqueous GPC/SEC-analysis of mainly neutral and anionic polymers like heparins, polysaccharides, PEO, PEG,....</li><li>AppliChrom® ABOA DMSO-Phil-P Series for DMSO GPC/SEC analysis (humic substances, UF/MUF-glue, p-NIPA, many polycondensates, protein from pea or leguminosae,...)</li><li>AppliChrom® ABOA DMAc-Phil-P Series for GPC/ SEC analysis in DMAc, DMF, NMP. Good for many medium polar substances, polyoxazolines, lignin,...</li><li>AppliChrom® ABOA Cat-Phil-P Series for aqueous GPC/SEC-analysis of special aminic and polycationic polymers like p-DADMAc, PEI/ polyethylenimin, chitosan, copolymers with polyaminofunctions, but also useful for polyanions or neutral polymers like heparin or PEO/PEG, dextran or pullulan.</li><li>Seperation Ranges: 100–50 000 000 Da</li></ul><h4>You decide between classical GPC/SEC columns with conventional mixed pore technology or AppliChrom® BPT technology:</h4>Separate oligomers and polymers with the new GPC media line from AppliChrom® BPT synthesis technology for large range, high resolution separations with increased accuracy in calibration (patent pending).<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg" alt="KNAUER: AppliChrom® ABOA columns." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg 245w," sizes="100vw" width="1379" height="718">

KNAUER AppliChrom® ABOA HFIP-Phil GPC Columns

AppliChrom® GPC columns for separations in HFIP with broad pore technology for GPC for analytes with challenging solution behavior

AppliChrom® GPC columns for separations in HFIP<h4>Properties:</h4><ul><li>Broad pore technology for GPC for analytes with challenging solution behavior</li><li>Separation range beween: 0.1–50 000 kDa</li><li>Range of individual porosities that can be used individually or in combination</li><li>Temperature stable between: 35–145 °C</li><li>Long column lifetime - result of the combination of optimized particle and packing technology</li><li>Low column bleed for low detector noise</li><li>Excellent reproducibility and resolution due to the advanced packing procedure</li><li>Calibration standard: PMMA or PEO &nbsp;</li><li>Recommended eluents: Hexafluoroisopropanol (HFIP), 0.1 % KTFa as modifier</li></ul><h4>Applications</h4>Crystalline highperformance polymers like:&nbsp;<ul><li>polyamides (PA), polyethylen terepthalate (PET), polybutylen terepthalate (PBT), polylactic acid (PLA), polyamid 6 (PA6), polycaprolactam, paraformaldehyde, polyoxymethylene (POM), polyacetal, several polyoxazolines</li></ul><h3>GPC &amp; SEC Columns</h3>GPC &amp; SEC systems offer solutions for various applications and laboratoriesGel permeation chromatography (GPC) and size exclusion chromatography (SEC) separate analytes by size using special columns with a porous matrix. The basic separation principle is based on the fact that smaller molecules penetrate these pores more strongly and therefore move more slowly through the matrix than larger molecules. GPC/SEC is often used as gentle and powerful purification technique or for quality control in research and development. Typical target molecules are polymers, dissolved in organic solvents for GPC, and macro biomolecules like proteins, antibodies or polysaccharides, dissolved in aqueous eluents for SEC.Separation is facilitated by selecting optimal particle and pore sizes. Therefore we offer a wide range of pore sizes (35, 100, 150, 250, 350, 500, 1000, 1500, 10E5, 10E6, 10E7 Å) and several particle sizes (5, 7, 10, 12, 20 µm) as a choice to customize for every application task.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Size_Exclusion_principle_2a432edcc1.webp" alt="KNAUER: Size Exclusion - principle" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Size_Exclusion_principle_2a432edcc1.webp 228w," sizes="100vw" width="1024" height="700"><h3>KNAUER AppliChrom® ABOA columns for aqueous SEC, organic GPC, and special applications</h3><ul><li>AppliChrom® ABOA StyDiViBe Series GPC-columns for GPC analysis of organic molecules using THF, toluene, chloroform.</li><li>AppliChrom ABOA SuperOH-P Series for aqueous GPC/SEC-analysis of mainly neutral and anionic polymers like heparins, polysaccharides, PEO, PEG,....</li><li>AppliChrom® ABOA DMSO-Phil-P Series for DMSO GPC/SEC analysis (humic substances, UF/MUF-glue, p-NIPA, many polycondensates, protein from pea or leguminosae,...)</li><li>AppliChrom® ABOA DMAc-Phil-P Series for GPC/ SEC analysis in DMAc, DMF, NMP. Good for many medium polar substances, polyoxazolines, lignin,...</li><li>AppliChrom® ABOA Cat-Phil-P Series for aqueous GPC/SEC-analysis of special aminic and polycationic polymers like p-DADMAc, PEI/ polyethylenimin, chitosan, copolymers with polyaminofunctions, but also useful for polyanions or neutral polymers like heparin or PEO/PEG, dextran or pullulan.</li><li>Seperation Ranges: 100–50 000 000 Da</li></ul><h4>You decide between classical GPC/SEC columns with conventional mixed pore technology or AppliChrom® BPT technology:</h4>Separate oligomers and polymers with the new GPC media line from AppliChrom® BPT synthesis technology for large range, high resolution separations with increased accuracy in calibration (patent pending).<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg" alt="KNAUER: AppliChrom® ABOA columns." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_KNAUER_Appli_Chrom_ABOA_columns_58d5d380f6.jpg 245w," sizes="100vw" width="1379" height="718">

Products focused on LC columns - page 20

Related content

Combining elemental analysis and molecular techniques to characterize Ancient Egyptian mummification balms

Forced degradation analysis of recombinant adeno-associated virus serotype 8 based on analytical anion exchange chromatography coupled to orthogonal characterization

Analysis of characteristic flavor compounds in coffee peels subjected to different thermal processing treatments based on GC–IMS and HS-SPME–GC–MS combined with chemical pattern recognition