<p><strong>International team of scientists shed light on the processes that drive the global distribution of air pollutants - the re-emission of polycyclic aromatic compounds (PACs). The new study was published in the Journal of Hazardous Materials.</strong></p><p>PACs are long-lived toxic substances contributing significantly to air pollution in the industrialized world. They are inevitable byproducts of all kinds of fossil fuel and wood combustion, and following dry or wet deposition (rainfall), PACs are transferred to and stored in soils. In response to continued pollution and wind conditions for transport and deposition, PACs may volatilize from the soil surface and be re-released into the air. That way, soils become secondary sources of these air pollutants.</p><p>By determining air and soil contamination as well as the exchange between air and soil in rural grassland and in a remote forest, the scientists identified a number of substances being potentially re-emitted.</p><p><i>“Such re-emissions might add significantly to the concentrations of PACs in ambient air far from source areas," </i>emphasizes the importance of these findings <strong>Gerhard Lammel</strong> from the RECETOX center.</p><p>For the first time, they also quantified the soil’s re-emission flux (mass of PACs volatilised per time and area) in a boreal forest in Finland. When extrapolating this flux to the country scale, they found it comparable to the primary emissions from industry, household heating, and motor vehicle traffic in Finland. The results of the study, published in the Journal of Hazardous Materials, suggest that such secondary emissions in countries receiving air pollution from neighboring states might even exceed the domestic primary emissions.</p><p><i>"Our results suggest that emission inventories at least in the less populated countries of Europe should account for this additional type of sources. We need more measurements to help identify sensitivities towards certain soil conditions driving these re-emissions to ultimately arrive at more accurate emission inventories across landscapes,”</i> adds Lammel.</p><p>Furthermore, the research highlights the 'grasshopper effect’, meaning that the potential of re-emission enhances the widespread distribution and environmental lifetimes of substances hazardous for human health and ecosystems.</p><blockquote><p><i><strong>The research was supported by the Czech Science Foundation</strong> (25-17534S); <strong>Research Infrastructure ACTRIS-CZ </strong>(No. LM2023030) and <strong>RECETOX</strong> (No. LM2023069) <strong>financed by the Ministry of Education, Youth and Sports, and the OP RDE </strong>(the CETOCOEN EXCELLENCE project No. CZ.02.1.01/0.0/0.0/17_043/0009632).</i></p></blockquote><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/RECETOX_MUNI_Studie_odhalila_necekane_velky_prinos_pudy_ke_znecisteni_ovzdusi_0c2b62ee68.jpg" alt="RECETOX-MUNI: Study reveals an unexpectedly large contribution to air pollution from soils" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_RECETOX_MUNI_Studie_odhalila_necekane_velky_prinos_pudy_ke_znecisteni_ovzdusi_0c2b62ee68.jpg 146w," sizes="100vw" width="738" height="790"></p><blockquote><h4><strong>The original article</strong></h4><h4><a target="_blank" rel="noopener noreferrer" href="https://www.sciencedirect.com/science/article/pii/S0304389426022636?via%3Dihub#sec0005"><strong>Polycyclic aromatic compounds in air – importance of re-volatilisation from soils</strong></a></h4><p>Gerhard Lammel, Dominika Bezdeková, Jakub Martiník, Karsten Baumann, Rostislav Červenka, Petr Kukučka, Ondřej Letocha, Ludovic Mayer, Petra Přibylová, Roman Prokeš, Üllar Rannick, Risto Taipale</p><p><i><strong>J. Hazard. Mater.</strong></i>, 2026, <strong>516</strong>, 143283&nbsp;</p><p><a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1016/j.jhazmat.2026.143283"><span>https://doi.org/10.1016/j.jhazmat.2026.143283</span></a></p><h6>licenced under<a target="_blank" rel="noopener noreferrer" href="https://creativecommons.org/licenses/by-nc/4.0/"> <strong>CC-BY 4.0</strong></a></h6></blockquote><h4><strong>Abstract</strong></h4><p>Polycyclic aromatic hydrocarbons (PAHs) and their nitrated and oxygenated derivatives (NPAHs, OPAHs) are semivolatile air pollutants which may re-volatilise following atmospheric deposition to soil. Here, we determined polycyclic aromatic compounds’ (PACs) concentrations in air, topsoil and air equilibrated with soil at a rural grassland site and a boreal forest site. The samples were analysed by GC-MS/MS and the flux was studied by fugacity calculations and a micrometeorological flux-gradient method. In soil at the boreal site, OPAH and NPAH contributed much higher fractions to PAC contamination of air and soil than at the rural site, reflecting the conversion of primary PACs during transport from sources. The same number of PACs in soil have reached equilibrium concentration with air, despite one site being in a polluted and PAC source region and the other in a much less polluted and PAC receptor region. The direction of air-soil exchange was found insensitive to the modest day-night temperature variation at both sites. Upward diffusive flux was observed for one PAH, triphenylene, at the rural grassland site, and for three 3-ring PAHs and naphthaldehyde at the boreal forest site. There, emission fluxes were quantified and ranged 0.5–12 ng m<sup>−2</sup> h<sup>−1</sup>. The results indicate that low molecular weight PAH secondary emissions in a receptor region may be of same order of magnitude as domestic primary emissions.</p>

Study reveals an unexpectedly large contribution to air pollution from soils

<p><strong>Whether a drug can effectively bind to its target protein, or how different parts of a virus or a cell interact, depends on processes taking place at the level of individual molecules. Their behaviour is determined not only by their shape, but also by the electrostatic forces acting between them. Understanding how these forces are distributed helps scientists explain why certain molecules attract each other, how they bind and how they interact.</strong></p><p>This is where the <a target="_blank" rel="noopener noreferrer" href="https://acc.biodata.ceitec.cz/"><i><strong>Atomic Charge Calculator (ACC)</strong></i></a> comes in. Researchers at Masaryk University have been developing this computational tool for more than a decade. Its third and most advanced generation to date was developed at <strong>CEITEC Masaryk University</strong> and the<strong> Faculty of Science at Masaryk University</strong>, in collaboration with the <strong>Faculty of Informatics at Masaryk University</strong> and <strong>Palacký University Olomouc</strong>.</p><p><strong>ACC III </strong>calculates the electric charges of individual atoms and visualises their distribution directly within three-dimensional molecular structures. It brings together <strong>twenty different calculation methods</strong> in a single environment and can work with a wide range of molecules – from small organic compounds to proteins and other large biomolecular structures.</p><p>A key advantage of <strong>Atomic Charge Calculator III</strong> is that it combines a broad range of computational methods with ease of access. Basic calculations can be performed directly in a web browser, <strong>with no need to install specialised software or register for an account</strong>. The resulting charges can be displayed directly on a 3D model of the molecule. For advanced users and large-scale analyses, the platform also supports automated data processing and allows its computational core to be run locally.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/CEITEC_Co_pritahuje_molekuly_Nova_generace_nastroje_z_CEITEC_zviditelnuje_sily_mezi_atomy_d32d7bd2cd.jpg" alt="CEITEC/Biological Data Management and Analysis Core Facility: What Attracts Molecules? A New Generation of a CEITEC Tool Makes the Forces Between Atoms Visible: Oseltamivir bound to influenza virus neuraminidase (blue: positive partial charges, red: negative charges). A strong electrostatic interaction occurs between a negatively charged region of the drug and positively charged regions of the protein." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_CEITEC_Co_pritahuje_molekuly_Nova_generace_nastroje_z_CEITEC_zviditelnuje_sily_mezi_atomy_d32d7bd2cd.jpg 140w," sizes="100vw" width="1600" height="1786"></p><h3><strong>Why are scientists interested in the electric charges of atoms?</strong></h3><p>Electrons are not distributed evenly within molecules. Individual atoms can therefore carry different partial electric charges. These charges play an important role in determining how molecules behave towards their surroundings and towards one another.</p><p>Positively and negatively charged regions of molecules can attract each other, while regions with the same charge repel each other. The distribution of these charges therefore helps determine which molecules approach each other, how they orient themselves and how strongly they may bind. In biology, this is important, for example, in molecular recognition or when a drug binds to its target protein. Understanding partial charges therefore helps scientists gain insight into the interactions underlying the behaviour of many molecular systems.</p><p>There is, however, no single universal way to determine partial charges. Different computational methods can produce different values, and the choice of method also depends on how the results will be used. Accurate quantum-chemical calculations can also become very computationally demanding when large numbers of structures are involved. ACC III therefore brings together<strong> empirical methods </strong>that allow these calculations to be performed more quickly and on a large scale.</p><p><i>“From the outset, we designed ACC III to make calculating partial atomic charges as straightforward as possible. Users do not need to install anything or deal with complicated settings – they simply upload a molecule and start the calculation with a single click. The application then suggests suitable methods from the twenty available and can handle both small molecules and large biomolecular structures,”</i> says <a target="_blank" rel="noopener noreferrer" href="https://www.ceitec.eu/tomas-racek-ph-d/u94476?page=publication"><strong>Tomáš Raček</strong></a>, who has been developing and maintaining ACC since 2018.</p><h3><strong>How an antiviral drug binds to an influenza virus protein</strong></h3><p>The authors demonstrate what charge distribution can reveal using the well-known antiviral drug oseltamivir, marketed as Tamiflu. The drug binds to neuraminidase, a protein of the influenza A virus. ACC III can show directly within the three-dimensional structure where positive and negative partial charges are located and how they contribute to the interaction between the drug and the protein.</p><p><i>“The example of oseltamivir clearly shows why it is useful not only to calculate the charges, but also to visualise them directly within the structure. This allows us to see which parts of the two molecules interact electrostatically. The same approach can be used to study many other molecular systems,”</i> explains Tomáš Raček.</p><p><strong>ACC III is not limited to small molecules</strong>. It can also work with proteins and other large biomolecular structures. The authors demonstrate this using a second example: the <strong>SARS-CoV-2 </strong>pore complex. Coronaviruses form these pores during replication in infected cells and use them to transport viral RNA across membranes. Visualising partial charges helps distinguish the parts of the complex that pass through the non-polar environment of the membrane from its more highly charged regions.</p><h3><strong>From calculation straight to a 3D model</strong></h3><p>The new generation of the Atomic Charge Calculator also offers<strong> more advanced visualisation</strong>. It uses Mol*, which allows calculated charges to be mapped directly onto a three-dimensional structure and explored interactively. A visualisation created using ACC III was also selected for the<strong> cover of the special </strong><i><strong>Nucleic Acids Research</strong></i><strong> Web Server Issue</strong>. Created by Tomáš Raček, the cover image shows the distribution of partial charges in a membrane protein system.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/CEITEC_Co_pritahuje_molekuly_Nova_generace_nastroje_z_CEITEC_zviditelnuje_sily_mezi_atomy_3_85cc310925.jpeg" alt="CEITEC/Oxford University Press: What Attracts Molecules? A New Generation of a CEITEC Tool Makes the Forces Between Atoms Visible: Cover page in Nucleic Acids Research journal." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_CEITEC_Co_pritahuje_molekuly_Nova_generace_nastroje_z_CEITEC_zviditelnuje_sily_mezi_atomy_3_85cc310925.jpeg 124w," sizes="100vw" width="1600" height="2011"></p><p>Results can be downloaded in several standard formats and, for the first time, stored directly in the mmCIF format commonly used for three-dimensional biomolecular structures. Information about the structure and its calculated charges can therefore remain together in a single file and be used by other tools.</p><p>For researchers who need to process large numbers of structures, ACC III also provides an API and a computational core that can be run locally. The platform can therefore be used both for individual calculations through its web interface and as part of larger automated analyses.</p><h3><strong>More than a decade of development</strong></h3><p>Scientists introduced the first Atomic Charge Calculator in <strong>2015</strong>, followed by its second generation in <strong>2020</strong>. In the meantime, the team also developed specialised tools: PDBCharges for structures from the Protein Data Bank and AlphaCharges for structures from the AlphaFold Database.</p><p><i>“The Atomic Charge Calculator was never a one-off project,”</i> says <a target="_blank" rel="noopener noreferrer" href="https://www.ceitec.eu/prof-radka-svobodova-ph-d/u17518?page=publication"><strong>Radka Svobodová</strong></a>, Head of the Biological Data Management and Analysis Core Facility at CEITEC Masaryk University. <i>“For more than a decade, we have been continuously developing tools that respond both to new possibilities in structural bioinformatics and to the needs of their users. The third generation combines straightforward web-based use with capabilities that are important for the automated processing of large numbers of molecular structures.”</i></p><blockquote><p><strong>Atomic Charge Calculator III is freely available through its web interface and does not require registration for basic use.</strong> Its development was supported by the<strong> ELIXIR CZ </strong>research infrastructure.</p></blockquote><h5><strong>The authors presented the new generation of the tool in </strong><a target="_blank" rel="noopener noreferrer" href="https://academic.oup.com/nar/article/54/W1/W211/8662890"><i><strong>Nucleic Acids Research</strong></i></a><strong>.</strong></h5>

What Attracts Molecules? A New Generation of a CEITEC Tool Makes the Forces Between Atoms Visible 

<p><span><strong>Not every concentration job can tolerate heat — and not every concentrator that handles heat well can handle cold. </strong></span><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/products/2441"><span><strong>Refrigerated centrifugal vacuum concentrators</strong></span></a><span><strong> exist for a specific reason: proteins, RNA, enzymes, and synthetic peptides degrade quickly under thermal stress, and standard concentrators that rely on heat alone can compromise sample integrity before evaporation finishes. We compared two of the leading refrigerated systems — the Labconco Refrigerated CentriVap and the </strong></span><a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/products/2611"><span><strong>Thermo Fisher Refrigerated SpeedVac SRF110</strong></span></a><span><strong> — to see how they stack up for labs where sample preservation is non-negotiable.</strong></span></p><blockquote><p><a target="_blank" rel="noopener noreferrer" href="https://explore.organomation.com/labconco-refrigerated-centrivap-vs-thermo-fisher-refrigerated-speedvac"><span><strong>Download the full comparison with pricing here!</strong></span></a></p></blockquote><h3><strong>The Problem Refrigeration Actually Solves</strong></h3><p>It's a detail that gets lost in most spec-sheet comparisons: running a<a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/lcms/products?manufacturerItems=540&amp;search=centrivap"><strong> vacuum concentrator </strong></a>without temperature control can cause a sample to over-cool itself. As solvent evaporates under vacuum, the process pulls latent heat from the sample — the same evaporative cooling effect that makes sweat feel cold on skin. For a heat-stable solvent, that's irrelevant. For a temperature-sensitive biomolecule, it can drop the sample low enough to risk unwanted freezing or sublimation mid-run. Labconco's own engineering notes for the Refrigerated CentriVap describe this directly: the unit pairs a refrigeration system with a heater so operators can hold a precise set-point temperature and avoid sublimated samples caused by evaporative cooling. That's the whole reason this product category exists, and it's worth understanding before comparing specs line by line.</p><h3><strong>Price: A Wider Gap at the High End</strong></h3><p>The <strong>Labconco Refrigerated CentriVap</strong> is typically priced around <strong>$13,000 USD</strong>. The <strong>Thermo Fisher SRF110</strong> runs higher, generally<strong> $15,000–$17,000 USD</strong>, and that's before factoring in the modular kit components — Thermo Fisher sells the SRF110 with a separate vacuum system, rotor, vapor trap, and heat transfer fluid bundled into the total kit price. The price gap between these two refrigerated units is proportionally larger than what we found comparing their non-refrigerated counterparts, which makes the value case for the CentriVap even more pronounced at this tier.</p><h3><strong>Capacity: The Difference That Matters Most Right Now</strong></h3><p>This is where the two systems really separate, and it lines up with where lab demand is heading. The Refrigerated CentriVap processes up to <strong>312 samples</strong> per run; the SRF110 tops out at <strong>132</strong>. Both handle volumes up to 50 mL, so this isn't a volume trade-off the way it was in our earlier comparison — it's a straight throughput advantage for the CentriVap.</p><p>That gap matters because<a target="_blank" rel="noopener noreferrer" href="https://peptidestaff.com/industry-trends/peptide-therapy-market-forecast-2026/"><strong> peptide-based therapeutics </strong></a>have become one of the fastest-growing classes of drugs in the pharmaceutical industry, and manufacturing capacity — not demand — is widely cited as the primary bottleneck holding the sector back. <a target="_blank" rel="noopener noreferrer" href="https://labrulez.com/en-us/all/article/7541"><strong>GLP-1 programs</strong></a> in particular are pushing <a target="_blank" rel="noopener noreferrer" href="https://www.bachem.com/knowledge-center/glp-1-demand-for-peptide-manufacturers/"><span><strong>peptide manufacturers</strong></span></a><span> </span>toward industrialized, large-scale production platforms rather than one-off batch work. <a target="_blank" rel="noopener noreferrer" href="https://www.organomation.com/"><strong>Sample prep equipment</strong></a> sits squarely inside that bottleneck: every purification run, HPLC fraction, and concentration step has to scale alongside the chemistry. A concentrator that processes more than double the samples per run, like the Refrigerated CentriVap, is a meaningfully different proposition for a peptide synthesis or purification lab than it would have been five years ago.</p><h3><strong>Temperature Range: How Cold You Can Go</strong></h3><p>The CentriVap's refrigeration reaches as low as<strong> -10°C</strong>; the SRF110 bottoms out at <strong>-4°C</strong>. Both units heat up to +100°C. That six-degree gap on the cold end isn't dramatic on paper, but for the most heat-labile peptides and enzymes, the lower floor gives operators more margin before a sample is at risk — particularly during longer runs where evaporative cooling has more time to compound any thermal load on the sample.</p><h3><strong>Vortex Speed and Mechanical Flexibility</strong></h3><p>The CentriVap offers an adjustable vortex range from <strong>500 to 1,800 rpm</strong>, while the SRF110 runs up to<strong> 1,725 rpm</strong>. The CentriVap's lower floor is the more useful distinction here — fragile, large, or shear-sensitive samples (think intact proteins or larger peptide constructs) sometimes need to run at reduced rotor speed to avoid mechanical stress, and the CentriVap gives operators that headroom on both ends rather than just a ceiling.</p><h3><strong>Lid Material: Visibility vs. Durability</strong></h3><p>The Refrigerated CentriVap uses a <strong>glass lid</strong>, letting operators see into the chamber during a run. The SRF110 uses an <strong>epoxy-coated aluminum lid</strong>, which trades visibility for added durability. For labs running visually distinct sample batches — colored buffers, multiple project codes, HPLC fractions pulled at different time points — the ability to glance at the chamber without interrupting a run has real workflow value, especially in a core facility setting where one instrument serves multiple research groups.</p><h3><strong>What This Means for Core Facilities</strong></h3><p>Shared instrumentation cores feel throughput and cold-temperature constraints differently than a single-PI lab does. A<a target="_blank" rel="noopener noreferrer" href="https://blog.organomation.com/blog/an-appreciation-for-academic-core-labs"><strong> core running samples from multiple research groups </strong></a>— some doing routine RNA cleanup, others running heat-labile peptide fractions from an HPLC purification step — needs an instrument that won't bottleneck on either axis. The CentriVap's combination of higher per-run capacity and a lower refrigeration floor gives a shared facility more room to serve mixed workloads without forcing every group onto the same conservative settings a less flexible unit would require.</p><h3><strong>Built for the Same Footprint</strong></h3><p>Both units are sized for fume hood placement, with the CentriVap measuring<strong> 15.0 x 27.2 x 13.9 inches </strong>against the SRF110's<strong> 16.62 x 25 x 13.75 inches </strong>— close enough that floor planning isn't a deciding factor either way. Both carry <strong>standard one-year warranties</strong>.</p><h3><strong>The Bottom Line</strong></h3><p>For labs concentrating proteins, RNA, enzymes, or peptide fractions at scale — particularly anyone supporting peptide therapeutic development, where production capacity is already the limiting factor industry-wide — the Labconco Refrigerated CentriVap's combination of higher throughput, lower cold-temperature floor, and lower price makes it the stronger fit. The SRF110 remains a capable option for labs with smaller batch sizes already standardized on Thermo Fisher's modular vacuum ecosystem.</p><p>Organomation distributes the full Labconco CentriVap line, including the Refrigerated and Refrigerated Pro models. Contact our team at sales@organomation.com to talk through rotor configuration, cold trap pairing, and throughput planning for your lab.&nbsp;</p><blockquote><h5><a target="_blank" rel="noopener noreferrer" href="https://explore.organomation.com/labconco-refrigerated-centrivap-vs-thermo-fisher-refrigerated-speedvac"><span><strong>Download the full comparison with pricing here!</strong></span></a></h5></blockquote>

Refrigerated SpeedVac SRF110 vs. CentriVap - Why Sample Capacity Matters More Than Ever for Peptide and Protein Labs

Article

Product

Environment

Science and research

RECETOX (Research Centre for Toxic Compounds in the Environment) is an independent department of the Faculty of Science of Masaryk University in Brno, which has been established in 1983. RECETOX is focused on the research and education in cross-cutting area of Environment and Health. It addresses interactions among chemicals, environment, and biological systems, including consequences at local, regional, and global levels.

RECETOX - Centrum pro výzkum toxických látek v prostředí

Since its establishment in 2011, CEITEC has quickly developed into a cutting-edge infrastructure for research which performs highly alongside the best institutes in Europe. Among the main priorities of CEITEC are the promotion of a motivating and dynamic international scientific environment, the provision of state-of-the-art research infrastructure, and the policy of open communication and equal opportunities.

CEITEC

Organomation, founded in 1959, designs and manufactures high-quality nitrogen evaporators and extraction systems. Known for innovation and durability, their lab instruments are used globally for efficient sample preparation with strong customer support.

Organomation

Waters ACQUITY QDa II Mass Detector

The ACQUITY™ QDa™ II Mass Detector enhances efficiency and productivity in separations workflows with advanced technology.

<h3><strong>Advancing the Power of Mass Detection</strong></h3><ul><li><strong>Identify Everything in Your Sample with Complete Confidence&nbsp;</strong></li></ul><h5><strong>Information-rich mass spectral data starts here&nbsp;</strong></h5><p><strong>Built on a solid foundation of groundbreaking technology, the ACQUITY™ QDa™ II Mass Detector provides even more efficiency and productivity of separations workflows, providing information-rich mass spectral data, ensuring compliance, and regulatory certainty.</strong></p><h4><strong>SEE MORE COMPOUNDS</strong></h4><p>Greater compound coverage from an extended mass range to support small molecules, large molecules and new modalities. A complementary technique to analog detection for chemicals with no chromophores, ACQUITY QDa II Mass Detector enables you to confirm the identity and purity of more compounds with the power of mass detection.</p><h4><strong>ANALYZE MORE SAMPLES</strong></h4><p>Robust, reliable and requiring no sample-specific adjustment. Simply power on to make informed decisions with the full picture of what’s in your sample. Minimal maintenance along with system performance monitoring ensures maximum uptime.&nbsp;</p><h4><strong>HAVE MORE CONFIDENCE IN THE ROBUSTNESS OF YOUR SEPARATIONS</strong></h4><p>The addition of mass detection to your method development workflow enables fast peak tracking and greater confidence in peak purity, for more robust separations. Combined with industry-leading AQbD method development software, your lab can achieve unprecedented MS peak tracking functionality with the ACQUITY QDa II Mass Detector.</p><h4><strong>STRIVE FOR MORE SUSTAINABILITY</strong></h4><p>Achieve up to a 70% reduction in energy consumption and heat output compared to other vendor’s MS systems. The ACT Environmental Impact Factor Label<strong>*</strong> -- available and published by My Green Lab – provides clear, third-party verified information about the environmental impact of laboratory products, enabling you to make the most sustainable decisions for your organization.</p><p><strong>* </strong>ACT - About (<a target="_blank" rel="noopener noreferrer" href="https://www.mygreenlab.org/">mygreenlab.org</a>)</p><h3><strong>Continuing to Separate Beyond Question</strong></h3><ul><li><strong>Ensure your laboratory is prepared for the future</strong></li></ul><h4><strong>MORE PERFORMANCE</strong></h4><p>Plug and play performance with its intuitive design, complementary to optical detection with the robustness to handle all of your analyses. Working in harmony with your chromatography, it’s pre-optimized to work with your samples, without the sample-specific or user adjustments typical of traditional mass spectrometers.</p><h4><strong>MORE EFFICIENCY</strong></h4><p>The intuitive design of the ACQUITY QDa II Mass Detector provides additional data without cost or complexity. The most information you can get out of your separation for complete characterization. In synergy with optical detection, you can significantly reduce the chance that a sample component will go undetected helping to mitigate risk and ensuring a sound return on your investment.</p><h4><strong>MORE SUSTAINABILITY</strong></h4><p>Purposeful innovation, a stackable mass detector that seamlessly integrates into existing workflows resulting in less bench space and more energy efficient. Minimal cleaning and routine maintenance ensuring maximum uptime. Compatible with green solvents ensuring reduced environmental impact.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_ACQUITY_Q_Da_II_Mass_Detector_3_f98f84c080.jpg" alt="Waters ACQUITY QDa II Mass Detector." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_ACQUITY_Q_Da_II_Mass_Detector_3_f98f84c080.jpg 234w," sizes="100vw" width="1024" height="682"></p><ul><li>Simply power on, and you’re ready to go</li><li>Zero user set-up optimization, calibration, or adjustment</li><li>Run your analyses − it just works</li><li>When you’re done, just power-off</li></ul><h3><strong>The Perfect Partner</strong></h3><h4><strong>Designed for compatibility with your chromatography&nbsp;</strong></h4><p>Meet all your chromatography requirements with Waters chromatography systems, including our dependability and flexibility ranges of HPLC systems, performance range of UPLC systems, and our purification and specialty systems.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_ACQUITY_Q_Da_II_Mass_Detector_The_Perfect_Partner_Designed_for_compatibility_with_your_chromatography_1042adecb0.jpg" alt="Waters ACQUITY QDa II Mass Detector: The Perfect Partner. Designed for compatibility with your chromatography." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_ACQUITY_Q_Da_II_Mass_Detector_The_Perfect_Partner_Designed_for_compatibility_with_your_chromatography_1042adecb0.jpg 189w," sizes="100vw" width="1299" height="1074"></p><h3><strong>Effortless Integration</strong></h3><h4><strong>Achieve more with flexible software solutions</strong></h4><p>Process, Interpret, visualize, and compare the most complex data, and turn it into meaningful information quickly and simply. With integrated optical and mass detector data processing workflows, you can also analyze mass spectral data in the same way as you do photo diode array (PDA) data.</p><p>The ACQUITY QDa II Mass Detector is fully compatible with Masslynx™ Software and its suite of data processing application managers. Empower™ Software, our industry-leading chromatography data software platform is also fully compatible providing the ultimate flexibility.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_ACQUITY_Q_Da_II_Mass_Detector_Effortless_Integration_Achieve_more_with_flexible_software_solutions_4fd6e9f0d8.jpg" alt="Waters ACQUITY QDa II Mass Detector: Effortless Integration. Achieve more with flexible software solutions." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_ACQUITY_Q_Da_II_Mass_Detector_Effortless_Integration_Achieve_more_with_flexible_software_solutions_4fd6e9f0d8.jpg 245w," sizes="100vw" width="1397" height="422"></p><h4><strong>EMPOWER CHROMATOGRAPHY DATA SYSTEM (CDS)</strong></h4><p>Simplifying the way you collect, manage, and report chromatography test results is critical to your lab efficiency. With a suite of flexible functionalities that grows to meet your changing quality, business, and laboratory needs, Empower CDS has been purposefully designed to help you address your most demanding chromatographic, regulatory, and networking challenges.</p><h4><strong>EMPOWER LAB MANAGEMENT SYSTEM (LMS)</strong></h4><p>Automating your lab workflow, from sample creation to data archival, is critical for maintaining data integrity and enhancing productivity. Manage your data all from a single, simple dashboard for an integrated approach to your product lifecycle management so you can reduce transcription errors, increase efficiency, and maximize data durability.</p><h4><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1544"><strong>waters_connect™</strong></a><strong> SYSTEM MONITORING</strong></h4><p>Monitor all Empower Software-controlled chromatography systems remotely, at any time, from anywhere. Dynamically plan laboratory activities, monitor the status of your laboratory and maximize productivity. Troubleshoot and respond to errors faster, increasing system uptime.</p><h3><strong>Identify More in Released Glycan Analysis</strong></h3><h4><strong>Unlock the full potential of your QC glycan testing</strong></h4><p>While non-MS methods offer routine QC capabilities, they fall short in delivering the detailed characterization, crucial for biopharmaceutical development. The ACQUITY QDa II Mass Detector with extended mass range revolutionizes routine analysis, offering accurate QC monitoring of N-glycan species with speed and precision. Coupled with Waters chromatography systems, enjoy enhanced MS response with uniform charge state for accurate quantitation, enabling scrutiny of released N-glycan profiles in under 40 minutes per sample. Complement fluorescence (FLR) detection and embrace reproducible, quantitative separation for rapid decision-making.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_ACQUITY_Q_Da_II_Mass_Detector_Selected_Ion_Recording_SIR_chromatogram_of_doubly_charged_components_of_a_glycan_sample_Highlighted_additional_components_identified_s_a_result_of_the_extended_mass_range_ac0160e74d.jpg" alt="Waters ACQUITY QDa II Mass Detector: Selected Ion Recording (SIR) chromatogram of doubly charged components of a glycan sample. Highlighted additional components identified s a result of the extended mass range." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_ACQUITY_Q_Da_II_Mass_Detector_Selected_Ion_Recording_SIR_chromatogram_of_doubly_charged_components_of_a_glycan_sample_Highlighted_additional_components_identified_s_a_result_of_the_extended_mass_range_ac0160e74d.jpg 238w," sizes="100vw" width="1347" height="883"></p><h3><strong>Unparalleled Robustness for More Qualitative and Quantitative Performance</strong></h3><h4><strong>Reduce the risk of genotoxic impurities formation in drug manufacturing</strong></h4><p data-start="0" data-end="296">Support risk assessment through routine monitoring of excipients and raw materials in drug manufacturing. Accessible, regulatory compliant-ready LC-MS solutions provide an efficient and cost-effective approach in mitigating the risk of impurity formation during the manufacture of drug product.</p><p data-start="298" data-end="768">Nitrite, a critical risk factor in N-Nitrosamine formation, presents as an impurity in pharmaceutical excipients, often in parts per million (ppm). The ACQUITY QDa II Mass Detector is a robust and reliable solution for routine analysis of nitrite in excipients. With automated resolution, tuning, and calibration during start-up, the ACQUITY QDa II Mass Detector eliminates the need for analyst intervention, ensuring seamless operation and precise results every time.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_ACQUITY_Q_Da_II_Mass_Detector_Over_29_days_of_rigorous_testing_it_flawlessly_executed_approximately_6000_injections_with_minimal_downtime_02a496f422.jpg" alt="Waters ACQUITY QDa II Mass Detector: Over 29 days of rigorous testing, it flawlessly executed approximately 6000 injections with minimal downtime." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_ACQUITY_Q_Da_II_Mass_Detector_Over_29_days_of_rigorous_testing_it_flawlessly_executed_approximately_6000_injections_with_minimal_downtime_02a496f422.jpg 245w," sizes="100vw" width="1185" height="529"></p><p data-start="770" data-end="1012" data-is-last-node="" data-is-only-node="">Empower CDS reporting functionality offers simple reviewing of excipient nitrite concentration within a sample batch. This allows for fast and comprehensive decision making, while ensuring compliance and data integrity within your laboratory.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_ACQUITY_Q_Da_II_Mass_Detector_Example_of_Empower_CDS_generated_data_report_for_nitrite_content_in_a_maize_starch_sample_2f106193ee.jpg" alt="Waters ACQUITY QDa II Mass Detector: Example of Empower CDS generated data report for nitrite content in a maize starch sample." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_ACQUITY_Q_Da_II_Mass_Detector_Example_of_Empower_CDS_generated_data_report_for_nitrite_content_in_a_maize_starch_sample_2f106193ee.jpg 245w," sizes="100vw" width="937" height="585"></p><h3><strong data-start="0" data-end="62">Improving Efficiency with a More Sustainable Mass Detector</strong></h3><h4><strong>Low operational costs and environmental footprint</strong></h4><p data-start="123" data-end="346"><strong>As a leading technology innovator in chromatography, mass spectrometry, and thermal analysis instruments and software, Waters shares a common mission with our customers: to leave the world a better place than we found it.</strong></p><p data-start="348" data-end="674" data-is-last-node="" data-is-only-node="">Many of our customers are actively working to address environmental sustainability in balance with the need to continually reduce operational costs. Waters has addressed these challenges by providing an instrument with low electricity consumption and BTU/hr output – lessening the need for air conditioning and lowering costs.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_ACQUITY_Q_Da_II_Mass_Detector_Improving_Efficiency_with_a_More_Sustainable_Mass_Detector_Low_operational_costs_and_environmental_footprint_a9e182ea1f.jpg" alt="Waters ACQUITY QDa II Mass Detector: Improving Efficiency with a More Sustainable Mass Detector. Low operational costs and environmental footprint." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_ACQUITY_Q_Da_II_Mass_Detector_Improving_Efficiency_with_a_More_Sustainable_Mass_Detector_Low_operational_costs_and_environmental_footprint_a9e182ea1f.jpg 245w," sizes="100vw" width="1124" height="389"></p><p><strong>*</strong>From competitor A Specification Sheet.</p><p><strong>**</strong>From competitor B Site Preparation Checklist</p><h3><strong>Unrivaled Support</strong></h3><h3><strong>Ensure your success with world-renowned services</strong></h3><p data-start="77" data-end="464" data-is-last-node="" data-is-only-node="">Waters Service and Support helps maintain peak system performance, minimize downtime, address scientific challenges, and meet compliance requirements.&nbsp;</p><p>Waters award-winning consistent quality support, professional services, and education ensure your success wherever your laboratory is located in the world. With Waters service and support offerings<strong>*</strong> for your ACQUITY QDa II Mass Detector, you can</p><h4><strong data-start="0" data-end="30">GET UP AND RUNNING QUICKLY</strong></h4><p data-start="0" data-end="235">Get the onsite training and consultation you need to integrate the ACQUITY QDa II Mass Detector into your laboratory and assist with data migration and method transfer needs with Waters Professional Services.</p><h4><strong data-start="237" data-end="276">MEET YOUR LAB’S UNIQUE REQUIREMENTS</strong></h4><p data-start="237" data-end="460">Protect your instrument investment with the comprehensive portfolio of service plans from Waters FlexCHOICE™, which provides access to the most in-depth and up-to-date knowledge of the advanced science and technologies within Waters systems.</p><h4><strong data-start="462" data-end="487">FACILITATE COMPLIANCE</strong></h4><p data-start="462" data-end="635">Simplify the process of qualification, and record-keeping so that your business can focus on delivering products to market with Waters Compliance Services – so you can meet the regulations in your industry and in the countries where you conduct business.</p><h4><strong data-start="637" data-end="671">REDUCE TOTAL COST OF OWNERSHIP</strong></h4><p data-start="637" data-end="864">FlexCAPITAL™ <strong>**</strong> is designed to support continuous laboratory operation while satisfying the budgeting challenges of a constantly shifting landscape. Minimize total cost of ownership while optimizing instrument performance and protecting your organization from security risks associated with outdated software platforms.</p><h4><strong data-start="866" data-end="903">LEVERAGE YOUR EXISTING TECHNOLOGY</strong></h4><p data-start="866" data-end="1104" data-is-last-node="" data-is-only-node="">With the FlexUP™ Technology renewal program, you can upgrade your older single quadrupole mass spectrometry system to the ACQUITY QDa II Mass Detector -- improving performance, results, and productivity while controlling costs and mitigating compliance risk.</p><p><strong>*</strong> Availability of offerings varies by country. Contact Waters or your local Waters representative for details<br><strong>**</strong> FlexCAPITAL payment plan options and availability may vary by country. Other restrictions may apply.</p>

Waters RADIAN ASAP Direct Mass Detector

Combining flexibility, ease of operation, and speed without the need for complex sample preparation, separation or extensive MS experience, the RADIAN ASAP helps you and your laboratory achieve more.

<div><div id="title-a9e634f6cb" data-locator="title-with-text"><h3><strong>The power of knowing now</strong></h3></div></div><div><div id="text-c687cac6aa" data-locator="text"><p><strong>Whether you are looking to improve your drug discovery cycle, expand your client services, or simply become more competitive in your turnaround times, integrating direct mass spectrometry (MS) analysis can drive multiple system-wide efficiencies helping to achieve your operational goals.</strong></p><p>Combining flexibility, ease of operation, and speed without the need for complex sample preparation, separation or extensive MS experience, the RADIAN ASAP helps you and your laboratory achieve more.</p><ul><li>Simple operation and data interpretation</li><li>Minimal sample preparation</li><li>No separation required</li><li>Real-time results and classification</li></ul><figure class="image"><img style="aspect-ratio:454/321;" src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_RADIAN_ASAP_7cfe24b23d/Waters-RADIAN-ASAP_s.webp" alt="Waters RADIAN ASAP Direct Mass Detector" width="454" height="321"></figure><h3><strong>Overview</strong></h3><div data-locator="section-container-body"><div><div><div data-locator="layoutcontainer-"><div><div id="text-6b896f6da4" data-locator="text"><ul><li>Ensure users get up and running quickly with RADIAN ASAP’s easy to learn and fully automated set up, streamlined workflow, and minimal training requirements</li><li>Minimize sample prep with direct sampling onto glass probe</li><li>Minimize the need for solvent use and disposal with no chromatography</li><li>Save time with 30 second analysis and real-time sample classification</li></ul></div></div><div><div id="text-161a2a5c01" data-locator="text"><h4><strong>Recommended Use</strong></h4><p>For rapid, easy, and low-cost analysis of liquids and solids.</p><div><div id="text-4973311325" data-locator="text"><h3 data-locator="modal-title"><strong>Compact without compromise</strong></h3><p>The RADIAN ASAP is a novel, dedicated direct analysis system specifically designed for rapid, easy and low-cost analysis of liquids and solids. Engineered using proven and robust single quadrupole mass spectrometry technology combined with the Atmospheric Pressure Solids Analysis Probe (<a target="_blank" rel="noopener noreferrer" href="https://www.waters.com/nextgen/us/en/services/instrument-services/instrument-upgrades/mass-spectrometry-ms-upgrades/atmospheric-solids-analysis-probe.html" data-di-id="di-id-70d78c77-7e033f9d">ASAP</a>), the RADIAN ASAP delivers quality and ease of use in a compact footprint.&nbsp;</p><p>This single quadrupole mass detector provides high quality mass spectral data, without the need for any special training or expertise, eliminating any need to contract out and wait for results from specialist analytical service laboratories.</p></div></div><div><div id="text-08366f2c0d" data-locator="text"><h3 data-locator="modal-title"><strong>Flexible workflow solutions in 4 simple steps</strong></h3><p>Operation of the RADIAN ASAP is simple and intuitive, allowing users to generate results with minimal or no sample preparation, making it an ideal tool for laboratories to make informed decisions. Capable of ionizing molecules directly from a liquid or solid makes the system available to a wide range of applications and workflows.</p><h4><strong>Generate results in 4 simple steps:</strong></h4><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_RADIAN_ASAP_analyza_ve_4_jednoduchych_krocich_a997bfddda/Waters-RADIAN-ASAP-analyza-ve-4-jednoduchych-krocich.jpg" alt="Waters RADIAN ASAP Direct Mass Detector: Flexible workflow solutions in 4 simple steps" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_RADIAN_ASAP_analyza_ve_4_jednoduchych_krocich_a997bfddda/thumbnail_Waters-RADIAN-ASAP-analyza-ve-4-jednoduchych-krocich.jpg 245w," sizes="100vw" width="1683" height="490"></p><h3><strong>Ideal for numerous application requirements</strong></h3><p><a target="_blank" rel="noopener noreferrer" href="https://www.waters.com/waters/nav.htm?cid=135078611" data-di-id="di-id-7f758d90-ccee23de"><strong>Rapid triage of seized drug materials for Forensics</strong></a><i>&nbsp;<strong>—</strong>&nbsp;</i>RADIAN ASAP and LiveID ensure crime labs can quickly screen samples against a library of known compounds for rapid, confident identification of illicit drugs. The sensitivity and selectivity of mass spectrometry provides confidence in detecting drugs with an easy, efficient triage workflow.</p><p><a target="_blank" rel="noopener noreferrer" href="https://www.waters.com/waters/nav.htm?cid=134528742" data-di-id="di-id-3a3c46e4-ccee23de"><strong>Assess food integrity for Food &amp; Environmental</strong></a>&nbsp;<strong>—</strong> The threat posed by food fraud has created additional demands on both the food industry and regulators to protect food consumers and maintain brand reputation. RADIAN ASAP and LiveID offer a powerful combination of mass spectrometry and chemometric modeling, allowing users to easily and efficiently screen samples and make quicker decisions.</p><p><a target="_blank" rel="noopener noreferrer" href="https://www.tainstruments.com/radian-asap-direct-mass-detector/" data-di-id="di-id-2fac456-44144a9d"><strong>Fast chemical analysis for improved formulation testing in Chemical and Materials</strong></a><i>&nbsp;<strong>—</strong>&nbsp;</i>RADIAN ASAP and IonLynx supports quality control (QC) and development labs in the chemical industry to reduce costs and increase efficiencies. Streamline workflows like fast chemical analysis for improved formulation testing or&nbsp;material release testing. Features including thermal gradient analysis are ideal for the complex samples in the chemical industry.</p><p><a target="_blank" rel="noopener noreferrer" href="https://www.waters.com/waters/nav.htm?cid=134751395" data-di-id="di-id-76921eaa-ccee23de"><strong>Discovery reaction monitoring&nbsp;for Pharma</strong></a>&nbsp;<strong>—</strong> The demand to accelerate the drug discovery and development process has never been higher.&nbsp;RADIAN ASAP provides synthetic chemists easy access to mass spectral data for near-instantaneous assessment of reaction progress and identification of purification fractions, increasing lab efficiency.</p><div><div><div><div id="text-8b0fa56c8c" data-locator="text"><p><a target="_blank" rel="noopener noreferrer" href="https://www.waters.com/waters/nav.htm?cid=134971387" data-di-id="di-id-10e51f17-ccee23de"><strong>Undergraduate teaching&nbsp;and method development&nbsp;in Academia</strong></a><strong> —&nbsp;</strong>Simplicity and ease of use makes RADIAN ASAP the ideal tool for busy academic laboratories that need a robust and reliable solution.</p><figure class="image"><img style="aspect-ratio:474/308;" src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_RADIAN_ASAP_2_87ddc46f15/Waters-RADIAN-ASAP-2_s.webp" alt="Waters RADIAN ASAP Direct Mass Detector" width="474" height="308"></figure><div><div id="text-a5e5e26910" data-locator="text"><h3 data-locator="modal-title"><strong>Software solutions for your data requirements</strong></h3><p><strong>RADIAN ASAP</strong> is compatible with software solutions for rapid interpretation and classification as well as automated data processing and reporting.</p><p>For customers investigating the authenticity, adulteration, and quality of food or raw materials, <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=5&amp;search=liveid"><strong>LiveID</strong></a> uses statistical models to classify samples. First, authentic or verified samples are used to create and validate a statistical model. The validated model can then be used with test samples and generate live classifications with a simple yes/no answer output. LiveID can also do real time <strong>library</strong> matching workflows, where the software matches all compounds in the library against each sample analyzed, giving a score out of <strong>1000</strong>, where values close to 1000 indicate the compound of interest is likely in the sample and lower scores indicate unlikely presence in the sample.</p><p><strong>OpenLynx</strong> processing provides user customizable processing capabilities to generate automated mass confirmation reports in either pdf, printed or browser format.&nbsp;</p><p><strong>IonLynx</strong> allows users to determine levels and relative ratios of analytes of interest in complex samples to aid decision making in QC and formulation monitoring. IonLynx provides automated processing and reporting of non-chromatographic data sets, such as those generated by RADIAN ASAP.</p></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div>

Products focused on LC/SQ from Waters - page 1

Related content

Refrigerated SpeedVac SRF110 vs. CentriVap - Why Sample Capacity Matters More Than Ever for Peptide and Protein Labs

What Attracts Molecules? A New Generation of a CEITEC Tool Makes the Forces Between Atoms Visible

Study reveals an unexpectedly large contribution to air pollution from soils