Analysis of polynuclear aromatic hydrocarbons (PAH)

APPLICATION NOTE Analysis of base neutrals (USEPA 625) BPX5 Column part number 054113 Phase BPX5 Final temperature 310°C, 10 min Column 25 m x 0.22 mm x 0.25 μm Detector FID Initial temperature 50°C, 2 min Injection mode Split Rate…

APPLICATION NOTE Analysis of polynuclear aromatic hydrocarbons (PAH) BPX5 Column part number 054142 Phase BPX5 Final temperature 380°C, 20 min Column 30 m x 0.22 mm x 0.25 µm Carrier gas He, 20 psi Initial temperature 100°C, 1 min Detector…

APPLICATION NOTE Analysis of USEPA 8270 mix BPX5 Column part number 054101 Phase BPX5 Carrier gas flow 1.1 mL/min Column 30 m x 0.25 mm x 0.25 μm Constant flow On Sample 5 ppm solution Injection mode Splitless Initial temperature…

APPLICATION NOTE Analysis of polynuclear aromatic hydrocarbons (PAH) BPX50 Column part number 054751 Phase BPX50 Constant flow On Column 30 m x 0.25 mm x 0.25 μm Average linear velocity 39 cm/sec at 65°C Sample 10 ng/μL in dichloromethane Injection…