Chlorinated compounds in ethylene - Analysis of impurities in ethylene

Halogenated compounds and CO2 in ethylene Application Note Materials Testing & Research Authors Introduction Agilent Technologies, Inc. GC/MS analysis of impurities (halogenated and carbon dioxide) in ethylene is achieved in seven minutes with an Agilent CarboBOND column. Conditions Technique :…

Hydrocarbons, C1 – C3 Analysis of hydrocarbons in ethylene Application Note Materials Testing & Research Authors Introduction Agilent Technologies, Inc. Acetylene is an impurity that must be quantified at low levels in high-purity ethylene, often alongside carbon monoxide and carbon…

C2-C3 hydrocarbons Analysis of hydrocarbons in air Application Note Environmental Authors Introduction Agilent Technologies, Inc. GC/MS analysis of C2 to C3 hydrocarbons in air is achieved in 5.5 minutes with an Agilent CarboBOND column. Conditions Technique : GC Column :…

Gases, hydrocarbons, C1 – C3 Application Note Energy & Fuels Authors Introduction Agilent Technologies, Inc. Agilent CarboBOND elutes acetylene in front of ethylene, allowing accurate quantification of ppm levels of acetylene in high-purity ethylene. This analysis is usually done on…