GC, GC columns, Consumables
IndustriesEnvironmental
ManufacturerAgilent Technologies
Significance of the Topic
Volatile halogenated hydrocarbons and aromatic compounds are widespread environmental pollutants with significant health and safety concerns. Reliable analysis of these substances is critical for regulatory compliance, environmental monitoring, and quality control in industrial and research laboratories.
Objectives and Overview of the Study
This application note demonstrates a gas chromatographic method capable of separating ten volatile halogenated hydrocarbons and select aromatic compounds within a 20-minute runtime. The goal is to provide a robust, reproducible protocol suitable for routine screening and quantification in environmental samples.
Methodology
The separation was achieved using capillary gas chromatography with a slow oven temperature ramp. A headspace injection introduced 30 µL of sample into the column. Nitrogen served as the carrier gas, providing stable flow conditions.
Applied Instrumentation
- Gas chromatograph configured for capillary operation
- Agilent CP-Wax 57 CB fused silica WCOT column (0.32 mm ID, 1.2 µm film)
- On-column injector maintained at 200 °C
- Flame ionization detector at 200 °C with sensitivity of 32×10-12 Afs
- Nitrogen carrier gas at 200 kPa (flow ~16 cm/s)
Main Results and Discussion
The method achieved baseline resolution of the following analytes in under 20 minutes:
- Tetrachloromethane
- Dichloromethane
- Benzene
- Trichloroethene
- Trichloromethane
- Toluene
- Ethylbenzene
- p-Xylene
- m-Xylene
- o-Xylene
The linear temperature gradient of 1 °C/min from 60 °C to 120 °C ensured sharp peak shapes and consistent retention times. No significant carryover or coelution was observed.
Benefits and Practical Applications
- Rapid screening of volatile organics in air, water, and soil matrices
- High reproducibility for routine quality assurance and regulatory testing
- Compatibility with standard GC instrumentation in environmental laboratories
Future Trends and Possibilities for Use
Advances may include integration with mass spectrometric detection for enhanced sensitivity, faster ramp protocols for high-throughput analysis, and miniaturized columns for field-deployable systems. Automated headspace sampling and data processing will further streamline workflows.
Conclusion
The described capillary GC method using an Agilent CP-Wax 57 CB column provides a fast, reliable, and easily implemented solution for separating key halogenated hydrocarbons and aromatics in environmental analysis.
Content was automatically generated from an orignal PDF document using AI and may contain inaccuracies.