LC/MS, LC/MS/MS, LC/QQQ
IndustriesFood & Agriculture
ManufacturerShimadzu
Analysis of Nivalenol, Deoxynivalenol and Their Metabolites by LC/MS/MS
Importance of the Topic
The fusarium mycotoxins nivalenol and deoxynivalenol pose significant health risks through contaminated cereals. Regulatory bodies have established provisional limits to protect consumers, making reliable and sensitive analytical methods essential for food safety monitoring and quality control.
Objectives and Study Overview
This work aims to develop a high-sensitivity, simultaneous LC/MS/MS method for quantifying nivalenol, deoxynivalenol, 3-acetyl-deoxynivalenol and 15-acetyl-deoxynivalenol. The method is validated for repeatability, linearity and applicability to real wheat samples using trace-level standards well below regulatory reference values.
Methodology and Instrumentation
- Instrument: Shimadzu LCMS-8050 triple quadrupole mass spectrometer
- Chromatography: Shim-pack XR-ODS III column (150 mm × 2.0 mm, 2.2 μm) at 40 °C, flow rate 0.3 mL/min
- Mobile phases: A = 0.5 mmol/L ammonium acetate in water, B = acetonitrile; gradient from 5% to 95% B in 7 min
- Ionization: Heated electrospray ionization in negative mode (ESI-), MRM transitions optimized for each analyte
- Injection volume: 2 μL
- Sample preparation: Wheat ground to <1000 μm and extracted with water/acetonitrile 15:85 v/v, purified by multifunction SPE (MultiSep #227 or Autoprep MF-T), nitrogen evaporation, reconstitution in water/acetonitrile/methanol 90:5:5 v/v/v
Main Results and Discussion
- Repeatability: At 10 ppb standards, retention time RSD ≤0.06% and peak area RSD ≤6.5%
- Linearity: Calibration curves from 1 to 250 ppb yielded R2 >0.999 for all four analytes
- Sensitivity: Low-level quantification demonstrated at 1/100 of the provisional reference (approx. 10 ppb) with no significant background interference
- Matrix performance: In wheat extracts spiked at 25 ppb, recovery rates ranged from 101 % to 107 % without notable matrix suppression; both SPE cleanup kits gave equivalent results
Benefits and Practical Applications
- Simultaneous quantification of parent and acetylated mycotoxins in a single run improves throughput
- High sensitivity and reproducibility support compliance testing and routine quality control in cereal safety labs
- Simple sample preparation with commercially available SPE cartridges facilitates adoption in regulated environments
Future Trends and Opportunities
Analytical demands will drive further enhancements in throughput through ultrahigh-performance LC columns and shorter gradients. Emerging high-resolution mass spectrometry may complement triple quadrupole MRM for untargeted screening of novel mycotoxin derivatives. Automation of sample cleanup and data processing will continue to streamline mycotoxin surveillance in food supply chains.
Conclusion
The described LC/MS/MS method offers robust, sensitive and reproducible analysis of nivalenol, deoxynivalenol and their acetylated metabolites in cereal matrices. It meets regulatory requirements for trace-level detection and supports effective mycotoxin management in the food industry.
Instrumentation Used
- Shimadzu LCMS-8050 triple quadrupole mass spectrometer
- Shim-pack XR-ODS III column
- MultiSep #227 and Autoprep MF-T multifunction SPE cartridges
Reference
- Ministry of Health, Labour and Welfare Japan. Notification No. 0521001, May 21, 2002.
- Ministry of Health, Labour and Welfare Japan. Notification No. 0717001, July 17, 2003.
Content was automatically generated from an orignal PDF document using AI and may contain inaccuracies.