Low Level PPB Detection of 19 VOCs in WaterUsing the CMS5000 Monitoring System

Applications | 2009 | INFICONInstrumentation
GC, Purge and Trap
Industries
Environmental
Manufacturer
INFICON

Importance of the Topic


On-site monitoring of VOCs in water systems ensures early detection of potentially harmful contaminants, enabling proactive management of water safety and regulatory compliance.

Aims and Overview of the Study


This application note evaluates the CMS5000 Monitoring System for quantitative detection of 19 common volatile organic compounds (VOCs) at low parts-per-billion levels, focusing on system accuracy, precision, and sensitivity.

Methodology and Instrumentation


A three-point calibration was performed by spiking 2 L of VOC-free water with 1.0, 5.0, and 10.0 ppb standards. Analytes were purged with argon into the CMS5000 headspace collection tube, concentrated on an on-board Tri-Bed concentrator, thermally desorbed, and separated on an HP-1MS capillary column (30 m × 0.32 mm, 4 μm film). Detection employed Micro Argon Ionization Detection (MAID). A 20-minute GC temperature program and quadratic fit calibration generated quantitative data.

Main Results and Discussion


  • Recoveries for the 19 analytes ranged from 94 % to 106 %, demonstrating high quantitative accuracy.
  • Benzene precision at 1.0 ppb yielded an RSD of 2.7 % over five replicates, indicating strong reproducibility.
  • Chromatographic separation was achieved within 20 minutes, with co-elution observed only for m- and p-xylene.

Benefits and Practical Applications


  • Delivers individual VOC identification and quantitation, offering more actionable insights than aggregate Total Organic Carbon measurements.
  • Supports real-time, on-site water quality surveillance in industrial, environmental, and municipal settings.
  • High sensitivity and precision facilitate compliance testing and rapid hazard assessment.

Future Trends and Opportunities


Integration of advanced data analytics, such as AI-driven peak identification, and expansion of monitored analyte libraries will enhance system capabilities. Developments in concentrator materials and miniaturized components may further reduce detection limits and analysis times, enabling broader deployment in remote or resource-limited locations.

Conclusion


The CMS5000 Monitoring System offers reliable low-ppb detection of 19 key VOCs in water, combining robust accuracy, precision, and rapid analysis to support proactive water quality management.

References


  1. INFICON. Low Level PPB Detection of 19 VOCs in Water Using the CMS5000 Monitoring System. Application Note, 2009.

Content was automatically generated from an orignal PDF document using AI and may contain inaccuracies.

Downloadable PDF for viewing
 

Similar PDF

Analysis of 58 Volatile Organic Compounds Using Two CMS5000 Monitoring Systems
Routine analysis of volatile organic compounds in drinking water with ISQ 7000 GC-MS
Uninterrupted analysis of volatile organic compounds in drinking water using single quadrupole GC-MS
Analysis of volatile organic compounds in soil using purge and trap coupled to single quadrupole GC-MS