Solvents - Determination of water in solvents

Applications | 2011 | Agilent TechnologiesInstrumentation
GC, GC columns, Consumables
Industries
Energy & Chemicals
Manufacturer
Agilent Technologies

Význam tématu


Ensuring low water content in solvents is essential to maintain chemical reaction integrity and product quality. Water traces can alter reaction kinetics, compromise purification steps and affect analytical accuracy.

Cíle a přehled studie / článku


This application note demonstrates a rapid gas chromatographic method for quantifying water in common organic solvents. The objective was to achieve baseline separation of water from six solvents within a five minute runtime using a CP-Sil 5 CB capillary column.

Použitá metodika a instrumentace


The analysis employed the following setup:
  • Chromatographic technique: GC-capillary
  • Column: Agilent CP-Sil 5 CB, 0.53 mm × 50 m, 5.0 µm
  • Temperature: 60 °C (oven), 150 °C (injector and TCD)
  • Carrier gas: hydrogen at 30 kPa
  • Injection: direct 1:100 split (0.5 µL sample)
  • Detector: thermal conductivity detector (TCD)
  • Concentration range: 0.5 % v/v water in solvent

Hlavní výsledky a diskuse


The method achieved clear resolution between water and six solvents within five minutes. Key observations included:
  • Retention order: air, water, methanol, ethanol, acetone, dichloromethane, isopropyl ether, tetrahydrofuran
  • Sharp, symmetrical peaks with no significant coelution
  • Reproducible retention times and peak areas at 0.5 % water levels

Přínosy a praktické využití metody


This approach offers rapid turnaround for routine quality control of solvent water content. Minimal sample preparation, short analysis time and use of standard GC instrumentation make it suitable for industrial and research laboratories.

Budoucí trendy a možnosti využití


Potential advances include method adaptation for trace-level detection, integration with automated sampling systems, and application to a wider range of polar solvents. Coupling with mass spectrometry could further improve specificity.

Závěr


A fast and reliable GC method for water determination in organic solvents was established. The protocol provides efficient solvent quality assessment with high throughput and accuracy.

Reference


Agilent Technologies Inc. Application Note A00585 Determination of water in solvents. Printed October 31 2011.

Content was automatically generated from an orignal PDF document using AI and may contain inaccuracies.

Downloadable PDF for viewing
 

Similar PDF

Solvents - Determination of water in solvents
Solvents - Determination of water in solvents
2010|Agilent Technologies|Applications
Solvents - Analysis of industrial waste water
Solvents - Analysis of industrial waste water
2011|Agilent Technologies|Applications
Solvents
Solvents
2011|Agilent Technologies|Applications
Solvents - Analysis of impurities in ethanol
Solvents - Analysis of impurities in ethanol
2011|Agilent Technologies|Applications