Impurities in propylene

C1-C5 hydrocarbons Analysis of standard mixture of C1-C5 hydrocarbons Application Note Energy & Fuels Authors Introduction Agilent Technologies, Inc. In petrochemical application often ppm levels of impurities must be measured in hydrocarbon streams. The response for such low levels must…

C1 – C4 hydrocarbons Analysis of acetylenes mixture Application Note Energy & Fuels Authors Introduction Agilent Technologies, Inc. Often ppm levels of hydrocarbon impurities must be measured and the response for such low levels must be accurate and reproducible over…

Impurities in 1,3 butadiene Application Note Materials Testing & Research Authors Introduction Agilent Technologies, Inc. Selectivity of the Agilent Select Al2O3 MAPD column is very good for separating impurities in 1,3 butadiene by GC. Conditions Technique : GC Column :…

C1 – C4 hydrocarbons Application Note Energy & Fuels Authors Introduction Agilent Technologies, Inc. GC analysis of C1 - C4 hydrocarbons is achieved in 15 minutes using the Agilent Select Al2O3 MAPD. Conditions Technique : GC Column : Agilent Select…