Moisture Control System (MCS) By-Pass Line

Restek MSD Conversion Fitting (cat.# 21314) This MSD Conversion Fitting is used to convert your source fittings for use with standard nuts and ferrules. This design uses Vespel® /graphite ferrules and inexpensive 1/16-inch nuts instead of the costly instrument manufacturers…

EZ Twist Top™ Split/Splitless Injection Ports For Agilent 7890 GCs cat.# 22175, 22176, 22177, 22178 Before Starting: 1. Turn off the main power to the instrument and unplug the power cord from the receptacle. Allow adequate time for the instrument’s…

Capillary-Grade Hydrocarbon Trap /8-inch tube compression fittings–cat.# 21991 /4-inch tube compression fittings–cat.# 21992 Capillary-Grade Hydrocarbon Trap /8-inch tube compression fittings–cat.# 21991 /4-inch tube compression fittings–cat.# 21992 1 1 1 1 Maximum Operating Pressure: 250 psi Maximum Operating Temperature: 100 °C…

Installing a Uniliner® Liner without an Adaptor in a Standard Packed Column Injection Port Overview These instructions are to be used ONLY if an adaptor cannot be used. A stainless steel Reducing Kit (cat.# 20312) or a reducing ferrule should…