Consumables, ICP/MS, ICP-OES
IndustriesManufacturerSavillex
Importance of the Topic
The design and material of spray chambers in ICP-OES and ICP-MS significantly affect analytical performance, including sensitivity, stability, and washout. The introduction of a PFA cyclonic spray chamber using stretch blow molding addresses common limitations of machined inert chambers, offering enhanced visibility, optimized internal geometry, and improved trace metal background.
Study Objectives and Overview
This study presents the development and evaluation of the Savillex PFA cyclonic spray chamber (CSC) for ICP-OES and ICP-MS. Key aims include replicating the performance of glass/quartz cyclones in an inert material, enabling modular use across instruments, and illustrating the benefits of surface treatments on sensitivity.
Methodology and Instrumentation
The PFA CSC, nominal volume 50 mL, is produced via stretch blow molding, resulting in thin translucent walls and a smooth surface. The chamber integrates a molded spoiler for directed droplet drainage and interchangeable exit ports with or without baffles. A PFA insert around the nebulizer tip minimizes dead volume. Surface wettability was modified using an organic-based treatment to reduce contact angle from 110° to approximately 60°.
Used Instrumentation
- ICP-OES systems with 12/5 socket connectors
- ICP-MS instruments compatible with exit ports featuring twin gas lines
- Savillex C-Flow nebulizer range
Main Results and Discussion
The untreated PFA CSC demonstrated excellent signal stability and low background. The treated version increased sensitivity by about 40%, matching top-performing glass or quartz cyclonic chambers in ICP-MS. The optimized internal design effectively prevents large droplet formation and re-nebulization, improving washout and aerosol transport.
Advantages and Practical Applications
- Modular compatibility across multiple ICP platforms
- Visual inspection during operation due to translucent walls
- Enhanced washout and reduced contamination from carryover
- High chemical inertness for ultratrace analysis in semiconductor and environmental testing
Future Trends and Potentials
Advancements may include further surface treatments to tailor wettability, integration with automated nebulizer systems, and customization for emerging microplasma and miniaturized ICP devices. Continued material innovations could yield chambers with even lower background and improved thermal stability.
Conclusion
The Savillex PFA CSC leverages stretch blow molding to deliver a robust, inert, and high-performance alternative to traditional glass/quartz chambers. Its modular design, combined with optional surface treatment, meets diverse analytical needs and supports both ultratrace and high-sensitivity applications.
Content was automatically generated from an orignal PDF document using AI and may contain inaccuracies.