Design Features of the HPX Series Inert Hotplate

Technical notes | 2017 | SavillexInstrumentation
Sample Preparation
Industries
Manufacturer
Savillex

Importance of the Topic


Uniform temperature during sample digestion and evaporation is critical in trace metals analysis to ensure reproducible results and avoid analytical bias. Optimized heating surfaces enhance data quality by delivering consistent thermal exposure across multiple samples.

Objectives and Study Overview


This technical note evaluates the design features of the Savillex HPX Series inert hotplates, focusing on their ability to achieve superior temperature uniformity. The HPX-100 and HPX-200 models are benchmarked against a competitive laboratory hotplate and a domestic cooking griddle to illustrate performance differences.

Methodology and Instrumentation


Surface temperatures were measured using a FLIR E60 infrared thermal imaging camera set to 150 °C. Each hotplate was allowed to stabilize before capturing thermal images over a grid of 35 evenly spaced points.

  • Savillex HPX-100 and HPX-200 inert hotplates
  • Competitive laboratory hotplate
  • Domestic PTFE-coated aluminum griddle
  • FLIR E60 infrared thermal camera

Main Results and Discussion


The HPX-100 achieved an average surface temperature of 151.9 °C with a range of ±2 °C, meeting its specification of ±2 °C at 150 °C. The competitor hotplate exhibited wider variation (±3.4 °C) and distinct hotspots corresponding to its two heating elements. The domestic griddle showed extreme non-uniformity (±13.8 °C) and visible looped-element patterns. Higher cartridge heater density (three in HPX-100, four in HPX-200) combined with ISO-molded low-porosity graphite resulted in faster heat-up time and more even temperature distribution. The dense graphite substrate also enabled a high-integrity PFA coating, preventing corrosion and minimizing sample cross-contamination.

Benefits and Practical Applications


Enhanced thermal uniformity ensures consistent sample treatment during acid digestion and evaporation, reducing analytical bias in trace metal workflows. The smooth, coated graphite surface extends hotplate longevity and simplifies cleaning, supporting rigorous QA/QC protocols and high-throughput laboratory operations.

Future Trends and Applications


Next-generation systems may incorporate distributed temperature sensors and adaptive control algorithms for real-time adjustments. Exploration of alternative inert substrates and advanced coating techniques could further expand chemical compatibility. Adaptive heating arrays may enable personalized thermal profiles tailored to specific sample loads.

Conclusion


The Savillex HPX Series inert hotplates outperform conventional lab devices and domestic griddles by leveraging increased heater density and premium graphite construction. These innovations deliver unmatched temperature uniformity, reliability, and operational lifetime for critical analytical procedures.

Content was automatically generated from an orignal PDF document using AI and may contain inaccuracies.

Downloadable PDF for viewing
 

Similar PDF

HPX Series Inert Hotplate
HPX Series Inert Hotplate
2019|Savillex|Brochures and specifications
CLEAN SAMPLE PREP
CLEAN SAMPLE PREP
2017|Savillex|Brochures and specifications
Design Features of Purillex® PFA and FEP Bottles
Vial Cleaning System
Vial Cleaning System
2015|Savillex|Brochures and specifications