Analysis of Dithiocarbamate Pesticides in Water Using Headspace-GC/MS

Applications | 2016 | ShimadzuInstrumentation
GC/MSD, HeadSpace, GC/SQ
Industries
Environmental
Manufacturer
Shimadzu

Importance of the Topic


Monitoring dithiocarbamate pesticides in water is critical due to their widespread agricultural use and potential health risks. These compounds degrade to carbon disulfide under acidic conditions, making it a practical marker for regulatory compliance. The Japanese Ministry of Health, Labour and Welfare has specified a headspace-GC/MS method as a reference for drinking water quality standards.

Study Objectives and Overview


The primary goal of this investigation was to evaluate a headspace-GC/MS protocol for quantifying carbon disulfide in water, reflecting the decomposition of key dithiocarbamate pesticides such as zineb, ziram, thiram, propineb, polycarbamate, mancozeb, and maneb. The study followed Appendix Method 24, focusing on sensitivity, linearity, and repeatability across relevant concentration ranges.

Methodology


Standard solutions were prepared by diluting carbon disulfide in methanol to create a stock of 10 mg/mL, followed by serial dilutions to concentrations between 0.2 and 5 μg/mL, with 12.5 μg/mL fluorobenzene as an internal standard. Water samples (10 mL) were spiked to yield CS2 levels from 0.04 to 1 μg/L. Sample vials contained 3 g NaCl and 10 μL HCl to promote decomposition, were heated at 100 °C for one hour, then equilibrated before analysis.

Used Instrumentation


  • Headspace sampler: HS-20 (Loop mode, 1 mL)
  • Gas chromatograph-mass spectrometer: GCMS-QP2010 Ultra
  • Column: Rtx-624, 60 m × 0.32 mm I.D., 1.8 μm
  • GC conditions: split injection (10:1), constant linear velocity (40 cm/s), oven program 40 °C (5 min) to 230 °C at 20 °C/min (3 min)
  • MS conditions: SIM mode, ion source 200 °C, interface 230 °C, event time 0.3 s

Main Results and Discussion


Total ion current scans confirmed effective separation of CS2 from matrix components. SIM detection at 0.04 μg/L yielded clear peaks with high signal‐to‐noise. Calibration was linear over 0.04–1 μg/L (R=0.9999). Repeatability tests at 0.04 μg/L (n=5) showed 2.87 % variation, demonstrating excellent precision.

Benefits and Practical Applications


The headspace-GC/MS approach offers:
  • High sensitivity for trace-level CS2 detection
  • Robust quantification meeting regulatory limits
  • Minimal matrix interference via volatile compound separation
  • Applicability to routine water quality monitoring

Future Trends and Potential Applications


Advancements may include coupling with automated sample preparation, MS/MS detection for enhanced selectivity, and field-deployable headspace units. Expanding this method to other acid-labile pesticides and integrating data analytics could further streamline water safety assessments.

Conclusion


The validated headspace-GC/MS method provides a reliable and reproducible analysis of carbon disulfide in water, enabling accurate monitoring of dithiocarbamate pesticide residues in compliance with drinking water standards.

References


  • Shimadzu Corporation. Analysis of Dithiocarbamate Pesticides in Water Using Headspace-GC/MS (LAAN-J-MS-E112), First Edition: October 2016.

Content was automatically generated from an orignal PDF document using AI and may contain inaccuracies.

Downloadable PDF for viewing
 

Similar PDF

Data on Tap Water Quality Standards
Data on Tap Water Quality Standards
2009|Shimadzu|ApplicationsGuides
Analysis of VOCs in Water Using Headspace-GC/MS
Analysis of Dithiocarbamate Pesticides by GC-MS
Analysis of Dithiocarbamate Pesticides by GC-MS
2012|Thermo Fisher Scientific|Applications
Analysis of Dithiocarbamate Pesticides by GC-MS
Analysis of Dithiocarbamate Pesticides by GC-MS
2012|Thermo Fisher Scientific|Applications