The Measurement of Silicon, Tin, and Titanium in Jet-Engine Oil

Application Note Petrochemicals High-Throughput Analysis of AdditiveElements and Wear Metals in Lubricants by ICP-OES Fast analysis times using the Agilent 5900 ICP-OES with AVS and oil autosampler referencing ASTM D5185-18 Author Paul D. Krampitz Agilent Technologies, Inc. Introduction Tribology is…

Flame and Graphite Furnace Atomic Absorption Spectroscopy Application Compendium Table of Contents Solutions for Common AAS Problems 3 Determination of Cu, Fe, K, Mg, Mn, Na and Zn in Food Using AAS in Fast Sequential mode 6 Rapid Determination of…

Determination of Metals in Lubricating Oil by ICP-OES Application Note Inductively Coupled Plasma-Optical Emission Spectrometers Authors Introduction Tran T. Nham Metals in lubricating oil can come from various sources, such as wear, contamination and additives. Wear metals result from friction…

January 2021 Edition Flame Atomic Absorption Spectroscopy Method Development ePrimer AGILENT TECHNOLOGIES > Search entire document CONTENTS 1. Introduction 4 Lu (Lutetium) 28 Agilent’s Flame AA instruments 4 Mg (Magnesium) 29 Fast Sequential AA 4 Mn (Manganese) 30 PROMT 6…