C196-E099
High Performance Liquid Chromatograph
i-Series
Specifications
i-Series Specifications
Other Options
P/N
Description
Part Name
S228-56298-41
S228-55518-41
S228-55517-41
S228-55519-41
This kit is used to reinforce how the reservoir tray is attached.
This board is used to install additional connectors for optical link cables.
It is used to install fluorescence detector RF-20A series and other detectors.
This camera is installed inside autosamplers.
It allows you to monitor the needle action via the computer screen.
This is an analog-digital converter board. It is used to input the detector signal
as an analog signal, such as when a non-Shimadzu detector is connected.
Earthquake Reinforcement Kit
Optional Optical Board
Camera ASSY for Autosampler
Optional AD Board
S228-26004-44
S228-26004-43
This kit includes FCV-14AH for up to six columns switching and other parts.
This kit includes FCV-14AH for up to six columns switching, FCV-11AL for solvent delivery of seven
mobile phases and other parts.
Smart Automation Kit
(4-mobile phase)
S228-38583-42
This is a set of five one-liter reservoir bottles for holding mobile phases.
1 L Mobile Phase Bottles
(set of 5)
S228-56245-41
This kit contains a top plate and reservoir tray for installing an additional detector.
Optional Detector Attachment
Kit
Smart Automation Kit
(7-mobile phase)
Touch Panel Protecting Sheet
Upgrade Kit UV
Upgrade Kit PDA
Protecting sheet for touch panel.
Kit for upgrade from LC-2050 (UV model with sample cooler) to LC-2060.
Kit for upgrade from LC-2050 (PDA model) to LC-2060.
S228-59212-41
S228-58993-41
S228-58993-42
• Automated support functions utilizing digital technologies, such as M2M, IoT, and
Artificial Intelligence (AI), that enable higher productivity and maximum reliability.
• Allows a system to monitor and diagnose itself, handle any issues during data acquisition
without user input, and automatically behave as if it were operated by an expert.
• Supports the acquisition of high quality, reproducible data regardless of an operator's skill
level for both routine and demanding applications.
Analytical Intelligence logo, LabSolutions and LCsolution are trademarks of Shimadzu Corporation.
Hastelloy is a registered trademark of Haynes International, Inc.
For Research Use Only. Not for use in diagnostic procedures.
This publication may contain references to products that are not available in your country. Please contact us to check the availability of
these products in your country.
Company names, products/service names and logos used in this publication are trademarks and trade names of Shimadzu Corporation,
its subsidiaries or its affiliates, whether or not they are used with trademark symbol “TM” or “®”.
Third-party trademarks and trade names may be used in this publication to refer to either the entities or their products/services, whether
or not they are used with trademark symbol “TM” or “®”.
Shimadzu disclaims any proprietary interest in trademarks and trade names other than its own.
Shimadzu does not assume any responsibility or liability for any damage, whether direct or indirect, relating to the use of this publication.
www.shimadzu.com/an/
© Shimadzu Corporation, 2020
First Edition: November 2020 3655-10021-PDFNS
Use of Multiple Detectors Expands
Application Range
Excellent Baseline Stability Unaffected
by Circumstances
Supports High-Speed Multi-Analyte Processing
Autosampler Enhances Data Reliability
Auto Shutdown Function
Reduces Power
Consumption
Maximum Reliability and Stability
— Fundamental functions assure analysis results —
Open Access Sample Placement
System Monitoring via Smart Devices
Window on a Smartphone
In addition to the UV-visible (UV/VIS) absorbance detector or
photodiode array (PDA) detector included as standard, a fluorescence
detector or differential refractive index detector can be added.
Large-Capacity Column
Oven Supports Up to 90°C
The Forced-air circulation method
enhances column temperature
stability. Maximum operating
temperature of 90°C allows
high-temperature analyses such as
sugar analysis. Moreover, three 300
mm long columns or six 100 mm long
columns can be accommodated.
Quaternary Solvent
Delivery Unit
A 10 μL micro plunger ensures
accurate quaternary gradient
delivery. Optional reservoir switching
valve further extends the solvent
selection to seven so that the solvent
for the flow path rinsing can be set.
The UV/VIS detector and the PDA detector employ dual-temperature
control (TC-Optics and flow cell) and provide measurements with a
stable baseline hardly affected by room temperature fluctuation.
Excellent reproducibility for injection volumes less than 1 μL,
wide linearity range and ultra-low carryover (<0.0025%) improve
the reliability of data, especially for analyses of precious
biological samples and direct analyses of concentrated samples.
Compact Footprint
The i-Series brings together all the functions required for LC analysis in an integrated form. With its space-saving design,
which is only 410 mm wide, three units can be installed on a laboratory bench compared to only two comparable
instruments from other companies. The instrument footprint does not change even if another detector is installed.
After analysis is complete, the auto
shutdown function minimizes power
consumption in standby mode and
can reduce power consumption by at
least 95% compared to normal
standby mode.
A 14-second injection cycle maximizes the number of samples
that can be processed.
Moreover, a total of 1536 samples can be accommodated in
right and left sample racks.
A direct access mechanism on sample racks allows the
user to place the sample on racks that are not
involved in sample injection even during analysis.
Furthermore, racks can be shared by multiple
analysts, without interrupting the analysis of samples
placed by others. Overall, this function enhances
work efficiency.
System status and chromatograms can be viewed
remotely from smart devices and home computers.
Situations can be checked without needing to visit
the laboratory.
Displays Chromatogram
in Real Time
Refined Usability
Control panel with a color LCD touch
panel allows anyone to operate the
instrument, regardless of experience
level. Easily and reliably perform
routine maintenance following
on-screen instructions.
The chromatogram real-time monitor
allows the user to immediately
confirm the success or failure of data,
even in a computer-less laboratory
environment.
Use of Multiple Detectors Expands
Application Range
Excellent Baseline Stability Unaffected
by Circumstances
Supports High-Speed Multi-Analyte Processing
Autosampler Enhances Data Reliability
Auto Shutdown Function
Reduces Power
Consumption
Maximum Reliability and Stability
— Fundamental functions assure analysis results —
Open Access Sample Placement
System Monitoring via Smart Devices
Window on a Smartphone
In addition to the UV-visible (UV/VIS) absorbance detector or
photodiode array (PDA) detector included as standard, a fluorescence
detector or differential refractive index detector can be added.
Large-Capacity Column
Oven Supports Up to 90°C
The Forced-air circulation method
enhances column temperature
stability. Maximum operating
temperature of 90°C allows
high-temperature analyses such as
sugar analysis. Moreover, three 300
mm long columns or six 100 mm long
columns can be accommodated.
Quaternary Solvent
Delivery Unit
A 10 μL micro plunger ensures
accurate quaternary gradient
delivery. Optional reservoir switching
valve further extends the solvent
selection to seven so that the solvent
for the flow path rinsing can be set.
The UV/VIS detector and the PDA detector employ dual-temperature
control (TC-Optics and flow cell) and provide measurements with a
stable baseline hardly affected by room temperature fluctuation.
Excellent reproducibility for injection volumes less than 1 μL,
wide linearity range and ultra-low carryover (<0.0025%) improve
the reliability of data, especially for analyses of precious
biological samples and direct analyses of concentrated samples.
Compact Footprint
The i-Series brings together all the functions required for LC analysis in an integrated form. With its space-saving design,
which is only 410 mm wide, three units can be installed on a laboratory bench compared to only two comparable
instruments from other companies. The instrument footprint does not change even if another detector is installed.
After analysis is complete, the auto
shutdown function minimizes power
consumption in standby mode and
can reduce power consumption by at
least 95% compared to normal
standby mode.
A 14-second injection cycle maximizes the number of samples
that can be processed.
Moreover, a total of 1536 samples can be accommodated in
right and left sample racks.
A direct access mechanism on sample racks allows the
user to place the sample on racks that are not
involved in sample injection even during analysis.
Furthermore, racks can be shared by multiple
analysts, without interrupting the analysis of samples
placed by others. Overall, this function enhances
work efficiency.
System status and chromatograms can be viewed
remotely from smart devices and home computers.
Situations can be checked without needing to visit
the laboratory.
Displays Chromatogram
in Real Time
Refined Usability
Control panel with a color LCD touch
panel allows anyone to operate the
instrument, regardless of experience
level. Easily and reliably perform
routine maintenance following
on-screen instructions.
The chromatogram real-time monitor
allows the user to immediately
confirm the success or failure of data,
even in a computer-less laboratory
environment.
4
5
Specifications
Flow rate accuracy
Flow rate precision
Configuration
Gradient / range of
set concentrations
Gradient /
concentration accuracy
Gradient /
concentration precision
Maximum pressure
System Delay
Volume
Cross-contamination
Injection cycle time
Samples for processing
Sample cooler
Containable column
size
Not included
0 to 100%, in 0.1% steps
±0.5% (0.1 to 2 mL/min, 1 to 20 MPa, Specified condition)
±0.1% (1 mL/min,10 MPa, Specified condition)
Min. 14 sec (Specified condition)
336 (1 mL), 216 (1.5 mL), 112 (4 mL), 4 (MTP/DWP)
Heating and cooling
method
Forced air circulation method
Temperature control
range
Flow rate switching
valve
Room temperature − 12 to 90°C, Setting range 4 to 90°C
Temperature control
precision
Temperature stability
±0.1°C
±0.8°C (Specified condition)
0.0025% (Caffeine, Specified condition)
650 µL
(Option: 460 µL, 1100 µL)
4 to 45°C (Room temperature needs to be 30°C or lower and the humidity 70% or less
to go down to 4°C. Room temperature needs to be 15°C or higher to go up to 45°C.)
6 pieces at 10 cm max., 3 pieces at 10 to 30 cm
2 pieces at
10 to 30 cm
Not allowed
460 µL
(Option: 650 µL, 1100 µL)
505 μL
(Flow path 1)
765 μL
(Flow path 2)
Max. 1 pc
≤ ±1% or ≤ ±2 μL/min, below whichever is greater
(0.01 to 2 mL/min, Specified condition)
≤ ±2%
(2 to 5 mL/min, Specified condition)
≤ ±1% or ≤ ±2 μL/min, below whichever is greater
(0.01 to 2 mL/min,1 to 40 MPa, Specified condition)
≤ ±2% or ≤ ±2 μL/min, below whichever is greater
(0.01 to 3 mL/min, 40 to 60 MPa, Specified condition)
0.1 to 100 µL
(Option: 0.1 to 50 µL, 1 to 500 µL, 1 to 2,000 µL)
0.1 to 50 µL
(Option: 0.1 to 100 µL, 1 to 500 µL, 1 to 2,000 µL)
50 MPa (0.0001 to 5 mL/min)
22 MPa (5.0001 to 10 mL/min)
Injection volume
reproducibility
RSD < 0.20% (5.0−2000 μL)
RSD < 0.25% (2.0−4.9 μL)
RSD < 0.5% (1.0−1.9 μL)
RSD < 1.0% (0.5−0.9 μL)
70 MPa (0.0001 to 3 mL/min)
44 MPa (3.0001 to 5 mL/min)
22 MPa (5.0001 to 10 mL/min)
S228-65824-58 S228-65825-58
S228-65821-58 S228-65822-58 S228-65823-58
S228-65820-58
S228-65826-58
Five Lines: Mobile phase 4 + Rinse solution 1 (Volume 400 μL)
Parallel-type double plunger
≤ 0.1 MPa (1.0 mL/min,10 MPa, Water)
0.0001 to 10 mL/min
< 0.06 %RSD or < 0.02 minSD, below whichever is greater
Four-solvent low-pressure gradient
LC-2050C 3D
(PDA model)
LC-2050C LT
detector-less
model
LC-2060C 3D
MT
(PDA model)
LC-2060C
(UV model)
LC-2060C 3D
(PDA model)
Model
Degassing unit
Pumping method
Pulsation
Flow rate setting
range
Total-volume sample injection
Injection method
±1% (50 μL, N = 10)
Injection volume
accuracy
Injection volume
setting range
> 0.9999
(1 to 100 μL, Specified condition)
> 0.9999
(1 to 50 μL, Standard Sample Loop,
Specified condition),
> 0.9999
(1 to 100 μL, 100 μL Sample Loop (Option),
Specified condition)
Injection linearity
P/N
Pu
m
p
A
u
to
sa
m
pl
er
C
o
lumn
O
ve
n
LC-2050
UV model
without sample
cooler
(
)
(
)
LC-2050C
(UV model)
LC-2050C 3D
(PDA model)
LC-2050C LT
detector-less
model
LC-2060C 3D
MT
(PDA model)
LC-2060C
(UV model)
LC-2060C 3D
(PDA model)
Model
LC-2050
UV model
without sample
cooler
(
)
(
)
LC-2050C
(UV model)
S228-65821-58
S228-65820-58
S228-65824-58
Option cell
Flow cell
U
V
Det
ec
to
r
190 to 700 nm
8 nm
≤ ±1 nm
High-Speed: 8 μL (10 mm, TC),
Semi-micro: 2.5 μL (5mm, TC)
Conventional: 12 μL (10 mm, TC),
Semi-micro: 2.5 μL (5 mm, TC)
12 μL (10 mm, TC), 12 MPa
8 μL (10 mm, TC), 12 MPa
LC-2050
UV model
without sample cooler
(
)
LC-2050C
(UV model)
LC-2060C
(UV model)
Model
Wavelength range
Spectral bandwidth
Wavelength accuracy
Up to 2.5 AU (5%)
Up to 100 Hz
Deuterium (D2) lamp
Linearity
Sampling rate
Light source
≤ ±2.5 × 10−6 AU, (250 nm, Specified condition)
≤ 100 × 10−6 AU/h (250 nm, Specified condition)
Noise level
Drift
P/N
Option cell
Flow cell
PD
A
Det
ec
to
r
190 to 800 nm
1.4 nm (Specified condition)
1.2 nm, 8 nm
0.6 nm/pixel
1024
≤ ±1 nm
≤ ±3 × 10−6 AU (250 nm, reference: 350 nm, Specified condition)
≤ 500 × 10−6 AU/h (250 nm, reference: 350 nm, Specified condition)
Up to 2 AU (5%)
Up to 100 Hz
Deuterium (D2) lamp (Standard), tungsten (W) lamp (option)
High-Speed: 8 μL (10 mm, TC),
Semi-micro: 2.5 μL (5 mm, TC)
Conventional: 10 μL (10 mm, TC),
Semi-micro: 2.5 μL (5 mm, TC)
10 μL (10mm, TC), 12 MPa
8 μL (10 mm, TC), 12 MPa
S228-65822-58
LC-2050C 3D
(PDA model)
S228-65826-58
LC-2060C 3D MT
(PDA model)
S228-65825-58
LC-2060C 3D
(PDA model)
Model
Wavelength range
Spectral resolution
Slit width
Device resolution
P/N
Wavelength accuracy
Noise level
Drift
Linearity
Sampling rate
Light source
Number of
photodiode array
elements
≤ ±0.1 nm
Wavelength
reproducibility
Enable (Any 2 wavelengths of 190 to 370 nm or 371 to 700 nm)
Simultaneous
monitoring of
2 wavelengths
S228-65824-58 S228-65825-58
S228-65821-58 S228-65822-58 S228-65823-58
S228-65820-58
S228-65826-58
W410×H605×D500 mm (Not including reservoir tray height)
Dimensions
Weight
Available pH range
P/N
Materials for parts
in contact with
liquids
Workstation
Stainless steel (SUS316L, SUS316), FEP, PEEK, PTFE,
perfluoroelastomer, ruby, sapphire,
Hastelloy C, UHMWPE, ceramic, PFA, quartz, PPS
Stainless steel (SUS316L, SUS316), FEP, PEEK, PTFE,
perfluoroelastomer, ruby, sapphire,
Hastelloy® C, GFP, ceramic, PFA, quartz, PPS
1 to 13
LabSolutions™ LC/GC Ver.5.103 or later, LabSolutions DB/CS Ver.6.103 or later (Incompatible with LCsolution™)
58 kg
63 kg
64 kg
63 kg
53 kg
Mi
sc
el
lan
eo
u
s
4
5
Specifications
Flow rate accuracy
Flow rate precision
Configuration
Gradient / range of
set concentrations
Gradient /
concentration accuracy
Gradient /
concentration precision
Maximum pressure
System Delay
Volume
Cross-contamination
Injection cycle time
Samples for processing
Sample cooler
Containable column
size
Not included
0 to 100%, in 0.1% steps
±0.5% (0.1 to 2 mL/min, 1 to 20 MPa, Specified condition)
±0.1% (1 mL/min,10 MPa, Specified condition)
Min. 14 sec (Specified condition)
336 (1 mL), 216 (1.5 mL), 112 (4 mL), 4 (MTP/DWP)
Heating and cooling
method
Forced air circulation method
Temperature control
range
Flow rate switching
valve
Room temperature − 12 to 90°C, Setting range 4 to 90°C
Temperature control
precision
Temperature stability
±0.1°C
±0.8°C (Specified condition)
0.0025% (Caffeine, Specified condition)
650 µL
(Option: 460 µL, 1100 µL)
4 to 45°C (Room temperature needs to be 30°C or lower and the humidity 70% or less
to go down to 4°C. Room temperature needs to be 15°C or higher to go up to 45°C.)
6 pieces at 10 cm max., 3 pieces at 10 to 30 cm
2 pieces at
10 to 30 cm
Not allowed
460 µL
(Option: 650 µL, 1100 µL)
505 μL
(Flow path 1)
765 μL
(Flow path 2)
Max. 1 pc
≤ ±1% or ≤ ±2 μL/min, below whichever is greater
(0.01 to 2 mL/min, Specified condition)
≤ ±2%
(2 to 5 mL/min, Specified condition)
≤ ±1% or ≤ ±2 μL/min, below whichever is greater
(0.01 to 2 mL/min,1 to 40 MPa, Specified condition)
≤ ±2% or ≤ ±2 μL/min, below whichever is greater
(0.01 to 3 mL/min, 40 to 60 MPa, Specified condition)
0.1 to 100 µL
(Option: 0.1 to 50 µL, 1 to 500 µL, 1 to 2,000 µL)
0.1 to 50 µL
(Option: 0.1 to 100 µL, 1 to 500 µL, 1 to 2,000 µL)
50 MPa (0.0001 to 5 mL/min)
22 MPa (5.0001 to 10 mL/min)
Injection volume
reproducibility
RSD < 0.20% (5.0−2000 μL)
RSD < 0.25% (2.0−4.9 μL)
RSD < 0.5% (1.0−1.9 μL)
RSD < 1.0% (0.5−0.9 μL)
70 MPa (0.0001 to 3 mL/min)
44 MPa (3.0001 to 5 mL/min)
22 MPa (5.0001 to 10 mL/min)
S228-65824-58 S228-65825-58
S228-65821-58 S228-65822-58 S228-65823-58
S228-65820-58
S228-65826-58
Five Lines: Mobile phase 4 + Rinse solution 1 (Volume 400 μL)
Parallel-type double plunger
≤ 0.1 MPa (1.0 mL/min,10 MPa, Water)
0.0001 to 10 mL/min
< 0.06 %RSD or < 0.02 minSD, below whichever is greater
Four-solvent low-pressure gradient
LC-2050C 3D
(PDA model)
LC-2050C LT
detector-less
model
LC-2060C 3D
MT
(PDA model)
LC-2060C
(UV model)
LC-2060C 3D
(PDA model)
Model
Degassing unit
Pumping method
Pulsation
Flow rate setting
range
Total-volume sample injection
Injection method
±1% (50 μL, N = 10)
Injection volume
accuracy
Injection volume
setting range
> 0.9999
(1 to 100 μL, Specified condition)
> 0.9999
(1 to 50 μL, Standard Sample Loop,
Specified condition),
> 0.9999
(1 to 100 μL, 100 μL Sample Loop (Option),
Specified condition)
Injection linearity
P/N
Pu
m
p
A
u
to
sa
m
pl
er
C
o
lumn
O
ve
n
LC-2050
UV model
without sample
cooler
(
)
(
)
LC-2050C
(UV model)
LC-2050C 3D
(PDA model)
LC-2050C LT
detector-less
model
LC-2060C 3D
MT
(PDA model)
LC-2060C
(UV model)
LC-2060C 3D
(PDA model)
Model
LC-2050
UV model
without sample
cooler
(
)
(
)
LC-2050C
(UV model)
S228-65821-58
S228-65820-58
S228-65824-58
Option cell
Flow cell
U
V
Det
ec
to
r
190 to 700 nm
8 nm
≤ ±1 nm
High-Speed: 8 μL (10 mm, TC),
Semi-micro: 2.5 μL (5mm, TC)
Conventional: 12 μL (10 mm, TC),
Semi-micro: 2.5 μL (5 mm, TC)
12 μL (10 mm, TC), 12 MPa
8 μL (10 mm, TC), 12 MPa
LC-2050
UV model
without sample cooler
(
)
LC-2050C
(UV model)
LC-2060C
(UV model)
Model
Wavelength range
Spectral bandwidth
Wavelength accuracy
Up to 2.5 AU (5%)
Up to 100 Hz
Deuterium (D2) lamp
Linearity
Sampling rate
Light source
≤ ±2.5 × 10−6 AU, (250 nm, Specified condition)
≤ 100 × 10−6 AU/h (250 nm, Specified condition)
Noise level
Drift
P/N
Option cell
Flow cell
PD
A
Det
ec
to
r
190 to 800 nm
1.4 nm (Specified condition)
1.2 nm, 8 nm
0.6 nm/pixel
1024
≤ ±1 nm
≤ ±3 × 10−6 AU (250 nm, reference: 350 nm, Specified condition)
≤ 500 × 10−6 AU/h (250 nm, reference: 350 nm, Specified condition)
Up to 2 AU (5%)
Up to 100 Hz
Deuterium (D2) lamp (Standard), tungsten (W) lamp (option)
High-Speed: 8 μL (10 mm, TC),
Semi-micro: 2.5 μL (5 mm, TC)
Conventional: 10 μL (10 mm, TC),
Semi-micro: 2.5 μL (5 mm, TC)
10 μL (10mm, TC), 12 MPa
8 μL (10 mm, TC), 12 MPa
S228-65822-58
LC-2050C 3D
(PDA model)
S228-65826-58
LC-2060C 3D MT
(PDA model)
S228-65825-58
LC-2060C 3D
(PDA model)
Model
Wavelength range
Spectral resolution
Slit width
Device resolution
P/N
Wavelength accuracy
Noise level
Drift
Linearity
Sampling rate
Light source
Number of
photodiode array
elements
≤ ±0.1 nm
Wavelength
reproducibility
Enable (Any 2 wavelengths of 190 to 370 nm or 371 to 700 nm)
Simultaneous
monitoring of
2 wavelengths
S228-65824-58 S228-65825-58
S228-65821-58 S228-65822-58 S228-65823-58
S228-65820-58
S228-65826-58
W410×H605×D500 mm (Not including reservoir tray height)
Dimensions
Weight
Available pH range
P/N
Materials for parts
in contact with
liquids
Workstation
Stainless steel (SUS316L, SUS316), FEP, PEEK, PTFE,
perfluoroelastomer, ruby, sapphire,
Hastelloy C, UHMWPE, ceramic, PFA, quartz, PPS
Stainless steel (SUS316L, SUS316), FEP, PEEK, PTFE,
perfluoroelastomer, ruby, sapphire,
Hastelloy® C, GFP, ceramic, PFA, quartz, PPS
1 to 13
LabSolutions™ LC/GC Ver.5.103 or later, LabSolutions DB/CS Ver.6.103 or later (Incompatible with LCsolution™)
58 kg
63 kg
64 kg
63 kg
53 kg
Mi
sc
el
lan
eo
u
s
6
7
Description
Part Name
P/N
Description
Part Name
P/N
Description
Part Name
P/N
Description
Part Name
P/N
Column Ovens
Description
Part Name
P/N
S228-65611-58
S228-65610-58
S228-56249-41
This is the mobile phase selection valve (3 flow lines).
An FCV-11AL connection kit is required to connect to an FCV-11AL unit.
This is the mobile phase selection valve (1 flow line).
An FCV-11AL connection kit is required to connect to an FCV-11AL unit.
This kit includes connector cables and other items necessary for connecting FCV-11AL
and FCV-11ALS units.
This kit decreases the system volume to 650 μL.
This kit decreases the system volume to 460 μL.
Compatible Volume System Kit
Low Volume System Kit
This sample loop is used for injecting 50 μL volumes. (Standard configuration parts of LC-2060)
This sample loop is used for injecting 100 μL volumes. (Standard configuration parts of LC-2050)
This increases the injection volume to 500 μL.
This increases the injection volume to 2 mL.
Fitting for inlet to high-pressure capacity column
Fitting for inlet to high-pressure capacity column
Additional sample rack
Plate used to place 84 1 mL sample vials
Plate used to place 54 1.5 mL sample vials
FCV-11AL
FCV-11ALS
FCV-11AL Connection Kit
S228-57313-41
This parts set includes a mixer and tubing for using TFA or other UV-absorbing substance
as a mobile phase.
780 μL Mixer Kit
S228-57313-42
S228-57796-42
S228-57796-43
This parts set includes a mixer and tubing for using TFA or other UV-absorbing substance
as a mobile phase.
2 mL Mixer Kit
Solvent Delivery Units
Main Optional Accessories
S228-56074-44
S228-56074-42
S228-45405-41
S228-45405-42
S228-56867-41
S228-56867-43
S228-55735-41
S228-56197-41
S228-50830-92
Plate used to place 28 4 mL sample vials
S228-56197-42
50 μL Sample Loop
100 μL Sample Loop
Optional 500 μL Sample Loop
Optional 2 mL Sample Loop
UHPLC Fitting (set of 1)
UHPLC Fitting (set of 10)
Sample Rack
Plate for 1 mL Sample Vials (set of 2)
Autosamplers
Column Clamp ASSY B5
Column Clamp ASSY B8
FCV Mounting Kit
CMD
CMD Cable
FCV-14AH
FCV-34AH
UV Detectors
PDA Detectors
S228-56808-41
S228-56167-41
S228-45621-41
S228-45605-46
This low-pressure flow-line selection valve is used to recycle mobile phase.
This cell is compatible with conventional analysis. (Standard configuration parts of LC-2050)
This cell is compatible with UHPLC analysis. (Standard configuration parts of LC-2060)
This cell is compatible with semi-micro analysis.
Recycle Valve
Flow Cell for UV Detectors
UHPLC Cell for UV Detectors
Semi-Micro Cell for UV Detectors
S228-57110-41
This assembly includes a tungsten lamp and its socket used for high-sensitivity analysis in the
long-wavelength region.
S228-42593-43
S228-45618-54
S228-45605-47
This cell is compatible with conventional analysis. (Standard configuration parts of LC-2050)
This cell is compatible with fast analysis. (Standard configuration parts of LC-2060)
This cell is compatible with semi-micro analysis.
Flow Cell for PDA Detectors
High-Speed Cell for PDA Detectors
Semi-Micro Cell for PDA Detectors
W Lamp ASSY for PDA Detectors
S228-15617-91
S228-15617-92
S228-65614-58
S228-45185-41
S228-55765-42
S228-37281-41
S228-39991
This set of clamps is for adding a column with an outside diameter between 6.4 and 9.5 mm.
This set of clamps is for adding a column with an outside diameter between 9.5 and 12.7 mm.
Automatic column switching valve with 6 positions and 7 ports which is usable at a pressure
of 34.3 MPa max.
Automatic column switching valve with 6 positions and 7 ports which is usable at a pressure
of 100 MPa max.
This parts kit is used to secure an FCV-14AH/ 34AH unit inside the column oven.
This column management device is used to record information about columns.
This cable is used to connect between the CMD and main units.
Plate for 1.5 mL Sample Vials
(set of 2)
Plate used to place 54 1.5 mL sample vials
S228-61615-42
Metal plate for 1.5ml Sample
Vials (set of 1)
Plate for 4 mL Sample Vials (set of 2)
Xenon lamp
0, 200 to 650 nm
Water Raman peak S/N 1200 min.
Low background S/N > 9000
W260 × D420 × H210 mm, 16 kg
Xenon lamp, low-pressure mercury lamp
(To check wavelength accuracy)
0, 200 to 750 nm
Water Raman peak S/N 2000 min.
Low background S/N > 12000
W260 × D420 × H210 mm, 18 kg
20 nm
±2 nm
±0.2 nm
12 μL, 2 MPa (approx. 20 kgf/cm2), SUS316L, PTFE (fluororesin), quartz
Four-wavelength detection, wavelength scanning
Liquid-leakage sensor
4 to 35°C
Light source
Wavelength range
Spectral bandwidth
Wavelength accuracy
Wavelength precision
S/N
Dimensions and weight
Cell capacity
Functions
Safety measures
RF-20A/RF-20AXS
ELSD-LT III
Optional Detector Specifications
RID-20A (S228-65306-58)
RF-20A (S228-65304-58)
ELSD-LT III (S228-65900-58)
RF-20AXS (S228-65305-58)
1 to 1.75 RIU
A mode: 0.01 to 500 μRIU
P and L modes: 1 to 5000 μRIU
No filtering, 0.05 to 10 sec, 11 steps
With a switch
Auto zero, auto optical zero, baseline shift functions
Reflective index
measurement range
20 mL/min (150 mL/min with an option)
Maximum operating
flow rate
30 to 60°C (0.01°C steps)
Temperature control
of cell unit
SUS316L, quartz, PTFE, Al2O3, ETFE
Material in contact
with liquid
0.4 MPa (4 kgf/cm2)
Maximum operating
pressure
4 to 35°C
Operating
temperature range
Range
Response
Polarity switching
Zero adjustment
RID-20A
Note: Hexafluoroisopropanol (HFIP) cannot be used as the mobile phase.
Siphon splitting
Semiconductor laser
Photodiode
W 250 × D 530 × H 330 mm, 15.5 kg
Nebulizing Method
Light Source
Detector
Air or nitrogen*
Nebulizer Gas
Dimensions and weight
* Supply gas at a pressure of about 350 kPa. An air compressor may also be used.
A filter (P/N: S228-45528-92) is also available for filtering out moisture and other matter from the compressor.
Mobile Phase Flow Rate
(Standard Nebulizer)
0.2 to 2 mL/min
—
4 to 40°C, 1°C steps
—
(Room temperature − 10°C) to 40°C
Cell temperature
control range
Cell temperature
setting range
Operating
temperature range
Room temperature to 100 °C
Temperature Setting
Range
4 to 35 °C
Operating
Temperature Range
20 to 85 %
Operating Humidity
Range
≤ 2.5 nRIU
≤ 0.1 μRIU/h
Noise level
Drift
9 μL
Cell capacity
W260 × D420 × H140 mm, 12 kg
Dimensions and weight
6
7
Description
Part Name
P/N
Description
Part Name
P/N
Description
Part Name
P/N
Description
Part Name
P/N
Column Ovens
Description
Part Name
P/N
S228-65611-58
S228-65610-58
S228-56249-41
This is the mobile phase selection valve (3 flow lines).
An FCV-11AL connection kit is required to connect to an FCV-11AL unit.
This is the mobile phase selection valve (1 flow line).
An FCV-11AL connection kit is required to connect to an FCV-11AL unit.
This kit includes connector cables and other items necessary for connecting FCV-11AL
and FCV-11ALS units.
This kit decreases the system volume to 650 μL.
This kit decreases the system volume to 460 μL.
Compatible Volume System Kit
Low Volume System Kit
This sample loop is used for injecting 50 μL volumes. (Standard configuration parts of LC-2060)
This sample loop is used for injecting 100 μL volumes. (Standard configuration parts of LC-2050)
This increases the injection volume to 500 μL.
This increases the injection volume to 2 mL.
Fitting for inlet to high-pressure capacity column
Fitting for inlet to high-pressure capacity column
Additional sample rack
Plate used to place 84 1 mL sample vials
Plate used to place 54 1.5 mL sample vials
FCV-11AL
FCV-11ALS
FCV-11AL Connection Kit
S228-57313-41
This parts set includes a mixer and tubing for using TFA or other UV-absorbing substance
as a mobile phase.
780 μL Mixer Kit
S228-57313-42
S228-57796-42
S228-57796-43
This parts set includes a mixer and tubing for using TFA or other UV-absorbing substance
as a mobile phase.
2 mL Mixer Kit
Solvent Delivery Units
Main Optional Accessories
S228-56074-44
S228-56074-42
S228-45405-41
S228-45405-42
S228-56867-41
S228-56867-43
S228-55735-41
S228-56197-41
S228-50830-92
Plate used to place 28 4 mL sample vials
S228-56197-42
50 μL Sample Loop
100 μL Sample Loop
Optional 500 μL Sample Loop
Optional 2 mL Sample Loop
UHPLC Fitting (set of 1)
UHPLC Fitting (set of 10)
Sample Rack
Plate for 1 mL Sample Vials (set of 2)
Autosamplers
Column Clamp ASSY B5
Column Clamp ASSY B8
FCV Mounting Kit
CMD
CMD Cable
FCV-14AH
FCV-34AH
UV Detectors
PDA Detectors
S228-56808-41
S228-56167-41
S228-45621-41
S228-45605-46
This low-pressure flow-line selection valve is used to recycle mobile phase.
This cell is compatible with conventional analysis. (Standard configuration parts of LC-2050)
This cell is compatible with UHPLC analysis. (Standard configuration parts of LC-2060)
This cell is compatible with semi-micro analysis.
Recycle Valve
Flow Cell for UV Detectors
UHPLC Cell for UV Detectors
Semi-Micro Cell for UV Detectors
S228-57110-41
This assembly includes a tungsten lamp and its socket used for high-sensitivity analysis in the
long-wavelength region.
S228-42593-43
S228-45618-54
S228-45605-47
This cell is compatible with conventional analysis. (Standard configuration parts of LC-2050)
This cell is compatible with fast analysis. (Standard configuration parts of LC-2060)
This cell is compatible with semi-micro analysis.
Flow Cell for PDA Detectors
High-Speed Cell for PDA Detectors
Semi-Micro Cell for PDA Detectors
W Lamp ASSY for PDA Detectors
S228-15617-91
S228-15617-92
S228-65614-58
S228-45185-41
S228-55765-42
S228-37281-41
S228-39991
This set of clamps is for adding a column with an outside diameter between 6.4 and 9.5 mm.
This set of clamps is for adding a column with an outside diameter between 9.5 and 12.7 mm.
Automatic column switching valve with 6 positions and 7 ports which is usable at a pressure
of 34.3 MPa max.
Automatic column switching valve with 6 positions and 7 ports which is usable at a pressure
of 100 MPa max.
This parts kit is used to secure an FCV-14AH/ 34AH unit inside the column oven.
This column management device is used to record information about columns.
This cable is used to connect between the CMD and main units.
Plate for 1.5 mL Sample Vials
(set of 2)
Plate used to place 54 1.5 mL sample vials
S228-61615-42
Metal plate for 1.5ml Sample
Vials (set of 1)
Plate for 4 mL Sample Vials (set of 2)
Xenon lamp
0, 200 to 650 nm
Water Raman peak S/N 1200 min.
Low background S/N > 9000
W260 × D420 × H210 mm, 16 kg
Xenon lamp, low-pressure mercury lamp
(To check wavelength accuracy)
0, 200 to 750 nm
Water Raman peak S/N 2000 min.
Low background S/N > 12000
W260 × D420 × H210 mm, 18 kg
20 nm
±2 nm
±0.2 nm
12 μL, 2 MPa (approx. 20 kgf/cm2), SUS316L, PTFE (fluororesin), quartz
Four-wavelength detection, wavelength scanning
Liquid-leakage sensor
4 to 35°C
Light source
Wavelength range
Spectral bandwidth
Wavelength accuracy
Wavelength precision
S/N
Dimensions and weight
Cell capacity
Functions
Safety measures
RF-20A/RF-20AXS
ELSD-LT III
Optional Detector Specifications
RID-20A (S228-65306-58)
RF-20A (S228-65304-58)
ELSD-LT III (S228-65900-58)
RF-20AXS (S228-65305-58)
1 to 1.75 RIU
A mode: 0.01 to 500 μRIU
P and L modes: 1 to 5000 μRIU
No filtering, 0.05 to 10 sec, 11 steps
With a switch
Auto zero, auto optical zero, baseline shift functions
Reflective index
measurement range
20 mL/min (150 mL/min with an option)
Maximum operating
flow rate
30 to 60°C (0.01°C steps)
Temperature control
of cell unit
SUS316L, quartz, PTFE, Al2O3, ETFE
Material in contact
with liquid
0.4 MPa (4 kgf/cm2)
Maximum operating
pressure
4 to 35°C
Operating
temperature range
Range
Response
Polarity switching
Zero adjustment
RID-20A
Note: Hexafluoroisopropanol (HFIP) cannot be used as the mobile phase.
Siphon splitting
Semiconductor laser
Photodiode
W 250 × D 530 × H 330 mm, 15.5 kg
Nebulizing Method
Light Source
Detector
Air or nitrogen*
Nebulizer Gas
Dimensions and weight
* Supply gas at a pressure of about 350 kPa. An air compressor may also be used.
A filter (P/N: S228-45528-92) is also available for filtering out moisture and other matter from the compressor.
Mobile Phase Flow Rate
(Standard Nebulizer)
0.2 to 2 mL/min
—
4 to 40°C, 1°C steps
—
(Room temperature − 10°C) to 40°C
Cell temperature
control range
Cell temperature
setting range
Operating
temperature range
Room temperature to 100 °C
Temperature Setting
Range
4 to 35 °C
Operating
Temperature Range
20 to 85 %
Operating Humidity
Range
≤ 2.5 nRIU
≤ 0.1 μRIU/h
Noise level
Drift
9 μL
Cell capacity
W260 × D420 × H140 mm, 12 kg
Dimensions and weight
C196-E099
High Performance Liquid Chromatograph
i-Series
Specifications
i-Series Specifications
Other Options
P/N
Description
Part Name
S228-56298-41
S228-55518-41
S228-55517-41
S228-55519-41
This kit is used to reinforce how the reservoir tray is attached.
This board is used to install additional connectors for optical link cables.
It is used to install fluorescence detector RF-20A series and other detectors.
This camera is installed inside autosamplers.
It allows you to monitor the needle action via the computer screen.
This is an analog-digital converter board. It is used to input the detector signal
as an analog signal, such as when a non-Shimadzu detector is connected.
Earthquake Reinforcement Kit
Optional Optical Board
Camera ASSY for Autosampler
Optional AD Board
S228-26004-44
S228-26004-43
This kit includes FCV-14AH for up to six columns switching and other parts.
This kit includes FCV-14AH for up to six columns switching, FCV-11AL for solvent delivery of seven
mobile phases and other parts.
Smart Automation Kit
(4-mobile phase)
S228-38583-42
This is a set of five one-liter reservoir bottles for holding mobile phases.
1 L Mobile Phase Bottles
(set of 5)
S228-56245-41
This kit contains a top plate and reservoir tray for installing an additional detector.
Optional Detector Attachment
Kit
Smart Automation Kit
(7-mobile phase)
Touch Panel Protecting Sheet
Upgrade Kit UV
Upgrade Kit PDA
Protecting sheet for touch panel.
Kit for upgrade from LC-2050 (UV model with sample cooler) to LC-2060.
Kit for upgrade from LC-2050 (PDA model) to LC-2060.
S228-59212-41
S228-58993-41
S228-58993-42
• Automated support functions utilizing digital technologies, such as M2M, IoT, and
Artificial Intelligence (AI), that enable higher productivity and maximum reliability.
• Allows a system to monitor and diagnose itself, handle any issues during data acquisition
without user input, and automatically behave as if it were operated by an expert.
• Supports the acquisition of high quality, reproducible data regardless of an operator's skill
level for both routine and demanding applications.
Analytical Intelligence logo, LabSolutions and LCsolution are trademarks of Shimadzu Corporation.
Hastelloy is a registered trademark of Haynes International, Inc.
For Research Use Only. Not for use in diagnostic procedures.
This publication may contain references to products that are not available in your country. Please contact us to check the availability of
these products in your country.
Company names, products/service names and logos used in this publication are trademarks and trade names of Shimadzu Corporation,
its subsidiaries or its affiliates, whether or not they are used with trademark symbol “TM” or “®”.
Third-party trademarks and trade names may be used in this publication to refer to either the entities or their products/services, whether
or not they are used with trademark symbol “TM” or “®”.
Shimadzu disclaims any proprietary interest in trademarks and trade names other than its own.
Shimadzu does not assume any responsibility or liability for any damage, whether direct or indirect, relating to the use of this publication.
www.shimadzu.com/an/
© Shimadzu Corporation, 2020
First Edition: November 2020 3655-10021-PDFNS
