Low Level Formaldehyde Detection with the Polyarc System

Repeatable Cannabidiol Isolate Method Application Note Quick, Accurate Analysis via Polyarc and GC/FID Author Jonathan McIntyre Activated Research Company Eden Prairie, MN Abstract The Polyarc microreactor for an existing gas chromatograph with a Flame Ionization Detector (GC/FID system) allows for…

Sub 1 mg/kg (1 ppm) Detection of Carbon Disulfide with the Polyarc System Application Note Low-Level Detection Author Charlie Spanjers Activated Research Company 7561 Corporate Way Eden Prairie, MN 55344 [email protected] Abstract The analysis of low levels of carbon disulfide…

Saving Time by Reducing Calibrations for the Quantification of VOCs in Paints and Coatings using the Polyarc® System Application Note Paints and Coatings Authors Nemi Jain and Evelyn Rouge Sherwin-Williams Co. 4440 Warrensville Center Rd. Warrensville Hts., OH 44128 [email protected]…

Modified FID for Determination of Formaldehyde in Consumer Products Application Note Sensitivity Comparison for GC/FID Introduction Author Erick Walts Lee N. Polite Axion Labs & Training Institute 14 N Peoria St Chicago, IL 60607 [email protected] Abstract Formaldehyde is a common,…