Determination of Ochratoxin A in Coffee via FREESTYLE ThermELUTE™ with Online HPLC-Measurement

Applications | 2019 | LCTechInstrumentation
Sample Preparation, HPLC
Industries
Food & Agriculture
Manufacturer
Thermo Fisher Scientific, LCTech

Importance of the Topic


Ochratoxin A is a highly toxic fungal metabolite commonly found in coffee and other stored products. Regulatory limits set by the European Commission require sensitive and reliable methods to ensure food safety and compliance.

Objectives and Study Overview


This study describes an automated workflow combining FREESTYLE ThermELUTE™ immunoaffinity cleanup with online HPLC-fluorescence detection to quantify Ochratoxin A in coffee within 30 minutes per sample. The method aims to maximize throughput, precision, and sensitivity.

Methodology and Instrumentation


Samples were extracted, diluted, and filtered following OtaCLEAN SMART protocols. An aliquot in a 16 mL vial is processed by the FREESTYLE ThermELUTE system, which performs cleanup on OtaCLEAN SMART immunoaffinity columns and injects the eluate into the HPLC system automatically. Key instrumentation includes:
  • FREESTYLE Basic and SPE modules
  • FREESTYLE ThermELUTE™
  • OtaCLEAN SMART immunoaffinity columns
  • UltiMate™ 3000 RS fluorescence detector

HPLC conditions: RP C18 column; mobile phase acetonitrile/water/methanol (5/40/55, v/v/v) with 1% acetic acid; flow rate 0.6 mL/min; excitation at 335 nm and emission at 465 nm.

Main Results and Discussion


Recovery rates for spiked samples were consistently high: approximately 98% for chili, coffee, and paprika, 97% for beer, and 104% for rice at a 5 ppb spike level. Calibration was linear from 0 to 12.5 ppb (R² = 0.9992), with a limit of detection of 0.05 ppb (S/N = 5). Chromatograms demonstrated clear OTA peaks in both standard mixtures and a real contaminated coffee sample. A comparison with an external laboratory showed excellent agreement between methods.

Benefits and Practical Applications


The integrated system delivers rapid, unattended analysis, processing over 70 samples per day. It achieves precise quantification in the low ppt range, making it well suited for routine quality control and compliance testing in food laboratories.

Future Trends and Potential Uses


Upcoming developments may include coupling with mass spectrometry for multi-mycotoxin analysis, integrating IoT for remote monitoring, further miniaturization of sample preparation, and adaptation to additional contaminant classes.

Conclusion


The FREESTYLE ThermELUTE with online HPLC-FLD offers a robust, high-throughput approach to OTA determination in coffee, ensuring regulatory compliance and efficient laboratory operation.

References


  • Commission Regulation (EU) No 105/2010 amending Regulation (EC) No 1881/2006 on maximum levels of Ochratoxin A in foodstuffs.
  • P. Good, H. Kandler, P. Koch, and T. Schärer, Mitt. Lebensm. Hyg. 93 (2002) 186–193.
  • P. M. Scott and S. R. Kanhere, Food Addit. Contam. 12(4) (1995) 591–598.
  • M. Visconti, M. Pascale, and G. Centonze, J. Chromatogr. A 864 (1999) 89–101.
  • R. Zimmerli and R. Dick, J. Chromatogr. B 666 (1995) 85–99.
  • W. Thellmann and W. Weber, DLR 1 93 (1997) 1–3.
  • S. Kastrup and U. Aulwurm, GIT 9 (2002) 975–977.

Content was automatically generated from an orignal PDF document using AI and may contain inaccuracies.

Downloadable PDF for viewing
 

Similar PDF

Mycotoxins Sample Preparation and Analysis
Mycotoxins Sample Preparation and Analysis
2019|LCTech|Brochures and specifications
Determination of Aflatoxin M1 via FREESTYLE ThermELUTE™ with Online HPLC-Measurement
Mycotoxin Workshop 2018: Fully Automated Mycotoxin Analysis From Extract to Chromatogram
FREESTYLE ThermELUTE™
FREESTYLE ThermELUTE™
2019|LCTech|Brochures and specifications