The Agilent G1367C High Performance Autosampler SL is designed for applications requiring precise injection, high operating pressure, and low sample-to-sample carryover. During analysis, the mobile phase continuously flushes the internal sample path, while an integrated wash station cleans the outside of the needle, helping reduce residual sample contamination in sensitive HPLC and LC/MS workflows.
Technical Specifications:
- Injection Volume Range: 0.1 – 100 µL in 0.1 µL increments; up to 1500 µL with multiple draw (hardware modification required).
- Injection Precision:
- < 0.25% RSD for 5 – 100 µL.
- < 1% RSD for 1 – 5 µL.
- Pressure Range: 0 – 600 bar (0 – 8700 psi).
- Sample Viscosity Range: 0.2 – 5 cP.
- Sample Capacity:
- 2 microplates + 10 × 2 mL vials
- up to 108 × 2 mL vials in two 54-position trays plus 10 additional vials
- 30 × 6 mL vials in two 15-position trays
- Eppendorf tubes with appropriate trays
- 96- and 384-well microplates
- Injection Cycle Time: Typically < 17 seconds using standard conditions (default draw speed: 100 µL/min; default eject speed: 100 µL/min; injection volume: 1 µL).
- Carryover: Typically < 0.01% under specified conditions.
- Communications:
- CAN
- RS-232C
- APG Remote
- Safety Features: Leak detection and safe leak handling, low voltages in maintenance areas, error detection and display.
- GLP Features: Early maintenance feedback (EMF), electronic records of maintenance and errors.
Physical Specifications
- Dimensions (H × W × D): approximately 200 × 345 × 440 mm
- Weight: approximately 15.5 kg
- Power Supply: 100–240 VAC
- Frequency: 50/60 Hz
- Maximum Power Consumption: 200 W
- Ambient Operating Temperature: 4–55 °C
