News from LabRulezLCMS Library - Week 52, 2025

News from LabRulezLCMS Library - Week 02, 2026

News from LabRulezLCMS Library - Week 05, 2026

News from LabRulezLCMS Library - Week 08, 2026

News from LabRulezLCMS Library - Week 14, 2026

News from LabRulezLCMS Library - Week 22, 2026

<p><strong>Our Library never stops expanding. What are the most recent contributions to LabRulezLCMS Library in the week of 15th June 2026? Check out new documents from the field of liquid phase, especially HPLC and LC/MS techniques!</strong></p><blockquote><p><span style="font-size:20px;">👉 </span><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library"><span style="font-size:20px;"><strong>SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT LCMS AND RELATED TECHNIQUES</strong></span></a></p></blockquote><blockquote><p><strong>👉 Need info about different analytical techniques?</strong> Peek into <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library"><strong>LabRulezGCMS</strong></a> or <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library"><strong>LabRulezICPMS</strong></a> libraries.</p></blockquote><p>This week we bring you application notes by <strong>Agilent Technologies, Shimadzu </strong>and<strong> Thermo Fisher Scientific, </strong>technical note by<strong> KNAUER </strong>and brochure by <strong>Waters Corporation!</strong></p><h3><strong>1. Agilent Technologies: Large-Volume Dilute-and-Shoot Analysis of PFAS in Drinking Water Using the Altura PFAS Column</strong></h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_analysis_pfas_drinking_water_altura_5994_9186en_agilent_a66334e5b0.pdf"><strong>Full PDF for download</strong></a></li></ul><p>Per‑ and polyfluoroalkyl substances (PFAS) are synthetic fluorinated compounds valued for their oil‑ and water‑repellent properties, but their environmental persistence and mobility have driven the development of increasingly stringent regulations for drinking water monitoring. Existing dilute-and-shoot methods, such as EPA 8327 and ASTM D7979, were originally designed for screening PFAS in nonpotable water. These methods typically rely on 10 to 30&nbsp;µL injection volumes, setting practical quantitation limits appropriately 10 ng/L.<sup>1,2&nbsp;</sup></p><p>We present a large‑volume injection workflow that extends the capabilities of these methods toward trace PFAS quantitation in drinking water. Using the Agilent 6495D triple quadrupole LC/MS (LC/TQ) coupled with a 1290 Infinity II LC, we achieved injections of 200 µL of methanol‑diluted water on the Altura PFAS column without requiring SPE concentration. The Altura PFAS column maintained peak symmetry and retention stability under these injection conditions. This configuration enabled a working calibration range of 0.25 to 25 ng/L, extending the low-end sensitivity substantially relative to published dilute-and shoot methods.<sup>1,2&nbsp;</sup></p><p>This performance enhancement simplifies operations by removing labor‑intensive extraction steps, while maintaining sensitivity required for regulatory guidelines thereby supporting high‑throughput PFAS workflows suitable for routine drinking water analysis. The PFAS compounds analyzed were PFBS, HFPO-DA, PFHpA, PFHxA, PFHxS, PFOA, PFOS, PFNA, and PFDA. These compounds were selected due to their relevance to ongoing regulatory actions and proposed maximum contaminant level (MCL) considerations for drinking water.&nbsp;</p><p>Specific highlights of this experiment include:&nbsp;</p><ul><li>Minimized peak tailing and solvent effects with 200 µL injections water/methanol (1:1) injections.</li><li>Increased throughput by elimination of solid phase extraction (SPE).&nbsp;</li><li>Enhanced sensitivity of 6495D LC/TQ at low end (0.25&nbsp;ng/L) for the dilute-and-shoot method in drinking&nbsp;water.</li></ul><h4><strong>Experimental&nbsp;</strong></h4><h5><strong>Instrumentation&nbsp;</strong></h5><p><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=10&amp;search=+1290+Infinity+II"><strong>Agilent 1290 Infinity II LC</strong></a> coupled to <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=10&amp;search=6495D"><strong>Agilent 6495D LC/TQ system</strong></a> was utilized for the LC/MS/MS analysis. An Infinity&nbsp;II multisampler with an extended multidraw capillary tube (G7137-68307) was connected to the needle seat and injection valve with a union for large volume injection (200&nbsp;µL). The data were acquired with MassHunter acquisition software version 12.2. All LC/MS parameters are shown in Table 1 and 2. PFAS multiple reaction monitoring (MRM) transition methods were imported from the PFAS MRM database (G1736AA) while labelled homologues were optimized to obtain correct MRM transitions (Table 3).</p><h4><strong>Conclusion&nbsp;</strong></h4><p>This study demonstrates a practical large‑volume dilute-and-shoot workflow for the determination of PFAS in drinking water using the Agilent 1290 Infinity II LC coupled to the 6495D triple quadrupole LC/MS, and Agilent Altura Poroshell PFAS column. With 200 µL water samples diluted in methanol can be injected directly, eliminating the need for SPE concentration and significantly reducing sample preparation time. This method exhibits good sensitivity, accuracy, and reproducibility. The Altura PFAS column maintained consistent peak performance and retention stability even at low sub‑ppt concentrations, supporting long‑term reliability for trace‑level PFAS monitoring. Overall, the findings highlight the method potential to support routine, high‑sensitivity PFAS monitoring in drinking water laboratories.</p><h3><strong>2. KNAUER: Size matters - How to perform narrow calibration using the ClarityChrom® GPC Extension</strong></h3><ul><li>Technical note</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/VTN_0049_knauer_size_matters_how_to_perform_narrow_calibration_using_the_claritychrom_gpc_extension_3cfdc7a45b.pdf"><strong>Full PDF for download</strong></a></li></ul><p>Gel Permeation Chromatography (GPC), also known as Size Exclusion Chromatography (SEC), is a separation technique that separates molecules based on their hydrodynamic size rather than chemical interactions. In a GPC column, separation is based on the ability of molecules to access the pores of the stationary phase. Smaller molecules can penetrate these pores and therefore spend more time inside the column, resulting in a delayed elution. Larger molecules, on the other hand, cannot enter the pores and pass through the column more quickly, leading to earlier elution.&nbsp;</p><p>As a result, molecules are separated by size in solution, providing the basis for the determination of molecular weight and molecular weight distributions. Calibration is therefore a fundamental requirement for ensuring the accuracy and reliability of the results. The ClarityChrom® GPC Extension enables users to efficiently create and apply different calibration models for precise analysis. The workflow presented here focuses on narrow calibration using standards with defined molecular weights and low polydispersity (PD ≈ 1).</p><h4><strong>Material and Methods</strong></h4><ul><li><strong>Software&nbsp;</strong><ul><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=503&amp;search=ClarityChrom"><strong>ClarityChrom</strong></a>® 10.1 - station single instrument license one time base</li><li>ClarityChrom® 10.1 - GPC license for GPC data processing &nbsp;</li></ul></li><li><strong>Pump: </strong><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/2372"><strong>AZURA P 6.1L isocratic HPLC pump</strong></a> with 10 ml pump head for normal phase applications, stainless steel&nbsp;</li><li><strong>Degasser: </strong>Analytical 2 channel GPC degasser&nbsp;</li><li><strong>Autosampler:</strong> <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/2375"><strong>AZURA® AS 6.1L</strong></a>, analytical HPLC autosampler, 862 bar&nbsp;</li><li><strong>Detector:</strong> <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/2429"><strong>AZURA® RID 2.1L</strong></a>, analytical refractive index detector&nbsp;</li><li><strong>Thermostat: </strong><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/2376"><strong>AZURA® CT 2.1</strong></a> ATC00 Capillaries Start-Up Kit with flexible, precut capillaries for analytical HPLC systems with 1/16" connections</li></ul><h4><strong>Conclusion</strong></h4><p>This technical note demonstrates how to successfully create and apply a narrow calibration using the ClarityChrom® GPC Extension. By following the outlined workflow, users can ensure reliable calibration and determination of molecular weight and molecular weight distributions. The described approach supports consistent and reproducible results, making it a valuable tool for routine GPC/SEC analysis. For further optimization and advanced applications, additional related technical and application notes can be consulted.</p><h3><strong>3. Shimadzu: UHPLC Method for Sensitive Automatic Analysis of Thirty-Seven D/L-Amino Acids and for Liquor Profiling</strong></h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_01_01169_en_2dab331398.pdf"><strong>Full PDF for download</strong></a></li></ul><h5><strong>User Benefits</strong></h5><ul><li>Enables high-sensitivity simultaneous fast analysis of thirty-seven D/L-amino acids using simple operations.</li><li>Good reproducibility of analytical results can be achieved by keeping the derivatization reaction time constant.</li><li>Statistical analysis software enables easy multivariate analysis of multiple samples.</li></ul><p>Recent advances in analytical techniques have revealed the presence of D-amino acids in fermented foods and biological samples and clarified their role in the taste, preservation, and aroma of foods , and as potential disease biomarkers. Therefore, the demand for D/L separation of amino acids is increasing. Because D-amino acids are only present in trace amounts in fermented foods and biological systems, unlike L-amino acids, it is necessary to determine the concentration of each D-amino acid by separating them from the high concentrations of Lamino acids.&nbsp;</p><p>A comprehensive method for quantitating the thirty-seven D/Lamino acids was previously reported1), in which two chiral derivatizing reagents were employed to provide different diastereomers for each amino acid, with the instrument automatically switching between two separation methods to analyze each sample twice.&nbsp;</p><p>This article introduces an improved method that employs a single chiral derivatizing reagent to enable simultaneous analysis of D/L-amino acidsin a shorter time.</p><h4><strong>D/L-Amino Acid Analysis by UHPLC&nbsp;</strong></h4><p>In general, LC/MS or multi-dimensional LC is used to analyze D/L-amino acids by HPLC, because it is difficult to separate proteinogenic D/L-amino acids with a single separation mode. However, it is known that LC/MS is susceptible to matrix effects and less quantitative than HPLC. It is also known that the multidimensional LC method requires a long analysis time and very complicated HPLC setup. Therefore, a simple operational method that provides good separation for D/L-amino acids in a short time is needed.&nbsp;</p><p>For food analysis, a small particle column is used to achieve appropriate separation of the small amounts of D-amino acids from the large amounts of L-amino acids and co-existing contaminants. A <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=1&amp;search=X3"><strong>UHPLC system (Nexera X3</strong></a>) was employed in this study due to the increased system pressure caused by the use of a small particle column.</p><h4><strong>Conclusion&nbsp;</strong></h4><p>A method was developed for simultaneous separation of OPA/NIBC diastereomers for thirty-seven D/L-amino acids using a simple UHPLC system in approximately half the time of the conventional methods. By optimizing the derivatization reaction, all compounds were determined sensitively, accurately, and precisely. Separation of the target compounds from the contaminants was good in the liquor samples when evaluated using real liquor samples. It is expected to be easily applicable to D/L-amino acid profiling in food and beverage samples without using expensive MS detection or complicated multidimensional HPLC configurations as long as samples are prepared properly. Moreover, D/L-amino acid profiling could be used to research and develop foods containing D-amino acids intended to help to maintain and improve the intestinal environment, and could help in the early detection of diseases and determining optimal treatment strategies through biomarker discovery</p><h3><strong>4. Thermo Fisher Scientific: Screening of per- and polyfluoroalkyl substances (PFAS) in cosmetics: Utilizing a new combustion-ion chromatography system for total organic fluorine (TOF) analysis</strong></h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/ap_004098_ic_systems_combustion_ic_environmental_ap004098_na_en_a3a1d33a24.pdf"><strong>Full PDF for download</strong></a></li></ul><p>This application note describes a method for <strong>screening per- and polyfluoroalkyl substances (PFAS) in textiles</strong> using total organic fluorine (TOF) analysis by combustion-ion chromatography (C-IC). PFAS are widely used in textiles to provide water, oil, and stain resistance, but increasing concerns about their environmental persistence and potential health effects have led to stricter regulations worldwide. California’s AB 1817 legislation, for example, limits TOF concentrations in textiles to 100 ppm beginning in 2025 and 50 ppm by 2027, creating a need for reliable analytical methods capable of assessing PFAS content in textile products.</p><p>The study evaluates a new <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/2150"><strong>Thermo Scientific Cindion Combustion Ion Chromatography System</strong></a>, which combines a Dionex Inuvion IC system with a Cindion combustion/absorption module. The system features an optimized Z-fold combustion tube design that improves combustion efficiency, shortens analysis time, reduces instrument footprint, and allows complete control through Chromeleon software. Unlike surface-sensitive techniques such as PIGE, the combustion-IC approach analyzes the entire sample, providing results that are independent of sample thickness. The method measures total fluorine (TF) after combustion and total inorganic fluorine (TIF) by direct IC analysis, with TOF calculated as the difference between TF and TIF.</p><p>To validate the approach, six textile samples representing waterproof and stain-resistant consumer products were analyzed and compared with results previously obtained using a Nittoseiko combustion-IC system. TOF concentrations ranged from approximately 1 ppm in one nylon fabric to nearly 375 ppm in a polyester baby bib. The values generated by the new Cindion system showed excellent agreement with the reference system, achieving between 100% and 105% of the previously reported results. Reproducibility was also strong, with relative standard deviations below 8% for all samples.</p><p>The authors conclude that the new Cindion C-IC platform provides an accurate, reliable, and efficient solution for PFAS screening in textiles. In addition to matching the performance of the established combustion-IC method, the enhanced system offers a flexible “2-in-1” configuration that allows seamless switching between combustion-IC and standalone IC operation. This improves workflow efficiency, reduces manual intervention, and provides manufacturers and testing laboratories with a practical tool for monitoring compliance with evolving PFAS regulations in textile products.</p><h3><strong>5. Waters Corporation: Advanced Acquisition Modes for the </strong><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/2433"><strong>Xevo MRT P10 Mass Spectrometer</strong></a></h3><ul><li>Brochure</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/720009362_9baa39e7de.pdf"><strong>Full PDF for download</strong></a></li></ul><div><div><section><div><div><div><div><div><div><p>The Waters solution sheet introduces the <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/2433"><strong>Xevo MRT P10 Mass Spectrometer</strong>,</a> a next-generation high-resolution mass spectrometer designed to provide significantly greater analytical depth, sensitivity, and flexibility for modern omics workflows. Compared with the previous Xevo MRT platform, the instrument delivers a reported <strong>20-fold increase in MS/MS sensitivity</strong>, incorporates Wideband Enhanced Duty Cycle (WB EDC) technology, and supports ultrafast acquisition rates of up to <strong>100 Hz for MS data</strong> and <strong>200 Hz for MS/MS data</strong>. These performance improvements are intended to enhance the detection of low-abundance compounds while maintaining high-quality spectral information across complex biological samples.</p><p>A major focus of the document is the introduction of the new <strong>SONAR Pulse Acquisition Mode</strong>, an advanced data-independent acquisition (DIA) approach. SONAR Pulse improves selectivity by rapidly stepping a quadrupole isolation window across a defined precursor mass range, allowing fragment ions to be associated with narrower precursor windows than in conventional DIA experiments. This strategy reduces spectral complexity, improves confidence in compound identification, and increases the likelihood of detecting low-level analytes that might be missed by traditional data-dependent acquisition (DDA) methods. The method supports precursor and product ion scans up to m/z 2000, multiple quadrupole isolation window sizes, acquisition speeds up to 200 Hz, and full compatibility with WB EDC technology.</p><p>The second major innovation described is <strong>Mixed Mode Acquisition</strong>, a hybrid workflow that combines targeted and untargeted analysis within a single injection. In this approach, high-sensitivity <strong>Tof MRM</strong> quantification is performed simultaneously with untargeted DIA (MSE) acquisition. This enables users to obtain quantitative data for predefined targets while also collecting comprehensive full-scan information for discovery and screening purposes. The workflow integrates seamlessly with Waters software tools, allowing targeted quantification through the MS Quan application and untargeted analysis through UNIFI or export to open data formats such as mzML for processing in third-party software packages including MZmine, MS-DIAL, DIA-NN, PEAKS, and Progenesis QI.</p><p>According to Waters, both acquisition strategies are designed to maximize information obtained from each sample injection. SONAR Pulse emphasizes deeper molecular coverage, improved selectivity, and simplified interpretation of complex DIA datasets, while Mixed Mode provides a unified quantitative–qualitative workflow that combines targeted measurement and discovery screening without compromising sensitivity or acquisition speed. Together, these capabilities position the Xevo MRT P10 as a versatile platform for metabolomics, lipidomics, proteomics, and other multiomics applications where both comprehensive characterization and accurate quantification are required.</p></div></div></div></div></div></div></section></div></div>

News from LabRulezLCMS Library - Week 25, 2026

News from LabRulezLCMS Library - Week 26, 2026

<p><strong>Our Library never stops expanding. What are the most recent contributions to LabRulezLCMS Library in the week of 6th July 2026? Check out new documents from the field of liquid phase, especially HPLC and LC/MS techniques!</strong></p><blockquote><p><span style="font-size:20px;">👉 </span><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library"><span style="font-size:20px;"><strong>SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT LCMS AND RELATED TECHNIQUES</strong></span></a></p></blockquote><blockquote><p><strong>👉 Need info about different analytical techniques?</strong> Peek into <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library"><strong>LabRulezGCMS</strong></a> or <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library"><strong>LabRulezICPMS</strong></a> libraries.</p></blockquote><p>This week we bring you application notes by <strong>Agilent Technologies </strong>and<strong> Metrohm </strong>and posters by<strong> Shimadzu/ASMS, Thermo Fisher Scientific/ASMS </strong>and <strong>Waters Corporation/ASMS!</strong></p><h3><strong>1. Agilent Technologies: Determination of 41 Per- and Polyfluoroalkyl Substances (PFAS) in Cosmetics</strong></h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_captiva_emr_pfas_food_ii_cartridge_5994_9111en_agilent_be91861646.pdf"><strong>Full PDF for download</strong></a></li></ul><p>Per- and polyfluoroalkyl substances (PFAS) are synthetic compounds composed of highly stable carbon–fluorine (C–F) bonds, giving them exceptional thermal and chemical stability, leading to poor environmental degradability. PFAS have been used in cosmetics to provide water resistance, oil repellency, or application smoothness. The unintentionally presented PFAS residues in raw materials may remain in finished cosmetic products, and can be absorbed through the skin. Lip products and spray type products can also lead to inhalation or oral exposure to residues.<sup>1,2</sup>&nbsp;</p><p>Agilent Captiva EMR PFAS Food cartridges are designed to provide streamlined and comprehensive matrix removal after QuEChERS extraction for complex sample matrices, demonstrating effective matrix cleanup efficiency and excellent performance for quantitative PFAS analysis.<sup>3,4</sup> In this study, we performed QuEChERS extraction followed by cleanup with Captiva EMR PFAS Food II cartridges for PFAS analysis in five types of cosmetics.</p><h4><strong>Experimental</strong></h4><h5><strong>Equipment and materials&nbsp;</strong></h5><p>The study was performed using an <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=10&amp;search=1290+Infinity+III"><strong>Agilent 1290 Infinity III LC</strong></a> system consisting of an Agilent 1290 Infinity III high-speed pump (G7120A), an Agilent 1290 Infinity III multisampler (G7167B), and an Agilent 1290 Infinity III multicolumn thermostat (G7116B). The LC system was coupled to an <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=10&amp;search=6495D"><strong>Agilent 6495D triple quadrupole LC/MS system</strong></a> (G6495D) equipped with an Agilent Jet Stream Electrospray ion source. Agilent MassHunter Workstation software was used for data acquisition and analysis.&nbsp;</p><p>The 1290 Infinity III LC system was modified using an Agilent InfinityLab PFAS Analysis HPLC conversion kit (part number 5004-0006), including an Agilent InfinityLab PFC delay column, 4.6 × 30 mm (part number 5062-8100). Chromatographic separation was performed using an Agilent <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=10&amp;search=ZORBAX+RRHD+Eclipse+Plus"><strong>ZORBAX RRHD Eclipse Plus</strong></a> C18, 95 Å, 2.1 × 100 mm, 1.8 µm (part number 959758-902).</p><h4><strong>Results and discussion&nbsp;</strong></h4><h5><strong>Chromatography and calibration curve linearity&nbsp;</strong></h5><p>Figure 2 shows the overlaid chromatograms for 41 PFAS calibration standards, including 0.05, 0.1, 0.2, 0.5, 1.0, 2.0, 5.0, and 10.0 ng/mL in ACN. The table on the right shows the peaks identification and corresponding retention time. Across 41 PFAS compounds, R² values ranged from 0.9940 to 0.9998, indicating excellent linearity for all analytes' calibration curves across the calibration range of 0.05 to 10.0 ng/mL.</p><h5><strong>PFAS detection in real cosmetic samples&nbsp;</strong></h5><p>Of the 15 cosmetic products assessed, one eyeshadow sample was detected with a trace level of positive PFAS analytes, including PFHeA, PFHpA, PFNA, and PFOA, at about 0.1 ng/g in the sample. Figure 5 shows the method blanks and positive detection of PFHpA and PFNA in this eyeshadow&nbsp;product.</p><h4><strong>Conclusion&nbsp;</strong></h4><p>A simplified, rapid, and reliable method using QuEChERS extraction followed by EMR mixed-mode passthrough cleanup using the Agilent Captiva EMR PFAS Food II cartridge and LC/MS/MS detection was developed for 41 PFAS analysis in cosmetics.</p><h3><strong>2. Metrohm: brightRC – Advanced brightener analysis with a response curve</strong></h3><p><strong>Next-level brightener determination in nonlinear systems</strong></p><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_v_242_download_83376b2923.pdf"><strong>Full PDF for download</strong></a></li></ul><h4><strong>WHAT IS BRIGHTRC?&nbsp;</strong></h4><p>brightRC is a response curve calibration approach for the determination of brightener-type additives by CVS or CPVS (Cyclic Pulse Voltammetric Stripping), hence the name «brightRC». This technique is suitable to measure brightener content in copper baths for plating. The method is based on signal normalization using the electrolyte value, which is the response for the virgin makeup solution (VMS) saturated with suppressor, and brightener defined as Q0 in the viva software. All recorded signals are divided by Q0 and the normalized values are plotted against concentration to generate an external calibration curve. This calibration can then be used for routine sample determination without repeated standard additions.&nbsp;</p><p>The sample is simply measured using the same method as the calibration, signals are normalized and evaluated using the mathematically fitted calibration curve. By decoupling calibration from sample measurement, brightRC removes the need for repeated standard additions with each sample measurement, enabling faster and more efficient routine analysis.&nbsp;</p><p>The brightRC calibration approach supports flexible regression models including quadratic and nonlinear regression. This allows reliable quantification of additive systems that do not exhibit a wide linear working range or exhibit nonlinear response characteristics, thereby expanding the range of applicable brightener chemistries.&nbsp;</p><p>One important detail that further differentiates brightRC from the MLAT approach relates to normalization of the signal for calibration and sample analysis. This normalization approach improves measurement robustness as variations in absolute signal intensity naturally occurring over the working day are mathematically compensated.</p><h4><strong>HOW DOES BRIGHTRC WORK IN PRACTICE?&nbsp;</strong></h4><p>The brightRC workflow separates calibration and sample analysis. It can be implemented in different setups (from manual to fully automated) depending on the additive system and concentration range. After recording the electrolyte value, calibration standards are measured to establish the calibration curve, otherwise known as the response curve. Once the calibration is stored, samples are determined with the same CVS or CPVS method, without further standard additions. The sample concentration is automatically calculated from the normalized signal using the calibration curve.&nbsp;</p><p>For sample measurement, viva 4.0 provides two practical approaches:&nbsp;</p><ol><li>«brightRC with solution exchange»&nbsp;</li><li>«brightRC with sample dilution» Both variants follow the same calibration principle and differ only in the sample handling strategy.</li></ol><h4><strong>WHEN TO USE BRIGHTRC?&nbsp;</strong></h4><p>brightRC is ideal for routine brightener control in stable plating baths where high sample throughput is required. It is particularly suitable when matrix conditions are consistent and electrode fouling is limited. The approach is especially advantageous for additive systems exhibiting nonlinear signal behavior. If strong matrix variations, significant breakdown products, or severe electrode fouling are expected and a linear correlation between signal and analyte concentration is guaranteed, standard addition techniques such as MLAT are preferred because they may provide additional robustness.</p><h3><strong>3. Shimadzu / ASMS: PFAS Analysis of Leachate: Evaluating Key Sample Preparation and LC–MS/MS Parameters for Improved Performance</strong></h3><ul><li>Poster</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/WP_255_PFAS_Analysis_of_Leachate_Evaluating_Key_Sample_Preparation_and_LC_MSMS_Parameters_for_Improved_Performance_1114ee264c.pdf"><strong>Full PDF for download</strong></a></li></ul><p>Landfill leachate is a highly complex and variable matrix that poses significant challenges for the analysis of per- and polyfluoroalkyl substances (PFAS). Although U.S. Environmental Protection Agency Method 1633A provides a standardized framework for PFAS quantitation,1 analytical performance remains strongly influenced by sample preparation, chromatographic separation, and mass spectrometric conditions. Landfill leachate samples were extracted using WAX SPE following EPA 1633A and analyzed by LC–MS/MS using a <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=1&amp;search=LCMS-8060"><strong>Shimadzu LCMS-8060</strong></a><strong> </strong>under negative ESI conditions. This study evaluates the key factors governing LC–MS/MS sensitivity, signal response, and reproducibility in landfill leachate, including a systematic assessment of SPE, chromatographic behavior, and ionsource conditions across PFAS classes (Figure 1).</p><h4><strong>Results&nbsp;</strong></h4><p>Chromatographic performance was evaluated across four C18 columns (A–D) using peak area, height, asymmetry, and HETP. Two columns produced a higher signal and improved peak shape, while the remaining columns showed greater efficiency. Under repeated batches followed by storage in acetonitrile, the Shimadzu GIST column produced a consistent signal (≤15% change), whereas another column showed 20–50% signal loss, particularly for long-chain PFAS and precursors, indicating greater susceptibility to matrix accumulation (Figure 2).</p><h4><strong>Conclusion&nbsp;</strong></h4><ul><li>PFAS analytical performance was dependent on compoundclass-dependent extraction, chromatography, and ionization behavior.&nbsp;</li><li>GIST demonstrated lower signal variability under repeated matrix exposure, with lower signal degradation than alternative C18 phases.</li><li>Neutral PFAS showed poor retention on WAX sorbents, requiring optimization beyond standard EPA 1633A extraction conditions.&nbsp;</li><li>PFCA response was more influenced by gas flow conditions, whereas PFSA response was more sensitive to source temperature conditions.</li></ul><h3><strong>4. Thermo Fisher Scientific / ASMS: Ultra-high throughput proteomics at &gt;500 samples/day using advanced </strong><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/398"><strong>Vanquish Neo UHPLC</strong></a><strong> methods with </strong><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1959"><strong>Orbitrap Astral Zoom MS</strong></a></h3><ul><li>Poster</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/po_004708_lsms_ultra_high_throughput_vanquish_astral_proteomics_po004708_asms2026_na_en_f6499c3eec.pdf"><strong>Full PDF for download</strong></a></li></ul><p>High-throughput mass spectrometry is increasingly critical for large-cohort proteomics, population-scale studies, and screening applications. While established LC–MS platforms routinely support several hundred samples per day, further increases in throughput are often limited by chromatographic stability, robustness, and reproducibility under ultra-short gradient conditions, as well as the acquisition speed of the mass spectrometer. Here, we describe an advanced ultra-high-throughput LC–MS methodology developed on the Thermo Scientific Vanquish Neo UHPLC system and Thermo Scientific Orbitrap Astral Zoom mass spectrometer. The goal of this work was to extend the practical throughput limits of LC–MS while achieving deep proteome coverage and maintaining run-to-run reproducibility.</p><h4><strong>Materials and methods</strong></h4><h5><strong>LC-MS analysis&nbsp;</strong></h5><p>Samples were separated on a Thermo Scientific 150 µm × 70 mm C18 column (prototype, not commercially available yet) operated at 4 µL/min using a <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/398"><strong>Vanquish Neo UHPLC system</strong></a> in NanoCap Trap&amp;Elute configuration at room temperature. Prototype methods allowing for reduced LC duty cycles (approx. 1 min of sample pickup/loading and integrated trap-column offline wash) were applied, the standard gradients were adjusted to 1 – 3 min. The Thermo Scientific PepMap Neo 5 µm C18 300 µm × 5 mm cartridge was used as trap column and the separation column connected with a 15 µm ID capillary Thermo Scientific EASY-Spray emitter (ES994) to an EASY-Spray source. The <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1959"><strong>Orbitrap Astral Zoom MS</strong></a> (ICSW AST 2.2) was operated in a dataindependent acquisition (DIA) mode, MS method parameters are given in Table 1. Comparative data for the chemoproteomics samples at lower throughputs (60-300 SPD) were acquired using an EASY-Spray 150 µm × 150 mm C18 column (ES906), as described before.&nbsp;</p><h5><strong>Data analysis&nbsp;</strong></h5><p>The raw data files were processed with Spectronaut® 20.5 software (Biognosys AG), <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1782"><strong>Thermo Scientific Proteome Discoverer </strong></a>3.3 SP1 with <strong>CHIMERYS 5.0 </strong>or DIA-NN Enterprise 2.3.2 (Aptila Biotech GmbH) nodes using default settings as specified in the individual figures. The data was searched against the Homo sapiens SwissProt database (TaxID=9606: 42,252 sequences) and contaminants FASTA file. Peptide numbers correspond to unique stripped peptides</p><h4><strong>Conclusions&nbsp;</strong></h4><ul><li>The advanced Vanquish Neo UHPLC methodology in combination with the Orbitrap Astral Zoom MS delivered highly reproducible, deep and precise proteome profiling across ultra-high-throughput regimes (600 SPD) exceeding current field benchmarks.&nbsp;</li><li>The workflow enables rapid chemoproteomic screening, as demonstrated with activity-based protein profiling (ABPP) samples, reliably identifying enriched putative target proteins of an antibiotic small molecule probe.</li></ul><h3><strong>5. Waters Corporation / ASMS: Assessing Relative Response of Four European-Regulated PFAS in Human Serum Using Cyclic Ion Mobility MS</strong></h3><ul><li>Poster</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/720009410_c98e7c87ec.pdf"><strong>Full PDF for download</strong></a></li></ul><div><div><section><div><div><div><div><div><div><p>The poster presents an LC-Cyclic-IMS-MS approach for assessing four European-regulated PFAS—PFOS, PFOA, PFNA, and PFHxS—in human serum. The study focuses on environmental exposure monitoring in Ghanaian firefighters and e-waste handlers, using ion mobility mass spectrometry to add separation power and improve identification confidence in complex biological matrices. The work is motivated by increasing regulatory concern around PFAS toxicity, bioaccumulation, and the need for reliable exposure assessment in human biofluids.</p><p>The experimental workflow combined reversed-phase LC with a quadrupole-cyclic ion mobility-time-of-flight MS system (<a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/202"><strong>SELECT SERIES</strong> <strong>Cyclic IMS</strong></a>). Human serum samples were prepared using SPE µElution plates with a polymeric reversed-phase/weak anion exchange sorbent. The LC system was modified with PFAS-free components and an isolator column to reduce background contamination, which is especially important for trace-level PFAS analysis. Identification was supported by retention time, accurate mass, isotopically labelled internal standards, and collision cross section values.</p><p>The results showed detectable levels of the four regulated PFAS in both occupational groups, with a combined detection rate of 83% across human serum samples and NIST reference standards. Firefighter samples generally showed higher concentration ranges than e-waste handler samples, especially for PFOS, PFOA, PFNA, and PFHxS. For example, PFNA reached up to 5.713 ng/mL in firefighter serum, compared with up to 1.513 ng/mL in e-waste handler serum.</p><p>Overall, the poster concludes that LC-Cyclic-IMS-MS provides a highly specific strategy for PFAS analysis in complex biological samples. Ion mobility and CCS values improve confidence in trace-level identification and help distinguish target PFAS from co-eluting matrix background. The authors suggest that this approach can support both targeted PFAS monitoring and broader non-targeted screening of known and emerging PFAS, while also helping future studies connect exposure data with environmental fate and potential toxicological effects.</p></div></div></div></div></div></div></section></div></div>

News from LabRulezLCMS Library - Week 28, 2026

<p><strong>Our Library never stops expanding. What are the most recent contributions to LabRulezLCMS Library in the week of 3rd August 2026? Check out new documents from the field of liquid phase, especially HPLC and LC/MS techniques!</strong></p><blockquote><p><span style="font-size:20px;">👉 </span><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library"><span style="font-size:20px;"><strong>SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT LCMS AND RELATED TECHNIQUES</strong></span></a></p></blockquote><blockquote><p><strong>👉 Need info about different analytical techniques?</strong> Peek into <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library"><strong>LabRulezGCMS</strong></a> or <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library"><strong>LabRulezICPMS</strong></a> libraries.</p></blockquote><p>This week we bring you posters by <strong>Agilent Technologies / ASMS, Shimadzu / ASMS, Thermo Fisher Scientific / HPLC Symposium </strong>and<strong> Waters Corporation / ASMS </strong>and application note by<strong> Metrohm!</strong></p><h3><strong>1. Agilent Technologies / ASMS: Ultra-Trace Quantification of N-Nitroso-desmethyl-sumatriptan with Interference Resolution Using LC–TQ</strong></h3><ul><li>Poster</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/1290_infinity_iii_uhplc_6495d_lc_tq_desmethyl_sumatriptan_asms_2026_mp_667_agilent_ebb0888227.pdf"><strong>Full PDF for download</strong></a></li></ul><p>Sumatriptan succinate, an antimigraine drug contains nitrosylating functional groups and is susceptible to forming its own nitrosamine drug substance-related impurity (NDSRI), specifically N-nitroso-desmethylsumatriptan. As a Category 1 genotoxic impurity, its specification limit is established at 0.0428 ppm with respect to the API. In this study, samples and standards were prepared in methanol:water (1:1, v/v). The LC/TQ method was developed with a target limit of detection (LOD) at least 20-fold lower than the specification limit to ensure adequate sensitivity. Analytical data were collected in replicate for a 10 mg/mL API sample, as well as LOQ- and specification-level spiked samples, to evaluate recovery, relative standard deviation (RSD), linearity, and repeatability.</p><h4><strong>Experimental</strong></h4><ul><li><strong>LC System: </strong><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=10&amp;search=1290+Infinity+III+UHPLC"><strong>1290 Infinity III UHPLC</strong></a></li><li><strong>MS:</strong> <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=10&amp;search=6495D"><strong>6495D LC/TQ</strong></a></li><li><strong>Column:</strong> <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=10&amp;search=Poroshell+120+EC+C18"><strong>Poroshell 120 EC C18</strong></a>, 3x150mmx2.7µm, 40 Deg C</li></ul><h4><strong>Conclusions&nbsp;</strong></h4><ul><li>A sensitive and robust method has been developed for N-nitroso-desmethyl Sumatriptan in Sumatriptan.&nbsp;</li><li>Method LOQ is 10% lower than specification level, RSD of &lt;5%, and linearity across 0.00214 to 0.1 ppm.&nbsp;</li><li>The recovery of NDSRI in Sumatriptan at LOQ level and specification level are 95%.</li></ul><h3><strong>2. Metrohm: Moisture analysis of rebaudioside M by Karl Fischer titration</strong></h3><p><strong>Simplified rebaudioside M moisture determination via volumetric Karl Fischer titration paired with an oven system</strong></p><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_k_075_download_59f185c238.pdf"><strong>Full PDF for download</strong></a></li></ul><p>Natural sweeteners like stevia and its derivatives are an increasingly important part of the global sweetener market as more consumers substitute sugar with healthier alternatives. Stevia’s derivatives are significantly sweeter than table sugar. These compounds are estimated to be 50 to 300 times sweeter in comparison. This sweet taste coupled with the fact that the human body cannot metabolize steviol glycosides (i.e., they contribute zero calories to one’s diet), makes them a very attractive sugar replacement.&nbsp;</p><p>The moisture content of stevia materials is a crucial factor when discussing their shelf life and stability. Measuring the moisture content of a stevia derivative, rebaudioside M, using an oven system coupled with volumetric Karl Fischer (KF) titration provided a repeatable approach for quantifying the moisture content of this material.</p><h4><strong>Experimental</strong></h4><p>The analysis was carried out with a Double Pt ring electrode for volumetry (6.00346.100). Testing was executed on the <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=220&amp;search=874+Oven+Sample+Processor"><strong>874 Oven Sample Processor</strong></a> (2.874.0120) coupled with an <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=220&amp;search=852+Titrando"><strong>852 Titrando</strong></a> (2.852.0060). Approximately 0.2 g of sample was weighed into an 874 Oven Sample Processor 6 mL vial and placed onto the rack. The oven was set to a temperature of 100 °C, and the evaporated moisture was carried to the volumetric titration vessel by nitrogen gas flow at 70 mL/min. The moisture from the sample was titrated with Hydranal Comp 5 reagent.</p><h4><strong>Conclusion</strong></h4><p>Natural low-calorie sweeteners like stevia derivatives are growing in popularity as people choose healthier alternatives to sugar. Working to develop standardized, specific methodology can help support sweetener industry development, effective quality assessment, and the evaluation of rebaudioside M and other steviol glycosides’ stability.&nbsp;</p><p>This Application Note provides a foundation for the analysis of stevia powder by Karl Fischer titration. An oven system paired with volumetric Karl Fischer analysis provides an accurate, repeatable method to evaluate stevia powder and its derivatives. This method’s compatibility with the 874 Oven Sample Processor allows increased sample throughput through automation, providing operators even more time to complete other important tasks in parallel.</p><h3><strong>3. Shimadzu / ASMS: Quantitative analysis of 6 beta blockers on an LCMS-8045RX</strong></h3><ul><li>Poster</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/WP_131_Quantitative_analysis_of_6_beta_blockers_on_an_LCMS_8045_RX_f596f609f4.pdf"><strong>Full PDF for download</strong></a></li></ul><p>Beta-adrenergic blocking agents, commonly known as beta blockers, competitively inhibit the binding of catecholamines such as epinephrine and norepinephrine to β-adrenergic receptors, thereby reducing heart rate and blood pressure. These drugs are widely prescribed for the treatment of hypertension, angina and heart failure<sup>1</sup> . However, beta blockers may also be misused by athletes resulting in their inclusion on the World Anti-Doping Agency (WADA) prohibited list<sup>2</sup> . Owing to both their therapeutic importance and potential misuse, sensitive and selective analytical methods are required for reliable detection and quantification. Liquid chromatography tandem mass spectrometry (LC-MS/MS) offers high sensitivity and specificity for such analyses.</p><h4><strong>Method</strong></h4><p>Nadolol, metoprolol, propranolol, atenolol &amp; carvedilol were purchased from Sigma Aldrich and Thermo Fisher Scientific. Standards were prepared in 1 mg/mL in LCMS grade methanol. <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=1&amp;search=Nexera+40"><strong>Nexera 40-series HPLC system</strong></a> connected to a <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=1&amp;search=LCMS-8045RX"><strong>LCMS-8045RX</strong></a> was used for data acquisition. The mixture of standards was further diluted in LCMS grade methanol (Sigma Aldrich) and Sigmatrix urine diluent to create the standards for the calibration curves. A Shim-pack Velox Biphenyl column was used for the chromatographic separation. All analytes were ionized with electrospray ionization (ESI) in positive ion mode.</p><h4><strong>Conclusion&nbsp;</strong></h4><ul><li>Superior sensitivity in complex matrices: Limit of Detection (at accuracy ±20% and S/N &gt; 3) of 0.010 ng/mL for all the analytes evaluated in this study.</li><li>Excellent linearity and accuracy: Linear responses (with R2 &gt; 0.99) observed across the evaluated concentration range, and consistent accuracy within ±20% for all 17 calibrants included in this study.&nbsp;</li><li>Optimized throughput: Automated interface and MRM optimization via LabSolutions Connect MRM ensured maximum signal-to-noise determination for this study, while the high-organic flush at the end of each run, maintained column integrity</li></ul><h3><strong>4. Thermo Fisher Scientific / HPLC Symposium: A switchable 2D-LC platform in PAT: routine UV monitoring or MS-based characterization of mAb PQAs directly from the bioreactor</strong></h3><ul><li>Poster</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/po_004764_hplc_vanquish_2dlc_mabs_analysis_bioreactor_samples_po004764_na_en_7a99c1b683.pdf"><strong>Full PDF for download</strong></a></li></ul><p>Monitoring quality attributes throughout the upstream processing of mAbs is critical due to potential effects of biological variability on product safety and efficacy. Thus, there is a growing need for streamlined analytical workflows that provide timely and reliable insights to enable fast and informed process decisions.</p><h4><strong>Materials and methods</strong></h4><ul><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/743"><strong>Thermo Scientific Vanquish Flex Simple</strong></a> Switch 2D-LC system for loop heart-cutting consisting of Quaternary Pump F (VF-P20-A), Binary Pump F (VF-P10-A-01), Dual Split Sampler FT (VF-A40-A-02), 2x Column Compartment H (VH-C10-A-03), and Diode Array Detector FG (VF-D11-A-01)&nbsp;</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1490"><strong>Thermo Scientific Orbitrap Exploris MX Mass Detector</strong></a> (BRE725536) with BioPharma option (BRE725539)&nbsp;</li><li>Thermo Scientific MAbPac Protein A column, 12 µm, 4 x 35 mm (PN 082539)&nbsp;</li><li>Thermo Scientific ProPac 3R SCX, 2 x 50 mm, 3 µm (PN 43103-052068)&nbsp;</li><li>Thermo Scientific MAbPac SEC-1, 5 µm, 4 x 300 mm (PN 074696)</li></ul><h4><strong>Data analysis&nbsp;</strong></h4><p><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/76"><strong>Thermo Scientific Chromeleon 7.3.2 Chromatography Data System (CDS) </strong></a>and <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1837"><strong>Thermo Scientific BioPharma Finder 5.2 software</strong></a></p><h4><strong>Conclusions&nbsp;</strong></h4><ul><li>Switchable 2D-LC-UV/MS offers a streamlined approach for at-line monitoring of mAb titer, charge and size variants directly from the bioreactor in &lt;1h.&nbsp;</li><li>UV monitoring provides quick and simple trendlines, while HRAM-MS allows deep characterization at intact level.&nbsp;</li><li>Near real-time information supports in-time process decisions to protect yield and product quality.</li></ul><h3><strong>5. Waters Corporation / ASMS: SOFTWARE TOOLS FOR AUTOMATED LC/MS ANALYSIS OF CRITICAL QUALITY ATTRIBUTES OF mRNA MOLECULES</strong></h3><ul><li>Poster</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/720009414_52de0bb71a.pdf"><strong>Full PDF for download</strong></a></li></ul><div><div><section><div><div><div><div><div><div><p>This poster presents an automated LC-MS workflow for evaluating three critical quality attributes (CQAs) of mRNA therapeutics: <strong>5′-capping efficiency, Poly(A) tail length and heterogeneity, and mRNA sequence integrity</strong>. A custom firefly luciferase (Fluc) mRNA construct containing a Cap-1 structure, 1,919 nucleotides, and a Poly(A) tail was used as the model sample. Importantly, all three CQAs were assessed using a <strong>single LC-MS assay</strong>, supported by specialized waters_connect software tools designed to streamline nucleic acid characterization from sequence entry through final data processing.</p><p>The analytical platform consisted of a <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/191"><strong>Waters ACQUITY Premier Binary UPLC System</strong></a><strong> with TUV detector coupled to a </strong><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1148"><strong>Xevo MRT Q-Tof Mass Spectrometer</strong></a>, which uses multi-reflectron time-of-flight technology. Separations were performed on an ACQUITY Premier OST 1.7 µm, 300 Å, 2.1 × 150 mm column, while data-independent acquisition was carried out in MSE mode. Data processing used the <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1544"><strong>waters_connect</strong></a><strong> Informatics Platform together with SYNTHETIC Library 2.0, MAP Sequence 2.0, and INTACT Mass 1.9</strong> applications. For sequence mapping, the mRNA was independently digested using four endonucleases—RNase T1, RapiZyme MC1, RapiZyme Cusativin, and human RNase4—providing complementary cleavage patterns.</p><p>The workflow produced detailed information on both capping and Poly(A) tail characteristics. The Fluc mRNA showed <strong>100% capping efficiency</strong>, with 62.7% carrying an m7GpppAm Cap-1 structure and 37.3% an m7GpppGm Cap-1 structure; no uncapped digestion product or Cap-related impurities were detected. Poly(A) tail analysis identified ten major species ranging from <strong>98-mer to 107-mer</strong>, resulting in an average Poly(A) tail length of <strong>102.3 nucleotides</strong>. The Xevo MRT Q-Tof provided high-resolution measurements—approximately 100,000 resolution in the examples shown—and very good mass accuracy for the detected Poly(A) species.</p><p>For sequence integrity, combining the four complementary enzymatic digestions achieved <strong>93.7% unambiguous mRNA sequence coverage</strong>, demonstrating the value of a multi-enzyme approach for comprehensive sequence confirmation. MAP Sequence 2.0 also automatically distinguished structural isomers using elevated-energy fragment-ion information, helping resolve isobaric and isomeric digestion products with less manual interpretation. Overall, the poster demonstrates that high-resolution MSE acquisition on the <strong>Xevo MRT Q-Tof combined with automated waters_connect informatics</strong> can provide an integrated and efficient approach for comprehensive characterization of key mRNA quality attributes.</p></div></div></div></div></div></div></section></div></div>

News from LabRulezLCMS Library - Week 32, 2026

Article

Product

Events

Webinars

Application

Academy

Video

Poster

Scientists

Plastics

Environment

Food

Water

Health

Presentation

Scientific article

Interview

Toxicology

Popularization

Science and research

Software

Covid-19

Career

Laboratories

Various

Zaměření

Type of News

Focus

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

European Symposium on Analytical Spectrometry (ESAS) 2026

2026 AOAC INTERNATIONAL Annual Meeting & Exposition

Bruker at the 7th European Symposium on Single Cell Proteomics

Targeted Hybridization Capture for Antimicrobial Resistance Surveillance in Complex Environmental Samples

Addressing LC Method Optimization - Scaling For Efficiency, Throughput And Reproducibility

Proteoform Studio software, top down made simple