Our Library never stops expanding. What are the most recent contributions to LabRulezGCMS Library in the week of 19th January 2026? Check out new documents from the field of the gas phase, especially GC and GC/MS techniques!<blockquote>👉 <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library">SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT GCMS AND RELATED TECHNIQUES</a></blockquote><blockquote>👉 Need info about different analytical techniques? Peek into <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library">LabRulezLCMS</a> or <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library">LabRulezICPMS</a> libraries.</blockquote>This week we bring you application notes by Agilent Technologies, BaySpec and Metrohm!<h3>1. Agilent Technologies: Micro GC Analysis of Permanent Gas Impurities in PEM Fuel Cell-Grade Hydrogen</h3>According to SAE J2719, ISO 14687, EN 17124, and ISO 19880-8<ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_micro_gc_analysis_gas_impurities_pem_fuel_5994_8830en_agilent_a5dca09e4b.pdf">Full PDF for download</a></li></ul>Quality requirements for hydrogen purity vary with application. Proton Exchange Membrane (PEM) fuel cell hydrogen is the application with the most stringent specification. Hydrogen purity specifications for other applications, i.e. residential or industrial use, typically allow for higher levels of specific&nbsp;contaminants.&nbsp;For PEM fuel cell-grade hydrogen, there are several key methods regulating quality. Some methods may also cover other scopes, but where they pertain to PEM fuel cell-grade hydrogen, they align on specific requirements for purity level and limit concentrations of specific contaminants.&nbsp;<ul><li>SAE J2719 specifies hydrogen fuel quality requirements for PEM fuel cell vehicles, such as hydrogen-powered cars.&nbsp;</li><li>ISO 14687 specifies minimum quality characteristics of hydrogen fuel for various applications, including residential, commercial, industrial, stationary systems, and vehicular use.&nbsp;</li><li>EN 17124 specifies the quality characteristics of hydrogen fuel dispensed at hydrogen refueling stations for use in PEM fuel cell vehicle systems.</li><li>ISO 19880-8 specifies the quality of the gaseous hydrogen at hydrogen distribution facilities and hydrogen fueling stations for PEM fuel cells for road vehicles.&nbsp;</li></ul>Micro GC is a suitable choice of technique for covering analysis of permanent gases in ultra high purity (UHP) hydrogen (oxygen, nitrogen, argon, helium, and methane). The small internal volume of the MEMS-based µTCD in the <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?manufacturerItems=1&amp;search=990+Micro+GC">Agilent 990 Micro GC</a> means that lower detection levels can be achieved when compared to regular TCDs, allowing for detection of contaminants in the single-digit ppm range. Note that ammonia, carbon monoxide, carbon dioxide, and formaldehyde can also be detected with Micro GC; however, additional/different columns might be required. Sensitivity requirements below 1 ppm may require alternate techniques.<h4>Experimental&nbsp;</h4>The method developed covers permanent gases defined in SAE J2719, and by default, also ISO 14687, ISO 19880‑8, and EN 17124. The <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?manufacturerItems=1&amp;search=990+Micro+GC">990 Micro GC</a> system was set up similar to the method described in Agilent application note 5994‑2138EN.1 A 20 m MS5A straight channel on hydrogen carrier gas was used. Table 2 lists experimental conditions for method development. A 20 m molsieve provides sufficient separation for the argon/oxygen peak pair at low-ppm concentrations.2 For best results, the column was operated at a low temperature of 30 °C. Hydrogen was used as carrier gas to completely mask the bulk hydrogen matrix peak, resulting in separation of the helium and neon baseline3 , while still allowing for a similar sensitivity as with the helium carrier. The hydrogen carrier allows helium (He), argon (Ar), oxygen (O2), nitrogen (N2 ), methane (CH4 ), and even neon (Ne) to be measured at their required levels. Carbon monoxide (CO) that elutes from the molsieve column is not part of the scope. SAE J2719 requires these to be measured at the sub-ppm level, which is too low for Micro GC. Table 3 lists the composition of calibration gas used. The system was calibrated using single‑point calibration.<h4>Conclusion&nbsp;</h4>The Agilent 990 Micro GC setup, described with a single 20&nbsp;m straight molsieve column running hydrogen carrier gas is capable of meeting the hydrogen quality requirement in SAE J2719 and other comparable UHP hydrogen methods for select permanent gases (He, Ar, O2, N2, CH4 ). The critical component, oxygen, can reliably be measured below the required five ppm level. Precision and accuracy are excellent for all components, and with a short runtime of five&nbsp;minutes, this analytical option can deliver 10–12 runs per hour. Detection of other components listed in SAE J2719, i.e.&nbsp;ammonia or CO/CO2 , will require different equipment.<h3>2. BaySpec: Detecting Toxins on Cannabis Leaves with Portable Miniature Mass Spectrometer</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/Bay_Spec_App_Note_Toxin_Detection_on_Cannabis_Leaves_with_Portability_Mass_Spectrometer_b15213c47e.pdf">Full PDF for download</a></li></ul>Mass spectrometry in connection with different separa‐ tion techniques currently represents the main analytical approach for determination of residual pesticides in the Food &amp; Agriculture industry. Traditionally, samples need to be collected and sent to a laboratory for analysis using techniques such as GC‐MS or HPLC‐MS, which are costly and time‐consuming. In addition, the conventional mass spectrometer usually requires laborious sample pre‐ treatment, which does not allow for immediate in‐situ sample determination.Presented in this application note are data from a ther‐ mal desorption electrospray ionization (TD‐ESI) or atmso‐ pheric pressure chemical ionization (APCI) source coupled to a portable mass spectrometer for toxin screening of cannabis leaves.&nbsp;&nbsp;Bayspec’s <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/2219">Portability mass spectrometer</a> is less than 10 kg, highly portable, and battery‐operated.&nbsp;&nbsp;Its linear ion trap mass analyzer can perform fast in‐field detection of analytes, including residual toxins, by direct sampling of the surfaces of fresh food and plant products without any sample pre‐treatment.&nbsp;&nbsp;In this study, BaySpec’s sampling probe was used to directly swab the surface of cannabis leaves and inserted into the TD‐ESI or APCI sample inlet system for real time analysis. Four different samples were studied:&nbsp;<ul><li>Fresh cannabis leaves&nbsp;</li><li>Fresh cannabis leaves sprayed with PBO&nbsp;</li><li>Fresh cannabis leaves sprayed with myclobutanil&nbsp;</li><li>Fresh cannabis leaves sprayed with paraquat</li></ul>All sprayed samples were air‐dried prior to screening.&nbsp;&nbsp;No sample preparation was done to test the leaves.&nbsp;&nbsp;Both TD‐ ESI and APCI ionization methods tested positive for THC and toxins where applicable.&nbsp;&nbsp;See Figure 3 for recorded spectra.&nbsp;&nbsp;&nbsp;&nbsp;Due to short analysis times (1‐5 seconds per sample), this technique allows for fast screening for applications in food and environmental safety. MS (as well as MS/MS) analyses can be performed on surface‐residual toxins at parts per billion levels.&nbsp; &nbsp; The TD‐ESI ion source with PortabilityTM miniature mass spectrometer is available from BaySpec.&nbsp; &nbsp;&nbsp;This system does not require any add‐ itional support, external po‐ wer or gases. The simple in‐ tuitive software interface is operated by touch screen and makes the instrument ex‐ tremely easy to control. The external TD‐ESI source is fully integrated into the main software environment and the turn‐key system is user‐ friendly, does not require excessive training, and can be operated by persons with no previous mass spectrometry experiences<h3>3. Metrohm: Monitoring phosphate reactions in real time with Raman spectroscopy</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_rs_054_download_d034c2ebb5.pdf">Full PDF for download</a></li></ul><h4>CURRENT METHODES FOR REACTION ANALYSIS</h4>Titration is highly effective for quantifying phosphate and sulfate species to determine reaction completion and final product composition in fertilizers. Gravimetric analysis is used to quantify insoluble byproducts like gypsum (CaSO4·2H2O). Both techniques require sample collection, hazardous reagents, and manual processing – all of which introduce time delays and incur costs with every measurement. This Application Note describes how Raman spectroscopy was used as an alternative method to monitor a simplified phosphate fertilizer production process under laboratory conditions.&nbsp;<h4>METHOD</h4><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=220&amp;search=+i-Raman">Raman spectroscopy</a> is well suited to monitor phosphate species due to its high selectivity and nondestructive nature. Furthermore, it can simultaneously detect sulfate ions, enabling real-time analysis of multi-component reaction systems. In this study, dicalcium phosphate (CaHPO4, hereafter referred to as DCP) is used as a model compound for phosphate rock. In a 100 mL beaker, 500 mg of DCP was dissolved in 10 mL of 0.5 mol/L hydrochloric acid (HCl) (Equation 1). To simulate industrial reaction conditions and introduce sulfate ions, 0.25 mL of 1.0 mol/L sulfuric acid (H2SO4) was then added. The use of low-concentration HCl ensures safe handling and facilitates clear identification of the sulfate (SO42−) Raman peak.<h4>CONCLUSION</h4>Raman spectroscopy proved to be an effective tool for monitoring a phosphate fertilizer production process, providing clear insights into phosphate speciation, sulfate concentration, and precipitation dynamics. Raman spectral changes revealed transitions in phosphate protonation states and the formation of calcium-based precipitates. These capabilities support enhanced process control and product quality in phosphate fertilizer manufacturing.

News from LabRulezGCMS Library - Week 04, 2026

Our Library never stops expanding. What are the most recent contributions to LabRulezGCMS Library in the week of 26th January 2026? Check out new documents from the field of the gas phase, especially GC and GC/MS techniques!<blockquote>👉 <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library">SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT GCMS AND RELATED TECHNIQUES</a></blockquote><blockquote>👉 Need info about different analytical techniques? Peek into <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library">LabRulezLCMS</a> or <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library">LabRulezICPMS</a> libraries.</blockquote>This week we bring you brochure by Agilent Technologies and application notes by BaySpec, Metrohm and Shimadzu!<h3>1. Agilent Technologies: Maintain Power Grid Integrity - Agilent transformer oil gas analyzers</h3><ul><li>Brochure</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/br_toga_gc_analyzer_5994_8705en_agilent_82106c7de8.pdf">Full PDF for download</a></li></ul>Agilent transformer oil gas analyzers (TOGA) are designed to help utilities and service laboratories maintain power grid integrity by monitoring the condition of electrical transformers through dissolved gas analysis (DGA). Transformer oil degrades under electrical, thermal, and mechanical stress, generating characteristic gases whose composition and ratios provide early warning of developing faults. By reliably identifying and quantifying these gases, TOGA systems enable predictive maintenance, help prevent catastrophic transformer failures, and support informed asset management decisions.The analyzers are built around the <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=10&amp;search=8890">Agilent 8890 gas chromatograph</a> and <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=10&amp;search=8697">8697 headspace sampler</a> and are factory-configured, tested, and performance-verified for immediate deployment. They support ASTM D3612 methods A and C, offering flexible configurations for vacuum extraction or headspace sampling. Automated operation allows unattended analysis of up to 120 samples, while high-performance Agilent J&amp;W PLOT columns ensure excellent separation, reproducibility, and reliable detection of key fault gases such as hydrogen, carbon oxides, methane, ethylene, acetylene, and higher hydrocarbons.Agilent TOGA systems are delivered as complete workflow solutions, minimizing method development time and accelerating system validation. Intelligent instrument diagnostics, microchannel-based electronic pneumatic control, and remote access capabilities improve reliability, uptime, and ease of operation. Integrated quality-control procedures—from factory testing through on-site installation—ensure consistent performance and traceability from day one.Data acquisition, analysis, and reporting are supported by <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=10&amp;search=OpenLab+CDS">OpenLab CDS</a>, which provides a unified platform with high data integrity, streamlined workflows, and secure records management. Combined with Agilent’s extensive service, training, and support offerings, TOGA analyzers represent a robust, future-ready solution for dissolved gas analysis in transformer oil, helping protect critical energy infrastructure while reducing operational risk<h3>2. BaySpec: Drug Screening using Compact Portable Device for Supervised Injection Sites</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/Bay_Spec_App_Note_Drug_Screening_Using_Portable_Mass_Spectrometer_for_Supervised_Injection_Sites_5d1c131cec.pdf">Full PDF for download</a></li></ul>In response to the rising epidemic, some governments have passed bills making supervised injection sites (SIS) a potential avenue for reducing the rate of drug overdoses. SISs are health care facilities where staff are trained to provide health education, support and connections to services as well as intervening in serious adverse events such as drug overdoses. They provide a safe, hygienic and non-judgement environment in which individuals may consume illicit drugs without fear of arrest.&nbsp;The benefits of SIS are to:&nbsp;(1) prevent an overdose from becoming fatal through quick intervention, (2) reduce the frequency of public injection and publicly discarded syringes, (3) increase access to health services including substance use treatment, and (4) change behaviors associated with acquiring HIV and hepatitis.&nbsp;The benefits of drug checking services within an SIS are:&nbsp;(1) it provides the consumer information about the contents of their drugs prior to consumption allowing them take steps to reduce their risk of overdose, (2) it identifies when a highly toxic substance may be in the local drug supply so advisories can be issued to local service agencies and first responders, (3) it encourages use of supervised injection services and the benefits mentioned above, and (4) it detects novel substances or drug combinations that may impact the consumer.&nbsp;Initially approved by the Canadian federal government in 2017, the nation now has four official SISs in operation in Ottawa and four sites approved in Toronto. While most SISs are prepared to respond quickly to overdoses, a better practice is to screen drugs for harmful impurities prior to injection. Some SISs are taking such precautions by providing the option for clients to test their drugs prior to injection with <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/2219">BaySpec’s Portability Mass Spectrometer</a>, a low maintenance, cost effective, portable instrument weighing only 20 pounds.<h3>3. Metrohm: Assessment of chocolate with Raman spectroscopy</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_rs_052_download_a849b96c87.pdf">Full PDF for download</a></li></ul><h4>Rapid quality control of different chocolate types&nbsp;</h4>Application Note AN-RS-052 In 2024, the global chocolate market was valued at approximately $131 billion USD. It is projected to reach approximately $173 billion by 2030, implying a steady growth rate of roughly 4% [1]. This growth is driven by sustained consumer demand and is expected to continue rising.&nbsp;Spectroscopy is increasingly utilized in chocolate manufacturing for quality control (QC), thanks to its ability to assess the composition of chocolate, providing a «fingerprint» spectrum that reveals its chemical details. Specifically, Raman can be used in QC to distinguish between types of chocolate, detect adulteration, measure crystallization and texture, and monitor the manufacturing process.&nbsp;This Application Note outlines techniques for effectively collecting Raman spectra from various chocolates, providing a foundation for quality assessment and adulteration detection.<h4>METHOD&nbsp;</h4>Raman data collection with an <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=220&amp;search=i-Raman+NxG+1064">i-Raman NxG 1064 </a>laboratory Raman system (Figure 2) was optimized by adjusting integration time and laser power (Table 3) to determine the best conditions to maximize signal strength and minimize risk of sample melting.All chocolate samples were analyzed by placing a piece of chocolate on the stage with a Raman probe securely locked above the sample (Figure 3). The optimal working distance was determined by adjusting the probe’s z-axis position while continuously monitoring the intensity of the Raman signal. Once the optimal focal distance is found, a distance regulator helps the operator position the probe on the sample to ensure consistent and reliable measurement.<h4>CONCLUSION</h4>This study highlights the capability of Raman spectroscopy for rapid, nondestructive measurements of chocolate quality indicators. PLS models demonstrate high predictive accuracy for both cocoarelated materials and sugar content. Increasing the number of samples and testing a broader range of chocolates would further improve the robustness and accuracy of the model. Overall, Raman spectroscopy, combined with chemometric modeling, offers a reliable QC method for routine and real-time chocolate analysis.<h3>4. Shimadzu: Analysis of Acetaldehyde and Limonene in Recycled PET Using an HS-GCMS System (Carrier Gas: H2)</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_01_00760_en_4ecf93333d.pdf">Full PDF for download</a></li></ul><h4>User Benefits</h4><ul><li>The gas released from the polymer can be easily measured without dissolving the polymer in a solvent, by using a headspace sampler (HS).&nbsp;</li><li>Using an HS-GC/MS system enables qualitative and quantitative analysis of target components in samples with a large number of contaminants that make it difficult to differentiate the targets from other components.&nbsp;</li><li>Analysis costs can be reduced by using hydrogen as a carrier gas, which is more affordable and readily available than helium</li></ul>Plastic is lightweight, strong, waterproof, and very convenient, making it an essential part of our modern lives. On the other hand, because it is a major contributor to environmental issues, such as ocean pollution and global warming, measures to reduce plastic usage are being undertaken in countries around the world. 1)&nbsp;In Japan, the Plastic Resource Circulation Promotion Act2) came into effect in April 2022. The act does not regulate plastic but rather promotes the establishment of a sustainable circular economy by encouraging collaboration among businesses, local governments, and consumers throughout the overall process of designing, manufacturing, selling, collecting, and recycling plastic products.&nbsp;One of these initiatives is the recycling of PET bottles for beverage use. When recycling beverage bottles, residual odors can be an issue, with substances like acetaldehyde from water bottles and limonene from citrus beverages known to persist in the containers. To address these residual substances, recycling companies are implementing unique strategies, one of which involves using gas chromatography-mass spectrometry (GC-MS) to quantify the residual materials. In this article, we present an example of qualitative and quantitative analysis of aldehydes and limonene in PET bottles using the <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=1&amp;search=GCMS-QP2020+NX">GCMS-QP2020 NX</a>/HS-20 NX, with hydrogen (H2) as the carrier gas.<h4>Conclusion</h4>By using hydrogen (H2) gas as the carrier gas, we were able to avoid the use of the hard-to-obtain helium gas. Additionally, by employing an HS-GC-MS system, we could qualitatively and quantitatively analyze acetaldehyde and limonene from PET without the need for cumbersome pretreatment.

News from LabRulezGCMS Library - Week 05, 2026

Our Library never stops expanding. What are the most recent contributions to LabRulezGCMS Library in the week of 2nd March 2026? Check out new documents from the field of the gas phase, especially GC and GC/MS techniques!<blockquote>👉 <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library">SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT GCMS AND RELATED TECHNIQUES</a></blockquote><blockquote>👉 Need info about different analytical techniques? Peek into <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library">LabRulezLCMS</a> or <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library">LabRulezICPMS</a> libraries.</blockquote>This week we bring you application notes by Agilent Technologies, BaySpec and Shimadzu and presentation by MDCW / JEOL!<h3>1. Agilent Technologies: Total Hydrocarbon Impurity Analysis in PEM Fuel Cell Grade Hydrogen Using the Agilent 8890 GC-FID System</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_hydrocarbon_impurity_analysis_pem_fuel_cell_8890_gcfid_5994_8935en_agilent_00a26949ef.pdf">Full PDF for download</a></li></ul>High-purity hydrogen is crucial for the optimal and long-term performance of fuel cells.&nbsp;Different than the industry grade hydrogen used for chemicals, refining, and metal processing, where small amounts of impurities are acceptable. Fuel cell hydrogen is required to meet the species-specific impurity limits described in the specifications. Such impurities include hydrocarbons, sulfur-containing compounds, ammonia, permanent gases, halogens, and formaldehyde. Each group of compounds has its own regulation limit. The limits are defined based on their impact on the fuel cell lifetime and performance. ISO 14687 and SAE J2719 are the most recognized standards for regulation of fuel cell hydrogen quality.&nbsp;Multiple testing points are implemented throughout the whole supply chain of fuel cell grade hydrogen—from its production, storage, and distribution to its final application. The analytical approaches employed depend on the impurity type and the corresponding limit. Among the varied contaminants, hydrocarbon impurity is controlled based on THC amount (excluding methane because it has a separate specific limit) and the quality limit as specified in ISO 14687 and SAE J2719 (2&nbsp;ppm).&nbsp;There are two ways to analyze THCs in hydrogen. One is to separate and detect each hydrocarbon, then add their concentrations to get the THC amount (excluding methane). This analytical approach is recommended by the GB/T 44238-2024 test method.1 The other way is by eluting all hydrocarbons as a single peak and quantitating the peak according to methane's response factor (RF). The total THC is then obtained by subtracting the methane amount, which is analyzed by a separate method.In this application note, THC impurity was tested using the second approach. An Agilent 8890 GC with FID system were used for THC analysis, and the Agilent <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=10&amp;search=990+Micro+GC">990 Micro GC</a> was used for methane measurement. The methane analysis solution is published in application note 5994-8830EN.2 Here, we will showcase THC analysis using the 8890 GC-FID system.&nbsp;<h4>Experimental&nbsp;</h4>The <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=10&amp;search=8890">8890 GC</a> is configured with one gas sampling valve, a split/splitless (S/SL) inlet, and a flame ionization detector (FID), as shown in Figure 1. The fixed volume of gas sample is injected into the S/SL inlet and part of the sample flows into an uncoated capillary column, then elutes off as a single peak for detection. Table 1 lists experimental conditions for the analysis. The standard gases shown in Table 2 are used to verify system precision, generate methane's RF, and calculate method detection limit (MDL).<h4>Conclusion&nbsp;</h4>This application note demonstrates THC&nbsp;analysis in fuel cell hydrogen using the Agilent 8890 GC-FID system. The hydrocarbons eluted as a single peak on an uncoated column and were quantitated using methane's RF. The method repeatability and reproducibility were around 2%. Method accuracy was better than 120%. The MDL was 0.97&nbsp;ppm. All results met the analytical requirements of regulating THC in fuel cell grade hydrogen according to SAE&nbsp;J2719 and ISO 14687.&nbsp;The applied analytical approach requires methane analysis by a separate method, which can be realized using the Agilent 990 Micro GC or using a coated column followed by FID detection on another channel of the 8890 GC system.<h3>2. BaySpec: Rapid Detection of Trace Levels of Deoxynivalenol in Wheat Flour by Portable Miniature Linear Ion Trap Mass Spectrometry</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/Bay_Spec_App_Note_MS_Portability_In_Wheat_Quality_04959a96bd.pdf">Full PDF for download</a></li></ul>Deoxynivalenol (Cas:51481‐10‐8), also known as DON, is a trichothecene mycotoxin that is widely found in grains such as wheat, barley, and rice.&nbsp;&nbsp;The molecular structure of DON is provided in figure 1.&nbsp;&nbsp;DON is linked to two plant pathogens: Fusarium graminearum (wheat and corn), and Fusarium ear blight (corn only).&nbsp; &nbsp; DON inhibits the synthesis of DNA / RNA as well as protein synthesis at the ribosomal level, ultimately resulting in the loss of yield and contamination of seeds.&nbsp;&nbsp;An acute dose of DON can induce vomiting (emesis) in pigs, whereas at lower concentrations in the diet, it reduces growth and feed consumption (anorexia).1&nbsp;The U.S. FDA has established DON advisory levels to provide safe food and feed at concentrations of &lt; 10 ppm to &lt; 1 ppm depending on application.2Because DON is difficult to derivatize, this compound is typically analyzed via thin‐layer chromatography (TLC) or high performance liquid chromatography (HPLC).3 While TLC is simple, fast, and economical, this analytical technique does not provide high accuracy nor consistent results on a day‐to‐day basis.&nbsp;&nbsp;HPLC improves on accuracy and consistency but requires large quantities of costly solvents and produces large volumes of hazardous waste.&nbsp;&nbsp; Depending on sampling requirements and system performance, the annual maintenance costs for a standard HPLC instrument can run ~$10‐20k per year.4 &nbsp;&nbsp; Furthermore, although HPLC systems can be easy to use when properly configured, a trained professional is typically needed for troubleshooting, maintenance, and developing new methods.Two samples were analyzed in a recent case study for an agricultural firm based in Canada.&nbsp;&nbsp;&nbsp;One sample contained 200 mg of wheat powder, while the other sample was 1 mg of the pure DON compound. Measurements were taken on a <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/2219">BaySpec PortabilityTM Mass Spectrometer</a> (Figure 2) with both thermal desorption (TD) electrospray ionization (ESI) and atmospheric pressure chemical ionization (APCI) methods. Samples were tested “dry” either by probing the surface of the sample vials or by spreading the powder onto a clean surface and swabbing. An enlarged image of the sampling probe with a small amount of wheat powder is shown in Figure 3.<h3>3. MDCW / JEOL: Structural elucidation using GCxGC-TOFMS and machine learning for unknown metabolites in HeLa cell</h3><ul><li>Presentation</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/O_7_Masaaki_Ubukata_2_56a67fdf00.pdf">Full PDF for download</a></li></ul>The presentation by Masaaki Ubukata focuses on advancing structural elucidation of unknown metabolites in HeLa cells using comprehensive two-dimensional gas chromatography coupled with high-resolution time-of-flight mass spectrometry (<a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?instrumentationItems=2-13-3-5&amp;mainauthorItems=23">GC×GC-HRTOFMS</a>) and machine learning. The work addresses a major limitation in metabolomics: while GC-MS offers highly reproducible EI fragmentation and strong library support, only a tiny fraction of known chemical space is represented in standard databases such as NIST (about 0.3% of compounds). To overcome this gap, the team developed an AI-based approach capable of predicting EI mass spectra and retention indices for over 200 million compounds, creating a large in-silico spectral library for unknown identification.The workflow integrates accurate mass measurements from GC-HRTOFMS with both electron ionization (EI) and soft ionization data. Molecular formulas are first determined using isotopic patterns and fragment ion accuracy, then candidate structures are narrowed using predicted retention indices and compared against AI-predicted EI spectra ranked by cosine similarity. Model performance has steadily improved, reaching an average cosine similarity of 0.86, with correct structures ranked first in 56% of evaluation cases and within the top 10 in 87% of cases. This demonstrates strong capability for resolving unknown compounds beyond conventional library searches.The approach was applied to HeLa cell metabolomics, a well-established human cell model. Using GC×GC separation, more than 800 metabolites were detected. Importantly, the system successfully identified N-methyl-uridine monophosphate (N-methyl UMP), a biologically relevant RNA-modification-related metabolite not registered in the NIST database. After molecular formula determination and AI ranking, N-methyl UMP was identified as the top candidate among 53 structural isomers sharing the same formula, demonstrating the practical strength of combining high-resolution MS, soft ionization, and AI-based spectral prediction.In conclusion, the study highlights the synergistic power of three technologies: high-resolution GC-TOFMS, soft ionization techniques, and AI-driven structural analysis. Together, they significantly enhance the identification of unknown metabolites in non-targeted metabolomics and provide a scalable solution for exploring chemical space far beyond existing experimental spectral libraries.<h3>4. Shimadzu: Analysis of Aroma Components in Apples Using the Smart Aroma Database</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_01_01016_en_e989b26b7f.pdf">Full PDF for download</a></li></ul><h5>User Benefits</h5><ul><li>The Smart Aroma Database enables straightforward qualitative analysis of aroma components.</li><li>The HS-20 NX headspace sampler allows for high-sensitivity and convenient analysis of the aroma components in fresh apples.</li><li>Multivariate analysis facilitates an objective evaluation of aroma component differences between samples.</li></ul>The aroma components of fruits are one of the key factors that determine their flavor and taste, serving as a significant criterion for consumers when choosing fruits. These aroma components vary based on the type and variety of the fruit, its ripeness, production area, and cultivation environment. The complex interplay of these factors shapes the unique flavors of individual fruits. Therefore, the analysis of aroma components plays an important role in quality control and the development of new fruit varieties. The compounds that make up the aroma of fruits are diverse, including both volatile and non-volatile components, and their numbers can range from dozens to hundreds. These components, which include alcohols, esters, ketones, and acids, possess various chemical structures and contribute to the aroma of the fruit. Gas chromatography mass spectrometry (GC/MS) offers an effective method for objectively evaluating the relationship between aroma and aroma components. This article describes an example of analyzing the aroma components in apples using a <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=1&amp;search=GCMS-QP2050">GCMS-QP2050</a> gas chromatograph mass spectrometer in combination with an<a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=1&amp;search=HS20+NX"> HS20 NX headspace sampler</a> (Fig. 1).<h4>Multivariate Analysis&nbsp;</h4>Three types of apples, with five samples each (for a total of 15 samples), were measured once. The obtained data were analyzed using SIMCA17 multivariate data analysis software (Informatics Co., Ltd.) to perform principal component analysis (PCA) and hierarchical clustering analysis. The PCA score plot (Fig. 2), loading plot (Fig. 3), and the dendrogram from the hierarchical clustering analysis (Fig. 4) are shown.&nbsp;Based on the PCA score plot, the contribution rate of the first principal component (horizontal axis) is 85.6 %, and the contribution rate of the second principal component (vertical axis) is 10.2 %, totaling 95.8 %. The clear separation of the plots by apple type indicates that there are differences in the aroma of the three varieties. Additionally, the results of the hierarchical clustering analysis show that Jonagold (A) and (B) have relatively similar compositions of aroma components.&nbsp;Table 3 shows the aroma components that are relatively abundant in Jonagold (A) along with the sensory information for each aroma component registered in the Smart Aroma Database.<h4>Conclusion&nbsp;</h4>We analyzed the aroma components of three types of commercially available apples using a GCMS-QP2050 gas chromatograph mass spectrometer. By utilizing an HS-20 NX headspace sampler, we were able to analyze the aroma components of fresh apples with high sensitivity, and the Smart Aroma Database made the process convenient.&nbsp;We consider that scientifically analyzing the differences in aroma components based on factors such as fruit type, variety, ripeness, production area, and cultivation environment is beneficial for quality management and the development of new varieties.

News from LabRulezGCMS Library - Week 10, 2026

Our Library never stops expanding. What are the most recent contributions to LabRulezGCMS Library in the week of 6th April 2026? Check out new documents from the field of the gas phase, especially GC and GC/MS techniques!<blockquote>👉 <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library">SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT GCMS AND RELATED TECHNIQUES</a></blockquote><blockquote>👉 Need info about different analytical techniques? Peek into <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library">LabRulezLCMS</a> or <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library">LabRulezICPMS</a> libraries.</blockquote>This week we bring you application notes by Agilent Technologies, BaySpec, poster by MDCW / William &amp; Mary and brochure by Shimadzu!<h3>1. Agilent Technologies: High-Throughput BTEX Analysis in Nail Products by SPME and GC/TQ</h3>Minimal steps, maximum precision<ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_btex_analysis_nail_products_spme_gctq_5994_9009en_agilent_24ef32dd13.pdf">Full PDF for download</a></li></ul>BTEX compounds—benzene, toluene, ethylbenzene, and xylenes—are volatile aromatic hydrocarbons widely used as solvents in industrial and consumer products. Among these, toluene is the most prevalent in nail polish formulations, where it serves as a solvent to dissolve resins and pigments, ensuring smooth application, uniform color dispersion, and rapid drying. Historically, these properties made toluene a preferred ingredient in nail coatings, including traditional polishes, gel formulations, and nail art products. However, its inclusion presents challenges for regulatory compliance and product reformulation. In response to these challenges, the California Department of Toxic Substances Control (DTSC) has listed nail products containing toluene as Priority Products under the Safer Consumer Products Regulations.1 Manufacturers selling such products in California must submit a Priority Product Notification and conduct an Alternative Analysis if toluene concentrations exceed the 100-ppm threshold.&nbsp;To support compliance and ensure accurate monitoring of BTEX levels in nail products, robust analytical methods are essential. Solid phase microextraction (SPME) coupled with gas chromatography/triple quadrupole mass spectrometry (GC/TQ) has emerged as a preferred approach for volatile organic compound analysis due to its solvent-free sample preparation, high sensitivity, and compatibility with complex cosmetic matrices. The 8890 GC with 7000 Series GC/TQ offers enhanced detection capabilities through dynamic multiple reaction monitoring (dMRM), enabling precise quantification of BTEX compounds at trace levels, below regulatory thresholds. This platform provides the analytical rigor required for method validation, including limits of detection, recovery, and precision, ensuring compliance with California's stringent performance criteria and supporting industry efforts toward improving consumer product&nbsp;quality.&nbsp;<h4>Experimental</h4><h5>GC/TQ analysis&nbsp;</h5>Analyses were performed on an <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=10&amp;search=8890+GC">8890 GC</a> coupled to a <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=10&amp;search=7000">7000 Series GC/TQ </a>equipped with an EI extractor ion source (Figure 2). The instrument operating parameters are listed in Table 2. The system was operated in splitless mode with an inlet temperature of 200&nbsp;°C, a purge flow of 3 mL/min, and a purge flow to split vent of 50&nbsp;mL/min at 2&nbsp;minutes. Carrier gas was helium at a constant flow of 0.693&nbsp;mL/min with a total flow of 53.7 mL/min. The chromatographic separation was accomplished on an <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=10&amp;search=DB-624+Ultra+Inert+column">Agilent J&amp;W DB-624 Ultra Inert column</a> (20&nbsp;m × 0.18&nbsp;mm, 1&nbsp;µm, part number 121-1324UI). The oven program started at 40&nbsp;°C (hold 2&nbsp;minutes), ramped at 35&nbsp;°C/min to 160&nbsp;°C, and held for 2.58&nbsp;minutes, giving a total run time of 8.0&nbsp;minutes. The transfer line was maintained at 230&nbsp;°C, with the ion source at 230&nbsp;°C and quadrupoles at 150&nbsp;°C.<h4>Conclusion&nbsp;</h4>A rapid, high-throughput headspace‑SPME GC/TQ method was developed for quantifying BTEX in nail product matrices, using a 100-µm PDMS Agilent Smart SPME fiber on an Agilent 8890 GC with Agilent 7000 Series GC/TQ. The method provides solvent-free extraction, 8-minute chromatographic runs, and an ~11-minute total cycle time, enabling high-throughput analysis with robust selectivity in dMRM mode. Quality control results demonstrated mean recoveries of 100 to 107% with RSDs ≤ 8%, meeting method acceptance criteria for compliance-focused testing for toluene. Integration of Smart SPME automation and the intelligent features of the 8890 GC and 7000 Series GC/TQ allows a practical, defensible solution for routine laboratories monitoring BTEX in nail products. Calibration performance showed high linearity and low variance across the working ranges, with all compounds meeting initial calibration criteria via R² ≥ 0.995 or average RF RSD ≤ 20%. Combined with the short cycle time and automated fiber tracking, this workflow is ideally suited for routine compliance testing of BTEX in nail products using the 8890 GC and 7000&nbsp;Series GC/TQ.<h3>2. BaySpec: Detection of residual pesticides on fruits and vegetables using Portability miniature mass s pectrometer</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/Bay_Spec_App_Note_Portability_Pesticides_4a7311fb3e.pdf">Full PDF for download</a></li></ul>Pesticides are used in a variety of different ways during the production of food. Ranging from preventing crop damage by insects, rodents and molds during growth to prolonging storage of food after harvest. Because of the frequent usage, the residual pesticides are often found in many agricultural products and their monitoring and control is an important step in achieving and maintaining overall food safety in the modern society.&nbsp;Mass spectrometry in connection with different separation techniques currently represents the main analytical approach for determination of residual pesticides in food. Traditionally, samples need to be collected and send to a laboratory for analysis using techniques such as GC-MS or HPLC-MS, which are costly and time-consuming. In addition, the conventional mass spectrometry usually requires laborious sample pretreatment, which does not allow for immediate in-situ sample determination. Presented here is an application of Thermal Desorption ElectroSpray Ionization (TD-ESI) for pesticide screening coupled to a portable mass spectrometer.&nbsp;TD-ESI is a mass spectrometry technique from the family of ambient ionization methods that utilizes very simple probing of different surfaces with no or limited sample pretreatment while it is still noted for its selective and sensitive detection capabilities. In TD-ESI a solid surface or a liquid sample is touched by a simple metallic probe that absorbs the analyte. The probe is then inserted into a heated tube and the desorbed analyte is carried by gas flow into an orthogonally mounted electrospray. The electrospraty plume extracts the analyte and further ionization and ion introduction follows the conventional electrospray mechanism.&nbsp;<a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/2219">Bayspec’s Portability mass spectrometer</a> is less than 10kg highly portable and battery operated linear ion trap mass spectrometer with atmospheric pressure inlet (API). When TD-ESI is combined with PortabilityTM then it is possible to perform fast in-field detection of analytes including residual pesticides, directly of the surfaces of fresh food products without any sample pre-treatment. Fast pesticide screening by Portability mass spectrometer can immediately disclose fake organic food products as well as to discover elevated levels of residual pesticides.&nbsp;TD-ESI-MS was used to rapidly screen residual pesticides on the surfaces of different fruits and vegetables. Direct sampling probe was used to introduce analytes from surfaces of unprocessed samples. Due to short analysis times (1-5s a sample), the technique allows for fast screening for applications in food and environmental safety. MS (as well as MS/MS) analyses can be performed on surface-residual pesticides at ppm and sub-ppm levels. The miniaturized TD-ESI ion source compatible with Portability is available from BaySpec. This ion source mounts on the Portability front inlet and does not require any additional support, external power or gases. The simple intuitive software interface is operated by touch screen and makes the instrument extremely easy to control. The external TD-ESI source is fully integrated into the main software environment and the hyphenated system is thus very user-friendly, does not require excessive training and can be operated by persons with no previous mass spectrometry experiences.<h3>3. MDCW / William &amp; Mary: Volatile Characterization of American Foulbrood Disease Using Comprehensive Two-Dimensional Gas Chromatography</h3><ul><li>Poster</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/P_15_Christensen_39521e3391.pdf">Full PDF for download</a></li></ul>American foulbrood (AFB) is a deadly disease spread by Paenibacillus larvae bacterial spores, targeting the brood stage of Apis mellifera honey bees. Broods perish in a matter of days after exposure to the spores, forming infected colloidal scales in the hive that adult bees cannot remove. 1,2 The spores are extremely persistent and resistant to typical treatment methods, which standardized the immediate euthanasia of bees and destruction of the hive and associated equipment by burning. 3 In an effort to expedite identification of the spores, scent-detection dogs have been trained for use in apiaries. Furthermore, gammairradiation has been tested as a proposed treatment method as it would offer a nondestructive alternative to sterilization.The goals of this study were to use comprehensive two-dimensional gas chromatography – time-of-flight mass spectrometry (GC×GC-TOFMS) to characterize the volatiles associated with AFB disease for understanding scent detection and to measure the effectiveness of gamma-irradiation in sterilizing these volatiles.<h4>Methods</h4>Samples included blanks, material from healthy comb, aged unsterilized diseased scales, fresh unsterilized diseased scales, and diseased scales sterilized with the proposed treatment method of gamma-irradiation. These samples were stored in headspace vials (Figure 3) in the freezer when not in use. No sample preparation was required before injection with solidphase microextraction using the LPAL-3 (CTC Analytics).Analysis was performed using a <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/37">Pegasus BT4D</a> (LECO Corporation) according to the parameters described below in Table 1. <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/41">ChromaTOF software</a> (LECO Corporation) was used to analyze the chromatographic data. Preliminary identifications were assigned to peaks using a minimum signal to noise of 200 and a minimum stick count of 3.<h4>Conclusions</h4>GC×GC-TOFMS can be used to distinguish the volatile profiles of A. mellifera samples at different stages of infection with AFB disease. Future Directions for Research:&nbsp;<ul><li>Discrimination of volatiles specific to AFB from non-specific volatiles&nbsp;</li><li>Characterization of AFB-specific volatiles for scent-detection purposes&nbsp;</li><li>Measurement of gamma-irradiation sterilization success in removing AFB volatiles</li></ul><h3>4. Shimadzu: Screening System for Phthalate Esters, Brominated Flame Retardants and Other Regulated Substances Py-Screener Ver.3</h3><ul><li>Brochure</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/c146_e507_45f041b0d7.pdf">Full PDF for download</a></li></ul>The <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=1&amp;search=Py-Screener">Py-Screener™ Ver. 3</a> can screen for 7 types of phthalate esters and brominated flame retardants (PBBs, PBDEs), including substances regulated under the RoHS Directive. In addition, it can also test for PIP (3:1), which is regulated under the US TSCA (Toxic Substances Control Act), as well as UV-328, Dechlorane Plus (DP), and short-chain chlorinated paraffins (SCCPs) and medium-chain chlorinated paraffins (MCCPs), which are regulated under the Stockholm Convention (POPs Convention) on Persistent Organic Pollutants (POPs). These regulated compounds, thermally extracted from the sample by Pyrolysis-GC-MS (Py-GC-MS), are selectively detected and quantified. Py-Screener Ver. 3 consists of dedicated software for easy screening, special standard samples, and a sampling tool kit, making it simple to operate even for first-time users.<h5>Shimadzu Corporation’s Solutions for Complying with International Hazardous Substance Regulations</h5>When manufacturing and exporting products, it is necessary to comply with the chemical and hazardous substance regulations established by each country. Products contain many parts and use various materials and substances. Therefore, it is the manufacturer’s responsibility to manage the entire supply chain to ensure that harmful substances are not contained. Shimadzu Corporation provides analysis solutions that comply with these regulations.<h5>Applicable Systems and Software</h5><ul><li>GC-MS: <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=1&amp;search=GCMS-QP2020+NX">GCMS-QP™2020 NX</a>, <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=1&amp;search=GCMS-QP2020">GCMS-QP2020,</a> <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=1&amp;search=GCMS-QP2010+Ultra">GCMS-QP2010 Ultra</a></li><li>Pyrolyzer: <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=42&amp;search=EGA%2FPY-3030D">EGA/PY-3030D</a> multi-shot pyrolyzer</li><li>Autosampler: AS-2020E, <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=42&amp;search=AS-1020E">AS-1020E auto-shot sampler&nbsp;</a></li><li>GC-MS Workstation: <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=1&amp;search=GCMSsolution">GCMSsolution</a>™ (Ver. 4.60SP2 or later) + <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=1&amp;search=LabSolutions+Insight">LabSolutions Insight</a>™ (Ver. 5.0 or later)</li><li>Py Workstation: EGA-PY3030 program (Ver. 1.54 or later)</li></ul>

News from LabRulezGCMS Library - Week 15, 2026

Our Library never stops expanding. What are the most recent contributions to LabRulezGCMS Library in the week of 13th April 2026? Check out new documents from the field of the gas phase, especially GC and GC/MS techniques!<blockquote>👉 <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library">SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT GCMS AND RELATED TECHNIQUES</a></blockquote><blockquote>👉 Need info about different analytical techniques? Peek into <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library">LabRulezLCMS</a> or <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library">LabRulezICPMS</a> libraries.</blockquote>This week we bring you application notes by Agilent Technologies, BaySpec, and Shimadzu and presentation by MDCW / SepSolve!<h3>1. Agilent Technologies: Sensitive and Reproducible Determination of Nitrosamines by GC/MSD</h3>Analysis of seven nitrosamines using the <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=10&amp;search=5977+GC%2FMSD">Agilent 5977 GC/MSD</a> in positive chemical ionization mode with ammonia<ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_nitrosamines_5977_gc_ms_5994_9063en_agilent_acf455cd8e.pdf">Full PDF for download</a></li></ul>Nitrosamines are a well known class of carcinogenic compounds that have been the subject of extensive scientific investigation and regulatory assessment for several decades.1 In recent years, various regulatory authorities have established drinking water guidelines for N-nitrosodimethylamine (NDMA), a disinfection byproduct of water treatment processes.&nbsp;In 2004, the US Environmental Protection Agency (EPA) published Method 521, a GC/MS-based method for the analysis of seven nitrosamines including NDMA in drinking water, supporting monitoring and regulatory programs.2 In 2010, Health Canada proposed a maximum acceptable concentration for NDMA in drinking water of 40&nbsp;ng/L.3 In the European Union (EU), several EU member states have introduced their own national limits for nitrosamines in drinking water. In Germany, for example, a concentration of 10&nbsp;ng/L will trigger the initiation of remedial actions to reduce the concentration of NDMA.4&nbsp;This application note demonstrates the ability of the <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=10&amp;search=5977+GC%2FMSD">Agilent&nbsp;5977 Series GC/MSD</a> to enable linear and reproducible detection of the seven nitrosamines included in EPA Method&nbsp;521 using positive chemical ionization (PCI) with&nbsp;ammonia.&nbsp;Chemical ionization (CI) is a soft ionization technique used in mass spectrometry that enhances molecular ion visibility through controlled ion–molecule reactions. In CI, a reagent gas is ionized first, and the resulting reagent ions subsequently transfer charge to the analyte, producing significantly less fragmentation than conventional electron ionization (EI).&nbsp;PCI further improves sensitivity by generating predominantly protonated molecular ions [M +H]+ , concentrating the ion signal into a high-abundance species and delivering a stronger response and improved signal-to-noise ratios for trace-level compounds. Ammonia is an especially effective reagent gas for PCI due to its clean and efficient proton‑transfer chemistry, low background spectral contribution, and ability to produce stable, high-intensity molecular ions.&nbsp;These characteristics make ammonia PCI a highly suitable ionization mode for the sensitive and selective analysis of small polar contaminants such as nitrosamines, where low‑level detection and confident molecular ion identification are critical.<h4>Conclusion&nbsp;</h4>The study has shown that the Agilent 5977 GC/MSD, operated in PCI mode with ammonia, delivers the sensitivity, accuracy, and reproducibility needed for trace-level nitrosamine&nbsp;analysis. The method demonstrated excellent linearity, with regression coefficients (R²) of 0.9989 or better across the 0.1 to 20.0&nbsp;ppb range for six nitrosamines, and 0.9987 across the 0.5 to 20.0&nbsp;ppb range for NPYR. Analytical repeatability was robust, with %RSD values &lt; 4.8% at the lowest calibration level, indicating a stable and consistent instrument response. Instrument Detection Limits ranged from 0.0063 to 0.0655&nbsp;ppb, demonstrating the system's ability to reliably distinguish analyte signals from instrumental noise. Overall, these results confirm the suitability of the 5977 GC/MSD as a sensitive and dependable platform for nitrosamine analysis in applications that require stringent trace‑level detection<h3>2. BaySpec: Peptide sequencing using <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/2218">Continuity miniature mass spectrometer</a></h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/Bay_Spec_App_Note_Peptide_Sequencing_002_af7ca2496c.pdf">Full PDF for download</a></li></ul>Peptide identification and sequencing strategies by mass spectrometry have been very well-developed during the last 25 years after the soft ionization techniques have been introduced. When sequencing peptides with tandem mass spectrometry (MSn), peptides are cleaved at various locations off their backbones to generate fragment ions of different masses based on their amino acid sequences. The most common product ions are the b-, y-, and a-ions generated from the cleavage of amide bond (CO-NH) and the subsequent loss of CO from the b-ions to form a-ions. The resulting MSn spectra can be matched with a database or computed with an algorithm to get the original sequence of known or unknown peptides.&nbsp;Here we present an example of peptide sequencing with BaySpec’s highly-portable (22 kg) and battery operated Continuity -series portable mass spectrometer. It features a linear ion trap with collisionally induced dissociation (CID) for MSn analysis, similar to the <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/2219">Portability series mass spectrometers</a>. In addition, Continuity is equipped with a continuous atmospheric pressure sampling inlet with differential pumping, allowing the detection of a larger mass range (110 – 950 amu). BaySpec’s Continuity mass spectrometer is ideal for on-site peptide sequencing. In this application note, we show an example of peptide sequencing in a standard mixture (H2016, SigmaAldrich) with Continuity mass spectrometer. The mixture was dissolved in HPLC grade water, and then further diluted with an electrospray solution (50:50 methanol:water with 0.5% acetic acid). The diluted solution is directly infused into the API inlet of the Continuity mass spectrometer without any further treatment or separation.<h4><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/2218">ContinuityTM Mass Spectrometer&nbsp;</a></h4>The Continuity mass spectrometer is one of BaySpec’s newest portable instruments. Continuity features a continuous sampling atmospheric pressure inlet, wide mass range and high sensitivity. Designed to bring the benefits of powerful mass to the field, the Continuity can service a variety of bulk or trace detection applications, as well as scientific studies.<h3>3. MDCW / SepSolve: Sniff smarter: Empowering GC–O with trap-based enrichment and GC×GC for advanced aroma profiling</h3><ul><li>Presentation</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/O_5_Mikaliunaite_29610bc29d.pdf">Full PDF for download</a></li></ul>The presentation focuses on improving the correlation between chemical analysis and human sensory perception in complex samples such as food matrices. Traditional gas chromatography–olfactometry (GC–O) workflows face two major limitations: the presence of trace-level odorants with extremely low odour detection thresholds and the frequent co-elution of compounds, which makes it difficult to assign specific sensory attributes to individual analytes. As highlighted in the early slides, these challenges often result in discrepancies between what instruments detect and what the human nose perceives .To address these issues, the study introduces trap-based enrichment as a key enhancement step. This approach enables pre-concentration and focusing of volatile organic compounds (VOCs) prior to GC analysis, while selectively removing interferents such as water and air. The use of electrically cooled traps allows efficient analyte retention and rapid thermal desorption, improving sensitivity without the need for cryogens. Importantly, this enrichment strategy enhances the detectability of trace odorants, enabling better alignment between instrumental signals and sensory perception.A second major advancement presented is the integration of comprehensive two-dimensional gas chromatography (GC×GC) coupled with TOF-MS and olfactory detection (GC×GC–O–TOF MS). Compared to conventional one-dimensional GC, GC×GC significantly increases separation capacity, effectively resolving co-eluting compounds. This enables more confident identification of odor-active compounds and clearer mapping between chromatographic peaks and recorded aroma descriptors. The workflow also incorporates an odour detection port (ODP), allowing simultaneous acquisition of chromatographic and sensory data, thereby bridging the gap between analytical chemistry and human olfaction.The methodology is demonstrated using real-world applications, including citrus rind and orange juice analysis, where complex aroma profiles are investigated. The results show that GC×GC combined with enrichment and advanced data processing (e.g., Smart Subtract®) enables detailed comparison of sample variants (e.g., juice with vs. without pulp) and identification of subtle compositional differences. Overall, the study highlights that combining trap-based enrichment, GC×GC separation, and integrated sensory detection provides a powerful platform for comprehensive aroma profiling, improving both sensitivity and interpretability in flavour and fragrance analysis<h3>4. Shimadzu: Dual-line Gas Analysis Using a <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=1&amp;search=gc-2060">Nexis GC-2060</a> Gas Chromatograph with a <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=1&amp;search=GI-30+Auto+Gas+Injector">GI-30 Auto Gas Injector</a> and BID and TCD Detectors</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_01_01171_en_5a83027622.pdf">Full PDF for download</a></li></ul><h5>User Benefits</h5><ul><li>The Nexis GC-2060 can be equipped with two GI-30 units, enabling automated gas analysis for two sample lines on a single GC.&nbsp;</li><li>The combination of TCD and BID detectors enables analysis of a wide range of sample concentrations.&nbsp;</li><li>Using the GI-30 auto gas injector enables automated gas-sample introduction with high repeatability</li></ul>Gas analysis is performed across a wide range of fields, including resource and energy applications and environmental applications. Typical target analytes include inorganic gases such as H2, N2, CO, and CO2, as well as light hydrocarbon gases such as CH4. Because concentration ranges and matrices vary depending on the sample, detection sensitivity and separation performance must be optimized to meet the measurement objective.&nbsp;Both BID and TCD detectors can detect all compounds except carrier gases (BID cannot detect Ne). The BID is a Shimadzudeveloped detector that enables highly sensitive analysis of lowlevel components at the ppm level and simultaneous analysis of multiple compounds, including H2. In contrast, the TCD provides stable analysis even at high concentrations on the order of percent, and it also has a short time from startup to analysis readiness. Using both detectors together allows a single GC system to cover a wide concentration range from low to high.&nbsp;This article describes dual-line gas analysis using a Nexis GC-2060 equipped with both a BID and a TCD, combined with automated sample introduction using the GI-30 auto gas injector. By combining a BID and a TCD,samples across a broad concentration range can be measured. In addition, automated introduction of gas samples using the GI-30 improves repeatability in continuous analysis and enhances operational efficiency.<h4>Dual-LineGas Analysis Using the GI-30</h4>The GI-30 is an auto gas injector that enables automated, continuous analysis of gas samples (Fig. 1 (right) shows a schematic diagram of the GI-30). With its highly expandable design, the <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=1&amp;search=gc-2060">Nexis GC-2060 </a>can be equipped with two <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=1&amp;search=GI-30+Auto+Gas+Injector">GI-30</a> units (Fig. 1 (left)). This enables high-throughput automated gas analysis of two sample lines on a single GC. In addition, because the injection unit, column, detector, and carrier gas can be configured independently for each line, the system can accommodate gas samples with diverse compositions and concentrations. In this application, Line 1 was configured with an SPI/BID to provide highly sensitive detection of low-level components. The SPI is a split/splitless injection unit dedicated to gas analysis. Its high airtightness and inert deactivation of the flow path help suppress ambient air intrusion and analyte adsorption, making it effective for analyzing trace atmospheric components (e.g., N2 and O2) and components that tend to adsorb. In contrast, Line 2 was configured with an SPL/TCD. Using an SPL injection unit also allows liquid sample analysis and manual injection with a gas-tight syringe.<h4>Conclusion</h4>Low- and high-concentration gas samples were analyzed simultaneously on two lines using a Nexis GC-2060 equipped with two GI-30 units and a BID/TCD. By adopting a dual-line configuration with dual GI-30 units and selecting the injection unit, column, detector, and carrier gas according to the measurement objective, it is possible to expand the range of sample concentrations and compositions that can be measured. In addition, automated, continuous gas analysis using the GI-30 reduces the analyst’s workload and enables highly repeatable analysis that is difficultto achieve with manual introduction.

News from LabRulezGCMS Library - Week 16, 2026

Article

Product

Events

Webinars

Application

Academy

Video

Poster

Scientists

Plastics

Environment

Food

Water

Health

Presentation

Scientific article

Interview

Toxicology

Popularization

Science and research

Software

Covid-19

Career

Laboratories

Various

Zaměření

Type of News

Focus

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

European Symposium on Analytical Spectrometry (ESAS) 2026

PFAS Seminar Series

Building regulatory readiness for nitrosamine testing

From Legacy Workflows to Paperless Labs: Track Every Sample, Process, and Decision

Informatics series #34 Ready for Self-Documenting Chromatography?

Ask the Expert: What to expect from the new Thermo Scientific™ Orbitrap™ Excedion™ Hybrid mass spectrometers